feat(offset): open on the live preview for pre-selected objects; signed typed distance

With objects already selected, OFFSET opens at the side step with the
preview following the cursor instead of asking for a distance first
(#422). At the side step a typed distance places the offset at once on
the cursor's side, and a negative one on the other side; Enter at the
start repeats the last distance (#418). Erase and Layer, which lived on
the skipped distance step, are offered there too. With nothing selected
the distance-first flow is unchanged.

The opposite side is found by mirroring the cursor through its nearest
point on the outline, capped at half the offset distance so it cannot
cross a narrow gap back to the cursor's own side. Two new prompts are
added to the catalog and every locale.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -3035,6 +3035,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  انقر نقطة العبور أو [متعدد]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ متعدد  انقر الجانب التالي [المسافة __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ متعدد  انقر نقطة العبور التالية:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  انقر نقطة العبور أو اكتب المسافة، والقيمة السالبة للجهة الأخرى [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ متعدد  انقر نقطة العبور أو اكتب المسافة، والقيمة السالبة للجهة الأخرى [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = إزاحة (DIMEXO)
     .overall-scale-dimscale = المقياس الإجمالي (DIMSCALE)
     .pedit-enter-option = PEDIT  أدخل الخيار:

locales/bg-BG/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  Кликни точка на преминаване или [Многократно]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Многократно  Кликни следваща страна [разстояние __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Многократно  Кликни следваща точка на преминаване:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Кликни точка на преминаване или въведи разстояние, отрицателно за другата страна [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Многократно  Кликни точка на преминаване или въведи разстояние, отрицателно за другата страна [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Отместване (DIMEXO)
     .overall-scale-dimscale = Общ мащаб (DIMSCALE)
     .pedit-enter-option = PEDIT  Въведи опция:

locales/cs-CZ/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Bod prokliku nebo [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Vícenásobné kliknutí na další stranu [vzdálenost __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Vícenásobné kliknutí dalším průchozím bodem:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Klikněte na průchozí bod nebo zadejte vzdálenost, zápornou pro druhou stranu [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Vícenásobně  Klikněte na průchozí bod nebo zadejte vzdálenost, zápornou pro druhou stranu [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Odsazení (DIMEXO)
     .overall-scale-dimscale = Celková stupnice (DIMSCALE)
     .pedit-enter-option = Možnost PEDIT Enter:

locales/de-DE/opencadstudio.ftl

@@ -3023,6 +3023,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Klicken Sie durch Punkt oder [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Mehrfachklicken Sie auf die nächste Seite [Abstand __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Mehrfachklicken Sie als nächstes durch den Punkt:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Durch Punkt klicken oder Abstand eingeben, negativ für die andere Seite [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Mehrfach  Durch Punkt klicken oder Abstand eingeben, negativ für die andere Seite [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Abstand der Maßhilfslinie (DIMEXO)
     .overall-scale-dimscale = Gesamtmaßstab (DIMSCALE)
     .pedit-enter-option = PEDIT Option eingeben:

locales/el-GR/opencadstudio.ftl

@@ -3023,6 +3023,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  Κάντε κλικ σε σημείο διέλευσης ή [Πολλαπλά]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Πολλαπλά  Κάντε κλικ στην επόμενη πλευρά [απόσταση __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Πολλαπλά  Κάντε κλικ στο επόμενο σημείο διέλευσης:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Κάντε κλικ σε σημείο διέλευσης ή πληκτρολογήστε απόσταση, αρνητική για την άλλη πλευρά [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Πολλαπλά  Κάντε κλικ σε σημείο διέλευσης ή πληκτρολογήστε απόσταση, αρνητική για την άλλη πλευρά [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Μετατόπιση (DIMEXO)
     .overall-scale-dimscale = Συνολική κλίμακα (DIMSCALE)
     .pedit-enter-option = PEDIT  Δώστε επιλογή:

locales/en-US/opencadstudio.ftl

@@ -3024,6 +3024,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  Click through point or [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Multiple  Click next side [distance __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Multiple  Click next through point:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Click through point or type distance, negative for the other side [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Multiple  Click through point or type distance, negative for the other side [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Offset (DIMEXO)
     .overall-scale-dimscale = Overall scale (DIMSCALE)
     .pedit-enter-option = PEDIT  Enter option:

locales/es-ES/opencadstudio.ftl

@@ -3023,6 +3023,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  Pulse el punto de paso o [Múltiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Múltiple  Pulse el siguiente lado [distancia __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Múltiple  Pulse el siguiente punto de paso:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Pulse el punto de paso o escriba la distancia, negativa para el otro lado [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Múltiple  Pulse el punto de paso o escriba la distancia, negativa para el otro lado [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Desfase (DIMEXO)
     .overall-scale-dimscale = Escala general (DIMSCALE)
     .pedit-enter-option = PEDIT  Indique una opción:

locales/fi-FI/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Napsautuskohta tai [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Useita Napsauta seuraavaa reunaa [etäisyys __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Useita napsauttamalla seuraava kohta:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Napsauta läpikulkupistettä tai kirjoita etäisyys, negatiivinen toiselle puolelle [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Useita  Napsauta läpikulkupistettä tai kirjoita etäisyys, negatiivinen toiselle puolelle [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Siirtymä (DIMEXO)
     .overall-scale-dimscale = Kokonaismittakaava (DIMSCALE)
     .pedit-enter-option = PEDIT Enter vaihtoehto:

locales/fr-FR/opencadstudio.ftl

@@ -3023,6 +3023,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Cliquez sur le point ou [multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Cliquer sur le côté suivant [distance __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Cliquez sur plusieurs ci-dessous pour accéder au point suivant:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Cliquez sur le point de passage ou saisissez la distance, négative pour l'autre côté [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Multiple  Cliquez sur le point de passage ou saisissez la distance, négative pour l'autre côté [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Décomposition (DIMEXO)
     .overall-scale-dimscale = Échelle globale (DIMSCALE)
     .pedit-enter-option = PEDIT Saisissez l'option :

locales/hi-IN/opencadstudio.ftl

@@ -3011,6 +3011,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ बिंदु के माध्यम से क्लिक करें या [एकाधिक]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ अगली दिशा की ओर क्लिक करें [दूरी __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ एकाधिक बिंदु के माध्यम से आगे क्लिक करें:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  पारगमन बिंदु पर क्लिक करें या दूरी टाइप करें, दूसरी ओर के लिए ऋणात्मक [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ एकाधिक  पारगमन बिंदु पर क्लिक करें या दूरी टाइप करें, दूसरी ओर के लिए ऋणात्मक [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = ऑफसेट (DIMEXO)
     .overall-scale-dimscale = कुल मिलाकर स्केल (DIMSCALE)
     .pedit-enter-option = PEDIT विकल्प दर्ज करें:

locales/hu-HU/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Átkattintási pont vagy [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Több kattintás a következő oldalon [távolság __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Több kattintás a következő ponton:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Kattintson az átmenő pontra, vagy írja be a távolságot, negatívat a másik oldalhoz [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Többszörös  Kattintson az átmenő pontra, vagy írja be a távolságot, negatívat a másik oldalhoz [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Eltolás (DIMEXO)
     .overall-scale-dimscale = Teljes skála (DIMSCALE)
     .pedit-enter-option = PEDIT Enter opció:

locales/it-IT/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Punto di passaggio o [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Clic multiplo sul lato successivo [distanza __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Clic multiplo sul punto successivo:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Fare clic sul punto di passaggio o digitare la distanza, negativa per l'altro lato [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Multiplo  Fare clic sul punto di passaggio o digitare la distanza, negativa per l'altro lato [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Spostamento (DIMEXO)
     .overall-scale-dimscale = Scala totale (DIMSCALE)
     .pedit-enter-option = Opzione PEDIT Enter:

locales/ja-JP/opencadstudio.ftl

@@ -3013,6 +3013,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  通過点をクリックまたは [複数]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ 複数  次の側をクリック [距離 __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ 複数  次の通過点をクリック:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  通過点をクリックまたは距離を入力、負の値で反対側 [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ 複数  通過点をクリックまたは距離を入力、負の値で反対側 [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = オフセット (DIMEXO)
     .overall-scale-dimscale = 全体尺度 (DIMSCALE)
     .pedit-enter-option = PEDIT  オプションを入力:

locales/ko-KR/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ 클릭 통과 점 또는 [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ 다중 다음 측면 클릭 [거리 __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ 다중 클릭 다음 통과 지점:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  통과점을 클릭하거나 거리 입력, 음수는 반대쪽 [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ 다중  통과점을 클릭하거나 거리 입력, 음수는 반대쪽 [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = 오프셋(DIMEXO)
     .overall-scale-dimscale = 전체 규모(DIMSCALE)
     .pedit-enter-option = PEDIT Enter 옵션:

locales/nl-NL/opencadstudio.ftl

@@ -3023,6 +3023,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Klik door punt of [meerdere]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Meerdere klik op volgende zijde [afstand __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Meerdere klik volgende door punt:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Klik door punt of typ afstand, negatief voor de andere kant [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Meerdere  Klik door punt of typ afstand, negatief voor de andere kant [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Verschuiving (DIMEXO)
     .overall-scale-dimscale = Totale schaal (DIMSCALE)
     .pedit-enter-option = PEDIT Voer optie in:

locales/pl-PL/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Punkt przelotowy lub [Multiple]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Wielokrotne kliknięcie następnej strony [odległość __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Wielokrotne kliknięcie następnego punktu przelotowego:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Kliknij punkt przelotowy lub wpisz odległość, ujemną dla drugiej strony [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Wielokrotnie  Kliknij punkt przelotowy lub wpisz odległość, ujemną dla drugiej strony [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Przesunięcie (DIMEXO)
     .overall-scale-dimscale = Skala ogólna (DIMSCALE)
     .pedit-enter-option = Opcja PEDIT Enter:

locales/pt-BR/opencadstudio.ftl

@@ -3023,6 +3023,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  Clique no ponto de passagem ou [Múltiplo]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Múltiplo  Clique no próximo lado [distância __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Múltiplo  Clique no próximo ponto de passagem:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Clique no ponto de passagem ou digite a distância, negativa para o outro lado [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Múltiplo  Clique no ponto de passagem ou digite a distância, negativa para o outro lado [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Deslocamento (DIMEXO)
     .overall-scale-dimscale = Escala geral (DIMSCALE)
     .pedit-enter-option = PEDIT  Insira a opção:

locales/ru-RU/opencadstudio.ftl

@@ -3026,6 +3026,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Нажмите на точку или [Множественное число]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Несколько кликов на следующую сторону [расстояние __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Несколько кликов по следующей точке:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Укажите точку прохождения или введите расстояние, отрицательное для другой стороны [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Несколько  Укажите точку прохождения или введите расстояние, отрицательное для другой стороны [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Отступ от объекта (DIMEXO)
     .overall-scale-dimscale = Общий масштаб (DIMSCALE)
     .pedit-enter-option = PEDIT Введите опцию:

locales/tr-TR/opencadstudio.ftl

@@ -3005,6 +3005,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  Geçiş noktasına tıklayın veya [Birden Çok]:
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Birden Çok  Sonraki tarafa tıklayın [mesafe __ocs_arg_d__]:
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Birden Çok  Sonraki geçiş noktasına tıklayın:
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  Geçiş noktasına tıklayın veya mesafe yazın, diğer taraf için negatif [Multiple/Erase/Layer] <__ocs_arg_d__>:
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Birden Çok  Geçiş noktasına tıklayın veya mesafe yazın, diğer taraf için negatif [Erase/Layer] <__ocs_arg_d__>:
     .offset-dimexo = Ofset (DIMEXO)
     .overall-scale-dimscale = Genel ölçek (DIMSCALE)
     .pedit-enter-option = PEDIT  Seçeneği girin:

locales/zh-CN/opencadstudio.ftl

@@ -3010,6 +3010,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  单击通过点或 [多个]：
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ 多个  单击下一侧 [距离 __ocs_arg_d__]：
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ 多个  单击下一个通过点：
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  单击通过点或输入距离，负值偏移到另一侧 [Multiple/Erase/Layer] <__ocs_arg_d__>：
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ 多个  单击通过点或输入距离，负值偏移到另一侧 [Erase/Layer] <__ocs_arg_d__>：
     .offset-dimexo = 偏移 (DIMEXO)
     .overall-scale-dimscale = 全局比例 (DIMSCALE)
     .pedit-enter-option = PEDIT  输入选项：

locales/zh-TW/opencadstudio.ftl

@@ -3022,6 +3022,8 @@ modify =
     .offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__  按一下通過點或 [多個]：
     .offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ 多個  按一下下一側 [距離 __ocs_arg_d__]：
     .offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ 多個  按一下下一個通過點：
+    .offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__  按一下通過點或輸入距離，負值偏移到另一側 [Multiple/Erase/Layer] <__ocs_arg_d__>：
+    .offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ 多個  按一下通過點或輸入距離，負值偏移到另一側 [Erase/Layer] <__ocs_arg_d__>：
     .offset-dimexo = 偏移 (DIMEXO)
     .overall-scale-dimscale = 全局比例 (DIMSCALE)
     .pedit-enter-option = PEDIT  輸入選項：