feat(view): DVIEW twists the view about its line of sight

DVIEW (alias DV) offers TWist and Undo. TWist rolls the active view
or viewport camera to the typed angle; Undo steps back through the
twists made in the session. The new alias reaches existing profiles
through the alias migration table.

Refs #638

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -4459,6 +4459,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <layer> = تجميد | T <layer> = إلغاء التجميد | Enter = خروج
 
 view =
+    .twist-option = لف
+    .dview-specify-view-twist-angle = DVIEW  حدد زاوية لف العرض <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  أدخل خيارًا [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = تم تعيين نظام الألوان على "النظام" (حاليًا __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = يتطلب عددًا صحيحًا بين __ocs_fmt_0__ و __ocs_fmt_1__.

locales/bg-BG/opencadstudio.ftl

@@ -4446,6 +4446,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <слой> = Замрази  |  T <слой> = Размрази  |  Enter = Изход
 
 view =
+    .twist-option = Завъртане
+    .dview-specify-view-twist-angle = DVIEW  Задайте ъгъл на завъртане на изгледа <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Въведете опция [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Цветовата схема е зададена на „Системна“ (в момента __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Изисква се цяло число между __ocs_fmt_0__ и __ocs_fmt_1__.

locales/cs-CZ/opencadstudio.ftl

@@ -4444,6 +4444,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Zmrazit | T <layer> = Rozmrazit | Enter = Konec
 
 view =
+    .twist-option = Natočení
+    .dview-specify-view-twist-angle = DVIEW  Zadejte úhel natočení pohledu <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Zadejte možnost [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Barevné schéma nastaveno na „Systém“ (aktuálně __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Vyžaduje celé číslo mezi __ocs_fmt_0__ a __ocs_fmt_1__.

locales/de-DE/opencadstudio.ftl

@@ -4445,6 +4445,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <Ebene> = Einfrieren | T <Ebene> = Auftauen | Eingabe = Beenden
 
 view =
+    .twist-option = Verdrehen
+    .dview-specify-view-twist-angle = DVIEW  Ansichtsverdrehwinkel angeben <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Option eingeben [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Farbschema auf „System“ eingestellt (derzeit __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Erfordert eine ganze Zahl zwischen __ocs_fmt_0__ und __ocs_fmt_1__.

locales/el-GR/opencadstudio.ftl

@@ -4447,6 +4447,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <επίπεδο> = Πάγωμα  |  T <επίπεδο> = Ξεπάγωμα  |  Enter = Έξοδος
 
 view =
+    .twist-option = Στρέψη
+    .dview-specify-view-twist-angle = DVIEW  Καθορίστε γωνία στρέψης όψης <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Εισαγάγετε επιλογή [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Ο χρωματικός συνδυασμός ρυθμίστηκε σε „Σύστημα“ (αυτή τη στιγμή __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Απαιτείται ακέραιος αριθμός μεταξύ __ocs_fmt_0__ και __ocs_fmt_1__.

locales/en-US/opencadstudio.ftl

@@ -4446,6 +4446,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <layer> = Freeze  |  T <layer> = Thaw  |  Enter = Exit
 
 view =
+    .twist-option = TWist
+    .dview-specify-view-twist-angle = DVIEW  Specify view twist angle <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Enter option [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Color scheme set to 'System' (currently __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Requires an integer between __ocs_fmt_0__ and __ocs_fmt_1__.

locales/es-ES/opencadstudio.ftl

@@ -4447,6 +4447,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <capa> = Inutilizar | T <capa> = Reutilizar | Intro = Salir
 
 view =
+    .twist-option = Girar
+    .dview-specify-view-twist-angle = DVIEW  Precise el ángulo de giro de la vista <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Indique una opción [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Esquema de color establecido en «Sistema» (actualmente __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Requiere un número entero entre __ocs_fmt_0__ y __ocs_fmt_1__.

locales/fi-FI/opencadstudio.ftl

@@ -4446,6 +4446,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Jäädytys | T <layer> = Sulatus | Enter = Poistu
 
 view =
+    .twist-option = Kierto
+    .dview-specify-view-twist-angle = DVIEW  Määritä näkymän kiertokulma <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Anna valinta [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Väriteema asetettu arvoon "Järjestelmä" (tällä hetkellä __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Vaatii kokonaisluvun väliltä __ocs_fmt_0__–__ocs_fmt_1__.

locales/fr-FR/opencadstudio.ftl

@@ -4448,6 +4448,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Freeze , T <layer> = Thaw , Entrée = Sortie
 
 view =
+    .twist-option = Rotation
+    .dview-specify-view-twist-angle = DVIEW  Spécifiez l’angle de rotation de la vue <__ocs_fmt_0__> :
+    .dview-enter-option-twist-undo = DVIEW  Entrez une option [TWist/Undo] :
     .color-scheme-set-to-system-currently-name = Jeu de couleurs défini sur « Système » (actuellement __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Nécessite un nombre entier compris entre __ocs_fmt_0__ et __ocs_fmt_1__.

locales/hi-IN/opencadstudio.ftl

@@ -4435,6 +4435,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <लेयर> = फ़्रीज़ | T <लेयर> = थॉ | Enter = बाहर निकलें
 
 view =
+    .twist-option = घुमाव
+    .dview-specify-view-twist-angle = DVIEW  दृश्य घुमाव कोण निर्दिष्ट करें <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  विकल्प दर्ज करें [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = रंग योजना 'सिस्टम' पर सेट की गई (वर्तमान में __ocs_fmt_0__)।
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = __ocs_fmt_0__ और __ocs_fmt_1__ के बीच एक पूर्णांक आवश्यक है।

locales/hu-HU/opencadstudio.ftl

@@ -4444,6 +4444,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Fagyasztás | T <layer> = Felengedés | Enter = Kilépés
 
 view =
+    .twist-option = Elforgatás
+    .dview-specify-view-twist-angle = DVIEW  Adja meg a nézet elforgatási szögét <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Adja meg a lehetőséget [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Színséma beállítva: „Rendszer” (jelenleg __ocs_fmt_0__).
     .ss-create-sheet-set = Tervlapkészlet létrehozása
     .ss-requires-integer-between = __ocs_fmt_0__ és __ocs_fmt_1__ közötti egész szám szükséges.

locales/it-IT/opencadstudio.ftl

@@ -4446,6 +4446,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Congela | T <layer> = Scongela | Enter = Esci
 
 view =
+    .twist-option = Rotazione
+    .dview-specify-view-twist-angle = DVIEW  Specificare l'angolo di rotazione della vista <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Immettere un'opzione [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Combinazione colori impostata su "Sistema" (attualmente __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Richiede un numero intero compreso tra __ocs_fmt_0__ e __ocs_fmt_1__.

locales/ja-JP/opencadstudio.ftl

@@ -4435,6 +4435,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <layer> = フリーズ  |  T <layer> = フリーズ解除  |  Enter = 終了
 
 view =
+    .twist-option = ねじれ
+    .dview-specify-view-twist-angle = DVIEW  ビューのねじれ角度を指定 <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  オプションを入力 [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = カラースキームを「システム」に設定しました（現在: __ocs_fmt_0__）。
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = __ocs_fmt_0__ から __ocs_fmt_1__ までの整数が必要です。

locales/ko-KR/opencadstudio.ftl

@@ -4446,6 +4446,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = 동결 | T <layer> = 해동 | Enter = 종료
 
 view =
+    .twist-option = 비틀기
+    .dview-specify-view-twist-angle = DVIEW  뷰 비틀기 각도 지정 <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  옵션 입력 [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = 색 구성표가 '시스템'으로 설정되었습니다(현재 __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = __ocs_fmt_0__에서 __ocs_fmt_1__ 사이의 정수가 필요합니다.

locales/lo-LA/opencadstudio.ftl

@@ -4447,6 +4447,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <ເລເຢີ> = ແຊ່ແຂງ  |  T <ເລເຢີ> = ລະລາຍ  |  Enter = ອອກ
 
 view =
+    .twist-option = ບິດ
+    .dview-specify-view-twist-angle = DVIEW  ກຳນົດມຸມບິດມຸມມອງ <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  ໃສ່ຕົວເລືອກ [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = ຕັ້ງຮູບແບບສີເປັນ 'ລະບົບ' ແລ້ວ (ປັດຈຸບັນ __ocs_fmt_0__).
     .ss-create-sheet-set = ສ້າງຊຸດແຜ່ນງານ
     .ss-requires-integer-between = ຕ້ອງການຈໍານວນຖ້ວນລະຫວ່າງ __ocs_fmt_0__ ຫາ __ocs_fmt_1__.

locales/nl-NL/opencadstudio.ftl

@@ -4445,6 +4445,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <laag> = Bevriezen | T <laag> = Ontdooien | Enter = Afsluiten
 
 view =
+    .twist-option = Draaien
+    .dview-specify-view-twist-angle = DVIEW  Geef weergavedraaihoek op <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Geef optie op [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Kleurenschema ingesteld op 'Systeem' (momenteel __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Vereist een geheel getal tussen __ocs_fmt_0__ en __ocs_fmt_1__.

locales/pl-PL/opencadstudio.ftl

@@ -4446,6 +4446,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Zamrożenie | T <layer> = Odwilż | Enter = Wyjście
 
 view =
+    .twist-option = Skręcenie
+    .dview-specify-view-twist-angle = DVIEW  Określ kąt skręcenia widoku <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Podaj opcję [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Schemat kolorów ustawiono na „System” (obecnie __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Wymagana liczba całkowita z zakresu od __ocs_fmt_0__ do __ocs_fmt_1__.

locales/pt-BR/opencadstudio.ftl

@@ -4447,6 +4447,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <camada> = Congelar | T <camada> = Descongelar | Enter = Sair
 
 view =
+    .twist-option = Girar
+    .dview-specify-view-twist-angle = DVIEW  Especifique o ângulo de giro da vista <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Informe uma opção [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Esquema de cores definido como "Sistema" (atualmente __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Requer um número inteiro entre __ocs_fmt_0__ e __ocs_fmt_1__.

locales/ru-RU/opencadstudio.ftl

@@ -4448,6 +4448,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <слой> = заморозить | T <слой> = разморозить | Enter = выход
 
 view =
+    .twist-option = Поворот
+    .dview-specify-view-twist-angle = DVIEW  Укажите угол поворота вида <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Задайте параметр [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Цветовая схема установлена на «Системную» (сейчас __ocs_fmt_0__).
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = Требуется целое число от __ocs_fmt_0__ до __ocs_fmt_1__.

locales/tr-TR/opencadstudio.ftl

@@ -4405,6 +4405,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <layer> = Dondur | T <layer> = Çöz | Enter = Çık
 
 view =
+    .twist-option = Döndür
+    .dview-specify-view-twist-angle = DVIEW  Görünüm döndürme açısını belirtin <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  Seçenek girin [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = Renk düzeni 'Sistem' olarak ayarlandı (şu anda __ocs_fmt_0__).
     .ss-create-sheet-set = Sayfa Kümesi Oluştur
     .ss-requires-integer-between = __ocs_fmt_0__ ile __ocs_fmt_1__ arasında bir tam sayı gerekir.

locales/zh-CN/opencadstudio.ftl

@@ -4430,6 +4430,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <图层> = 冻结  |  T <图层> = 解冻  |  Enter = 退出
 
 view =
+    .twist-option = 扭曲
+    .dview-specify-view-twist-angle = DVIEW  指定视图扭曲角度 <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  输入选项 [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = 颜色方案已设为“系统”（当前：__ocs_fmt_0__）。
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = 需要介于 __ocs_fmt_0__ 和 __ocs_fmt_1__ 之间的整数。

locales/zh-TW/opencadstudio.ftl

@@ -4442,6 +4442,9 @@ layout =
     .vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER  F <圖層> = 凍結  |  T <圖層> = 解凍  |  Enter = 退出
 
 view =
+    .twist-option = 扭轉
+    .dview-specify-view-twist-angle = DVIEW  指定視圖扭轉角度 <__ocs_fmt_0__>:
+    .dview-enter-option-twist-undo = DVIEW  輸入選項 [TWist/Undo]:
     .color-scheme-set-to-system-currently-name = 配色方案已設為「系統」（目前：__ocs_fmt_0__）。
     .ss-create-sheet-set = Create Sheet Set
     .ss-requires-integer-between = 需要介於 __ocs_fmt_0__ 和 __ocs_fmt_1__ 之間的整數。