chore(i18n): sync locale catalog and translations with source strings

Remove the dead catalog entry for the deleted XREF dead-end text and add the 389 source strings missing from the catalog (data extraction, drafting settings, panels, commands). Every locale gets the English text as placeholder under common/insert following existing practice. scripts/test_locales.py passes (5077 lookups).

locales/ar-SA/opencadstudio.ftl

@@ -1880,6 +1880,391 @@ common =
     .dimensional = بُعدي
     .show-hide = إظهار/إخفاء
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = تحذير الحفظ
     .unable-to-save-drawing = تعذر حفظ الرسم
@@ -3325,6 +3710,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = إنشاء
     .boolean = عمليات منطقية

locales/bg-BG/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Размерни
     .show-hide = Показване/скриване
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Предупреждение при запазване
     .unable-to-save-drawing = Чертежът не може да бъде запазен
@@ -3312,6 +3697,11 @@ insert =
 
     .path = Път:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Създаване
     .boolean = Булеви операции

locales/cs-CZ/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Rozměrové
     .show-hide = Zobrazit/skrýt
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Uložit varování
     .unable-to-save-drawing = Nákres nelze uložit
@@ -3310,6 +3695,11 @@ insert =
 
     .path = Cesta:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Vytvořit
     .boolean = Booleovské operace

locales/de-DE/opencadstudio.ftl

@@ -1868,6 +1868,391 @@ common =
     .dimensional = Bemaßung
     .show-hide = Anzeigen/Ausblenden
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Warnhinweise speichern
     .unable-to-save-drawing = Zeichnung konnte nicht gespeichert werden
@@ -3311,6 +3696,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Erstellen
     .boolean = Boolesche Operationen

locales/el-GR/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Διαστατικοί
     .show-hide = Εμφάνιση/Απόκρυψη
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Προειδοποίηση αποθήκευσης
     .unable-to-save-drawing = Αδυναμία αποθήκευσης σχεδίου
@@ -3313,6 +3698,11 @@ insert =
     .select-at-least-one-guide-curve = { draw.select }: { common.guides } (≥1).
     .specify-the-requested-path-or-point-or-use-undo = { common.specify }: { common.path } / { common.point } [{ common.undo }].
 
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Δημιουργία
     .boolean = Δυαδική πράξη

locales/en-US/opencadstudio.ftl

@@ -1868,6 +1868,391 @@ common =
     .dimensional = Dimensional
     .show-hide = Show/Hide
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Save Warning
     .unable-to-save-drawing = Unable to Save Drawing
@@ -3314,6 +3699,11 @@ insert =
     .select-at-least-one-guide-curve = Select at least one guide curve.
     .specify-the-requested-path-or-point-or-use-undo = Specify the requested path or point, or use Undo.
 
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Create
     .boolean = Boolean

locales/es-ES/opencadstudio.ftl

@@ -1868,6 +1868,391 @@ common =
     .dimensional = Dimensionales
     .show-hide = Mostrar/Ocultar
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Advertencia de guardado
     .unable-to-save-drawing = No se puede guardar el dibujo
@@ -3313,6 +3698,11 @@ insert =
 
     .path = Ruta:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Crear
     .boolean = Booleanas

locales/fi-FI/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Mitalliset
     .show-hide = Näytä/Piilota
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Tallenna varoitus
     .unable-to-save-drawing = Piirustusta ei voi tallentaa
@@ -3312,6 +3697,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Luo
     .boolean = Boolen operaatiot

locales/fr-FR/opencadstudio.ftl

@@ -1868,6 +1868,391 @@ common =
     .dimensional = Dimensionnelles
     .show-hide = Afficher/Masquer
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Enregistrer l' avertissement
     .unable-to-save-drawing = Impossible de sauvegarder le dessin
@@ -3313,6 +3698,11 @@ insert =
 
        .path = Chemin :
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Créer
     .boolean = Opérations booléennes

locales/hi-IN/opencadstudio.ftl

@@ -1856,6 +1856,391 @@ common =
     .dimensional = आयामी
     .show-hide = दिखाएँ/छिपाएँ
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = चेतावनी सहेजें
     .unable-to-save-drawing = ड्रॉइंग सहेजी नहीं जा सकी
@@ -3301,6 +3686,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = बनाएँ
     .boolean = बूलियन संक्रियाएँ

locales/hu-HU/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Méretkényszerek
     .show-hide = Megjelenítés/Elrejtés
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Figyelmeztetés mentése
     .unable-to-save-drawing = Nem sikerült menteni a rajzot
@@ -3312,6 +3697,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Létrehozás
     .boolean = Logikai műveletek

locales/it-IT/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Dimensionali
     .show-hide = Mostra/Nascondi
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Salva avviso
     .unable-to-save-drawing = Impossibile salvare il disegno
@@ -3312,6 +3697,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Crea
     .boolean = Operazioni booleane

locales/ja-JP/opencadstudio.ftl

@@ -1858,6 +1858,391 @@ common =
     .dimensional = 寸法拘束
     .show-hide = 表示/非表示
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = 保存の警告
     .unable-to-save-drawing = 図面を保存できません
@@ -3301,6 +3686,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = 作成
     .boolean = ブール演算

locales/ko-KR/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = 치수 구속
     .show-hide = 표시/숨기기
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = 경고 저장
     .unable-to-save-drawing = 도면을 저장할 수 없습니다
@@ -3312,6 +3697,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = 생성
     .boolean = 불리언 연산

locales/nl-NL/opencadstudio.ftl

@@ -1868,6 +1868,391 @@ common =
     .dimensional = Maatvoering
     .show-hide = Tonen/Verbergen
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Waarschuwing opslaan
     .unable-to-save-drawing = Kan tekening niet opslaan
@@ -3311,6 +3696,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Maken
     .boolean = Booleaanse bewerkingen

locales/pl-PL/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = Wymiarowe
     .show-hide = Pokaż/Ukryj
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Zapisz ostrzeżenie
     .unable-to-save-drawing = Nie można zapisać rysunku
@@ -3312,6 +3697,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Utwórz
     .boolean = Operacje boolowskie

locales/pt-BR/opencadstudio.ftl

@@ -1868,6 +1868,391 @@ common =
     .dimensional = Dimensionais
     .show-hide = Mostrar/Ocultar
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Aviso de salvamento
     .unable-to-save-drawing = Não foi possível salvar o desenho
@@ -3313,6 +3698,11 @@ insert =
     .revolve-select-objects-or-mode = REVOLVE  Selecione objetos para revolução ou [Modo] (Enter para concluir):
     .xref-file-references = File References
 
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Criar
     .boolean = Operações booleanas

locales/ru-RU/opencadstudio.ftl

@@ -1871,6 +1871,391 @@ common =
     .dimensional = Размерные
     .show-hide = Показать/Скрыть
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Спасти предостережение
     .unable-to-save-drawing = Не удалось сохранить чертёж
@@ -3314,6 +3699,11 @@ insert =
 
     .path = Путь:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Создание
     .boolean = Булевы операции

locales/tr-TR/opencadstudio.ftl

@@ -1852,6 +1852,391 @@ common =
     .dimensional = Boyutsal
     .show-hide = Göster/Gizle
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = Kaydetme Uyarısı
     .unable-to-save-drawing = Çizim Kaydedilemiyor
@@ -3273,6 +3658,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = Oluştur
     .boolean = Boole işlemleri

locales/zh-CN/opencadstudio.ftl

@@ -1855,6 +1855,391 @@ common =
     .dimensional = 标注
     .show-hide = 显示/隐藏
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = 保存警告
     .unable-to-save-drawing = 无法保存图形
@@ -3296,6 +3681,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = 创建
     .boolean = 布尔运算

locales/zh-TW/opencadstudio.ftl

@@ -1867,6 +1867,391 @@ common =
     .dimensional = 標註
     .show-hide = 顯示/隱藏
 
+    .enter-a-valid-cell-range-such-as-a1-d10 = Enter a valid cell range such as A1:D10.
+    .named-ranges-require-a-spreadsheet-file = Named ranges require a spreadsheet file.
+    .select-a-named-range = Select a named range.
+    .the-named-range-was-not-found = The named range was not found.
+    .the-named-range-does-not-refer-to-a-worksheet-cell-range = The named range does not refer to a worksheet cell range.
+    .the-spreadsheet-contains-no-worksheets = The spreadsheet contains no worksheets.
+    .the-selected-data-source-is-empty = The selected data source is empty.
+    .the-data-link-no-longer-exists = The data link no longer exists.
+    .writing-to-this-data-link-is-disabled = Writing to this data link is disabled.
+    .writing-linked-data-is-supported-for-csv-and-text-sources = Writing linked data is supported for CSV and text sources.
+    .data-source-not-found = Data source not found: __ocs_arg_path__
+    .select-at-least-one-property = Select at least one property.
+    .select-a-data-link = Select a data link.
+    .the-selected-data-link-no-longer-exists = The selected data link no longer exists.
+    .columns-rows-width-and-height-must-be-positive-values = Columns, rows, width, and height must be positive values.
+    .choose-a-spreadsheet-file = Choose a Spreadsheet File
+    .spreadsheet-files = Spreadsheet Files
+    .enter-a-data-link-name = Enter a data link name.
+    .a-data-link-with-that-name-already-exists = A data link with that name already exists.
+    .data-link-deleted-existing-table-values-were-retained = Data link deleted; existing table values were retained.
+    .no-objects-were-selected-when-the-wizard-opened = No objects were selected when the wizard opened.
+    .add-a-drawing-or-include-the-current-drawing = Add a drawing or include the current drawing.
+    .no-extractable-objects-were-found-in-the-selected-source = No extractable objects were found in the selected source.
+    .select-at-least-one-object-type = Select at least one object type.
+    .choose-at-least-one-output = Choose at least one output.
+    .data-extraction-settings = Data Extraction Settings
+    .add-drawings = Add Drawings
+    .select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__  Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
+    .select-objects-or-settings = %__ocs_fmt_0__  Select objects or [Settings]:
+    .add-parameter = + Add parameter
+    .object-snap-3d = 3D Object Snap
+    .object-snap-on-f4-3d = 3D Object Snap On (F4)
+    .object-snap-modes-3d = 3D Object Snap modes
+    .a-numeric-shell-offset-distance-is-required = A numeric shell offset distance is required.
+    .a-selected-edge-no-longer-belongs-to-the-body = A selected edge no longer belongs to the body.
+    .a-selected-face-could-not-be-resolved = A selected face could not be resolved.
+    .a-selected-face-does-not-belong-to-the-solid = A selected face does not belong to the solid.
+    .align-scale-objects-based-on-alignment-points-yes-no-no = ALIGN  Scale objects based on alignment points? [Yes / No] <No>:
+    .annoreset-no-selected-object-has-alternate-scale-representations = ANNORESET: no selected object has alternate scale representations.
+    .annoreset-synchronized-object-s-from-the-current-scale = ANNORESET: synchronized __ocs_fmt_0__ object(s) from the current scale.
+    .adaptive-grid = Adaptive grid
+    .add-drawing-folder = Add Drawing Folder
+    .add-drawings-2 = Add drawings…
+    .add-folder = Add folder…
+    .add-parameter-2 = Add parameter
+    .all-other-rows = All other rows
+    .allow-selection-cycling = Allow selection cycling
+    .allow-writing-to-source-file = Allow writing to source file
+    .break-specify-second-break-point-or-first-point = BREAK  Specify second break point or [First point]:
+    .begin = Begin
+    .chamferedge-select-a-base-face-edge = CHAMFEREDGE: select a base face edge.
+    .cannot-delete-beyond-this = Cannot delete beyond this.
+    .cell-range = Cell range
+    .center-of-face = Center of face
+    .choose-output = Choose output
+    .clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history = Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history.
+    .column-row-settings = Column & row settings
+    .combine-identical-rows = Combine identical rows
+    .constraint-settings = Constraint Settings
+    .constraint-type = Constraint Type
+    .copied = Copied
+    .create-a-new-data-link = Create a New Data Link
+    .create-a-new-data-extraction = Create a new data extraction
+    .current-drawing = Current drawing
+    .cursor-dependent-position = Cursor-dependent position
+    .dataextraction-specify-insertion-point = DATAEXTRACTION  Specify insertion point:
+    .dataextraction-external-file-created = DATAEXTRACTION: external file created.
+    .dimbreak-select-dimension-to-add-remove-break-or-multiple = DIMBREAK  Select dimension to add/remove break or [Multiple]:
+    .dimbreak-select-dimensions-selected-press-enter-when-done = DIMBREAK  Select dimensions (__ocs_fmt_0__ selected, press Enter when done):
+    .dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto = DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:
+    .dimbreak-specify-first-break-point = DIMBREAK  Specify first break point:
+    .dimbreak-specify-second-break-point = DIMBREAK  Specify second break point:
+    .dimbreak-no-editable-dimensions-were-selected = DIMBREAK: no editable dimensions were selected.
+    .dimbreak-no-intersections-were-found = DIMBREAK: no intersections were found.
+    .dimbreak-removed-breaks-from-dimension-s = DIMBREAK: removed breaks from __ocs_fmt_0__ dimension(s).
+    .dimbreak-select-a-dimension = DIMBREAK: select a dimension.
+    .dimbreak-updated-dimension-s = DIMBREAK: updated __ocs_fmt_0__ dimension(s).
+    .dimedit-enter-new-dimension-text-measured-value = DIMEDIT  Enter new dimension text <measured value>:
+    .dimedit-enter-obliquing-angle-press-enter-for-none = DIMEDIT  Enter obliquing angle (press Enter for none):
+    .dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home = DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:
+    .dimedit-select-objects = DIMEDIT  Select objects:
+    .dimedit-specify-angle-for-dimension-text = DIMEDIT  Specify angle for dimension text:
+    .dimedit-no-editable-dimensions-were-selected = DIMEDIT: no editable dimensions were selected.
+    .dimedit-updated-dimension-s = DIMEDIT: updated __ocs_fmt_0__ dimension(s).
+    .dimjogline-select-dimension-to-add-jog-or-remove = DIMJOGLINE  Select dimension to add jog or [Remove]:
+    .dimjogline-select-dimension-to-remove-jog = DIMJOGLINE  Select dimension to remove jog:
+    .dimjogline-specify-jog-location-or-press-enter = DIMJOGLINE  Specify jog location (or press Enter):
+    .dimjogline-jog-added = DIMJOGLINE: jog added.
+    .dimjogline-jog-removed = DIMJOGLINE: jog removed.
+    .dimjogline-select-a-linear-or-aligned-dimension = DIMJOGLINE: select a linear or aligned dimension.
+    .dimspace-specify-distance-between-dimensions-or-auto-auto = DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:
+    .dimspace-enter-a-non-negative-spacing-value-or-auto = DIMSPACE: enter a non-negative spacing value or Auto.
+    .dimspace-select-a-linear-or-aligned-dimension = DIMSPACE: select a linear or aligned dimension.
+    .dimspace-select-one-or-more-linear-or-aligned-dimensions = DIMSPACE: select one or more linear or aligned dimensions.
+    .dimspace-spacing-value-cannot-be-negative = DIMSPACE: spacing value cannot be negative.
+    .dimtedit-specify-angle-for-dimension-text = DIMTEDIT  Specify angle for dimension text:
+    .dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle = DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:
+    .dimtedit-select-a-dimension = DIMTEDIT: select a dimension.
+    .divide-marker-s-placed = DIVIDE: __ocs_fmt_0__ marker(s) placed.
+    .dof = DOF: __ocs_fmt_0__
+    .draworder-selection-reordered-relative-to-reference-objects = DRAWORDER: selection reordered relative to reference objects.
+    .data-extraction = Data Extraction
+    .data-extraction-wizard = Data Extraction Wizard
+    .data-link-manager = Data Link Manager
+    .data-extraction-2 = Data extraction
+    .data-link = Data link
+    .data-link-name = Data link name
+    .data-rows = Data rows
+    .define-data-source = Define data source
+    .display-quick-properties-palette-on-selection = Display Quick Properties palette on selection
+    .display-selection-cycling-list-box = Display Selection Cycling List Box
+    .display-coordinate-input-near-crosshairs = Display coordinate input near crosshairs
+    .display-grid-beyond-limits = Display grid beyond Limits
+    .display-selection-candidate-list-box-on-click = Display selection candidate list box on click
+    .distance-and-angle-tolerances-must-be-non-negative-numbers = Distance and angle tolerances must be non-negative numbers.
+    .distance1-distance2 = Distance1 = __ocs_fmt_0__, Distance2 = __ocs_fmt_1__
+    .draw-section = Draw section
+    .drawing-table = Drawing table
+    .drawings-folders = Drawings / folders
+    .dynamic-prompts = Dynamic Prompts
+    .edit-an-existing-data-extraction = Edit an existing data extraction
+    .editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported = Editing weighted or tolerance-fitted interpolation data is not supported.
+    .empty-table = Empty table
+    .enable-pointer-input-f12 = Enable Pointer Input (F12)
+    .enable-dimension-input-fields = Enable dimension input fields
+    .enter-a-body-editing-option-shell-exit = Enter a body editing option [Shell/eXit]:
+    .enter-a-solid-editing-option-body-exit = Enter a solid editing option [Body/eXit]:
+    .entire-sheet = Entire sheet
+    .equal-x-and-y-spacing = Equal X and Y spacing
+    .external-file = External file
+    .extraction-settings = Extraction settings
+    .fillet-select-2d-polyline-r = FILLET  Select 2D polyline  [R=__ocs_fmt_0__]:
+    .fillet-select-first-object-or-polyline-radius-r = FILLET  Select first object or [Polyline/Radius]  [R=__ocs_fmt_0__]:
+    .fillet-specify-fillet-radius-or-first-point = FILLET  Specify fillet radius or first point <__ocs_fmt_0__>:
+    .fillet-specify-second-point-for-radius = FILLET  Specify second point for radius:
+    .file = File
+    .file-not-found-check-the-saved-path = File not found — check the saved path.
+    .first-row = First row
+    .fit-data-cannot-be-purged-without-a-stored-control-curve = Fit data cannot be purged without a stored control curve.
+    .fit-data-does-not-define-a-valid-control-curve = Fit data does not define a valid control curve.
+    .fit-points-do-not-define-a-valid-spline = Fit points do not define a valid spline.
+    .formula = Formula
+    .full-path = Full path
+    .fully-constrained-no-remaining-degrees-of-freedom = Fully constrained — no remaining degrees of freedom
+    .grid-on-f7 = Grid On (F7)
+    .grid-x-spacing = Grid X spacing:
+    .grid-y-spacing = Grid Y spacing:
+    .grid-behavior = Grid behavior
+    .grid-spacing = Grid spacing
+    .hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT  Pattern:%__ocs_fmt_0__  Scale:%__ocs_fmt_1__  Angle:%__ocs_fmt_2__  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
+    .intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
+    .intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
+    .intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
+    .intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
+    .intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
+    .intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection = INTERSECT: the selected objects do not have a supported coplanar surface intersection.
+    .intersect-the-selected-topology-could-not-be-intersected-safely = INTERSECT: the selected topology could not be intersected safely.
+    .include-current-drawing = Include current drawing
+    .include-subfolders = Include subfolders
+    .increment-angle = Increment angle:
+    .indicator-fill-color = Indicator Fill Color
+    .indicator-transparency = Indicator Transparency
+    .insert-table = Insert Table
+    .insert-data-extraction-table-into-drawing = Insert data extraction table into drawing
+    .insert-options = Insert options
+    .insert-table-after-saving-link = Insert table after saving link
+    .insertion-behavior = Insertion behavior
+    .keep-table-updated-to-source-formatting = Keep table updated to source formatting
+    .knot = Knot
+    .leader-enter-an-annotation-option-none-mtext = LEADER  Enter an annotation option [None/Mtext]:
+    .leader-enter-first-line-of-annotation-text-or-options = LEADER  Enter first line of annotation text or <options>:
+    .leader-enter-leader-formatting-option-spline-straight-arrow-none-exit = LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:
+    .leader-enter-next-line-of-annotation-text = LEADER  Enter next line of annotation text:
+    .leader-specify-leader-start-point = LEADER  Specify leader start point:
+    .leader-specify-next-point-or-annotation-format-undo-annotation = LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:
+    .leader-specify-next-point = LEADER  Specify next point:
+    .lengthen-select-an-object-to-change-or-undo = LENGTHEN  Select an object to change or [Undo]:
+    .lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic = LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:
+    .loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only = LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:
+    .loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish = LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)
+    .link-option = Link option
+    .link-settings = Link settings
+    .live-section-enabled = Live Section Enabled
+    .ltype-gen = Ltype gen
+    .measure-0-markers-placed = MEASURE: 0 markers placed.
+    .measure-marker-s-placed = MEASURE: __ocs_fmt_0__ marker(s) placed.
+    .maintain-associativity = Maintain associativity
+    .major-line-every = Major line every:
+    .midpoint-on-edge = Midpoint on edge
+    .moment-of-inertia = Moment of inertia
+    .more-options = More options
+    .move-down = Move Down
+    .move-up = Move Up
+    .named-parameters = Named Parameters
+    .named-range = Named range
+    .nearest-to-face = Nearest to face
+    .no-path = No path
+    .no-preview-available = No preview available.
+    .no-surfaces-selected = No surfaces selected.
+    .objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales = OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales.
+    .objectscale-the-selected-objects-do-not-have-the-current-scale = OBJECTSCALE: the selected objects do not have the current scale.
+    .objectscale-the-current-scale-on-object-s = OBJECTSCALE: __ocs_fmt_0__ the current scale on __ocs_fmt_1__ object(s).
+    .object-snap-on-f3 = Object Snap On (F3)
+    .object-snap-tracking-on-f11 = Object Snap Tracking On (F11)
+    .object-snap-modes-2 = Object Snap modes
+    .on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry = On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry.
+    .one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve = One or more parametric constraints conflict or are redundant
+        Click to remove one and re-solve
+    .ortho-mode-f8 = Ortho mode (F8)
+    .output-data-to-external-file = Output data to external file
+    .output-file = Output file
+    .pedit-convert-lines-and-arcs-to-polylines-yes-no-yes = PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:
+    .pedit-enter-polyline-linetype-generation-option-on-off = PEDIT  Enter polyline linetype generation option [ON/OFF]:
+    .pedit-select-polyline-or-a-line-arc-to-convert-or-multiple = PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:
+    .palette-location = Palette Location
+    .parameter-already-exists = Parameter '__ocs_fmt_0__' already exists.
+    .parameter = Parameter '__ocs_fmt_0__': __ocs_fmt_1__
+    .parameters = Parameters
+    .perpendicular-objects-must-share-an-intersection-point = Perpendicular objects must share an intersection point
+    .perpendicular-to-face = Perpendicular to face
+    .plane = Plane
+    .pointer-input = Pointer Input
+    .polar-angle-settings = Polar Angle Settings
+    .polar-tracking-on-f10 = Polar Tracking On (F10)
+    .polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes = Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes.
+    .press-enter-to-accept-the-chamfer-or-distance = Press Enter to accept the chamfer or [Distance]:
+    .principal-directions = Principal directions
+    .principal-moments = Principal moments
+    .priority = Priority
+    .product-of-inertia = Product of inertia
+    .reverse-select-line-polyline-spline-or-helix-to-reverse = REVERSE  Select line, polyline, spline or helix to reverse:
+    .radii-of-gyration = Radii of gyration
+    .range = Range
+    .recent-colors = Recent Colors
+    .reference-changes-are-not-available-on-web-the-reference-list-is-read-only = Reference changes are not available on web — the reference list is read-only.
+    .refine-data = Refine data
+    .relative-path = Relative path
+    .remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope = Remaining degrees of freedom in the current parametric constraint scope
+    .requires-an-integer-between-0-and-99 = Requires an integer between 0 and 99.
+    .requires-numeric-distance-or-two-points = Requires numeric distance or two points.
+    .sectionplane-align-section-to-front-back-top-bottom-left-right-top = SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:
+    .sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane = SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:
+    .sectionplane-specify-next-point-or-enter-to-complete = SECTIONPLANE  Specify next point or ENTER to complete:
+    .sectionplane-specify-next-point = SECTIONPLANE  Specify next point:
+    .sectionplane-specify-point-in-direction-of-section-view = SECTIONPLANE  Specify point in direction of section view:
+    .sectionplane-specify-start-point = SECTIONPLANE  Specify start point:
+    .sectionplane-specify-through-point = SECTIONPLANE  Specify through point:
+    .setbylayer-no-properties-required-changes = SETBYLAYER: no properties required changes.
+    .setbylayer-reset-entity-entities-to-bylayer = SETBYLAYER: reset __ocs_fmt_0__ entity/entities to ByLayer.
+    .setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only = SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)
+    .shell-supports-rectangular-boxes-circular-cylinders-and-spheres = SHELL supports rectangular boxes, circular cylinders, and spheres.
+    .shell-solid-updated = SHELL: solid updated.
+    .splinedit-fit-data-add-delete-move-purge-tangents-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:
+    .splinedit-fit-data-add-delete-move-purge-exit-exit = SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:
+    .splinedit-select-any-open-curves-to-join-to-source = SPLINEDIT  Select any open curves to join to source:
+    .splinedit-specify-a-point-on-the-spline-exit = SPLINEDIT  Specify a point on the spline <exit>:
+    .splinedit-specify-control-vertex-to-delete = SPLINEDIT  Specify control vertex to delete:
+    .splinedit-specify-control-vertex = SPLINEDIT  Specify control vertex:
+    .splinedit-specify-end-tangent-or-system-default = SPLINEDIT  Specify end tangent or [System default]:
+    .splinedit-specify-existing-fit-point-on-spline-exit = SPLINEDIT  Specify existing fit point on spline <exit>:
+    .splinedit-specify-new-fit-point-to-add-exit = SPLINEDIT  Specify new fit point to add <exit>:
+    .splinedit-specify-new-location-or-next-previous-select-point-exit-next = SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:
+    .splinedit-specify-new-point-or-after-before-exit = SPLINEDIT  Specify new point or [After/Before] <exit>:
+    .splinedit-specify-precision-0-99-10-straight-segments = SPLINEDIT  Specify precision 0-99 <10> (straight segments):
+    .splinedit-specify-start-tangent-or-system-default = SPLINEDIT  Specify start tangent or [System default]:
+    .splinedit-add-delete-elevate-order-move-weight-exit-exit = SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:
+    .splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit = SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:
+    .subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes = SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:
+    .subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
+    .subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
+    .subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
+    .subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
+    .subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
+    .subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
+    .subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
+    .subtract-the-selected-coincident-geometry-is-ambiguous = SUBTRACT: the selected coincident geometry is ambiguous.
+    .subtract-the-selected-geometry-includes-an-unsupported-surface-intersection = SUBTRACT: the selected geometry includes an unsupported surface intersection.
+    .subtract-the-selected-topology-could-not-be-cut-safely = SUBTRACT: the selected topology could not be cut safely.
+    .second-row = Second row
+    .section-plane = Section Plane
+    .section-plane-offset = Section Plane Offset
+    .select-a-3d-solid-or-surface-edge = Select a 3D solid or surface edge.
+    .select-a-3d-solid = Select a 3D solid.
+    .select-a-3d-solid-2 = Select a 3D solid:
+    .select-a-data-link-or-create-a-new-one = Select a data link or create a new one.
+    .select-an-edge-or-loop-distance = Select an edge or [Loop/Distance]:
+    .select-edge-of-loop-or-edge-distance = Select edge of loop or [Edge/Distance]:
+    .select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type = Select face or any point to locate section line or [Draw section/Orthographic/Type]:
+    .select-faces-to-add-undo-remove-all-done = Select faces to add [Undo/Remove/ALL] <done>:
+    .select-faces-to-remove-undo-add-all-done = Select faces to remove [Undo/Add/ALL] <done>:
+    .select-objects-in-the-current-drawing = Select objects in the current drawing
+    .select-properties = Select properties
+    .select-spline-fit-polylines = Select spline-fit polylines:
+    .select-surfaces-to-thicken = Select surfaces to thicken:
+    .selected-objects-in-current-drawing = Selected objects in current drawing
+    .set-cell-styles = Set cell styles
+    .sheet = Sheet
+    .show-associativity = Show associativity
+    .show-command-prompting-and-command-input-near-crosshairs = Show command prompting and command input near crosshairs
+    .show-count-column = Show count column
+    .show-cycling-badge-when-objects-overlap = Show cycling badge when objects overlap
+    .show-name-column = Show name column
+    .show-values-and-parameter-names-on-constraint-markers = Show values and parameter names on constraint markers
+    .slice = Slice
+    .slice-depth = Slice Depth
+    .snap-on-f9 = Snap On (F9)
+    .snap-x-spacing = Snap X spacing:
+    .snap-y-spacing = Snap Y spacing:
+    .snap-spacing = Snap spacing
+    .snap-type = Snap type
+    .specify-distance1-or-expression = Specify Distance1 or [Expression] <__ocs_fmt_0__>:
+    .specify-distance2-or-expression = Specify Distance2 or [Expression] <__ocs_fmt_0__>:
+    .specify-insertion-point = Specify insertion point
+    .specify-point-or-enter-arc-length = Specify point or enter arc length:
+    .specify-point-or-enter-radius = Specify point or enter radius:
+    .specify-replacement-path-xref-path-find-old-new = Specify replacement path: XREF Path Find <old> <new>
+    .specify-second-point = Specify second point:
+    .specify-the-shell-offset-distance = Specify the shell offset distance <__ocs_fmt_0__>:
+    .specify-thickness = Specify thickness
+    .specify-window = Specify window
+    .spline-cannot-be-converted-within-the-requested-precision = Spline cannot be converted within the requested precision.
+    .spreadsheet-links = Spreadsheet Links
+    .start-from-data-extraction = Start from data extraction
+    .start-from-data-link = Start from data link
+    .start-from-empty-table = Start from empty table
+    .state2 = State2
+    .static-quadrant-location = Static quadrant location
+    .status-linked = Status: Linked
+    .status-source-not-found = Status: Source not found
+    .surface-associativity = Surface Associativity
+    .surface-type-2 = Surface Type
+    .thicken-created-solid-s-surface-s-could-not-be-thickened-exactly = THICKEN: created __ocs_fmt_0__ solid(s); __ocs_fmt_1__ surface(s) could not be thickened exactly.
+    .tab-separated-text = Tab-separated text
+    .tangent-objects-must-share-an-intersection-point = Tangent objects must share an intersection point
+    .tangent-point-must-differ-from-the-fit-endpoint = Tangent point must differ from the fit endpoint.
+    .the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained = The INTERSECT result could not be displayed completely. The original objects were retained.
+    .the-intersect-result-could-not-be-encoded-as-acis = The INTERSECT result could not be encoded as ACIS.
+    .the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained = The SUBTRACT result could not be displayed completely. The original objects were retained.
+    .the-subtract-result-could-not-be-encoded-as-acis = The SUBTRACT result could not be encoded as ACIS.
+    .the-union-result-could-not-be-encoded-as-acis = The UNION result could not be encoded as ACIS.
+    .the-chamfer-history-could-not-be-recorded = The chamfer history could not be recorded.
+    .the-edge-body-could-not-be-updated = The edge body could not be updated.
+    .the-edge-body-history-could-not-be-created = The edge body history could not be created.
+    .the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back = The offset removes all material. Use a smaller distance or add a face back.
+    .the-region-could-not-be-encoded-as-acis = The region could not be encoded as ACIS.
+    .the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained = The result could not be displayed completely. The original edge body was retained.
+    .the-selected-base-face-no-longer-belongs-to-the-body = The selected base face no longer belongs to the body.
+    .the-selected-drawing-data-is-ready-to-be-extracted = The selected drawing data is ready to be extracted.
+    .the-selected-object-is-no-longer-available = The selected object is no longer available.
+    .the-shell-could-not-be-constructed-from-the-selected-solid-and-distance = The shell could not be constructed from the selected solid and distance.
+    .the-shell-offset-distance-must-be-nonzero = The shell offset distance must be nonzero.
+    .trimmed-surface = Trimmed surface
+    .trimming-edges = Trimming edges
+    .trims = Trims
+    .type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
+    .u-isolines-2 = U isolines
+    .union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
+    .union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
+    .union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
+    .union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
+    .union-the-selected-topology-could-not-be-closed-safely = UNION: the selected topology could not be closed safely.
+    .use-a-previous-extraction-as-a-template = Use a previous extraction as a template
+    .use-source-formatting = Use source formatting
+    .used-by = Used by
+    .v-isolines-2 = V isolines
+    .value-must-be-nonzero = Value must be nonzero.
+    .viewing-direction = Viewing Direction
+    .wipeout-specify-next-point-or-close-undo = WIPEOUT  Specify next point or [Close/Undo]:
+    .wipeout-specify-next-point-or-undo = WIPEOUT  Specify next point or [Undo]:
+    .wipeout-specify-next-point = WIPEOUT  Specify next point:
+    .wireframe-type = Wireframe type
+    .mtp-specify-first-point-of-mid = _mtp Specify first point of mid:
+    .mtp-specify-second-point-of-mid = _mtp Specify second point of mid:
+    .formula-2 = formula
+    .name = name
+    .aligned-object-s = __ocs_fmt_0__: aligned __ocs_fmt_1__ object(s).
+    .select-annotative-objects = __ocs_fmt_0__  Select annotative objects:
+    .parameter-s-applied = __ocs_fmt_0__ parameter(s) applied.
+    .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
+    .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
+    .conflicting = ⚠ __ocs_fmt_0__ conflicting
 errors =
     .save-warning = 儲存警告
     .unable-to-save-drawing = 無法儲存圖形
@@ -3308,6 +3693,11 @@ insert =
 
     .path = Path:
     .xref-file-references = File References
+    .xattach = XATTACH
+    .xattach-specify-rotation-angle-0 = XATTACH  Specify rotation angle <0>:
+    .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
+    .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
+    .xref = XREF: __ocs_fmt_0__
 model =
     .create = 建立
     .boolean = 布林運算

src/locale_catalog.rs

@@ -3151,7 +3151,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "XREF  Reloaded \"{}\"" => Some(("insert", "xref-reloaded")),
         "XREF  Save the drawing first to resolve relative XREF paths." => Some(("insert", "xref-save-the-drawing-first-to-resolve-relativ")),
         "XREF  Unloaded (skipped): \"{}\"" => Some(("common", "xref-unloaded-skipped")),
-        "XREF: '{}' ships with reference operations (Task 8/9)." => Some(("insert", "xref-ships-with-reference-operations")),
         "XREF: \"{}\" set to Overlay." => Some(("insert", "xref-set-to-overlay")),
         "XREF: bound \"{}\"." => Some(("insert", "xref-bound")),
         "XREF: bound \"{}\" with {} unremapped style handles (see bind limitations)." => Some(("insert", "xref-bound-with-unremapped-handles")),
@@ -3630,6 +3629,33 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Backup Files" => Some(("common", "backup-files")),
         "Save Block As" => Some(("common", "save-block-as")),
         "Save Data Extraction" => Some(("common", "save-data-extraction")),
+        "Enter a valid cell range such as A1:D10." => Some(("common", "enter-a-valid-cell-range-such-as-a1-d10")),
+        "Named ranges require a spreadsheet file." => Some(("common", "named-ranges-require-a-spreadsheet-file")),
+        "Select a named range." => Some(("common", "select-a-named-range")),
+        "The named range was not found." => Some(("common", "the-named-range-was-not-found")),
+        "The named range does not refer to a worksheet cell range." => Some(("common", "the-named-range-does-not-refer-to-a-worksheet-cell-range")),
+        "The spreadsheet contains no worksheets." => Some(("common", "the-spreadsheet-contains-no-worksheets")),
+        "The selected data source is empty." => Some(("common", "the-selected-data-source-is-empty")),
+        "The data link no longer exists." => Some(("common", "the-data-link-no-longer-exists")),
+        "Writing to this data link is disabled." => Some(("common", "writing-to-this-data-link-is-disabled")),
+        "Writing linked data is supported for CSV and text sources." => Some(("common", "writing-linked-data-is-supported-for-csv-and-text-sources")),
+        "Data source not found: %{path}" => Some(("common", "data-source-not-found")),
+        "Select at least one property." => Some(("common", "select-at-least-one-property")),
+        "Select a data link." => Some(("common", "select-a-data-link")),
+        "The selected data link no longer exists." => Some(("common", "the-selected-data-link-no-longer-exists")),
+        "Columns, rows, width, and height must be positive values." => Some(("common", "columns-rows-width-and-height-must-be-positive-values")),
+        "Choose a Spreadsheet File" => Some(("common", "choose-a-spreadsheet-file")),
+        "Spreadsheet Files" => Some(("common", "spreadsheet-files")),
+        "Enter a data link name." => Some(("common", "enter-a-data-link-name")),
+        "A data link with that name already exists." => Some(("common", "a-data-link-with-that-name-already-exists")),
+        "Data link deleted; existing table values were retained." => Some(("common", "data-link-deleted-existing-table-values-were-retained")),
+        "No objects were selected when the wizard opened." => Some(("common", "no-objects-were-selected-when-the-wizard-opened")),
+        "Add a drawing or include the current drawing." => Some(("common", "add-a-drawing-or-include-the-current-drawing")),
+        "No extractable objects were found in the selected source." => Some(("common", "no-extractable-objects-were-found-in-the-selected-source")),
+        "Select at least one object type." => Some(("common", "select-at-least-one-object-type")),
+        "Choose at least one output." => Some(("common", "choose-at-least-one-output")),
+        "Data Extraction Settings" => Some(("common", "data-extraction-settings")),
+        "Add Drawings" => Some(("common", "add-drawings")),
         "CSV" => Some(("common", "csv")),
         "Export STL" => Some(("common", "export-stl")),
         "STL Files" => Some(("common", "stl-files")),
@@ -4692,6 +4718,368 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Enter a GitHub URL or repository in owner/repo format." => Some(("common", "enter-a-github-url-or-repository-in-owner-repo-format")),
         "DWGUNITS  Convert drawing to:" => Some(("common", "dwgunits-convert-drawing-to")),
         "Opened plot preview." => Some(("common", "opened-plot-preview")),
+        "%{cmd}  Select objects or [Settings] (%{count} selected, Enter to apply):" => Some(("common", "select-objects-or-settings-selected-enter-to-apply")),
+        "%{cmd}  Select objects or [Settings]:" => Some(("common", "select-objects-or-settings")),
+        "+ Add parameter" => Some(("common", "add-parameter")),
+        "3D Object Snap" => Some(("common", "object-snap-3d")),
+        "3D Object Snap On (F4)" => Some(("common", "object-snap-on-f4-3d")),
+        "3D Object Snap modes" => Some(("common", "object-snap-modes-3d")),
+        "A numeric shell offset distance is required." => Some(("common", "a-numeric-shell-offset-distance-is-required")),
+        "A selected edge no longer belongs to the body." => Some(("common", "a-selected-edge-no-longer-belongs-to-the-body")),
+        "A selected face could not be resolved." => Some(("common", "a-selected-face-could-not-be-resolved")),
+        "A selected face does not belong to the solid." => Some(("common", "a-selected-face-does-not-belong-to-the-solid")),
+        "ALIGN  Scale objects based on alignment points? [Yes / No] <No>:" => Some(("common", "align-scale-objects-based-on-alignment-points-yes-no-no")),
+        "ANNORESET: no selected object has alternate scale representations." => Some(("common", "annoreset-no-selected-object-has-alternate-scale-representations")),
+        "ANNORESET: synchronized {} object(s) from the current scale." => Some(("common", "annoreset-synchronized-object-s-from-the-current-scale")),
+        "Adaptive grid" => Some(("common", "adaptive-grid")),
+        "Add Drawing Folder" => Some(("common", "add-drawing-folder")),
+        "Add drawings…" => Some(("common", "add-drawings-2")),
+        "Add folder…" => Some(("common", "add-folder")),
+        "Add parameter" => Some(("common", "add-parameter-2")),
+        "All other rows" => Some(("common", "all-other-rows")),
+        "Allow selection cycling" => Some(("common", "allow-selection-cycling")),
+        "Allow writing to source file" => Some(("common", "allow-writing-to-source-file")),
+        "BREAK  Specify second break point or [First point]:" => Some(("common", "break-specify-second-break-point-or-first-point")),
+        "Begin" => Some(("common", "begin")),
+        "CHAMFEREDGE: select a base face edge." => Some(("common", "chamferedge-select-a-base-face-edge")),
+        "Cannot delete beyond this." => Some(("common", "cannot-delete-beyond-this")),
+        "Cell range" => Some(("common", "cell-range")),
+        "Center of face" => Some(("common", "center-of-face")),
+        "Choose output" => Some(("common", "choose-output")),
+        "Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history." => Some(("common", "clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history")),
+        "Column & row settings" => Some(("common", "column-row-settings")),
+        "Combine identical rows" => Some(("common", "combine-identical-rows")),
+        "Constraint Settings" => Some(("common", "constraint-settings")),
+        "Constraint Type" => Some(("common", "constraint-type")),
+        "Copied" => Some(("common", "copied")),
+        "Create a New Data Link" => Some(("common", "create-a-new-data-link")),
+        "Create a new data extraction" => Some(("common", "create-a-new-data-extraction")),
+        "Current drawing" => Some(("common", "current-drawing")),
+        "Cursor-dependent position" => Some(("common", "cursor-dependent-position")),
+        "DATAEXTRACTION  Specify insertion point:" => Some(("common", "dataextraction-specify-insertion-point")),
+        "DATAEXTRACTION: external file created." => Some(("common", "dataextraction-external-file-created")),
+        "DIMBREAK  Select dimension to add/remove break or [Multiple]:" => Some(("common", "dimbreak-select-dimension-to-add-remove-break-or-multiple")),
+        "DIMBREAK  Select dimensions ({} selected, press Enter when done):" => Some(("common", "dimbreak-select-dimensions-selected-press-enter-when-done")),
+        "DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:" => Some(("common", "dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto")),
+        "DIMBREAK  Specify first break point:" => Some(("common", "dimbreak-specify-first-break-point")),
+        "DIMBREAK  Specify second break point:" => Some(("common", "dimbreak-specify-second-break-point")),
+        "DIMBREAK: no editable dimensions were selected." => Some(("common", "dimbreak-no-editable-dimensions-were-selected")),
+        "DIMBREAK: no intersections were found." => Some(("common", "dimbreak-no-intersections-were-found")),
+        "DIMBREAK: removed breaks from {} dimension(s)." => Some(("common", "dimbreak-removed-breaks-from-dimension-s")),
+        "DIMBREAK: select a dimension." => Some(("common", "dimbreak-select-a-dimension")),
+        "DIMBREAK: updated {} dimension(s)." => Some(("common", "dimbreak-updated-dimension-s")),
+        "DIMEDIT  Enter new dimension text <measured value>:" => Some(("common", "dimedit-enter-new-dimension-text-measured-value")),
+        "DIMEDIT  Enter obliquing angle (press Enter for none):" => Some(("common", "dimedit-enter-obliquing-angle-press-enter-for-none")),
+        "DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:" => Some(("common", "dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home")),
+        "DIMEDIT  Select objects:" => Some(("common", "dimedit-select-objects")),
+        "DIMEDIT  Specify angle for dimension text:" => Some(("common", "dimedit-specify-angle-for-dimension-text")),
+        "DIMEDIT: no editable dimensions were selected." => Some(("common", "dimedit-no-editable-dimensions-were-selected")),
+        "DIMEDIT: updated {} dimension(s)." => Some(("common", "dimedit-updated-dimension-s")),
+        "DIMJOGLINE  Select dimension to add jog or [Remove]:" => Some(("common", "dimjogline-select-dimension-to-add-jog-or-remove")),
+        "DIMJOGLINE  Select dimension to remove jog:" => Some(("common", "dimjogline-select-dimension-to-remove-jog")),
+        "DIMJOGLINE  Specify jog location (or press Enter):" => Some(("common", "dimjogline-specify-jog-location-or-press-enter")),
+        "DIMJOGLINE: jog added." => Some(("common", "dimjogline-jog-added")),
+        "DIMJOGLINE: jog removed." => Some(("common", "dimjogline-jog-removed")),
+        "DIMJOGLINE: select a linear or aligned dimension." => Some(("common", "dimjogline-select-a-linear-or-aligned-dimension")),
+        "DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:" => Some(("common", "dimspace-specify-distance-between-dimensions-or-auto-auto")),
+        "DIMSPACE: enter a non-negative spacing value or Auto." => Some(("common", "dimspace-enter-a-non-negative-spacing-value-or-auto")),
+        "DIMSPACE: select a linear or aligned dimension." => Some(("common", "dimspace-select-a-linear-or-aligned-dimension")),
+        "DIMSPACE: select one or more linear or aligned dimensions." => Some(("common", "dimspace-select-one-or-more-linear-or-aligned-dimensions")),
+        "DIMSPACE: spacing value cannot be negative." => Some(("common", "dimspace-spacing-value-cannot-be-negative")),
+        "DIMTEDIT  Specify angle for dimension text:" => Some(("common", "dimtedit-specify-angle-for-dimension-text")),
+        "DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:" => Some(("common", "dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle")),
+        "DIMTEDIT: select a dimension." => Some(("common", "dimtedit-select-a-dimension")),
+        "DIVIDE: {count} marker(s) placed." => Some(("common", "divide-marker-s-placed")),
+        "DOF: {dof}" => Some(("common", "dof")),
+        "DRAWORDER: selection reordered relative to reference objects." => Some(("common", "draworder-selection-reordered-relative-to-reference-objects")),
+        "Data Extraction" => Some(("common", "data-extraction")),
+        "Data Extraction Wizard" => Some(("common", "data-extraction-wizard")),
+        "Data Link Manager" => Some(("common", "data-link-manager")),
+        "Data extraction" => Some(("common", "data-extraction-2")),
+        "Data link" => Some(("common", "data-link")),
+        "Data link name" => Some(("common", "data-link-name")),
+        "Data rows" => Some(("common", "data-rows")),
+        "Define data source" => Some(("common", "define-data-source")),
+        "Display Quick Properties palette on selection" => Some(("common", "display-quick-properties-palette-on-selection")),
+        "Display Selection Cycling List Box" => Some(("common", "display-selection-cycling-list-box")),
+        "Display coordinate input near crosshairs" => Some(("common", "display-coordinate-input-near-crosshairs")),
+        "Display grid beyond Limits" => Some(("common", "display-grid-beyond-limits")),
+        "Display selection candidate list box on click" => Some(("common", "display-selection-candidate-list-box-on-click")),
+        "Distance and angle tolerances must be non-negative numbers." => Some(("common", "distance-and-angle-tolerances-must-be-non-negative-numbers")),
+        "Distance1 = {:.4}, Distance2 = {:.4}" => Some(("common", "distance1-distance2")),
+        "Draw section" => Some(("common", "draw-section")),
+        "Drawing table" => Some(("common", "drawing-table")),
+        "Drawings / folders" => Some(("common", "drawings-folders")),
+        "Dynamic Prompts" => Some(("common", "dynamic-prompts")),
+        "Edit an existing data extraction" => Some(("common", "edit-an-existing-data-extraction")),
+        "Editing weighted or tolerance-fitted interpolation data is not supported." => Some(("common", "editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported")),
+        "Empty table" => Some(("common", "empty-table")),
+        "Enable Pointer Input (F12)" => Some(("common", "enable-pointer-input-f12")),
+        "Enable dimension input fields" => Some(("common", "enable-dimension-input-fields")),
+        "Enter a body editing option [Shell/eXit]:" => Some(("common", "enter-a-body-editing-option-shell-exit")),
+        "Enter a solid editing option [Body/eXit]:" => Some(("common", "enter-a-solid-editing-option-body-exit")),
+        "Entire sheet" => Some(("common", "entire-sheet")),
+        "Equal X and Y spacing" => Some(("common", "equal-x-and-y-spacing")),
+        "External file" => Some(("common", "external-file")),
+        "Extraction settings" => Some(("common", "extraction-settings")),
+        "FILLET  Select 2D polyline  [R={:.4}]:" => Some(("common", "fillet-select-2d-polyline-r")),
+        "FILLET  Select first object or [Polyline/Radius]  [R={:.4}]:" => Some(("common", "fillet-select-first-object-or-polyline-radius-r")),
+        "FILLET  Specify fillet radius or first point <{:.4}>:" => Some(("common", "fillet-specify-fillet-radius-or-first-point")),
+        "FILLET  Specify second point for radius:" => Some(("common", "fillet-specify-second-point-for-radius")),
+        "File" => Some(("common", "file")),
+        "File not found — check the saved path." => Some(("common", "file-not-found-check-the-saved-path")),
+        "First row" => Some(("common", "first-row")),
+        "Fit data cannot be purged without a stored control curve." => Some(("common", "fit-data-cannot-be-purged-without-a-stored-control-curve")),
+        "Fit data does not define a valid control curve." => Some(("common", "fit-data-does-not-define-a-valid-control-curve")),
+        "Fit points do not define a valid spline." => Some(("common", "fit-points-do-not-define-a-valid-spline")),
+        "Formula" => Some(("common", "formula")),
+        "Full path" => Some(("common", "full-path")),
+        "Fully constrained — no remaining degrees of freedom" => Some(("common", "fully-constrained-no-remaining-degrees-of-freedom")),
+        "Grid On (F7)" => Some(("common", "grid-on-f7")),
+        "Grid X spacing:" => Some(("common", "grid-x-spacing")),
+        "Grid Y spacing:" => Some(("common", "grid-y-spacing")),
+        "Grid behavior" => Some(("common", "grid-behavior")),
+        "Grid spacing" => Some(("common", "grid-spacing")),
+        "HATCHEDIT  Pattern:%{name}  Scale:%{scale}  Angle:%{angle}  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:" => Some(("common", "hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties")),
+        "INTERSECT: created %{count} result object(s)." => Some(("common", "intersect-created-result-object-s")),
+        "INTERSECT: no positive-area common result; %{count} original object(s) retained." => Some(("common", "intersect-no-positive-area-common-result-original-object-s-retained")),
+        "INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type." => Some(("common", "intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type")),
+        "INTERSECT: the retained object could not be updated." => Some(("common", "intersect-the-retained-object-could-not-be-updated")),
+        "INTERSECT: the selected coincident geometry is ambiguous." => Some(("common", "intersect-the-selected-coincident-geometry-is-ambiguous")),
+        "INTERSECT: the selected objects do not have a supported coplanar surface intersection." => Some(("common", "intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection")),
+        "INTERSECT: the selected topology could not be intersected safely." => Some(("common", "intersect-the-selected-topology-could-not-be-intersected-safely")),
+        "Include current drawing" => Some(("common", "include-current-drawing")),
+        "Include subfolders" => Some(("common", "include-subfolders")),
+        "Increment angle:" => Some(("common", "increment-angle")),
+        "Indicator Fill Color" => Some(("common", "indicator-fill-color")),
+        "Indicator Transparency" => Some(("common", "indicator-transparency")),
+        "Insert Table" => Some(("common", "insert-table")),
+        "Insert data extraction table into drawing" => Some(("common", "insert-data-extraction-table-into-drawing")),
+        "Insert options" => Some(("common", "insert-options")),
+        "Insert table after saving link" => Some(("common", "insert-table-after-saving-link")),
+        "Insertion behavior" => Some(("common", "insertion-behavior")),
+        "Keep table updated to source formatting" => Some(("common", "keep-table-updated-to-source-formatting")),
+        "Knot" => Some(("common", "knot")),
+        "LEADER  Enter an annotation option [None/Mtext]:" => Some(("common", "leader-enter-an-annotation-option-none-mtext")),
+        "LEADER  Enter first line of annotation text or <options>:" => Some(("common", "leader-enter-first-line-of-annotation-text-or-options")),
+        "LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:" => Some(("common", "leader-enter-leader-formatting-option-spline-straight-arrow-none-exit")),
+        "LEADER  Enter next line of annotation text:" => Some(("common", "leader-enter-next-line-of-annotation-text")),
+        "LEADER  Specify leader start point:" => Some(("common", "leader-specify-leader-start-point")),
+        "LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:" => Some(("common", "leader-specify-next-point-or-annotation-format-undo-annotation")),
+        "LEADER  Specify next point:" => Some(("common", "leader-specify-next-point")),
+        "LENGTHEN  Select an object to change or [Undo]:" => Some(("common", "lengthen-select-an-object-to-change-or-undo")),
+        "LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:" => Some(("common", "lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic")),
+        "LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:" => Some(("common", "loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only")),
+        "LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:" => Some(("common", "loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only")),
+        "LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)" => Some(("common", "loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish")),
+        "Link option" => Some(("common", "link-option")),
+        "Link settings" => Some(("common", "link-settings")),
+        "Live Section Enabled" => Some(("common", "live-section-enabled")),
+        "Ltype gen" => Some(("common", "ltype-gen")),
+        "MEASURE: 0 markers placed." => Some(("common", "measure-0-markers-placed")),
+        "MEASURE: {count} marker(s) placed." => Some(("common", "measure-marker-s-placed")),
+        "Maintain associativity" => Some(("common", "maintain-associativity")),
+        "Major line every:" => Some(("common", "major-line-every")),
+        "Midpoint on edge" => Some(("common", "midpoint-on-edge")),
+        "Moment of inertia" => Some(("common", "moment-of-inertia")),
+        "More options" => Some(("common", "more-options")),
+        "Move Down" => Some(("common", "move-down")),
+        "Move Up" => Some(("common", "move-up")),
+        "Named Parameters" => Some(("common", "named-parameters")),
+        "Named range" => Some(("common", "named-range")),
+        "Nearest to face" => Some(("common", "nearest-to-face")),
+        "No path" => Some(("common", "no-path")),
+        "No preview available." => Some(("common", "no-preview-available")),
+        "No surfaces selected." => Some(("common", "no-surfaces-selected")),
+        "OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales." => Some(("common", "objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales")),
+        "OBJECTSCALE: the selected objects do not have the current scale." => Some(("common", "objectscale-the-selected-objects-do-not-have-the-current-scale")),
+        "OBJECTSCALE: {} the current scale on {} object(s)." => Some(("common", "objectscale-the-current-scale-on-object-s")),
+        "Object Snap On (F3)" => Some(("common", "object-snap-on-f3")),
+        "Object Snap Tracking On (F11)" => Some(("common", "object-snap-tracking-on-f11")),
+        "Object Snap modes" => Some(("common", "object-snap-modes-2")),
+        "On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry." => Some(("common", "on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry")),
+        "One or more parametric constraints conflict or are redundant\nClick to remove one and re-solve" => Some(("common", "one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve")),
+        "Ortho mode (F8)" => Some(("common", "ortho-mode-f8")),
+        "Output data to external file" => Some(("common", "output-data-to-external-file")),
+        "Output file" => Some(("common", "output-file")),
+        "PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:" => Some(("common", "pedit-convert-lines-and-arcs-to-polylines-yes-no-yes")),
+        "PEDIT  Enter polyline linetype generation option [ON/OFF]:" => Some(("common", "pedit-enter-polyline-linetype-generation-option-on-off")),
+        "PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:" => Some(("common", "pedit-select-polyline-or-a-line-arc-to-convert-or-multiple")),
+        "Palette Location" => Some(("common", "palette-location")),
+        "Parameter '{}' already exists." => Some(("common", "parameter-already-exists")),
+        "Parameter '{}': {}" => Some(("common", "parameter")),
+        "Parameters" => Some(("common", "parameters")),
+        "Perpendicular objects must share an intersection point" => Some(("common", "perpendicular-objects-must-share-an-intersection-point")),
+        "Perpendicular to face" => Some(("common", "perpendicular-to-face")),
+        "Plane" => Some(("common", "plane")),
+        "Pointer Input" => Some(("common", "pointer-input")),
+        "Polar Angle Settings" => Some(("common", "polar-angle-settings")),
+        "Polar Tracking On (F10)" => Some(("common", "polar-tracking-on-f10")),
+        "Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes." => Some(("common", "polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes")),
+        "Press Enter to accept the chamfer or [Distance]:" => Some(("common", "press-enter-to-accept-the-chamfer-or-distance")),
+        "Principal directions" => Some(("common", "principal-directions")),
+        "Principal moments" => Some(("common", "principal-moments")),
+        "Priority" => Some(("common", "priority")),
+        "Product of inertia" => Some(("common", "product-of-inertia")),
+        "REVERSE  Select line, polyline, spline or helix to reverse:" => Some(("common", "reverse-select-line-polyline-spline-or-helix-to-reverse")),
+        "Radii of gyration" => Some(("common", "radii-of-gyration")),
+        "Range" => Some(("common", "range")),
+        "Recent Colors" => Some(("common", "recent-colors")),
+        "Reference changes are not available on web — the reference list is read-only." => Some(("common", "reference-changes-are-not-available-on-web-the-reference-list-is-read-only")),
+        "Refine data" => Some(("common", "refine-data")),
+        "Relative path" => Some(("common", "relative-path")),
+        "Remaining degrees of freedom in the current parametric constraint scope" => Some(("common", "remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope")),
+        "Requires an integer between 0 and 99." => Some(("common", "requires-an-integer-between-0-and-99")),
+        "Requires numeric distance or two points." => Some(("common", "requires-numeric-distance-or-two-points")),
+        "SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:" => Some(("common", "sectionplane-align-section-to-front-back-top-bottom-left-right-top")),
+        "SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:" => Some(("common", "sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane")),
+        "SECTIONPLANE  Specify next point or ENTER to complete:" => Some(("common", "sectionplane-specify-next-point-or-enter-to-complete")),
+        "SECTIONPLANE  Specify next point:" => Some(("common", "sectionplane-specify-next-point")),
+        "SECTIONPLANE  Specify point in direction of section view:" => Some(("common", "sectionplane-specify-point-in-direction-of-section-view")),
+        "SECTIONPLANE  Specify start point:" => Some(("common", "sectionplane-specify-start-point")),
+        "SECTIONPLANE  Specify through point:" => Some(("common", "sectionplane-specify-through-point")),
+        "SETBYLAYER: no properties required changes." => Some(("common", "setbylayer-no-properties-required-changes")),
+        "SETBYLAYER: reset {} entity/entities to ByLayer." => Some(("common", "setbylayer-reset-entity-entities-to-bylayer")),
+        "SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)" => Some(("common", "setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only")),
+        "SHELL supports rectangular boxes, circular cylinders, and spheres." => Some(("common", "shell-supports-rectangular-boxes-circular-cylinders-and-spheres")),
+        "SHELL: solid updated." => Some(("common", "shell-solid-updated")),
+        "SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-add-delete-move-purge-tangents-exit-exit")),
+        "SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-add-delete-move-purge-exit-exit")),
+        "SPLINEDIT  Select any open curves to join to source:" => Some(("common", "splinedit-select-any-open-curves-to-join-to-source")),
+        "SPLINEDIT  Specify a point on the spline <exit>:" => Some(("common", "splinedit-specify-a-point-on-the-spline-exit")),
+        "SPLINEDIT  Specify control vertex to delete:" => Some(("common", "splinedit-specify-control-vertex-to-delete")),
+        "SPLINEDIT  Specify control vertex:" => Some(("common", "splinedit-specify-control-vertex")),
+        "SPLINEDIT  Specify end tangent or [System default]:" => Some(("common", "splinedit-specify-end-tangent-or-system-default")),
+        "SPLINEDIT  Specify existing fit point on spline <exit>:" => Some(("common", "splinedit-specify-existing-fit-point-on-spline-exit")),
+        "SPLINEDIT  Specify new fit point to add <exit>:" => Some(("common", "splinedit-specify-new-fit-point-to-add-exit")),
+        "SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:" => Some(("common", "splinedit-specify-new-location-or-next-previous-select-point-exit-next")),
+        "SPLINEDIT  Specify new point or [After/Before] <exit>:" => Some(("common", "splinedit-specify-new-point-or-after-before-exit")),
+        "SPLINEDIT  Specify precision 0-99 <10> (straight segments):" => Some(("common", "splinedit-specify-precision-0-99-10-straight-segments")),
+        "SPLINEDIT  Specify start tangent or [System default]:" => Some(("common", "splinedit-specify-start-tangent-or-system-default")),
+        "SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:" => Some(("common", "splinedit-add-delete-elevate-order-move-weight-exit-exit")),
+        "SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
+        "SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
+        "SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
+        "SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
+        "SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:" => Some(("common", "subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes")),
+        "SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:" => Some(("common", "subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter")),
+        "SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:" => Some(("common", "subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter")),
+        "SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed." => Some(("common", "subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed")),
+        "SUBTRACT: created %{count} result object(s)." => Some(("common", "subtract-created-result-object-s")),
+        "SUBTRACT: no compatible base and cutter types or planes were selected." => Some(("common", "subtract-no-compatible-base-and-cutter-types-or-planes-were-selected")),
+        "SUBTRACT: select at least one base and one cutter Solid, Region, or Surface." => Some(("common", "subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface")),
+        "SUBTRACT: the retained base object could not be updated." => Some(("common", "subtract-the-retained-base-object-could-not-be-updated")),
+        "SUBTRACT: the selected coincident geometry is ambiguous." => Some(("common", "subtract-the-selected-coincident-geometry-is-ambiguous")),
+        "SUBTRACT: the selected geometry includes an unsupported surface intersection." => Some(("common", "subtract-the-selected-geometry-includes-an-unsupported-surface-intersection")),
+        "SUBTRACT: the selected topology could not be cut safely." => Some(("common", "subtract-the-selected-topology-could-not-be-cut-safely")),
+        "Second row" => Some(("common", "second-row")),
+        "Section Plane" => Some(("common", "section-plane")),
+        "Section Plane Offset" => Some(("common", "section-plane-offset")),
+        "Select a 3D solid or surface edge." => Some(("common", "select-a-3d-solid-or-surface-edge")),
+        "Select a 3D solid." => Some(("common", "select-a-3d-solid")),
+        "Select a 3D solid:" => Some(("common", "select-a-3d-solid-2")),
+        "Select a data link or create a new one." => Some(("common", "select-a-data-link-or-create-a-new-one")),
+        "Select an edge or [Loop/Distance]:" => Some(("common", "select-an-edge-or-loop-distance")),
+        "Select edge of loop or [Edge/Distance]:" => Some(("common", "select-edge-of-loop-or-edge-distance")),
+        "Select face or any point to locate section line or [Draw section/Orthographic/Type]:" => Some(("common", "select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type")),
+        "Select faces to add [Undo/Remove/ALL] <done>:" => Some(("common", "select-faces-to-add-undo-remove-all-done")),
+        "Select faces to remove [Undo/Add/ALL] <done>:" => Some(("common", "select-faces-to-remove-undo-add-all-done")),
+        "Select objects in the current drawing" => Some(("common", "select-objects-in-the-current-drawing")),
+        "Select properties" => Some(("common", "select-properties")),
+        "Select spline-fit polylines:" => Some(("common", "select-spline-fit-polylines")),
+        "Select surfaces to thicken:" => Some(("common", "select-surfaces-to-thicken")),
+        "Selected objects in current drawing" => Some(("common", "selected-objects-in-current-drawing")),
+        "Set cell styles" => Some(("common", "set-cell-styles")),
+        "Sheet" => Some(("common", "sheet")),
+        "Show associativity" => Some(("common", "show-associativity")),
+        "Show command prompting and command input near crosshairs" => Some(("common", "show-command-prompting-and-command-input-near-crosshairs")),
+        "Show count column" => Some(("common", "show-count-column")),
+        "Show cycling badge when objects overlap" => Some(("common", "show-cycling-badge-when-objects-overlap")),
+        "Show name column" => Some(("common", "show-name-column")),
+        "Show values and parameter names on constraint markers" => Some(("common", "show-values-and-parameter-names-on-constraint-markers")),
+        "Slice" => Some(("common", "slice")),
+        "Slice Depth" => Some(("common", "slice-depth")),
+        "Snap On (F9)" => Some(("common", "snap-on-f9")),
+        "Snap X spacing:" => Some(("common", "snap-x-spacing")),
+        "Snap Y spacing:" => Some(("common", "snap-y-spacing")),
+        "Snap spacing" => Some(("common", "snap-spacing")),
+        "Snap type" => Some(("common", "snap-type")),
+        "Specify Distance1 or [Expression] <{:.4}>:" => Some(("common", "specify-distance1-or-expression")),
+        "Specify Distance2 or [Expression] <{:.4}>:" => Some(("common", "specify-distance2-or-expression")),
+        "Specify insertion point" => Some(("common", "specify-insertion-point")),
+        "Specify point or enter arc length:" => Some(("common", "specify-point-or-enter-arc-length")),
+        "Specify point or enter radius:" => Some(("common", "specify-point-or-enter-radius")),
+        "Specify replacement path: XREF Path Find <old> <new>" => Some(("common", "specify-replacement-path-xref-path-find-old-new")),
+        "Specify second point:" => Some(("common", "specify-second-point")),
+        "Specify the shell offset distance <{:.3}>:" => Some(("common", "specify-the-shell-offset-distance")),
+        "Specify thickness" => Some(("common", "specify-thickness")),
+        "Specify window" => Some(("common", "specify-window")),
+        "Spline cannot be converted within the requested precision." => Some(("common", "spline-cannot-be-converted-within-the-requested-precision")),
+        "Spreadsheet Links" => Some(("common", "spreadsheet-links")),
+        "Start from data extraction" => Some(("common", "start-from-data-extraction")),
+        "Start from data link" => Some(("common", "start-from-data-link")),
+        "Start from empty table" => Some(("common", "start-from-empty-table")),
+        "State2" => Some(("common", "state2")),
+        "Static quadrant location" => Some(("common", "static-quadrant-location")),
+        "Status: Linked" => Some(("common", "status-linked")),
+        "Status: Source not found" => Some(("common", "status-source-not-found")),
+        "Surface Associativity" => Some(("common", "surface-associativity")),
+        "Surface Type" => Some(("common", "surface-type-2")),
+        "THICKEN: created {} solid(s); {} surface(s) could not be thickened exactly." => Some(("common", "thicken-created-solid-s-surface-s-could-not-be-thickened-exactly")),
+        "Tab-separated text" => Some(("common", "tab-separated-text")),
+        "Tangent objects must share an intersection point" => Some(("common", "tangent-objects-must-share-an-intersection-point")),
+        "Tangent point must differ from the fit endpoint." => Some(("common", "tangent-point-must-differ-from-the-fit-endpoint")),
+        "The INTERSECT result could not be displayed completely. The original objects were retained." => Some(("common", "the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained")),
+        "The INTERSECT result could not be encoded as ACIS." => Some(("common", "the-intersect-result-could-not-be-encoded-as-acis")),
+        "The SUBTRACT result could not be displayed completely. The original objects were retained." => Some(("common", "the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained")),
+        "The SUBTRACT result could not be encoded as ACIS." => Some(("common", "the-subtract-result-could-not-be-encoded-as-acis")),
+        "The UNION result could not be encoded as ACIS." => Some(("common", "the-union-result-could-not-be-encoded-as-acis")),
+        "The chamfer history could not be recorded." => Some(("common", "the-chamfer-history-could-not-be-recorded")),
+        "The edge body could not be updated." => Some(("common", "the-edge-body-could-not-be-updated")),
+        "The edge body history could not be created." => Some(("common", "the-edge-body-history-could-not-be-created")),
+        "The offset removes all material. Use a smaller distance or add a face back." => Some(("common", "the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back")),
+        "The region could not be encoded as ACIS." => Some(("common", "the-region-could-not-be-encoded-as-acis")),
+        "The result could not be displayed completely. The original edge body was retained." => Some(("common", "the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained")),
+        "The selected base face no longer belongs to the body." => Some(("common", "the-selected-base-face-no-longer-belongs-to-the-body")),
+        "The selected drawing data is ready to be extracted." => Some(("common", "the-selected-drawing-data-is-ready-to-be-extracted")),
+        "The selected object is no longer available." => Some(("common", "the-selected-object-is-no-longer-available")),
+        "The shell could not be constructed from the selected solid and distance." => Some(("common", "the-shell-could-not-be-constructed-from-the-selected-solid-and-distance")),
+        "The shell offset distance must be nonzero." => Some(("common", "the-shell-offset-distance-must-be-nonzero")),
+        "Trimmed surface" => Some(("common", "trimmed-surface")),
+        "Trimming edges" => Some(("common", "trimming-edges")),
+        "Trims" => Some(("common", "trims")),
+        "Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits." => Some(("common", "type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits")),
+        "U isolines" => Some(("common", "u-isolines-2")),
+        "UNION: created %{count} result object(s)." => Some(("common", "union-created-result-object-s")),
+        "UNION: select at least two solids, Regions, or planar Surfaces of the same type." => Some(("common", "union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type")),
+        "UNION: the selected coincident geometry is ambiguous." => Some(("common", "union-the-selected-coincident-geometry-is-ambiguous")),
+        "UNION: the selected geometry includes an unsupported surface intersection." => Some(("common", "union-the-selected-geometry-includes-an-unsupported-surface-intersection")),
+        "UNION: the selected topology could not be closed safely." => Some(("common", "union-the-selected-topology-could-not-be-closed-safely")),
+        "Use a previous extraction as a template" => Some(("common", "use-a-previous-extraction-as-a-template")),
+        "Use source formatting" => Some(("common", "use-source-formatting")),
+        "Used by" => Some(("common", "used-by")),
+        "V isolines" => Some(("common", "v-isolines-2")),
+        "Value must be nonzero." => Some(("common", "value-must-be-nonzero")),
+        "Viewing Direction" => Some(("common", "viewing-direction")),
+        "WIPEOUT  Specify next point or [Close/Undo]:" => Some(("common", "wipeout-specify-next-point-or-close-undo")),
+        "WIPEOUT  Specify next point or [Undo]:" => Some(("common", "wipeout-specify-next-point-or-undo")),
+        "WIPEOUT  Specify next point:" => Some(("common", "wipeout-specify-next-point")),
+        "Wireframe type" => Some(("common", "wireframe-type")),
+        "XATTACH" => Some(("insert", "xattach")),
+        "XATTACH  Specify rotation angle <0>:" => Some(("insert", "xattach-specify-rotation-angle-0")),
+        "XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):" => Some(("insert", "xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner")),
+        "XOPEN: opening \"{}\"." => Some(("insert", "xopen-opening")),
+        "XREF: {e}" => Some(("insert", "xref")),
+        "_mtp Specify first point of mid:" => Some(("common", "mtp-specify-first-point-of-mid")),
+        "_mtp Specify second point of mid:" => Some(("common", "mtp-specify-second-point-of-mid")),
+        "formula" => Some(("common", "formula-2")),
+        "name" => Some(("common", "name")),
+        "{command}: aligned {} object(s)." => Some(("common", "aligned-object-s")),
+        "{}  Select annotative objects:" => Some(("common", "select-annotative-objects")),
+        "{} parameter(s) applied." => Some(("common", "parameter-s-applied")),
+        "{} row(s) skipped: duplicate parameter name." => Some(("common", "row-s-skipped-duplicate-parameter-name")),
+        "{} surface(s) cannot be thickened because the offset intersects itself." => Some(("common", "surface-s-cannot-be-thickened-because-the-offset-intersects-itself")),
+        "⚠ {parametric_conflicts} conflicting" => Some(("common", "conflicting")),
         _ => None,
     }
 }