feat(ui): feature-parity context menu — Snap Overrides, transparent Pan/Zoom, ARC keyword flow

The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.

ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.

Object snaps gain a one-shot "None" override. New strings in all locales.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
PanosandClaude Opus 5 committed 2026-09-17 12:05:15 +03:00
1 parent 96df4928c7
commit 02cd98e790
34 files changed
+1305 -67

No files matched your search

+13
View File
@@ -2865,6 +2865,15 @@ draw =
.center-keyword = المركز
.close-keyword = إغلاق
.second-pt = النقطة الثانية
.arc-specify-start-point-of-arc = ARC حدد نقطة بداية القوس:
.arc-specify-second-point-of-arc = ARC حدد النقطة الثانية للقوس:
.arc-specify-end-point-of-arc = ARC حدد نقطة نهاية القوس:
.arc-specify-center-point-of-arc = ARC حدد مركز القوس:
.arc-specify-included-angle = ARC حدد الزاوية المحصورة:
.arc-specify-length-of-chord = ARC حدد طول الوتر:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC حدد اتجاه المماس عند نقطة بداية القوس:
.arc-specify-radius-of-arc = ARC حدد نصف قطر القوس:
.chord-length = طول الوتر
modify =
.add-vertex = إضافة رأس
@@ -5322,6 +5331,10 @@ ui =
.deselect-all = إلغاء تحديد الكل
.options-ellipsis = خيارات...
.base-point = نقطة الأساس
.snap-overrides = تجاوزات الالتقاط
.mid-between-2-points = المنتصف بين نقطتين
.osnap-settings = إعدادات الالتقاط...
.snap-override-none-next-pick-only = تجاوز الالتقاط: بدون (للاختيار التالي فقط).
dimstyle =
.keep-text-between-extension-lines = إبقاء النص دائمًا بين خطوط الامتداد
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = Център
.close-keyword = Затвори
.second-pt = Втора точка
.arc-specify-start-point-of-arc = ARC Задайте начална точка на дъгата:
.arc-specify-second-point-of-arc = ARC Задайте втора точка на дъгата:
.arc-specify-end-point-of-arc = ARC Задайте крайна точка на дъгата:
.arc-specify-center-point-of-arc = ARC Задайте център на дъгата:
.arc-specify-included-angle = ARC Задайте вписан ъгъл:
.arc-specify-length-of-chord = ARC Задайте дължина на хордата:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Задайте посока на допирателната в началото на дъгата:
.arc-specify-radius-of-arc = ARC Задайте радиус на дъгата:
.chord-length = Дължина на хордата
modify =
.add-vertex = Добавяне на връх
@@ -5310,6 +5319,10 @@ ui =
.deselect-all = Отмяна на избора
.options-ellipsis = Опции...
.base-point = Базова точка
.snap-overrides = Временни прихващания
.mid-between-2-points = Средата между 2 точки
.osnap-settings = Настройки на прихващане...
.snap-override-none-next-pick-only = Временно прихващане: Няма (само за следващата точка).
dimstyle =
.keep-text-between-extension-lines = Винаги пази текста между удължителните линии
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = Střed
.close-keyword = Uzavřít
.second-pt = Druhý bod
.arc-specify-start-point-of-arc = ARC Zadejte počáteční bod oblouku:
.arc-specify-second-point-of-arc = ARC Zadejte druhý bod oblouku:
.arc-specify-end-point-of-arc = ARC Zadejte koncový bod oblouku:
.arc-specify-center-point-of-arc = ARC Zadejte střed oblouku:
.arc-specify-included-angle = ARC Zadejte středový úhel:
.arc-specify-length-of-chord = ARC Zadejte délku tětivy:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Zadejte směr tečny v počátečním bodě oblouku:
.arc-specify-radius-of-arc = ARC Zadejte poloměr oblouku:
.chord-length = Délka tětivy
modify =
.add-vertex = Přidat vrchol
@@ -5307,6 +5316,10 @@ ui =
.deselect-all = Zrušit výběr
.options-ellipsis = Možnosti...
.base-point = Referenční bod
.snap-overrides = Dočasné uchopení
.mid-between-2-points = Střed mezi 2 body
.osnap-settings = Nastavení uchopení...
.snap-override-none-next-pick-only = Dočasné uchopení: Žádné (jen pro další bod).
dimstyle =
.keep-text-between-extension-lines = Vždy ponechte text mezi vynášecími řádky
+13
View File
@@ -2853,6 +2853,15 @@ draw =
.center-keyword = Zentrum
.close-keyword = Schließen
.second-pt = Zweiter Punkt
.arc-specify-start-point-of-arc = ARC Startpunkt des Bogens angeben:
.arc-specify-second-point-of-arc = ARC Zweiten Punkt des Bogens angeben:
.arc-specify-end-point-of-arc = ARC Endpunkt des Bogens angeben:
.arc-specify-center-point-of-arc = ARC Mittelpunkt des Bogens angeben:
.arc-specify-included-angle = ARC Eingeschlossenen Winkel angeben:
.arc-specify-length-of-chord = ARC Sehnenlänge angeben:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Tangentenrichtung am Bogenanfang angeben:
.arc-specify-radius-of-arc = ARC Radius des Bogens angeben:
.chord-length = Sehnenlänge
modify =
.add-vertex = Scheitelpunkt hinzufügen
@@ -5308,6 +5317,10 @@ ui =
.deselect-all = Auswahl aufheben
.options-ellipsis = Optionen...
.base-point = Basispunkt
.snap-overrides = Fang-Überschreibungen
.mid-between-2-points = Mitte zwischen 2 Punkten
.osnap-settings = Objektfang-Einstellungen...
.snap-override-none-next-pick-only = Fang-Überschreibung: Keine (nur nächster Punkt).
dimstyle =
.keep-text-between-extension-lines = Text immer zwischen Hilfslinien halten
+13
View File
@@ -2853,6 +2853,15 @@ draw =
.center-keyword = Κέντρο
.close-keyword = Κλείσιμο
.second-pt = Δεύτερο σημείο
.arc-specify-start-point-of-arc = ARC Ορίστε αρχικό σημείο τόξου:
.arc-specify-second-point-of-arc = ARC Ορίστε δεύτερο σημείο τόξου:
.arc-specify-end-point-of-arc = ARC Ορίστε τελικό σημείο τόξου:
.arc-specify-center-point-of-arc = ARC Ορίστε κέντρο τόξου:
.arc-specify-included-angle = ARC Ορίστε περιεχόμενη γωνία:
.arc-specify-length-of-chord = ARC Ορίστε μήκος χορδής:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Ορίστε διεύθυνση εφαπτομένης στην αρχή του τόξου:
.arc-specify-radius-of-arc = ARC Ορίστε ακτίνα τόξου:
.chord-length = Μήκος χορδής
modify =
.count-objects = (__ocs_arg_count__ αντικείμενα)
@@ -5310,6 +5319,10 @@ ui =
.deselect-all = Αποεπιλογή όλων
.options-ellipsis = Επιλογές...
.base-point = Σημείο βάσης
.snap-overrides = Προσωρινές έλξεις
.mid-between-2-points = Μέσο μεταξύ 2 σημείων
.osnap-settings = Ρυθμίσεις έλξης...
.snap-override-none-next-pick-only = Προσωρινή έλξη: Καμία (μόνο για το επόμενο σημείο).
dimstyle =
.keep-text-between-extension-lines = Το κείμενο να παραμένει πάντα μεταξύ των γραμμών προέκτασης
+13
View File
@@ -2854,6 +2854,15 @@ draw =
.center-keyword = CEnter
.close-keyword = CLose
.second-pt = Second pt
.arc-specify-start-point-of-arc = ARC Specify start point of arc:
.arc-specify-second-point-of-arc = ARC Specify second point of arc:
.arc-specify-end-point-of-arc = ARC Specify end point of arc:
.arc-specify-center-point-of-arc = ARC Specify center point of arc:
.arc-specify-included-angle = ARC Specify included angle:
.arc-specify-length-of-chord = ARC Specify length of chord:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Specify tangent direction for the start point of arc:
.arc-specify-radius-of-arc = ARC Specify radius of arc:
.chord-length = chord Length
modify =
.count-objects = (__ocs_arg_count__ objects)
@@ -5311,6 +5320,10 @@ ui =
.deselect-all = Deselect All
.options-ellipsis = Options...
.base-point = Base Point
.snap-overrides = Snap Overrides
.mid-between-2-points = Mid Between 2 Points
.osnap-settings = Osnap Settings...
.snap-override-none-next-pick-only = Snap override: None (next pick only).
dimstyle =
.keep-text-between-extension-lines = Always keep text between extension lines
+13
View File
@@ -2853,6 +2853,15 @@ draw =
.center-keyword = Centro
.close-keyword = Cerrar
.second-pt = Segundo punto
.arc-specify-start-point-of-arc = ARC Precise punto inicial del arco:
.arc-specify-second-point-of-arc = ARC Precise segundo punto del arco:
.arc-specify-end-point-of-arc = ARC Precise punto final del arco:
.arc-specify-center-point-of-arc = ARC Precise centro del arco:
.arc-specify-included-angle = ARC Precise ángulo incluido:
.arc-specify-length-of-chord = ARC Precise longitud de la cuerda:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Precise dirección tangente en el punto inicial del arco:
.arc-specify-radius-of-arc = ARC Precise radio del arco:
.chord-length = Longitud de cuerda
modify =
.add-vertex = Añadir vértice
@@ -5310,6 +5319,10 @@ ui =
.deselect-all = Anular selección
.options-ellipsis = Opciones...
.base-point = Punto base
.snap-overrides = Referencias temporales
.mid-between-2-points = Punto medio entre 2 puntos
.osnap-settings = Parámetros de referencia...
.snap-override-none-next-pick-only = Referencia temporal: Ninguna (solo el siguiente punto).
dimstyle =
.keep-text-between-extension-lines = Mantener siempre el texto entre las líneas de referencia
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = Keskipiste
.close-keyword = Sulje
.second-pt = Toinen piste
.arc-specify-start-point-of-arc = ARC Määritä kaaren alkupiste:
.arc-specify-second-point-of-arc = ARC Määritä kaaren toinen piste:
.arc-specify-end-point-of-arc = ARC Määritä kaaren päätepiste:
.arc-specify-center-point-of-arc = ARC Määritä kaaren keskipiste:
.arc-specify-included-angle = ARC Määritä keskuskulma:
.arc-specify-length-of-chord = ARC Määritä jänteen pituus:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Määritä tangentin suunta kaaren alkupisteessä:
.arc-specify-radius-of-arc = ARC Määritä kaaren säde:
.chord-length = Jänteen pituus
modify =
.add-vertex = Lisää kärkipiste
@@ -5307,6 +5316,10 @@ ui =
.deselect-all = Poista valinta
.options-ellipsis = Asetukset...
.base-point = Peruspiste
.snap-overrides = Tilapäiset tartunnat
.mid-between-2-points = 2 pisteen keskikohta
.osnap-settings = Tartunta-asetukset...
.snap-override-none-next-pick-only = Tilapäinen tartunta: Ei mitään (vain seuraava piste).
dimstyle =
.keep-text-between-extension-lines = Pidä teksti aina jatkorivien välissä
+13
View File
@@ -2853,6 +2853,15 @@ draw =
.center-keyword = Centre
.close-keyword = Clore
.second-pt = Second point
.arc-specify-start-point-of-arc = ARC Spécifiez le point de départ de l'arc :
.arc-specify-second-point-of-arc = ARC Spécifiez le second point de l'arc :
.arc-specify-end-point-of-arc = ARC Spécifiez l'extrémité de l'arc :
.arc-specify-center-point-of-arc = ARC Spécifiez le centre de l'arc :
.arc-specify-included-angle = ARC Spécifiez l'angle inscrit :
.arc-specify-length-of-chord = ARC Spécifiez la longueur de la corde :
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Spécifiez la direction tangente au point de départ de l'arc :
.arc-specify-radius-of-arc = ARC Spécifiez le rayon de l'arc :
.chord-length = Longueur de corde
modify =
.add-vertex = Ajouter un sommet
@@ -5309,6 +5318,10 @@ ui =
.deselect-all = Tout désélectionner
.options-ellipsis = Options...
.base-point = Point de base
.snap-overrides = Remplacements d'accrochage
.mid-between-2-points = Milieu entre 2 points
.osnap-settings = Paramètres d'accrochage...
.snap-override-none-next-pick-only = Remplacement d'accrochage : Aucun (prochain point seulement).
dimstyle =
.keep-text-between-extension-lines = Toujours conserver le texte entre les lignes d’attache
+13
View File
@@ -2841,6 +2841,15 @@ draw =
.center-keyword = केंद्र
.close-keyword = बंद करें
.second-pt = दूसरा बिंदु
.arc-specify-start-point-of-arc = ARC चाप का प्रारंभिक बिंदु निर्दिष्ट करें:
.arc-specify-second-point-of-arc = ARC चाप का दूसरा बिंदु निर्दिष्ट करें:
.arc-specify-end-point-of-arc = ARC चाप का अंतिम बिंदु निर्दिष्ट करें:
.arc-specify-center-point-of-arc = ARC चाप का केंद्र बिंदु निर्दिष्ट करें:
.arc-specify-included-angle = ARC अंतर्निहित कोण निर्दिष्ट करें:
.arc-specify-length-of-chord = ARC जीवा की लंबाई निर्दिष्ट करें:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC चाप के प्रारंभिक बिंदु पर स्पर्शरेखा की दिशा निर्दिष्ट करें:
.arc-specify-radius-of-arc = ARC चाप की त्रिज्या निर्दिष्ट करें:
.chord-length = जीवा की लंबाई
modify =
.add-vertex = शीर्ष जोड़ें
@@ -5298,6 +5307,10 @@ ui =
.deselect-all = सभी का चयन हटाएँ
.options-ellipsis = विकल्प...
.base-point = आधार बिंदु
.snap-overrides = स्नैप ओवरराइड
.mid-between-2-points = 2 बिंदुओं के बीच मध्य
.osnap-settings = ऑब्जेक्ट स्नैप सेटिंग्स...
.snap-override-none-next-pick-only = स्नैप ओवरराइड: कोई नहीं (केवल अगले चयन के लिए)।
dimstyle =
.keep-text-between-extension-lines = पाठ को हमेशा विस्तार रेखाओं के बीच रखें
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = Középpont
.close-keyword = Zárás
.second-pt = Második pont
.arc-specify-start-point-of-arc = ARC Adja meg az ív kezdőpontját:
.arc-specify-second-point-of-arc = ARC Adja meg az ív második pontját:
.arc-specify-end-point-of-arc = ARC Adja meg az ív végpontját:
.arc-specify-center-point-of-arc = ARC Adja meg az ív középpontját:
.arc-specify-included-angle = ARC Adja meg a középponti szöget:
.arc-specify-length-of-chord = ARC Adja meg a húr hosszát:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Adja meg az érintő irányát az ív kezdőpontjában:
.arc-specify-radius-of-arc = ARC Adja meg az ív sugarát:
.chord-length = Húrhossz
modify =
.add-vertex = Csúcspont hozzáadása
@@ -5309,6 +5318,10 @@ ui =
.deselect-all = Kijelölés megszüntetése
.options-ellipsis = Beállítások...
.base-point = Bázispont
.snap-overrides = Ideiglenes tárgyraszter
.mid-between-2-points = 2 pont közötti felezőpont
.osnap-settings = Tárgyraszter beállítások...
.snap-override-none-next-pick-only = Ideiglenes tárgyraszter: Nincs (csak a következő pontra).
dimstyle =
.keep-text-between-extension-lines = Mindig legyen szöveg a hosszabbító sorok között
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = Centro
.close-keyword = Chiudi
.second-pt = Secondo punto
.arc-specify-start-point-of-arc = ARC Specificare punto iniziale dell'arco:
.arc-specify-second-point-of-arc = ARC Specificare secondo punto dell'arco:
.arc-specify-end-point-of-arc = ARC Specificare punto finale dell'arco:
.arc-specify-center-point-of-arc = ARC Specificare centro dell'arco:
.arc-specify-included-angle = ARC Specificare angolo inscritto:
.arc-specify-length-of-chord = ARC Specificare lunghezza della corda:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Specificare direzione tangente nel punto iniziale dell'arco:
.arc-specify-radius-of-arc = ARC Specificare raggio dell'arco:
.chord-length = Lunghezza corda
modify =
.add-vertex = Aggiungi vertice
@@ -5309,6 +5318,10 @@ ui =
.deselect-all = Deseleziona tutto
.options-ellipsis = Opzioni...
.base-point = Punto base
.snap-overrides = Snap temporanei
.mid-between-2-points = Punto medio tra 2 punti
.osnap-settings = Impostazioni snap...
.snap-override-none-next-pick-only = Snap temporaneo: Nessuno (solo il prossimo punto).
dimstyle =
.keep-text-between-extension-lines = Mantieni sempre il testo tra le linee di estensione
+13
View File
@@ -2843,6 +2843,15 @@ draw =
.center-keyword = 中心
.close-keyword = 閉じる
.second-pt = 2 点目
.arc-specify-start-point-of-arc = ARC 円弧の始点を指定:
.arc-specify-second-point-of-arc = ARC 円弧の 2 点目を指定:
.arc-specify-end-point-of-arc = ARC 円弧の終点を指定:
.arc-specify-center-point-of-arc = ARC 円弧の中心を指定:
.arc-specify-included-angle = ARC 中心角を指定:
.arc-specify-length-of-chord = ARC 弦の長さを指定:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC 円弧の始点での接線方向を指定:
.arc-specify-radius-of-arc = ARC 円弧の半径を指定:
.chord-length = 弦の長さ
modify =
.add-vertex = 頂点を追加
@@ -5298,6 +5307,10 @@ ui =
.deselect-all = 選択解除
.options-ellipsis = オプション...
.base-point = 基点
.snap-overrides = 優先オブジェクトスナップ
.mid-between-2-points = 2 点間の中点
.osnap-settings = オブジェクトスナップ設定...
.snap-override-none-next-pick-only = 優先スナップ: なし (次の点のみ)。
dimstyle =
.keep-text-between-extension-lines = 寸法値を常に寸法補助線の間に配置
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = 중심
.close-keyword = 닫기
.second-pt = 두 번째 점
.arc-specify-start-point-of-arc = ARC 호의 시작점 지정:
.arc-specify-second-point-of-arc = ARC 호의 두 번째 점 지정:
.arc-specify-end-point-of-arc = ARC 호의 끝점 지정:
.arc-specify-center-point-of-arc = ARC 호의 중심점 지정:
.arc-specify-included-angle = ARC 사이각 지정:
.arc-specify-length-of-chord = ARC 현의 길이 지정:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC 호 시작점의 접선 방향 지정:
.arc-specify-radius-of-arc = ARC 호의 반지름 지정:
.chord-length = 현 길이
modify =
.add-vertex = 정점 추가
@@ -5309,6 +5318,10 @@ ui =
.deselect-all = 선택 해제
.options-ellipsis = 옵션...
.base-point = 기준점
.snap-overrides = 스냅 재지정
.mid-between-2-points = 두 점 사이의 중간
.osnap-settings = 객체 스냅 설정...
.snap-override-none-next-pick-only = 스냅 재지정: 없음 (다음 선택만).
dimstyle =
.keep-text-between-extension-lines = 보조선 사이에 항상 텍스트 유지
+13
View File
@@ -2853,6 +2853,15 @@ draw =
.center-keyword = Centrum
.close-keyword = Sluiten
.second-pt = Tweede punt
.arc-specify-start-point-of-arc = ARC Geef beginpunt van boog op:
.arc-specify-second-point-of-arc = ARC Geef tweede punt van boog op:
.arc-specify-end-point-of-arc = ARC Geef eindpunt van boog op:
.arc-specify-center-point-of-arc = ARC Geef middelpunt van boog op:
.arc-specify-included-angle = ARC Geef ingesloten hoek op:
.arc-specify-length-of-chord = ARC Geef lengte van koorde op:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Geef raaklijnrichting in beginpunt van boog op:
.arc-specify-radius-of-arc = ARC Geef straal van boog op:
.chord-length = Koordelengte
modify =
.add-vertex = Hoekpunt toevoegen
@@ -5308,6 +5317,10 @@ ui =
.deselect-all = Alles deselecteren
.options-ellipsis = Opties...
.base-point = Basispunt
.snap-overrides = Tijdelijke snaps
.mid-between-2-points = Midden tussen 2 punten
.osnap-settings = Objectsnap-instellingen...
.snap-override-none-next-pick-only = Tijdelijke snap: Geen (alleen volgend punt).
dimstyle =
.keep-text-between-extension-lines = Tekst altijd tussen hulplijnen houden
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = Środek
.close-keyword = Zamknij
.second-pt = Drugi punkt
.arc-specify-start-point-of-arc = ARC Określ punkt początkowy łuku:
.arc-specify-second-point-of-arc = ARC Określ drugi punkt łuku:
.arc-specify-end-point-of-arc = ARC Określ punkt końcowy łuku:
.arc-specify-center-point-of-arc = ARC Określ środek łuku:
.arc-specify-included-angle = ARC Określ kąt rozwarcia:
.arc-specify-length-of-chord = ARC Określ długość cięciwy:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Określ kierunek stycznej w punkcie początkowym łuku:
.arc-specify-radius-of-arc = ARC Określ promień łuku:
.chord-length = Długość cięciwy
modify =
.add-vertex = Dodaj wierzchołek
@@ -5309,6 +5318,10 @@ ui =
.deselect-all = Odznacz wszystko
.options-ellipsis = Opcje...
.base-point = Punkt bazowy
.snap-overrides = Tymczasowe lokalizacje
.mid-between-2-points = Środek między 2 punktami
.osnap-settings = Ustawienia lokalizacji...
.snap-override-none-next-pick-only = Tymczasowa lokalizacja: Brak (tylko następny punkt).
dimstyle =
.keep-text-between-extension-lines = Zawsze przechowuj tekst pomiędzy liniami pomocniczymi
+13
View File
@@ -2853,6 +2853,15 @@ draw =
.center-keyword = Centro
.close-keyword = Fechar
.second-pt = Segundo ponto
.arc-specify-start-point-of-arc = ARC Especifique o ponto inicial do arco:
.arc-specify-second-point-of-arc = ARC Especifique o segundo ponto do arco:
.arc-specify-end-point-of-arc = ARC Especifique o ponto final do arco:
.arc-specify-center-point-of-arc = ARC Especifique o centro do arco:
.arc-specify-included-angle = ARC Especifique o ângulo incluído:
.arc-specify-length-of-chord = ARC Especifique o comprimento da corda:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Especifique a direção tangente no ponto inicial do arco:
.arc-specify-radius-of-arc = ARC Especifique o raio do arco:
.chord-length = Comprimento da corda
modify =
.add-vertex = Adicionar vértice
@@ -5310,6 +5319,10 @@ ui =
.deselect-all = Desmarcar tudo
.options-ellipsis = Opções...
.base-point = Ponto base
.snap-overrides = Substituições de snap
.mid-between-2-points = Meio entre 2 pontos
.osnap-settings = Configurações de snap...
.snap-override-none-next-pick-only = Substituição de snap: Nenhum (somente o próximo ponto).
dimstyle =
.keep-text-between-extension-lines = Sempre manter o texto entre as linhas de extensão
+13
View File
@@ -2856,6 +2856,15 @@ draw =
.center-keyword = Центр
.close-keyword = Замкнуть
.second-pt = Вторая точка
.arc-specify-start-point-of-arc = ARC Укажите начальную точку дуги:
.arc-specify-second-point-of-arc = ARC Укажите вторую точку дуги:
.arc-specify-end-point-of-arc = ARC Укажите конечную точку дуги:
.arc-specify-center-point-of-arc = ARC Укажите центр дуги:
.arc-specify-included-angle = ARC Укажите центральный угол:
.arc-specify-length-of-chord = ARC Укажите длину хорды:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Укажите направление касательной в начальной точке дуги:
.arc-specify-radius-of-arc = ARC Укажите радиус дуги:
.chord-length = Длина хорды
modify =
.add-vertex = Добавить вершину
@@ -5311,6 +5320,10 @@ ui =
.deselect-all = Снять выделение
.options-ellipsis = Параметры...
.base-point = Базовая точка
.snap-overrides = Разовые привязки
.mid-between-2-points = Середина между 2 точками
.osnap-settings = Настройки привязки...
.snap-override-none-next-pick-only = Разовая привязка: Нет (только следующая точка).
dimstyle =
.keep-text-between-extension-lines = Всегда размещать текст между выносными линиями
+13
View File
@@ -2835,6 +2835,15 @@ draw =
.center-keyword = Merkez
.close-keyword = Kapat
.second-pt = İkinci nokta
.arc-specify-start-point-of-arc = ARC Yayın başlangıç noktasını belirtin:
.arc-specify-second-point-of-arc = ARC Yayın ikinci noktasını belirtin:
.arc-specify-end-point-of-arc = ARC Yayın bitiş noktasını belirtin:
.arc-specify-center-point-of-arc = ARC Yayın merkez noktasını belirtin:
.arc-specify-included-angle = ARC İç açıyı belirtin:
.arc-specify-length-of-chord = ARC Kiriş uzunluğunu belirtin:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC Yayın başlangıç noktasındaki teğet yönünü belirtin:
.arc-specify-radius-of-arc = ARC Yayın yarıçapını belirtin:
.chord-length = Kiriş uzunluğu
modify =
.count-objects = (__ocs_arg_count__ nesne)
@@ -5233,6 +5242,10 @@ ui =
.deselect-all = Seçimi kaldır
.options-ellipsis = Seçenekler...
.base-point = Taban noktası
.snap-overrides = Geçici kenetlemeler
.mid-between-2-points = 2 nokta arası orta
.osnap-settings = Nesne kenetleme ayarları...
.snap-override-none-next-pick-only = Geçici kenetleme: Yok (yalnızca sonraki nokta).
dimstyle =
.keep-text-between-extension-lines = Metni her zaman uzatma çizgileri arasında tut
+13
View File
@@ -2840,6 +2840,15 @@ draw =
.center-keyword = 圆心
.close-keyword = 闭合
.second-pt = 第二点
.arc-specify-start-point-of-arc = ARC 指定圆弧的起点:
.arc-specify-second-point-of-arc = ARC 指定圆弧的第二点:
.arc-specify-end-point-of-arc = ARC 指定圆弧的端点:
.arc-specify-center-point-of-arc = ARC 指定圆弧的圆心:
.arc-specify-included-angle = ARC 指定夹角:
.arc-specify-length-of-chord = ARC 指定弦长:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC 指定圆弧起点的切线方向:
.arc-specify-radius-of-arc = ARC 指定圆弧的半径:
.chord-length = 弦长
modify =
.add-vertex = 添加顶点
@@ -5293,6 +5302,10 @@ ui =
.deselect-all = 全部取消选择
.options-ellipsis = 选项...
.base-point = 基点
.snap-overrides = 捕捉替代
.mid-between-2-points = 两点之间的中点
.osnap-settings = 对象捕捉设置...
.snap-override-none-next-pick-only = 捕捉替代:无(仅下一次拾取)。
dimstyle =
.keep-text-between-extension-lines = 始终将文字置于尺寸界线之间
+13
View File
@@ -2852,6 +2852,15 @@ draw =
.center-keyword = 圓心
.close-keyword = 閉合
.second-pt = 第二點
.arc-specify-start-point-of-arc = ARC 指定弧的起點:
.arc-specify-second-point-of-arc = ARC 指定弧的第二點:
.arc-specify-end-point-of-arc = ARC 指定弧的端點:
.arc-specify-center-point-of-arc = ARC 指定弧的圓心:
.arc-specify-included-angle = ARC 指定夾角:
.arc-specify-length-of-chord = ARC 指定弦長:
.arc-specify-tangent-direction-for-the-start-point-of-arc = ARC 指定弧起點的切線方向:
.arc-specify-radius-of-arc = ARC 指定弧的半徑:
.chord-length = 弦長
modify =
.add-vertex = 新增頂點
@@ -5305,6 +5314,10 @@ ui =
.deselect-all = 全部取消選取
.options-ellipsis = 選項...
.base-point = 基準點
.snap-overrides = 鎖點取代
.mid-between-2-points = 兩點之間的中點
.osnap-settings = 物件鎖點設定...
.snap-override-none-next-pick-only = 鎖點取代:無(僅下一次點選)。
dimstyle =
.keep-text-between-extension-lines = 始終將文字置於尺寸界線之間