forked from 1b-agent/opencadstudio-upstream
web: autosave snapshots with crash-recovery restore, persistent storage
The web build had no autosave: on_autosave was a no-op and the subscription was native-only. Both gates are gone; every savetime tick now serializes each dirty tab (same pre-serialize sync as the web save path, no thumbnail, serialized serially off the critical paint path) into a dedicated opencadstudio-autosave OPFS directory, keyed by drawing name, without touching the dirty flag, downloads, or recents. On boot the web app scans that directory and offers any snapshot newer than the last saved copy in a localized Recover Drawing modal (Restore opens it as "name (recovered).dwg" through the standard open pipeline; Discard removes it; Escape discards). Saving or closing a drawing clears its snapshot; the boot scan also garbage- collects stale entries. run_web now requests navigator.storage.persist so settings and OPFS data survive browser eviction.
This commit is contained in:
1 parent
ad60be11ed
commit
101d167ebc
31 files changed
+746
-11
No files matched your search
@@ -273,6 +273,12 @@ command-copy =
|
||||
} | مصفوفة | Enter=إنهاء | الأساس { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = استرداد الرسم
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = استعده كعلامة تبويب مستردة أو تجاهل النسخة.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = لدى "__ocs_fmt_0__" نسخة حفظ تلقائي أحدث من آخر حفظ.
|
||||
.autosave-copy-could-not-be-stored = تعذر تخزين نسخة الحفظ التلقائي: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = تم استرداد "__ocs_fmt_0__" من نسخة الحفظ التلقائي
|
||||
.autosave-copy-could-not-be-read = تعذر قراءة نسخة الحفظ التلقائي: __ocs_fmt_0__
|
||||
.jogged-radius = نصف قطر منكسر
|
||||
.none-use-shortcuts-set-key-command = (لا شيء — استخدم: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = المحاذاة:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
*[other] { $count } копия досега
|
||||
} | Масив | Enter=готово | база { $x },{ $y }]:
|
||||
common =
|
||||
.recover-drawing = Възстановяване на чертеж
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Възстановете го като възстановен раздел или отхвърлете копието.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" има копие от автоматично записване, по-ново от последния запис.
|
||||
.autosave-copy-could-not-be-stored = Копието от автоматичното записване не можа да бъде съхранено: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" беше възстановен от копието от автоматичното записване
|
||||
.autosave-copy-could-not-be-read = Копието от автоматичното записване не можа да бъде прочетено: __ocs_fmt_0__
|
||||
.jogged-radius = Радиус с чупка
|
||||
.none-use-shortcuts-set-key-command = (няма — използвай: SHORTCUTS SET <клавиш> <команда>)
|
||||
.alignment-indented-label-title-case = Подравняване:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | Pole | Enter=hotovo | základna { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Obnovit výkres
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Obnovte jej jako obnovenou kartu nebo kopii zahoďte.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" má kopii automatického uložení novější než poslední uložení.
|
||||
.autosave-copy-could-not-be-stored = Kopii automatického uložení nelze uložit: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" byl obnoven z kopie automatického uložení
|
||||
.autosave-copy-could-not-be-read = Kopii automatického uložení nelze přečíst: __ocs_fmt_0__
|
||||
.jogged-radius = Zalomený poloměr
|
||||
.none-use-shortcuts-set-key-command =(žádné — použijte: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Zarovnání:
|
||||
|
||||
@@ -261,6 +261,12 @@ command-copy =
|
||||
} | Array | Eingabe=fertig | Basis { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Zeichnung wiederherstellen
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Als wiederhergestellte Registerkarte öffnen oder die Kopie verwerfen.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = Für „__ocs_fmt_0__“ existiert eine automatische Sicherungskopie, die neuer ist als die letzte gespeicherte Version.
|
||||
.autosave-copy-could-not-be-stored = Automatische Sicherungskopie konnte nicht gespeichert werden: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = „__ocs_fmt_0__“ wurde aus der automatischen Sicherungskopie wiederhergestellt
|
||||
.autosave-copy-could-not-be-read = Automatische Sicherungskopie konnte nicht gelesen werden: __ocs_fmt_0__
|
||||
.jogged-radius = Geknickter Radius
|
||||
.none-use-shortcuts-set-key-command = (keine — verwenden: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Ausrichtung:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | Διάταξη | Enter=τέλος | βάση { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Ανάκτηση σχεδίου
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Επαναφέρετέ το ως ανακτημένη καρτέλα ή απορρίψτε το αντίγραφο.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = Το "__ocs_fmt_0__" έχει αντίγραφο αυτόματης αποθήκευσης νεότερο της τελευταίας αποθήκευσης.
|
||||
.autosave-copy-could-not-be-stored = Δεν ήταν δυνατή η αποθήκευση του αντιγράφου αυτόματης αποθήκευσης: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = Το "__ocs_fmt_0__" επαναφέρθηκε από το αντίγραφο αυτόματης αποθήκευσης
|
||||
.autosave-copy-could-not-be-read = Δεν ήταν δυνατή η ανάγνωση του αντιγράφου αυτόματης αποθήκευσης: __ocs_fmt_0__
|
||||
.revolve-created-objects-failed-sources = REVOLVE: δημιουργήθηκαν __ocs_arg_created__ αντικείμενα· __ocs_arg_failed__ αρχικά αντικείμενα δεν μπόρεσαν να περιστραφούν.
|
||||
.revolve-no-selected-object-could-be-revolved = REVOLVE: κανένα επιλεγμένο αντικείμενο δεν μπόρεσε να περιστραφεί με τις ζητούμενες επιλογές.
|
||||
.none-use-shortcuts-set-key-command = (κανένα — χρησιμοποιήστε: SHORTCUTS SET <πλήκτρο> <εντολή>)
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | Array | Enter=done | base { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Recover Drawing
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Restore it as a recovered tab, or discard the copy.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" has an autosave copy newer than the last save.
|
||||
.autosave-copy-could-not-be-stored = Autosave copy could not be stored: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = Restored "__ocs_fmt_0__" from the autosave copy
|
||||
.autosave-copy-could-not-be-read = Autosave copy could not be read: __ocs_fmt_0__
|
||||
.none-use-shortcuts-set-key-command = (none — use: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Alignment:
|
||||
.background-fill-enabled = Background fill enabled
|
||||
|
||||
@@ -261,6 +261,12 @@ command-copy =
|
||||
} | Matriz | Enter=terminar | base { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Recuperar dibujo
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Restáurelo como una pestaña recuperada o descarte la copia.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" tiene una copia de autoguardado más reciente que la última copia guardada.
|
||||
.autosave-copy-could-not-be-stored = No se pudo guardar la copia de autoguardado: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" restaurado desde la copia de autoguardado
|
||||
.autosave-copy-could-not-be-read = No se pudo leer la copia de autoguardado: __ocs_fmt_0__
|
||||
.jogged-radius = Radio con recodo
|
||||
.none-use-shortcuts-set-key-command = (ninguno — use: SHORTCUTS SET <tecla> <comando>)
|
||||
.alignment-indented-label-title-case = Alineación:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | taulukko | Enter=valmis | pohja { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Palauta piirustus
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Palauta se palautettuna välilehtenä tai hylkää kopio.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = Kohteella "__ocs_fmt_0__" on automaattisen tallennuksen kopio, joka on uudempi kuin viimeisin tallennus.
|
||||
.autosave-copy-could-not-be-stored = Automaattisen tallennuksen kopiota ei voitu tallentaa: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" palautettiin automaattisen tallennuksen kopiosta
|
||||
.autosave-copy-could-not-be-read = Automaattisen tallennuksen kopiota ei voitu lukea: __ocs_fmt_0__
|
||||
.jogged-radius = Katkaistu säde
|
||||
.none-use-shortcuts-set-key-command =(ei mitään — käytä: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Tasaus:
|
||||
|
||||
@@ -261,6 +261,12 @@ command-copy =
|
||||
} | Réseau | Entrée=terminer | base { $x },{ $y }] :
|
||||
|
||||
common =
|
||||
.recover-drawing = Récupérer le dessin
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Restaurez-le dans un onglet récupéré ou supprimez la copie.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = «__ocs_fmt_0__» dispose d’une copie de sauvegarde automatique plus récente que le dernier enregistrement.
|
||||
.autosave-copy-could-not-be-stored = Impossible de stocker la copie de sauvegarde automatique : __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = «__ocs_fmt_0__» restauré depuis la copie de sauvegarde automatique
|
||||
.autosave-copy-could-not-be-read = Impossible de lire la copie de sauvegarde automatique : __ocs_fmt_0__
|
||||
.jogged-radius = Rayon raccourci
|
||||
.none-use-shortcuts-set-key-command = (aucune utilisation: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Alignement :
|
||||
|
||||
@@ -249,6 +249,12 @@ command-copy =
|
||||
.target = COPY गंतव्य निर्दिष्ट करें [अब तक { $count } प्रतियाँ | ऐरे | Enter=पूर्ण | आधार { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = चित्र पुनर्प्राप्त करें
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = इसे पुनर्प्राप्त टैब के रूप में पुनर्स्थापित करें, या प्रतिलिपि त्याग दें।
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" के पास अंतिम सहेजने से नई ऑटोसेव प्रतिलिपि है।
|
||||
.autosave-copy-could-not-be-stored = ऑटोसेव प्रतिलिपि संग्रहित नहीं की जा सकी: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" को ऑटोसेव प्रतिलिपि से पुनर्स्थापित किया गया
|
||||
.autosave-copy-could-not-be-read = ऑटोसेव प्रतिलिपि पढ़ी नहीं जा सकी: __ocs_fmt_0__
|
||||
.jogged-radius = मोड़ वाला त्रिज्या माप
|
||||
.none-use-shortcuts-set-key-command = (कोई नहीं — उपयोग: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = संरेखण:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | tömb | Enter=kész | alap { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Rajz helyreállítása
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Állítsa helyre egy helyreállított lapon, vagy vesse el a másolatot.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = A(z) "__ocs_fmt_0__" újabb automatikus mentési másolattal rendelkezik, mint az utolsó mentés.
|
||||
.autosave-copy-could-not-be-stored = Az automatikus mentési másolatot nem sikerült tárolni: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = A(z) "__ocs_fmt_0__" helyreállítva az automatikus mentési másolatból
|
||||
.autosave-copy-could-not-be-read = Az automatikus mentési másolatot nem sikerült elolvasni: __ocs_fmt_0__
|
||||
.jogged-radius = Tört sugarú méret
|
||||
.none-use-shortcuts-set-key-command =(nincs – használat: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Igazítás:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | Serie | Enter=completato | base { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Recupera disegno
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Ripristinalo in una scheda recuperata oppure elimina la copia.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" ha una copia di salvataggio automatico più recente dell’ultimo salvataggio.
|
||||
.autosave-copy-could-not-be-stored = Impossibile salvare la copia di salvataggio automatico: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" ripristinato dalla copia di salvataggio automatico
|
||||
.autosave-copy-could-not-be-read = Impossibile leggere la copia di salvataggio automatico: __ocs_fmt_0__
|
||||
.jogged-radius = Raggio spezzato
|
||||
.none-use-shortcuts-set-key-command =(nessuno — utilizzare: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Allineamento:
|
||||
|
||||
@@ -251,6 +251,12 @@ command-copy =
|
||||
.target = COPY 移動先を指定 [これまでに { $count } 個複写 | 配列 | Enter=完了 | 基点 { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = 図面の復元
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = 復元タブとして開くか、コピーを破棄してください。
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" には最終保存より新しい自動保存コピーがあります。
|
||||
.autosave-copy-could-not-be-stored = 自動保存コピーを保存できませんでした: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" を自動保存コピーから復元しました
|
||||
.autosave-copy-could-not-be-read = 自動保存コピーを読み込めませんでした: __ocs_fmt_0__
|
||||
.jogged-radius = 折れ曲がり半径
|
||||
.none-use-shortcuts-set-key-command = (なし — SHORTCUTS SET <key> <command> を使用)
|
||||
.alignment-indented-label-title-case = 配置:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | 배열 | Enter=완료 | 베이스 { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = 도면 복구
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = 복구된 탭으로 열거나 사본을 삭제하세요.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__"에 마지막 저장보다 새로운 자동 저장 사본이 있습니다.
|
||||
.autosave-copy-could-not-be-stored = 자동 저장 사본을 저장할 수 없습니다: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__"을(를) 자동 저장 사본에서 복원했습니다
|
||||
.autosave-copy-could-not-be-read = 자동 저장 사본을 읽을 수 없습니다: __ocs_fmt_0__
|
||||
.jogged-radius = 꺾인 반지름
|
||||
.none-use-shortcuts-set-key-command = (없음 — 사용: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case =정렬:
|
||||
|
||||
@@ -261,6 +261,12 @@ command-copy =
|
||||
} | Reeks | Enter=gereed | basis { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Tekening herstellen
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Herstel het als een hersteld tabblad of verwijder de kopie.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" heeft een automatisch opgeslagen kopie die nieuwer is dan de laatste opslag.
|
||||
.autosave-copy-could-not-be-stored = Automatische opslagkopie kon niet worden bewaard: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" is hersteld uit de automatische opslagkopie
|
||||
.autosave-copy-could-not-be-read = Automatische opslagkopie kon niet worden gelezen: __ocs_fmt_0__
|
||||
.jogged-radius = Geknikte straal
|
||||
.none-use-shortcuts-set-key-command = (geen gebruik: SHORTCUTS SET <toets> <opdracht>)
|
||||
.alignment-indented-label-title-case = Uitlijning:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | Tablica | Enter=gotowe | baza { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Odzyskaj rysunek
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Przywróć go jako odzyskaną kartę lub odrzuć kopię.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" ma kopię autozapisu nowszą niż ostatni zapis.
|
||||
.autosave-copy-could-not-be-stored = Nie można zapisać kopii autozapisu: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = Przywrócono "__ocs_fmt_0__" z kopii autozapisu
|
||||
.autosave-copy-could-not-be-read = Nie można odczytać kopii autozapisu: __ocs_fmt_0__
|
||||
.jogged-radius = Promień łamany
|
||||
.none-use-shortcuts-set-key-command =(brak — użyj: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Wyrównanie:
|
||||
|
||||
@@ -261,6 +261,12 @@ command-copy =
|
||||
} | Matriz | Enter=concluir | base { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Recuperar desenho
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Restaure-o como uma guia recuperada ou descarte a cópia.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" tem uma cópia de salvamento automático mais recente que o último salvamento.
|
||||
.autosave-copy-could-not-be-stored = Não foi possível armazenar a cópia de salvamento automático: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" restaurado da cópia de salvamento automático
|
||||
.autosave-copy-could-not-be-read = Não foi possível ler a cópia de salvamento automático: __ocs_fmt_0__
|
||||
.jogged-radius = Raio com desvio
|
||||
.none-use-shortcuts-set-key-command = (nenhum — use: SHORTCUTS SET <tecla> <comando>)
|
||||
.alignment-indented-label-title-case = Alinhamento:
|
||||
|
||||
@@ -264,6 +264,12 @@ command-copy =
|
||||
} | Массив | Enter=готово | база { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Восстановление чертежа
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Восстановите его на отдельной вкладке или удалите копию.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = У «__ocs_fmt_0__» есть копия автосохранения новее последнего сохранения.
|
||||
.autosave-copy-could-not-be-stored = Не удалось сохранить копию автосохранения: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = «__ocs_fmt_0__» восстановлен из копии автосохранения
|
||||
.autosave-copy-could-not-be-read = Не удалось прочитать копию автосохранения: __ocs_fmt_0__
|
||||
.jogged-radius = Радиус с изломом
|
||||
.none-use-shortcuts-set-key-command = (нет — используйте: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Выравнивание:
|
||||
|
||||
@@ -246,6 +246,12 @@ command-copy =
|
||||
.target = COPY Hedef noktayı belirtin [şimdiye kadar { $count } kopya | Dizi | Enter=tamam | temel { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = Çizimi Kurtar
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = Onu kurtarılan bir sekme olarak geri yükleyin veya kopyayı atın.
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" son kayıttan daha yeni bir otomatik kayıt kopyasına sahip.
|
||||
.autosave-copy-could-not-be-stored = Otomatik kayıt kopyası depolanamadı: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = "__ocs_fmt_0__" otomatik kayıt kopyasından geri yüklendi
|
||||
.autosave-copy-could-not-be-read = Otomatik kayıt kopyası okunamadı: __ocs_fmt_0__
|
||||
.none-use-shortcuts-set-key-command = (none – use: SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = Adapt:
|
||||
.background-fill-enabled = Arka plan doldurma etkinleştir etkinleştirildi
|
||||
|
||||
@@ -248,6 +248,12 @@ command-copy =
|
||||
.target = COPY 指定目标点 [已复制 { $count } 个 | 阵列 | 回车=完成 | 基点 { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = 恢复图形
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = 将其恢复为已恢复的标签页,或放弃该副本。
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" 有一份比上次保存更新的自动保存副本。
|
||||
.autosave-copy-could-not-be-stored = 无法存储自动保存副本: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = 已从自动保存副本恢复 "__ocs_fmt_0__"
|
||||
.autosave-copy-could-not-be-read = 无法读取自动保存副本: __ocs_fmt_0__
|
||||
.jogged-radius = 折弯半径
|
||||
.none-use-shortcuts-set-key-command = (无 — 使用:SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = 对齐:
|
||||
|
||||
@@ -260,6 +260,12 @@ command-copy =
|
||||
} | 陣列 | Enter=完成 | 基準點 { $x },{ $y }]:
|
||||
|
||||
common =
|
||||
.recover-drawing = 恢復圖面
|
||||
.restore-it-as-a-recovered-tab-or-discard-the-copy = 將其恢復為已恢復的分頁,或捨棄該副本。
|
||||
.name-has-an-autosave-copy-newer-than-the-last-save = "__ocs_fmt_0__" 有一份比上次儲存更新的自動儲存副本。
|
||||
.autosave-copy-could-not-be-stored = 無法儲存自動儲存副本: __ocs_fmt_0__
|
||||
.restored-from-the-autosave-copy = 已從自動儲存副本恢復 "__ocs_fmt_0__"
|
||||
.autosave-copy-could-not-be-read = 無法讀取自動儲存副本: __ocs_fmt_0__
|
||||
.jogged-radius = 折彎半徑
|
||||
.none-use-shortcuts-set-key-command = (無 — 使用:SHORTCUTS SET <key> <command>)
|
||||
.alignment-indented-label-title-case = 對齊:
|
||||
|
||||
Reference in new issue
Block a user