1b-agent/OneCAD-Draft
1
0 Fork 0
forked from 1b-agent/opencadstudio-upstream
Code Pull Requests Activity

fix(modify): repair reference transforms

Browse Source 
Refs #609
This commit is contained in:
Hakan Seven committed 2026-08-01 00:13:24 +03:00
1 parent 9382a412df
commit 54124dc252
2 files changed
+221 -104
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

src/modules/draw/modify/rotate.rs
+134 -84
View File
@@ -3,8 +3,11 @@
// Command: ROTATE (RO)
// Requires at least one entity selected before starting.
// Step 1: pick rotation center
// Step 2: pick reference point (defines the 0° direction)
// Step 3: pick destination point → rotates by (dest_angle - ref_angle)
// Step 2: specify a relative rotation angle, or choose Reference
//
// Reference rotation: the reference angle may be typed or measured between
// two points. The new absolute angle is then typed or picked from the center;
// the applied rotation is new-angle - reference-angle.
use acadrust::Handle;
use glam::DVec3;
@@ -29,8 +32,10 @@ pub fn tool() -> ToolDef {
enum Step {
Center,
RefPoint { center: DVec3 },
Angle { center: DVec3, ref_angle: f64 },
Angle { center: DVec3 },
RefFirst { center: DVec3 },
RefSecond { center: DVec3, first: DVec3 },
RefNew { center: DVec3, ref_angle: f64 },
}
pub struct RotateCommand {
@@ -49,6 +54,14 @@ impl RotateCommand {
default_angle: defaults::get_rotate_angle(),
}
}
fn commit(&self, center: DVec3, angle_rad: f64) -> CmdResult {
defaults::set_rotate_angle(angle_rad.to_degrees());
CmdResult::TransformSelected(
self.handles.clone(),
EntityTransform::Rotate { center, angle_rad },
)
}
}
impl CadCommand for RotateCommand {
@@ -62,56 +75,76 @@ impl CadCommand for RotateCommand {
"ROTATE Specify rotation center [{} objects]:",
self.handles.len()
),
Step::RefPoint { .. } => {
"ROTATE Specify reference point (or skip: type angle directly):".into()
Step::Angle { .. } => format!(
"ROTATE Specify rotation angle <{:.4}>:",
self.default_angle
),
Step::RefFirst { .. } => {
"ROTATE Specify first reference point or type reference angle:".into()
}
Step::Angle { ref_angle, .. } => format!(
"ROTATE Specify destination or type angle in degrees <{:.4}> [ref={:.1}°]:",
self.default_angle,
Step::RefSecond { .. } => "ROTATE Specify second reference point:".into(),
Step::RefNew { ref_angle, .. } => format!(
"ROTATE Specify new absolute angle [ref={:.1}°]:",
ref_angle.to_degrees()
),
}
}
fn options(&self) -> Vec<crate::command::CmdOption> {
use crate::command::CmdOption;
match self.step {
Step::Angle { .. } => vec![CmdOption::new("Reference", "R")],
_ => vec![],
}
}
fn on_point(&mut self, pt: DVec3) -> CmdResult {
match &self.step {
Step::Center => {
self.step = Step::RefPoint { center: pt };
self.step = Step::Angle { center: pt };
CmdResult::NeedPoint
}
Step::RefPoint { center } => {
Step::Angle { center } => {
let center = *center;
let ref_angle = (pt.y - center.y).atan2(pt.x - center.x);
self.step = Step::Angle { center, ref_angle };
let direction = pt - center;
if direction.x.hypot(direction.y) <= f64::EPSILON {
return CmdResult::NeedPoint;
}
let angle_rad = direction.y.atan2(direction.x);
self.commit(center, angle_rad)
}
Step::RefFirst { center } => {
let center = *center;
self.step = Step::RefSecond { center, first: pt };
CmdResult::NeedPoint
}
Step::Angle { center, ref_angle } => {
Step::RefSecond { center, first } => {
let direction = pt - *first;
if direction.x.hypot(direction.y) <= f64::EPSILON {
return CmdResult::NeedPoint;
}
let center = *center;
let ref_angle = *ref_angle;
let dest_angle = (pt.y - center.y).atan2(pt.x - center.x);
let delta = dest_angle - ref_angle;
defaults::set_rotate_angle(delta.to_degrees());
self.default_angle = delta.to_degrees();
CmdResult::TransformSelected(
self.handles.clone(),
EntityTransform::Rotate {
center,
angle_rad: delta,
},
)
let ref_angle = direction.y.atan2(direction.x);
self.step = Step::RefNew { center, ref_angle };
CmdResult::NeedPoint
}
Step::RefNew { center, ref_angle } => {
let center = *center;
let direction = pt - center;
if direction.x.hypot(direction.y) <= f64::EPSILON {
return CmdResult::NeedPoint;
}
let new_angle = direction.y.atan2(direction.x);
self.commit(center, new_angle - *ref_angle)
}
}
}
fn on_enter(&mut self) -> CmdResult {
// At Angle step: Enter uses the stored default angle.
if let Step::Angle { center, .. } = &self.step {
// At the normal angle step, Enter uses the stored default angle.
if let Step::Angle { center } = &self.step {
let center = *center;
let angle_rad = self.default_angle.to_radians();
return CmdResult::TransformSelected(
self.handles.clone(),
EntityTransform::Rotate { center, angle_rad },
);
return self.commit(center, self.default_angle.to_radians());
}
CmdResult::Cancel
}
@@ -120,52 +153,67 @@ impl CadCommand for RotateCommand {
}
fn on_text_input(&mut self, text: &str) -> Option<CmdResult> {
// A typed angle rotates directly about the centre. Accept it at the
// reference-point step too (the prompt offers "skip: type angle
// directly") — otherwise typing the angle there did nothing and the
// command cancelled on the next Enter, so the objects never rotated.
let center = match &self.step {
Step::RefPoint { center } => *center,
Step::Angle { center, .. } => *center,
Step::Center => return None,
};
// The value already carries the correct sign (the dynamic-input
// layer applies the cursor's side for a bare magnitude).
let deg: f64 = text.trim().replace(',', ".").parse().ok()?;
defaults::set_rotate_angle(deg);
Some(CmdResult::TransformSelected(
self.handles.clone(),
EntityTransform::Rotate {
center,
angle_rad: deg.to_radians(),
},
))
let t = text.trim();
match &self.step {
Step::Angle { center } => {
let center = *center;
let low = t.to_ascii_lowercase();
if low == "r" || low == "reference" {
self.step = Step::RefFirst { center };
return Some(CmdResult::NeedPoint);
}
// The value already carries the correct sign when it comes
// from dynamic input.
let deg: f64 = t.replace(',', ".").parse().ok()?;
Some(self.commit(center, deg.to_radians()))
}
Step::RefFirst { center } => {
let center = *center;
let ref_deg: f64 = t.replace(',', ".").parse().ok()?;
self.step = Step::RefNew {
center,
ref_angle: ref_deg.to_radians(),
};
Some(CmdResult::NeedPoint)
}
Step::RefNew { center, ref_angle } => {
let (center, ref_angle) = (*center, *ref_angle);
let new_deg: f64 = t.replace(',', ".").parse().ok()?;
Some(self.commit(center, new_deg.to_radians() - ref_angle))
}
Step::Center | Step::RefSecond { .. } => None,
}
}
fn on_preview_wires(&mut self, pt: DVec3) -> Vec<WireModel> {
let (center, ref_angle) = match &self.step {
Step::Angle { center, ref_angle } => (*center, *ref_angle),
Step::RefPoint { center } => {
// Show a reference line from center to cursor only.
let (center, angle_rad) = match &self.step {
Step::Angle { center } => {
let direction = pt - *center;
if direction.x.hypot(direction.y) <= f64::EPSILON {
return vec![];
}
(*center, direction.y.atan2(direction.x))
}
Step::RefSecond { first, .. } => {
return vec![WireModel::solid(
"rubber_band".into(),
vec![
[center.x as f32, center.y as f32, center.z as f32],
[first.x as f32, first.y as f32, first.z as f32],
[pt.x as f32, pt.y as f32, pt.z as f32],
],
WireModel::CYAN,
false,
)];
}
Step::RefNew { center, ref_angle } => {
let direction = pt - *center;
if direction.x.hypot(direction.y) <= f64::EPSILON {
return vec![];
}
(*center, direction.y.atan2(direction.x) - *ref_angle)
}
_ => return vec![],
};
let dest_angle = (pt.y - center.y).atan2(pt.x - center.x);
let angle_rad = dest_angle - ref_angle;
// Track the live SIGNED rotation (relative to the reference) so that
// committing with Enter rotates the way the cursor is dragging — the
// dynamic-input box shows the unsigned magnitude, but the committed
// value must keep its direction (clockwise = negative).
self.default_angle = angle_rad.to_degrees();
// Object ghosts rotated to the new angle. The rotation sweep arc is
// drawn by the dynamic-input overlay (polar guide), not here.
self.wire_models
@@ -176,41 +224,43 @@ impl CadCommand for RotateCommand {
fn dyn_field(&self) -> DynField {
match self.step {
Step::Angle { .. } => DynField::Angle,
Step::Angle { .. } | Step::RefNew { .. } => DynField::Angle,
Step::RefFirst { .. } => DynField::Scalar,
_ => DynField::Point,
}
}
fn dyn_spec(&self) -> Option<crate::command::DynSpec> {
use crate::command::{DynAnchor, DynFieldSpec, DynGuide, DynRole, DynSpec};
// Rotation angle is measured about the CENTRE, swept from the reference
// direction. The polar guide arc is anchored at the centre and starts
// at the reference (via ref_point), with the value box centred on it.
if let Step::Angle { center, ref_angle } = self.step {
let ref_dir = DVec3::new(center.x + ref_angle.cos(), center.y + ref_angle.sin(), center.z);
Some(DynSpec {
// Both normal rotation and Reference's new angle are absolute cursor
// directions from the center. Reference mode subtracts its stored
// reference angle only when previewing or committing the transform.
match self.step {
Step::Angle { center } | Step::RefNew { center, .. } => Some(DynSpec {
anchor: DynAnchor::Point(center),
fields: vec![DynFieldSpec::new(DynRole::Angle)],
guide: DynGuide::Polar,
ref_point: Some(ref_dir),
})
} else {
None
ref_point: Some(center + DVec3::X),
}),
_ => None,
}
}
fn dyn_commit_as_text(&self) -> bool {
matches!(self.step, Step::Angle { .. })
matches!(self.step, Step::Angle { .. } | Step::RefFirst { .. })
}
fn dyn_live_value(&self, cursor: DVec3) -> Option<f64> {
// The rotation amount = cursor direction from the centre minus the
// reference angle, so the box reads the actual rotation.
if let Step::Angle { center, ref_angle } = &self.step {
let dest = (cursor.y - center.y).atan2(cursor.x - center.x);
Some(crate::command::dyn_display_angle_deg((dest - ref_angle) as f32) as f64)
} else {
None
match self.step {
Step::Angle { center } | Step::RefNew { center, .. } => {
let direction = cursor - center;
(direction.x.hypot(direction.y) > f64::EPSILON).then(|| {
crate::command::dyn_display_angle_deg(
direction.y.atan2(direction.x) as f32,
) as f64
})
}
_ => None,
}
}
}