Dock: review cleanups - hover pending enum, FloatFrame, comment fixes

- dock_hover_pending is an Option<HoverPending> (Reveal / Hide) instead
  of a nested Option.
- dock_float_frame returns a FloatFrame with width() and bar_x(), so the
  floating menu no longer repeats the frame-width formula.
- Put dock_reveal's doc comment back on dock_reveal, and the group-move
  comment back above the match it describes.

No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt

src/app/dock/update.rs

@@ -30,7 +30,7 @@ impl OpenCADStudio {
     /// whichever panel the message names.
     pub(crate) fn on_dock(&mut self, m: crate::ui::dock::DockMsg) -> iced::Task<Message> {
         use crate::app::config::DockSide;
-        use crate::ui::dock::{DockDrag, DockMsg, DropTarget, FloatPanel};
+        use crate::ui::dock::{DockDrag, DockMsg, DropTarget, FloatPanel, HoverPending};
         match m {
             DockMsg::DockGrab(id) => self.dock_begin(DockDrag::moving(id, None), Some(id)),
             DockMsg::IconPress(id) => {
@@ -160,7 +160,7 @@ impl OpenCADStudio {
                     if self.dock_peek == Some(id) {
                         self.dock_hover_cancel();
                     } else {
-                        return self.dock_hover_arm(Some(id));
+                        return self.dock_hover_arm(HoverPending::Reveal(id));
                     }
                 }
             }
@@ -173,21 +173,25 @@ impl OpenCADStudio {
                 if self.dock_drag.is_none()
                     && self.dock_peek.is_some_and(|id| self.dock.auto_hides(id))
                 {
-                    return self.dock_hover_arm(None);
+                    return self.dock_hover_arm(HoverPending::Hide);
                 }
                 // Left before a pending reveal ran out: it never happens.
                 self.dock_hover_cancel();
             }
             DockMsg::HoverStay => {
-                if self.dock_hover_pending == Some(None) {
+                if self.dock_hover_pending == Some(HoverPending::Hide) {
                     self.dock_hover_cancel();
                 }
             }
             DockMsg::HoverSettled(gen) => {
                 if gen == self.dock_hover_gen && self.dock_drag.is_none() {
                     match self.dock_hover_pending.take() {
-                        Some(Some(id)) if self.dock.auto_hides(id) => self.dock_reveal(id),
+                        Some(HoverPending::Reveal(id)) if self.dock.auto_hides(id) => {
-                        Some(None) if self.dock_peek.is_some_and(|id| self.dock.auto_hides(id)) => {
+                            self.dock_reveal(id)
+                        }
+                        Some(HoverPending::Hide)
+                            if self.dock_peek.is_some_and(|id| self.dock.auto_hides(id)) =>
+                        {
                             self.dock_peek = None;
                         }
                         _ => {}
@@ -280,13 +284,13 @@ impl OpenCADStudio {
                     grab
                 };
                 let target = if started {
-                    // A whole group only moves between group positions: it
-                    // cannot join another group or float.
                     // A floating panel that may not dock only floats.
                     let found = match self.dock.float_rect(panel) {
                         Some(f) if !f.docking => self.dock_float_target(point, grab),
                         _ => self.dock_drop_target(point, grab),
                     };
+                    // A whole group only moves between group positions: it
+                    // cannot join another group or float.
                     match (group, found) {
                         (Some(_), found @ DropTarget::Edge { .. }) | (None, found) => Some(found),
                         (Some(_), _) => None,
@@ -381,11 +385,9 @@ impl OpenCADStudio {
         }
     }
 
-    /// Bring `id` into view: show its group on its edge and, where it
+    /// Arm a delayed reveal or hide; it applies when its timer reports back
-    /// auto-hides, keep it revealed until the pointer leaves.
+    /// unless a newer hover superseded it.
-    /// Arm a delayed reveal (`Some`) or hide (`None`); it applies when its
+    fn dock_hover_arm(&mut self, target: crate::ui::dock::HoverPending) -> iced::Task<Message> {
-    /// timer reports back unless a newer hover superseded it.
-    fn dock_hover_arm(&mut self, target: Option<crate::ui::dock::PanelId>) -> iced::Task<Message> {
         self.dock_hover_gen = self.dock_hover_gen.wrapping_add(1);
         self.dock_hover_pending = Some(target);
         let gen = self.dock_hover_gen;
@@ -400,6 +402,8 @@ impl OpenCADStudio {
         self.dock_hover_pending = None;
     }
 
+    /// Bring `id` into view: show its group on its edge and, where it
+    /// auto-hides, keep it revealed until the pointer leaves.
     pub(crate) fn dock_reveal(&mut self, id: crate::ui::dock::PanelId) {
         self.dock.show_group_of(id);
         self.dock_peek = Some(id);

src/app/dock/view.rs

@@ -444,7 +444,7 @@ impl OpenCADStudio {
         tab: &'a DocumentTab,
     ) -> Element<'a, Message> {
         use crate::ui::dock::DockMsg;
-        let (x, y, bar_left, hidden) = self.dock_float_frame(f);
+        let FloatFrame { x, y, bar_left, hidden } = self.dock_float_frame(f);
         let hovered = self.dock_title_hover == Some(f.id);
         let bar = floating_title_bar(f.id, self.dock.auto_collapse(f.id), bar_left, hovered);
         let content: Element<'_, Message> = if hidden {
@@ -519,10 +519,8 @@ impl OpenCADStudio {
         place_at(panel.into(), x, y)
     }
 
-    /// Where floating panel `f` draws: its top-left corner, whether its
+    /// Where floating panel `f` draws.
-    /// title bar is on the left, and whether it is hidden down to that bar
+    fn dock_float_frame(&self, f: crate::ui::dock::FloatPanel) -> FloatFrame {
-    /// (auto-hide, not hovered).
-    fn dock_float_frame(&self, f: crate::ui::dock::FloatPanel) -> (f32, f32, bool, bool) {
         let (ww, wh) = self.dock_workspace_size();
         // The bar faces the nearer workspace edge; while resizing, it stays
         // opposite the grip being dragged so it cannot flip mid-drag.
@@ -533,13 +531,15 @@ impl OpenCADStudio {
             _ => f.x + (f.w + DOCK_FLOAT_BAR_W) * 0.5 < ww * 0.5,
         };
         let hidden = self.dock.auto_collapse(f.id) && self.dock_peek != Some(f.id);
-        let total_w = if hidden { DOCK_FLOAT_BAR_W } else { f.w + DOCK_FLOAT_BAR_W };
         // A hidden panel keeps its title bar where it sits when shown.
         let x = if hidden && !bar_left { f.x + f.w } else { f.x };
+        let frame = FloatFrame { x, y: f.y, bar_left, hidden };
         // Keep the panel on screen when the window shrank since it was placed.
-        let x = x.min(ww - total_w).max(0.0);
+        FloatFrame {
-        let y = f.y.min(wh - f.h).max(0.0);
+            x: x.min(ww - frame.width(f)).max(0.0),
-        (x, y, bar_left, hidden)
+            y: f.y.min(wh - f.h).max(0.0),
+            ..frame
+        }
     }
 
     /// The open right-click menu of a floating title bar: Allow docking,
@@ -554,11 +554,12 @@ impl OpenCADStudio {
             return None;
         }
         let (ww, wh) = self.dock_workspace_size();
-        let (x, y, bar_left, hidden) = self.dock_float_frame(f);
+        let frame = self.dock_float_frame(f);
-        let total_w = if hidden { DOCK_FLOAT_BAR_W } else { f.w + DOCK_FLOAT_BAR_W };
-        let bar_x = if bar_left { x } else { x + total_w - DOCK_FLOAT_BAR_W };
         // Where the right-click happened, in the workspace.
-        let at = iced::Point::new(bar_x + self.dock_float_menu_at.x, y + self.dock_float_menu_at.y);
+        let at = iced::Point::new(
+            frame.bar_x(f) + self.dock_float_menu_at.x,
+            frame.y + self.dock_float_menu_at.y,
+        );
         let menu_x = if at.x + DOCK_MENU_W <= ww { at.x } else { at.x - DOCK_MENU_W };
         let menu_x = menu_x.clamp(0.0, (ww - DOCK_MENU_W).max(0.0));
         let menu_y = at.y.min(wh - FLOAT_MENU_H).max(0.0);
@@ -880,6 +881,38 @@ impl canvas::Program<Message> for VBarLabel {
 /// Width of a floating panel's vertical title bar.
 const DOCK_FLOAT_BAR_W: f32 = 28.0;
 
+/// Where a floating panel draws: its top-left corner, whether its title bar
+/// is on the left, and whether it is hidden down to that bar (auto-hide, not
+/// hovered).
+#[derive(Debug, Clone, Copy)]
+struct FloatFrame {
+    x: f32,
+    y: f32,
+    bar_left: bool,
+    hidden: bool,
+}
+
+impl FloatFrame {
+    /// On-screen width of panel `f` in this frame: the bar, plus the panel
+    /// unless hidden.
+    fn width(&self, f: crate::ui::dock::FloatPanel) -> f32 {
+        if self.hidden {
+            DOCK_FLOAT_BAR_W
+        } else {
+            f.w + DOCK_FLOAT_BAR_W
+        }
+    }
+
+    /// Left edge of the title bar.
+    fn bar_x(&self, f: crate::ui::dock::FloatPanel) -> f32 {
+        if self.bar_left {
+            self.x
+        } else {
+            self.x + self.width(f) - DOCK_FLOAT_BAR_W
+        }
+    }
+}
+
 /// A floating panel's vertical title bar: close then the hide (auto-collapse)
 /// pin at the top, the panel's icon at the bottom with its title reading
 /// upward above it. Pressing the bar's free area drags the panel.

src/app/mod.rs

@@ -850,9 +850,9 @@ pub(super) struct OpenCADStudio {
     /// floating frame): hovered, being dragged, or just opened. Cleared when
     /// the pointer leaves.
     pub(crate) dock_peek: Option<crate::ui::dock::PanelId>,
-    /// Reveal (`Some(pallet)`) or hide (`None`) waiting out the hover delay,
+    /// Reveal or hide waiting out the hover delay, with the generation its
-    /// with the generation its timer carries; any newer hover supersedes it.
+    /// timer carries; any newer hover supersedes it.
-    pub(crate) dock_hover_pending: Option<Option<crate::ui::dock::PanelId>>,
+    pub(crate) dock_hover_pending: Option<crate::ui::dock::HoverPending>,
     pub(crate) dock_hover_gen: u64,
     /// What the pointer is dragging in the dock (pallet, group, width,
     /// splitter, floating size, Layer Manager column).

src/ui/dock.rs

@@ -86,6 +86,15 @@ pub enum DockMsg {
     HoverSettled(u64),
 }
 
+/// An auto-hide change waiting out [`DOCK_HOVER_DELAY`].
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum HoverPending {
+    /// Reveal this pallet (its group, or its floating frame).
+    Reveal(PanelId),
+    /// Hide whatever auto-hiding pallet is revealed.
+    Hide,
+}
+
 /// How long the pointer must rest before an auto-hiding group reveals or
 /// hides, so passing over the strip doesn't flash groups open.
 pub const DOCK_HOVER_DELAY: std::time::Duration = std::time::Duration::from_millis(150);