diff --git a/locales/ar-SA/opencadstudio.ftl b/locales/ar-SA/opencadstudio.ftl
index 11271f783..4c570a291 100644
--- a/locales/ar-SA/opencadstudio.ftl
+++ b/locales/ar-SA/opencadstudio.ftl
@@ -2275,6 +2275,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = السماح بالتفجير
+    .angstroms = أنغستروم
+    .astronomical-units = وحدات فلكية
+    .behavior = السلوك
+    .block-already-exists-will-redefine-upon-ok = الكتلة "__ocs_fmt_0__" موجودة بالفعل — ستتم إعادة تعريفها عند النقر على موافق
+    .block-creates-a-block-definition-from-objects-you-select = ينشئ الأمر BLOCK تعريف كتلة من الكائنات المحددة.
+    .block-definition = تعريف الكتلة
+    .block-name = اسم الكتلة
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        الكتلة "__ocs_fmt_0__" موجودة بالفعل.
+        هل تريد إعادة تعريفها؟
+    .block-name-cannot-be-empty = لا يمكن أن يكون اسم الكتلة فارغًا.
+    .block-name-cannot-contain-invalid-chars = لا يمكن أن يحتوي اسم الكتلة على: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = لا يمكن أن يبدأ اسم الكتلة بـ '*'.
+    .block-unit-label = وحدة الكتلة:
+    .convert-to-block = تحويل إلى كتلة
+    .count-objects-selected = تم تحديد __ocs_fmt_0__ من الكائنات
+    .decameters = ديكامتر
+    .decimeters = ديسيمتر
+    .enter-block-description = أدخل وصف الكتلة...
+    .gigameters = جيجامتر
+    .hectometers = هكتومتر
+    .hyperlink-ellipsis = ارتباط تشعبي...
+    .hyperlink-star = ارتباط تشعبي*
+    .invalid-character-in-block-name = حرف غير صالح '__ocs_fmt_0__' في اسم الكتلة (\ / : * ? " < > | = ` غير مسموح بها)
+    .light-years = سنوات ضوئية
+    .match-block-orientation = مطابقة اتجاه الكتلة
+    .microinches = ميكروبوصة
+    .microns = ميكرون
+    .mils = ميل
+    .nanometers = نانومتر
+    .no-objects-selected = لم يتم تحديد أي كائنات
+    .no-objects-selected-you-must-select-objects-to-define-a-block = لم يتم تحديد أي كائنات. يجب تحديد كائنات لتعريف الكتلة.
+    .objects-title-case = كائنات
+    .parsecs = فرسخ فلكي
+    .pick-point = اختيار نقطة
+    .retain = احتفاظ
+    .scale-uniformly = تغيير الحجم بشكل متناسق
+    .specify-on-screen = تحديد على الشاشة
+    .to-layout = مع التخطيط
+    .us-survey-feet = أقدام مسح أمريكية
 errors =
     .save-warning = تحذير الحفظ
     .unable-to-save-drawing = تعذر حفظ الرسم
@@ -3760,6 +3801,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  حدد الكائنات:
+    .block-specify-insertion-base-point = BLOCK  حدد نقطة قاعدة الإدراج:
 model =
     .create = إنشاء
     .boolean = عمليات منطقية
diff --git a/locales/bg-BG/opencadstudio.ftl b/locales/bg-BG/opencadstudio.ftl
index d3f4ed151..5a10205ac 100644
--- a/locales/bg-BG/opencadstudio.ftl
+++ b/locales/bg-BG/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Разрешаване на разбиването
+    .angstroms = Ангстрьоми
+    .astronomical-units = Астрономически единици
+    .behavior = Поведение
+    .block-already-exists-will-redefine-upon-ok = Блокът "__ocs_fmt_0__" вече съществува — ще се преопредели при OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK създава определение на блок от избраните от вас обекти.
+    .block-definition = Определение на блок
+    .block-name = Име на блок
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Блокът "__ocs_fmt_0__" вече съществува.
+        Желаете ли да го преопределите?
+    .block-name-cannot-be-empty = Името на блока не може да бъде празно.
+    .block-name-cannot-contain-invalid-chars = Името на блока не може да съдържа: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Името на блока не може да започва с '*'.
+    .block-unit-label = Единица на блока:
+    .convert-to-block = Преобразуване в блок
+    .count-objects-selected = __ocs_fmt_0__ избрани обекта
+    .decameters = Декаметри
+    .decimeters = Дециметри
+    .enter-block-description = Въведете описание на блока...
+    .gigameters = Гигаметри
+    .hectometers = Хектометри
+    .hyperlink-ellipsis = Хипервръзка...
+    .hyperlink-star = Хипервръзка*
+    .invalid-character-in-block-name = Невалиден знак '__ocs_fmt_0__' в името на блока (не са разрешени \ / : * ? " < > | = `)
+    .light-years = Светлинни години
+    .match-block-orientation = Съгласуване на ориентацията
+    .microinches = Микроинчове
+    .microns = Микрони
+    .mils = Мили
+    .nanometers = Нанометри
+    .no-objects-selected = Няма избрани обекти
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Няма избрани обекти. Трябва да изберете обекти, за да дефинирате блок.
+    .objects-title-case = Обекти
+    .parsecs = Парсеци
+    .pick-point = Избор на точка
+    .retain = Запазване
+    .scale-uniformly = Равномерно мащабиране
+    .specify-on-screen = Указване на екрана
+    .to-layout = с оформлението
+    .us-survey-feet = Геодезически фута (САЩ)
 errors =
     .save-warning = Предупреждение при запазване
     .unable-to-save-drawing = Чертежът не може да бъде запазен
@@ -3747,6 +3788,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Изберете обекти:
+    .block-specify-insertion-base-point = BLOCK  Укажете базова точка на вмъкване:
 model =
     .create = Създаване
     .boolean = Булеви операции
diff --git a/locales/cs-CZ/opencadstudio.ftl b/locales/cs-CZ/opencadstudio.ftl
index ad2751b9f..c6b78eb9b 100644
--- a/locales/cs-CZ/opencadstudio.ftl
+++ b/locales/cs-CZ/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Povolit rozložení
+    .angstroms = Angströmy
+    .astronomical-units = Astronomické jednotky
+    .behavior = Chování
+    .block-already-exists-will-redefine-upon-ok = Blok "__ocs_fmt_0__" již existuje — po stisknutí OK bude předefinován
+    .block-creates-a-block-definition-from-objects-you-select = Příkaz BLOCK vytvoří definici bloku z vybraných objektů.
+    .block-definition = Definice bloku
+    .block-name = Název bloku
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Blok "__ocs_fmt_0__" již existuje.
+        Chcete jej předefinovat?
+    .block-name-cannot-be-empty = Název bloku nesmí být prázdný.
+    .block-name-cannot-contain-invalid-chars = Název bloku nesmí obsahovat: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Název bloku nesmí začínat znakem '*'.
+    .block-unit-label = Jednotka bloku:
+    .convert-to-block = Převést na blok
+    .count-objects-selected = Vybráno objektů: __ocs_fmt_0__
+    .decameters = Dekametry
+    .decimeters = Decimetry
+    .enter-block-description = Zadejte popis bloku...
+    .gigameters = Gigametry
+    .hectometers = Hektometry
+    .hyperlink-ellipsis = Hypertextový odkaz...
+    .hyperlink-star = Hypertextový odkaz*
+    .invalid-character-in-block-name = Neplatný znak '__ocs_fmt_0__' v názvu bloku (znaky \ / : * ? " < > | = ` nejsou povoleny)
+    .light-years = Světelné roky
+    .match-block-orientation = Přizpůsobit orientaci bloku
+    .microinches = Mikropalce
+    .microns = Mikrony
+    .mils = Míle (mils)
+    .nanometers = Nanometry
+    .no-objects-selected = Nejsou vybrány žádné objekty
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Nejsou vybrány žádné objekty. K definici bloku je nutné vybrat objekty.
+    .objects-title-case = Objekty
+    .parsecs = Parseky
+    .pick-point = Vybrat bod
+    .retain = Ponechat
+    .scale-uniformly = Měřítko rovnoměrně
+    .specify-on-screen = Zadat na obrazovce
+    .to-layout = rozvržení
+    .us-survey-feet = Zeměměřické stopy (USA)
 errors =
     .save-warning = Uložit varování
     .unable-to-save-drawing = Nákres nelze uložit
@@ -3745,6 +3786,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Vyberte objekty:
+    .block-specify-insertion-base-point = BLOCK  Zadejte základní bod vložení:
 model =
     .create = Vytvořit
     .boolean = Booleovské operace
diff --git a/locales/de-DE/opencadstudio.ftl b/locales/de-DE/opencadstudio.ftl
index e7ec7a59e..f72884cca 100644
--- a/locales/de-DE/opencadstudio.ftl
+++ b/locales/de-DE/opencadstudio.ftl
@@ -2263,6 +2263,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Ursprung zulassen
+    .angstroms = Angström
+    .astronomical-units = Astronomische Einheiten
+    .behavior = Verhalten
+    .block-already-exists-will-redefine-upon-ok = Block "__ocs_fmt_0__" existiert bereits — wird bei OK neu definiert
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK erstellt eine Blockdefinition aus den ausgewählten Objekten.
+    .block-definition = Blockdefinition
+    .block-name = Blockname
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Block "__ocs_fmt_0__" ist bereits vorhanden.
+        Möchten Sie ihn neu definieren?
+    .block-name-cannot-be-empty = Blockname darf nicht leer sein.
+    .block-name-cannot-contain-invalid-chars = Blockname darf nicht enthalten: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Blockname darf nicht mit '*' beginnen.
+    .block-unit-label = Blockeinheit:
+    .convert-to-block = In Block konvertieren
+    .count-objects-selected = __ocs_fmt_0__ Objekte ausgewählt
+    .decameters = Dekameter
+    .decimeters = Dezimeter
+    .enter-block-description = Blockbeschreibung eingeben...
+    .gigameters = Gigameter
+    .hectometers = Hektometer
+    .hyperlink-ellipsis = Hyperlink...
+    .hyperlink-star = Hyperlink*
+    .invalid-character-in-block-name = Ungültiges Zeichen '__ocs_fmt_0__' im Blocknamen (\ / : * ? " < > | = ` sind unzulässig)
+    .light-years = Lichtjahre
+    .match-block-orientation = Blockausrichtung anpassen
+    .microinches = Mikrozoll
+    .microns = Mikrometer
+    .mils = Mils
+    .nanometers = Nanometer
+    .no-objects-selected = Keine Objekte ausgewählt
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Keine Objekte ausgewählt. Sie müssen Objekte auswählen, um einen Block zu definieren.
+    .objects-title-case = Objekte
+    .parsecs = Parsec
+    .pick-point = Punkt wählen
+    .retain = Beibehalten
+    .scale-uniformly = Einheitlich skalieren
+    .specify-on-screen = Am Bildschirm bestimmen
+    .to-layout = an Layout
+    .us-survey-feet = US-Vermessungsfuß
 errors =
     .save-warning = Warnhinweise speichern
     .unable-to-save-drawing = Zeichnung konnte nicht gespeichert werden
@@ -3746,6 +3787,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Objekte auswählen:
+    .block-specify-insertion-base-point = BLOCK  Einfügebasispunkt angeben:
 model =
     .create = Erstellen
     .boolean = Boolesche Operationen
diff --git a/locales/el-GR/opencadstudio.ftl b/locales/el-GR/opencadstudio.ftl
index 612e50752..c3c229f97 100644
--- a/locales/el-GR/opencadstudio.ftl
+++ b/locales/el-GR/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Να επιτρέπεται η διάσπαση
+    .angstroms = Ώνγκστρομ
+    .astronomical-units = Αστρονομικές μονάδες
+    .behavior = Συμπεριφορά
+    .block-already-exists-will-redefine-upon-ok = Το μπλοκ "__ocs_fmt_0__" υπάρχει ήδη — θα επαναπροσδιοριστεί με το OK
+    .block-creates-a-block-definition-from-objects-you-select = Η εντολή BLOCK δημιουργεί έναν ορισμό μπλοκ από τα επιλεγμένα αντικείμενα.
+    .block-definition = Ορισμός μπλοκ
+    .block-name = Όνομα μπλοκ
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Το μπλοκ "__ocs_fmt_0__" υπάρχει ήδη.
+        Θέλετε να το επαναπροσδιορίσετε;
+    .block-name-cannot-be-empty = Το όνομα του μπλοκ δεν μπορεί να είναι κενό.
+    .block-name-cannot-contain-invalid-chars = Το όνομα του μπλοκ δεν μπορεί να περιέχει: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Το όνομα του μπλοκ δεν μπορεί να αρχίζει με '*'.
+    .block-unit-label = Μονάδα μπλοκ:
+    .convert-to-block = Μετατροπή σε μπλοκ
+    .count-objects-selected = __ocs_fmt_0__ επιλεγμένα αντικείμενα
+    .decameters = Δεκάμετρα
+    .decimeters = Δεκατόμετρα
+    .enter-block-description = Εισαγάγετε περιγραφή μπλοκ...
+    .gigameters = Γιγάμετρα
+    .hectometers = Εκατόμετρα
+    .hyperlink-ellipsis = Υπερσύνδεσμος...
+    .hyperlink-star = Υπερσύνδεσμος*
+    .invalid-character-in-block-name = Μη έγκυρος χαρακτήρας '__ocs_fmt_0__' στο όνομα του μπλοκ (δεν επιτρέπονται τα \ / : * ? " < > | = `)
+    .light-years = Έτη φωτός
+    .match-block-orientation = Ταίριασμα προσανατολισμού
+    .microinches = Μικροΐντσες
+    .microns = Μικρά
+    .mils = Mils
+    .nanometers = Νανόμετρα
+    .no-objects-selected = Δεν έχουν επιλεγεί αντικείμενα
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Δεν έχουν επιλεγεί αντικείμενα. Πρέπει να επιλέξετε αντικείμενα για να ορίσετε ένα μπλοκ.
+    .objects-title-case = Αντικείμενα
+    .parsecs = Παρσέκ
+    .pick-point = Επιλογή σημείου
+    .retain = Διατήρηση
+    .scale-uniformly = Ομοιόμορφη κλίμακα
+    .specify-on-screen = Καθορισμός στην οθόνη
+    .to-layout = με τη διάταξη
+    .us-survey-feet = Τοπογραφικά πόδια ΗΠΑ
 errors =
     .save-warning = Προειδοποίηση αποθήκευσης
     .unable-to-save-drawing = Αδυναμία αποθήκευσης σχεδίου
@@ -3748,6 +3789,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Επιλέξτε αντικείμενα:
+    .block-specify-insertion-base-point = BLOCK  Καθορίστε σημείο βάσης εισαγωγής:
 model =
     .create = Δημιουργία
     .boolean = Δυαδική πράξη
diff --git a/locales/en-US/opencadstudio.ftl b/locales/en-US/opencadstudio.ftl
index e2beacbf0..3d8e35ea9 100644
--- a/locales/en-US/opencadstudio.ftl
+++ b/locales/en-US/opencadstudio.ftl
@@ -2263,6 +2263,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Allow exploding
+    .angstroms = Angstroms
+    .astronomical-units = Astronomical Units
+    .behavior = Behavior
+    .block-already-exists-will-redefine-upon-ok = Block "__ocs_fmt_0__" already exists — will redefine upon OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK creates a block definition from objects you select.
+    .block-definition = Block Definition
+    .block-name = Block name
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Block "__ocs_fmt_0__" already exists.
+        Do you want to redefine it?
+    .block-name-cannot-be-empty = Block name cannot be empty.
+    .block-name-cannot-contain-invalid-chars = Block name cannot contain: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Block name cannot start with '*'.
+    .block-unit-label = Block unit:
+    .convert-to-block = Convert to block
+    .count-objects-selected = __ocs_fmt_0__ objects selected
+    .decameters = Decameters
+    .decimeters = Decimeters
+    .enter-block-description = Enter block description...
+    .gigameters = Gigameters
+    .hectometers = Hectometers
+    .hyperlink-ellipsis = Hyperlink...
+    .hyperlink-star = Hyperlink*
+    .invalid-character-in-block-name = Invalid character '__ocs_fmt_0__' in block name (\ / : * ? " < > | = ` are not allowed)
+    .light-years = Light Years
+    .match-block-orientation = Match block orientation
+    .microinches = Microinches
+    .microns = Microns
+    .mils = Mils
+    .nanometers = Nanometers
+    .no-objects-selected = No objects selected
+    .no-objects-selected-you-must-select-objects-to-define-a-block = No objects selected. You must select objects to define a block.
+    .objects-title-case = Objects
+    .parsecs = Parsecs
+    .pick-point = Pick point
+    .retain = Retain
+    .scale-uniformly = Scale uniformly
+    .specify-on-screen = Specify On-screen
+    .to-layout = to layout
+    .us-survey-feet = US Survey Feet
 errors =
     .save-warning = Save Warning
     .unable-to-save-drawing = Unable to Save Drawing
@@ -3749,6 +3790,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Select objects:
+    .block-specify-insertion-base-point = BLOCK  Specify insertion base point:
 model =
     .create = Create
     .boolean = Boolean
diff --git a/locales/es-ES/opencadstudio.ftl b/locales/es-ES/opencadstudio.ftl
index 0842935a8..82b664dcb 100644
--- a/locales/es-ES/opencadstudio.ftl
+++ b/locales/es-ES/opencadstudio.ftl
@@ -2263,6 +2263,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Permitir descomponer
+    .angstroms = Angstroms
+    .astronomical-units = Unidades astronómicas
+    .behavior = Comportamiento
+    .block-already-exists-will-redefine-upon-ok = El bloque "__ocs_fmt_0__" ya existe — se redefinirá al pulsar Aceptar
+    .block-creates-a-block-definition-from-objects-you-select = BLOQUE crea una definición de bloque a partir de los objetos seleccionados.
+    .block-definition = Definición de bloque
+    .block-name = Nombre del bloque
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        El bloque "__ocs_fmt_0__" ya existe.
+        ¿Desea redefinirlo?
+    .block-name-cannot-be-empty = El nombre del bloque no puede estar vacío.
+    .block-name-cannot-contain-invalid-chars = El nombre del bloque no puede contener: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = El nombre del bloque no puede empezar por '*'.
+    .block-unit-label = Unidad de bloque:
+    .convert-to-block = Convertir en bloque
+    .count-objects-selected = __ocs_fmt_0__ objetos seleccionados
+    .decameters = Decámetros
+    .decimeters = Decímetros
+    .enter-block-description = Introduzca la descripción del bloque...
+    .gigameters = Gigámetros
+    .hectometers = Hectómetros
+    .hyperlink-ellipsis = Hipervínculo...
+    .hyperlink-star = Hipervínculo*
+    .invalid-character-in-block-name = Carácter no válido '__ocs_fmt_0__' en el nombre del bloque (no se permiten \ / : * ? " < > | = `)
+    .light-years = Años luz
+    .match-block-orientation = Igualar orientación de bloque
+    .microinches = Micropulgadas
+    .microns = Micras
+    .mils = Milésimas de pulgada
+    .nanometers = Nanómetros
+    .no-objects-selected = No hay objetos seleccionados
+    .no-objects-selected-you-must-select-objects-to-define-a-block = No hay objetos seleccionados. Debe seleccionar objetos para definir un bloque.
+    .objects-title-case = Objetos
+    .parsecs = Pársecs
+    .pick-point = Designar punto
+    .retain = Retener
+    .scale-uniformly = Escala uniforme
+    .specify-on-screen = Precisar en pantalla
+    .to-layout = a la presentación
+    .us-survey-feet = Pies de agrimensura de EE. UU.
 errors =
     .save-warning = Advertencia de guardado
     .unable-to-save-drawing = No se puede guardar el dibujo
@@ -3748,6 +3789,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Designar objetos:
+    .block-specify-insertion-base-point = BLOCK  Precise punto base de inserción:
 model =
     .create = Crear
     .boolean = Booleanas
diff --git a/locales/fi-FI/opencadstudio.ftl b/locales/fi-FI/opencadstudio.ftl
index 6ccf9ff8e..ceb1e3d93 100644
--- a/locales/fi-FI/opencadstudio.ftl
+++ b/locales/fi-FI/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Salli hajottaminen
+    .angstroms = Ångströmit
+    .astronomical-units = Astronomiset yksiköt
+    .behavior = Toiminta
+    .block-already-exists-will-redefine-upon-ok = Lohko "__ocs_fmt_0__" on jo olemassa — määritetään uudelleen valitsemalla OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK luo lohkomäärityksen valitsemistasi kohteista.
+    .block-definition = Lohkon määritys
+    .block-name = Lohkon nimi
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Lohko "__ocs_fmt_0__" on jo olemassa.
+        Haluatko määrittää sen uudelleen?
+    .block-name-cannot-be-empty = Lohkon nimi ei voi olla tyhjä.
+    .block-name-cannot-contain-invalid-chars = Lohkon nimi ei saa sisältää merkkejä: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Lohkon nimi ei voi alkaa merkillä '*'.
+    .block-unit-label = Lohkoyksikkö:
+    .convert-to-block = Muunna lohkoksi
+    .count-objects-selected = __ocs_fmt_0__ kohdetta valittu
+    .decameters = Dekametrit
+    .decimeters = Desimetrit
+    .enter-block-description = Kirjoita lohkon kuvaus...
+    .gigameters = Gigametrit
+    .hectometers = Hehtometrit
+    .hyperlink-ellipsis = Hyperlinkki...
+    .hyperlink-star = Hyperlinkki*
+    .invalid-character-in-block-name = Virheellinen merkki '__ocs_fmt_0__' lohkon nimessä (merkit \ / : * ? " < > | = ` eivät ole sallittuja)
+    .light-years = Valovuodet
+    .match-block-orientation = Sovita lohkon suuntaus
+    .microinches = Mikrotuumat
+    .microns = Mikronit
+    .mils = Milsit
+    .nanometers = Nanometrit
+    .no-objects-selected = Ei kohteita valittuna
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Kohteita ei ole valittu. Sinun on valittava kohteet lohkon määrittämiseksi.
+    .objects-title-case = Kohteet
+    .parsecs = Parsekit
+    .pick-point = Valitse piste
+    .retain = Säilytä
+    .scale-uniformly = Skaalaa tasaisesti
+    .specify-on-screen = Määritä näytöltä
+    .to-layout = asetteluun
+    .us-survey-feet = US Survey -jalat
 errors =
     .save-warning = Tallenna varoitus
     .unable-to-save-drawing = Piirustusta ei voi tallentaa
@@ -3747,6 +3788,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Valitse kohteet:
+    .block-specify-insertion-base-point = BLOCK  Määritä sijoituksen peruspiste:
 model =
     .create = Luo
     .boolean = Boolen operaatiot
diff --git a/locales/fr-FR/opencadstudio.ftl b/locales/fr-FR/opencadstudio.ftl
index 73cc69a1c..1da56c204 100644
--- a/locales/fr-FR/opencadstudio.ftl
+++ b/locales/fr-FR/opencadstudio.ftl
@@ -2263,6 +2263,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Autoriser la décomposition
+    .angstroms = Angströms
+    .astronomical-units = Unités astronomiques
+    .behavior = Comportement
+    .block-already-exists-will-redefine-upon-ok = Le bloc "__ocs_fmt_0__" existe déjà — sera redéfini en cliquant sur OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOC crée une définition de bloc à partir des objets sélectionnés.
+    .block-definition = Définition de bloc
+    .block-name = Nom du bloc
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Le bloc "__ocs_fmt_0__" existe déjà.
+        Voulez-vous le redéfinir ?
+    .block-name-cannot-be-empty = Le nom du bloc ne peut pas être vide.
+    .block-name-cannot-contain-invalid-chars = Le nom du bloc ne peut pas contenir : \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Le nom du bloc ne peut pas commencer par '*'.
+    .block-unit-label = Unité du bloc :
+    .convert-to-block = Convertir en bloc
+    .count-objects-selected = __ocs_fmt_0__ objets sélectionnés
+    .decameters = Décamètres
+    .decimeters = Décimètres
+    .enter-block-description = Entrez la description du bloc...
+    .gigameters = Gigamètres
+    .hectometers = Hectomètres
+    .hyperlink-ellipsis = Lien hypertexte...
+    .hyperlink-star = Lien hypertexte*
+    .invalid-character-in-block-name = Caractère non valide '__ocs_fmt_0__' dans le nom du bloc (\ / : * ? " < > | = ` interdits)
+    .light-years = Années-lumière
+    .match-block-orientation = Aligner l'orientation du bloc
+    .microinches = Micropouces
+    .microns = Microns
+    .mils = Mils
+    .nanometers = Nanomètres
+    .no-objects-selected = Aucun objet sélectionné
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Aucun objet sélectionné. Vous devez sélectionner des objets pour définir un bloc.
+    .objects-title-case = Objets
+    .parsecs = Parsecs
+    .pick-point = Choisir un point
+    .retain = Conserver
+    .scale-uniformly = Échelle uniforme
+    .specify-on-screen = Spécifier à l'écran
+    .to-layout = sur la présentation
+    .us-survey-feet = Pieds d'arpentage US
 errors =
     .save-warning = Enregistrer l' avertissement
     .unable-to-save-drawing = Impossible de sauvegarder le dessin
@@ -3748,6 +3789,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Sélectionnez les objets :
+    .block-specify-insertion-base-point = BLOCK  Spécifiez le point de base d'insertion :
 model =
     .create = Créer
     .boolean = Opérations booléennes
diff --git a/locales/hi-IN/opencadstudio.ftl b/locales/hi-IN/opencadstudio.ftl
index 27f433885..07dbdef5b 100644
--- a/locales/hi-IN/opencadstudio.ftl
+++ b/locales/hi-IN/opencadstudio.ftl
@@ -2251,6 +2251,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = विस्फोट की अनुमति दें
+    .angstroms = एंगस्ट्रॉम
+    .astronomical-units = खगोलीय इकाइयाँ
+    .behavior = व्यवहार
+    .block-already-exists-will-redefine-upon-ok = ब्लॉक "__ocs_fmt_0__" पहले से मौजूद है — ठीक पर क्लिक करने पर पुनः परिभाषित होगा
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK चयनित ऑब्जेक्ट्स से एक ब्लॉक परिभाषा बनाता है।
+    .block-definition = ब्लॉक परिभाषा
+    .block-name = ब्लॉक नाम
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        ब्लॉक "__ocs_fmt_0__" पहले से मौजूद है।
+        क्या आप इसे पुनः परिभाषित करना चाहते हैं?
+    .block-name-cannot-be-empty = ब्लॉक नाम खाली नहीं हो सकता।
+    .block-name-cannot-contain-invalid-chars = ब्लॉक नाम में यह शामिल नहीं हो सकता: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = ब्लॉक नाम '*' से शुरू नहीं हो सकता।
+    .block-unit-label = ब्लॉक इकाई:
+    .convert-to-block = ब्लॉक में बदलें
+    .count-objects-selected = __ocs_fmt_0__ ऑब्जेक्ट चयनित
+    .decameters = डेकामीटर
+    .decimeters = डेसीमीटर
+    .enter-block-description = ब्लॉक विवरण दर्ज करें...
+    .gigameters = गीगामीटर
+    .hectometers = हेक्टोमीटर
+    .hyperlink-ellipsis = हाइपरलिंक...
+    .hyperlink-star = हाइपरलिंक*
+    .invalid-character-in-block-name = ब्लॉक नाम में अमान्य वर्ण '__ocs_fmt_0__' (\ / : * ? " < > | = ` की अनुमति नहीं है)
+    .light-years = प्रकाश वर्ष
+    .match-block-orientation = ब्लॉक ओरिएंटेशन मिलान
+    .microinches = माइक्रोइंच
+    .microns = माइक्रोन
+    .mils = मिल्स
+    .nanometers = नैनोमीटर
+    .no-objects-selected = कोई ऑब्जेक्ट चयनित नहीं
+    .no-objects-selected-you-must-select-objects-to-define-a-block = कोई ऑब्जेक्ट चयनित नहीं है। ब्लॉक को परिभाषित करने के लिए ऑब्जेक्ट चुनना आवश्यक है।
+    .objects-title-case = ऑब्जेक्ट
+    .parsecs = पारसेक
+    .pick-point = बिंदु चुनें
+    .retain = बनाए रखें
+    .scale-uniformly = समान रूप से स्केल करें
+    .specify-on-screen = स्क्रीन पर निर्दिष्ट करें
+    .to-layout = लेआउट के अनुसार
+    .us-survey-feet = यूएस सर्वेक्षण फीट
 errors =
     .save-warning = चेतावनी सहेजें
     .unable-to-save-drawing = ड्रॉइंग सहेजी नहीं जा सकी
@@ -3736,6 +3777,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  ऑब्जेक्ट चुनें:
+    .block-specify-insertion-base-point = BLOCK  सम्मिलन आधार बिंदु निर्दिष्ट करें:
 model =
     .create = बनाएँ
     .boolean = बूलियन संक्रियाएँ
diff --git a/locales/hu-HU/opencadstudio.ftl b/locales/hu-HU/opencadstudio.ftl
index b9a9c2896..4e3cf7b42 100644
--- a/locales/hu-HU/opencadstudio.ftl
+++ b/locales/hu-HU/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Szétvetés engedélyezése
+    .angstroms = Ångström
+    .astronomical-units = Csillagászati egységek
+    .behavior = Viselkedés
+    .block-already-exists-will-redefine-upon-ok = A(z) "__ocs_fmt_0__" blokk már létezik — az OK gombra kattintva újradefiniálódik
+    .block-creates-a-block-definition-from-objects-you-select = A BLOCK parancs blokkdefiníciót hoz létre a kijelölt objektumokból.
+    .block-definition = Blokkdefiníció
+    .block-name = Blokknév
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        A(z) "__ocs_fmt_0__" blokk már létezik.
+        Újra szeretné definiálni?
+    .block-name-cannot-be-empty = A blokknév nem lehet üres.
+    .block-name-cannot-contain-invalid-chars = A blokknév nem tartalmazhatja a következőket: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = A blokknév nem kezdődhet '*' karakterrel.
+    .block-unit-label = Blokk mértékegysége:
+    .convert-to-block = Átalakítás blokká
+    .count-objects-selected = __ocs_fmt_0__ objektum kijelölve
+    .decameters = Dekaméter
+    .decimeters = Deciméter
+    .enter-block-description = Adja meg a blokk leírását...
+    .gigameters = Gigaméter
+    .hectometers = Hektométer
+    .hyperlink-ellipsis = Hivatkozás...
+    .hyperlink-star = Hivatkozás*
+    .invalid-character-in-block-name = Érvénytelen karakter ('__ocs_fmt_0__') a blokknévben (\ / : * ? " < > | = ` nem használható)
+    .light-years = Fényévek
+    .match-block-orientation = Blokktájolás igazítása
+    .microinches = Mikrohüvelyk
+    .microns = Mikron
+    .mils = Mil
+    .nanometers = Nanométer
+    .no-objects-selected = Nincs kijelölt objektum
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Nincsenek kijelölt objektumok. A blokk definiálásához objektumokat kell kijelölni.
+    .objects-title-case = Objektumok
+    .parsecs = Parszekek
+    .pick-point = Pont kijelölése
+    .retain = Megtartás
+    .scale-uniformly = Egyenletes léptékezés
+    .specify-on-screen = Megadás a képernyőn
+    .to-layout = az elrendezéshez
+    .us-survey-feet = USA geodéziai láb
 errors =
     .save-warning = Figyelmeztetés mentése
     .unable-to-save-drawing = Nem sikerült menteni a rajzot
@@ -3747,6 +3788,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Válasszon objektumokat:
+    .block-specify-insertion-base-point = BLOCK  Adja meg a beillesztési bázispontot:
 model =
     .create = Létrehozás
     .boolean = Logikai műveletek
diff --git a/locales/it-IT/opencadstudio.ftl b/locales/it-IT/opencadstudio.ftl
index 394d9423e..c8f01c5e0 100644
--- a/locales/it-IT/opencadstudio.ftl
+++ b/locales/it-IT/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Consenti esplosione
+    .angstroms = Angstrom
+    .astronomical-units = Unità astronomiche
+    .behavior = Comportamento
+    .block-already-exists-will-redefine-upon-ok = Il blocco "__ocs_fmt_0__" esiste già — verrà ridefinito con OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOCCO crea una definizione di blocco dagli oggetti selezionati.
+    .block-definition = Definizione blocco
+    .block-name = Nome blocco
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Il blocco "__ocs_fmt_0__" esiste già.
+        Ridefinirlo?
+    .block-name-cannot-be-empty = Il nome del blocco non può essere vuoto.
+    .block-name-cannot-contain-invalid-chars = Il nome del blocco non può contenere: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Il nome del blocco non può iniziare con '*'.
+    .block-unit-label = Unità blocco:
+    .convert-to-block = Converti in blocco
+    .count-objects-selected = __ocs_fmt_0__ oggetti selezionati
+    .decameters = Decametri
+    .decimeters = Decimetri
+    .enter-block-description = Inserisci descrizione blocco...
+    .gigameters = Gigametri
+    .hectometers = Ettometri
+    .hyperlink-ellipsis = Collegamento ipertestuale...
+    .hyperlink-star = Collegamento ipertestuale*
+    .invalid-character-in-block-name = Carattere non valido '__ocs_fmt_0__' nel nome del blocco (\ / : * ? " < > | = ` non consentiti)
+    .light-years = Anni luce
+    .match-block-orientation = Allinea orientamento blocco
+    .microinches = Micropollici
+    .microns = Micron
+    .mils = Mils
+    .nanometers = Nanometri
+    .no-objects-selected = Nessun oggetto selezionato
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Nessun oggetto selezionato. Selezionare gli oggetti per definire un blocco.
+    .objects-title-case = Oggetti
+    .parsecs = Parsec
+    .pick-point = Scegli punto
+    .retain = Mantieni
+    .scale-uniformly = Scala uniforme
+    .specify-on-screen = Specifica sullo schermo
+    .to-layout = al layout
+    .us-survey-feet = Piedi topografici USA
 errors =
     .save-warning = Salva avviso
     .unable-to-save-drawing = Impossibile salvare il disegno
@@ -3747,6 +3788,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Selezionare oggetti:
+    .block-specify-insertion-base-point = BLOCK  Specificare punto base di inserimento:
 model =
     .create = Crea
     .boolean = Operazioni booleane
diff --git a/locales/ja-JP/opencadstudio.ftl b/locales/ja-JP/opencadstudio.ftl
index 3f548f133..71b7eec50 100644
--- a/locales/ja-JP/opencadstudio.ftl
+++ b/locales/ja-JP/opencadstudio.ftl
@@ -2253,6 +2253,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = 分解を許可
+    .angstroms = オングストローム
+    .astronomical-units = 天文単位
+    .behavior = 動作
+    .block-already-exists-will-redefine-upon-ok = ブロック "__ocs_fmt_0__" は既に存在します — [OK] で再定義されます
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK コマンドは選択したオブジェクトからブロック定義を作成します。
+    .block-definition = ブロック定義
+    .block-name = ブロック名
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        ブロック "__ocs_fmt_0__" は既に存在します。
+        再定義しますか?
+    .block-name-cannot-be-empty = ブロック名を空白にすることはできません。
+    .block-name-cannot-contain-invalid-chars = ブロック名に次の文字を含めることはできません: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = ブロック名を '*' で始めることはできません。
+    .block-unit-label = ブロックの単位:
+    .convert-to-block = ブロックに変換
+    .count-objects-selected = __ocs_fmt_0__ 個のオブジェクトが選択されました
+    .decameters = デカメートル
+    .decimeters = デシメートル
+    .enter-block-description = ブロックの説明を入力...
+    .gigameters = ギガメートル
+    .hectometers = ヘクトメートル
+    .hyperlink-ellipsis = ハイパーリンク...
+    .hyperlink-star = ハイパーリンク*
+    .invalid-character-in-block-name = ブロック名に無効な文字 '__ocs_fmt_0__' が含まれています (\ / : * ? " < > | = ` は使用不可)
+    .light-years = 光年
+    .match-block-orientation = ブロックの向きをシートに合わせる
+    .microinches = マイクロインチ
+    .microns = ミクロン
+    .mils = ミル
+    .nanometers = ナノメートル
+    .no-objects-selected = オブジェクトが選択されていません
+    .no-objects-selected-you-must-select-objects-to-define-a-block = オブジェクトが選択されていません。ブロックを定義するにはオブジェクトを選択する必要があります。
+    .objects-title-case = オブジェクト
+    .parsecs = パーセク
+    .pick-point = 点を指定
+    .retain = 保持
+    .scale-uniformly = 均一に尺度変更
+    .specify-on-screen = 画面上で指定
+    .to-layout = レイアウトに合わせる
+    .us-survey-feet = 米国測量フィート
 errors =
     .save-warning = 保存の警告
     .unable-to-save-drawing = 図面を保存できません
@@ -3736,6 +3777,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  オブジェクトを選択:
+    .block-specify-insertion-base-point = BLOCK  挿入基点を指定:
 model =
     .create = 作成
     .boolean = ブール演算
diff --git a/locales/ko-KR/opencadstudio.ftl b/locales/ko-KR/opencadstudio.ftl
index 8417cdab4..9e0f7086e 100644
--- a/locales/ko-KR/opencadstudio.ftl
+++ b/locales/ko-KR/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = 분해 허용
+    .angstroms = 옹스트롬
+    .astronomical-units = 천문 단위
+    .behavior = 동작
+    .block-already-exists-will-redefine-upon-ok = 블록 "__ocs_fmt_0__"이(가) 이미 존재합니다 — 확인 시 재정의됩니다
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK 명령어는 선택한 객체에서 블록 정의를 생성합니다.
+    .block-definition = 블록 정의
+    .block-name = 블록 이름
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        블록 "__ocs_fmt_0__"이(가) 이미 존재합니다.
+        재정의하시겠습니까?
+    .block-name-cannot-be-empty = 블록 이름은 비워둘 수 없습니다.
+    .block-name-cannot-contain-invalid-chars = 블록 이름에는 \ / : * ? " < > | = ` 문자를 포함할 수 없습니다.
+    .block-name-cannot-start-with-star = 블록 이름은 '*'로 시작할 수 없습니다.
+    .block-unit-label = 블록 단위:
+    .convert-to-block = 블록으로 변환
+    .count-objects-selected = __ocs_fmt_0__개 객체 선택됨
+    .decameters = 데카미터
+    .decimeters = 데시미터
+    .enter-block-description = 블록 설명 입력...
+    .gigameters = 기가미터
+    .hectometers = 헥토미터
+    .hyperlink-ellipsis = 하이퍼링크...
+    .hyperlink-star = 하이퍼링크*
+    .invalid-character-in-block-name = 블록 이름에 잘못된 문자 '__ocs_fmt_0__'이(가) 있습니다 (\ / : * ? " < > | = ` 사용 불가)
+    .light-years = 광년
+    .match-block-orientation = 블록 방향 일치
+    .microinches = 마이크로인치
+    .microns = 미크론
+    .mils = 밀
+    .nanometers = 나노미터
+    .no-objects-selected = 선택된 객체 없음
+    .no-objects-selected-you-must-select-objects-to-define-a-block = 선택된 객체가 없습니다. 블록을 정의하려면 객체를 선택해야 합니다.
+    .objects-title-case = 객체
+    .parsecs = 파섹
+    .pick-point = 점 선택
+    .retain = 유지
+    .scale-uniformly = 균일하게 축척
+    .specify-on-screen = 화면상에 지정
+    .to-layout = 배치에 맞춤
+    .us-survey-feet = 미국 측량 피트
 errors =
     .save-warning = 경고 저장
     .unable-to-save-drawing = 도면을 저장할 수 없습니다
@@ -3747,6 +3788,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  객체 선택:
+    .block-specify-insertion-base-point = BLOCK  삽입 기준점 지정:
 model =
     .create = 생성
     .boolean = 불리언 연산
diff --git a/locales/nl-NL/opencadstudio.ftl b/locales/nl-NL/opencadstudio.ftl
index c486bd035..b2d273642 100644
--- a/locales/nl-NL/opencadstudio.ftl
+++ b/locales/nl-NL/opencadstudio.ftl
@@ -2263,6 +2263,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Mogen ontleden toestaan
+    .angstroms = Ångström
+    .astronomical-units = Astronomische eenheden
+    .behavior = Gedrag
+    .block-already-exists-will-redefine-upon-ok = Blok "__ocs_fmt_0__" bestaat al — wordt opnieuw gedefinieerd bij OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK maakt een blokdefinitie van de objecten die u selecteert.
+    .block-definition = Blokdefinitie
+    .block-name = Bloknaam
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Blok "__ocs_fmt_0__" bestaat al.
+        Wilt u dit opnieuw definiëren?
+    .block-name-cannot-be-empty = Bloknaam mag niet leeg zijn.
+    .block-name-cannot-contain-invalid-chars = Bloknaam mag niet bevatten: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Bloknaam mag niet beginnen met '*'.
+    .block-unit-label = Blokeenheid:
+    .convert-to-block = Converteren naar blok
+    .count-objects-selected = __ocs_fmt_0__ objecten geselecteerd
+    .decameters = Decameters
+    .decimeters = Decimeters
+    .enter-block-description = Voer blokbeschrijving in...
+    .gigameters = Gigameters
+    .hectometers = Hectometers
+    .hyperlink-ellipsis = Hyperlink...
+    .hyperlink-star = Hyperlink*
+    .invalid-character-in-block-name = Ongeldig teken '__ocs_fmt_0__' in bloknaam (\ / : * ? " < > | = ` zijn niet toegestaan)
+    .light-years = Lichtjaren
+    .match-block-orientation = Blokoriëntatie aanpassen
+    .microinches = Micro-inches
+    .microns = Microns
+    .mils = Mils
+    .nanometers = Nanometers
+    .no-objects-selected = Geen objecten geselecteerd
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Geen objecten geselecteerd. U moet objecten selecteren om een blok te definiëren.
+    .objects-title-case = Objecten
+    .parsecs = Parsecs
+    .pick-point = Punt kiezen
+    .retain = Behouden
+    .scale-uniformly = Uniform schalen
+    .specify-on-screen = Op scherm opgeven
+    .to-layout = aan lay-out
+    .us-survey-feet = US Survey Feet
 errors =
     .save-warning = Waarschuwing opslaan
     .unable-to-save-drawing = Kan tekening niet opslaan
@@ -3746,6 +3787,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Objecten selecteren:
+    .block-specify-insertion-base-point = BLOCK  Invoegbasispunt opgeven:
 model =
     .create = Maken
     .boolean = Booleaanse bewerkingen
diff --git a/locales/pl-PL/opencadstudio.ftl b/locales/pl-PL/opencadstudio.ftl
index 503339cb1..4265ca030 100644
--- a/locales/pl-PL/opencadstudio.ftl
+++ b/locales/pl-PL/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Zezwalaj na rozbijanie
+    .angstroms = Angströmy
+    .astronomical-units = Jednostki astronomiczne
+    .behavior = Zachowanie
+    .block-already-exists-will-redefine-upon-ok = Blok "__ocs_fmt_0__" już istnieje — zostanie ponownie zdefiniowany po kliknięciu OK
+    .block-creates-a-block-definition-from-objects-you-select = Polecenie BLOCK tworzy definicję bloku z wybranych obiektów.
+    .block-definition = Definicja bloku
+    .block-name = Nazwa bloku
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Blok "__ocs_fmt_0__" już istnieje.
+        Czy chcesz go ponownie zdefiniować?
+    .block-name-cannot-be-empty = Nazwa bloku nie może być pusta.
+    .block-name-cannot-contain-invalid-chars = Nazwa bloku nie może zawierać znaków: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Nazwa bloku nie może zaczynać się od znaku '*'.
+    .block-unit-label = Jednostka bloku:
+    .convert-to-block = Konwertuj na blok
+    .count-objects-selected = Wybrano obiektów: __ocs_fmt_0__
+    .decameters = Dekametry
+    .decimeters = Decymetry
+    .enter-block-description = Wprowadź opis bloku...
+    .gigameters = Gigametry
+    .hectometers = Hektometry
+    .hyperlink-ellipsis = Hiperłącze...
+    .hyperlink-star = Hiperłącze*
+    .invalid-character-in-block-name = Nieprawidłowy znak '__ocs_fmt_0__' w nazwie bloku (znaki \ / : * ? " < > | = ` są niedozwolone)
+    .light-years = Lata świetlne
+    .match-block-orientation = Dopasuj orientację bloku
+    .microinches = Mikrocale
+    .microns = Mikrony
+    .mils = Mile (mils)
+    .nanometers = Nanometry
+    .no-objects-selected = Nie wybrano żadnych obiektów
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Nie wybrano obiektów. Należy wybrać obiekty, aby zdefiniować blok.
+    .objects-title-case = Obiekty
+    .parsecs = Parseki
+    .pick-point = Wskaż punkt
+    .retain = Zachowaj
+    .scale-uniformly = Skaluj jednolicie
+    .specify-on-screen = Określ na ekranie
+    .to-layout = do układu
+    .us-survey-feet = Stopy geodezyjne USA
 errors =
     .save-warning = Zapisz ostrzeżenie
     .unable-to-save-drawing = Nie można zapisać rysunku
@@ -3747,6 +3788,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Wybierz obiekty:
+    .block-specify-insertion-base-point = BLOCK  Określ bazowy punkt wstawienia:
 model =
     .create = Utwórz
     .boolean = Operacje boolowskie
diff --git a/locales/pt-BR/opencadstudio.ftl b/locales/pt-BR/opencadstudio.ftl
index 7b21b39cb..e8bebd4aa 100644
--- a/locales/pt-BR/opencadstudio.ftl
+++ b/locales/pt-BR/opencadstudio.ftl
@@ -2263,6 +2263,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Permitir explodir
+    .angstroms = Angstroms
+    .astronomical-units = Unidades astronômicas
+    .behavior = Comportamento
+    .block-already-exists-will-redefine-upon-ok = O bloco "__ocs_fmt_0__" já existe — será redefinido ao clicar em OK
+    .block-creates-a-block-definition-from-objects-you-select = BLOCO cria uma definição de bloco a partir dos objetos selecionados.
+    .block-definition = Definição de bloco
+    .block-name = Nome do bloco
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        O bloco "__ocs_fmt_0__" já existe.
+        Deseja redefini-lo?
+    .block-name-cannot-be-empty = O nome do bloco não pode estar vazio.
+    .block-name-cannot-contain-invalid-chars = O nome do bloco não pode conter: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = O nome do bloco não pode começar com '*'.
+    .block-unit-label = Unidade do bloco:
+    .convert-to-block = Converter em bloco
+    .count-objects-selected = __ocs_fmt_0__ objetos selecionados
+    .decameters = Decâmetros
+    .decimeters = Decímetros
+    .enter-block-description = Digite a descrição do bloco...
+    .gigameters = Gigâmetros
+    .hectometers = Hectômetros
+    .hyperlink-ellipsis = Hiperlink...
+    .hyperlink-star = Hiperlink*
+    .invalid-character-in-block-name = Caractere inválido '__ocs_fmt_0__' no nome do bloco (\ / : * ? " < > | = ` não são permitidos)
+    .light-years = Anos-luz
+    .match-block-orientation = Corresponder orientação do bloco
+    .microinches = Micropolegadas
+    .microns = Mícrons
+    .mils = Mils
+    .nanometers = Nanômetros
+    .no-objects-selected = Nenhum objeto selecionado
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Nenhum objeto selecionado. Você deve selecionar objetos para definir um bloco.
+    .objects-title-case = Objetos
+    .parsecs = Parsecs
+    .pick-point = Escolher ponto
+    .retain = Reter
+    .scale-uniformly = Dimensionar uniformemente
+    .specify-on-screen = Especificar na tela
+    .to-layout = ao layout
+    .us-survey-feet = Pés topográficos dos EUA
 errors =
     .save-warning = Aviso de salvamento
     .unable-to-save-drawing = Não foi possível salvar o desenho
@@ -3748,6 +3789,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Selecionar objetos:
+    .block-specify-insertion-base-point = BLOCK  Especificar ponto base de inserção:
 model =
     .create = Criar
     .boolean = Operações booleanas
diff --git a/locales/ru-RU/opencadstudio.ftl b/locales/ru-RU/opencadstudio.ftl
index 9414c0b99..3f3ddea23 100644
--- a/locales/ru-RU/opencadstudio.ftl
+++ b/locales/ru-RU/opencadstudio.ftl
@@ -2266,6 +2266,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Разрешить расчленение
+    .angstroms = Ангстремы
+    .astronomical-units = Астрономические единицы
+    .behavior = Поведение
+    .block-already-exists-will-redefine-upon-ok = Блок "__ocs_fmt_0__" уже существует — будет переопределен при нажатии ОК
+    .block-creates-a-block-definition-from-objects-you-select = БЛОК создает определение блока из выбранных объектов.
+    .block-definition = Определение блока
+    .block-name = Имя блока
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        Блок "__ocs_fmt_0__" уже существует.
+        Переопределить его?
+    .block-name-cannot-be-empty = Имя блока не может быть пустым.
+    .block-name-cannot-contain-invalid-chars = Имя блока не может содержать: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Имя блока не может начинаться с '*'.
+    .block-unit-label = Единицы блока:
+    .convert-to-block = Преобразовать в блок
+    .count-objects-selected = __ocs_fmt_0__ объектов выбрано
+    .decameters = Декаметры
+    .decimeters = Дециметры
+    .enter-block-description = Введите описание блока...
+    .gigameters = Гигаметры
+    .hectometers = Гектометры
+    .hyperlink-ellipsis = Гиперссылка...
+    .hyperlink-star = Гиперссылка*
+    .invalid-character-in-block-name = Недопустимый символ '__ocs_fmt_0__' в имени блока (не допускаются \ / : * ? " < > | = `)
+    .light-years = Световые годы
+    .match-block-orientation = Согласовать ориентацию блока
+    .microinches = Микродюймы
+    .microns = Микроны
+    .mils = Милы
+    .nanometers = Нанометры
+    .no-objects-selected = Объекты не выбраны
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Объекты не выбраны. Необходимо выбрать объекты для создания блока.
+    .objects-title-case = Объекты
+    .parsecs = Парсеки
+    .pick-point = Указать точку
+    .retain = Оставить
+    .scale-uniformly = Одинаковые масштабы
+    .specify-on-screen = Указать на экране
+    .to-layout = с листом
+    .us-survey-feet = Геодезические футы США
 errors =
     .save-warning = Спасти предостережение
     .unable-to-save-drawing = Не удалось сохранить чертёж
@@ -3749,6 +3790,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Выберите объекты:
+    .block-specify-insertion-base-point = BLOCK  Укажите базовую точку вставки:
 model =
     .create = Создание
     .boolean = Булевы операции
diff --git a/locales/tr-TR/opencadstudio.ftl b/locales/tr-TR/opencadstudio.ftl
index 698cb575a..c90d1ccdc 100644
--- a/locales/tr-TR/opencadstudio.ftl
+++ b/locales/tr-TR/opencadstudio.ftl
@@ -2247,6 +2247,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = Dağıtmaya izin ver
+    .angstroms = Angstrom
+    .astronomical-units = Astronomik Birimler
+    .behavior = Davranış
+    .block-already-exists-will-redefine-upon-ok = "__ocs_fmt_0__" bloğu zaten mevcut — Tamam'da yeniden tanımlanacak
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK, seçtiğiniz nesnelerden bir blok tanımı oluşturur.
+    .block-definition = Blok Tanımı
+    .block-name = Blok adı
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        "__ocs_fmt_0__" bloğu zaten var.
+        Yeniden tanımlamak istiyor musunuz?
+    .block-name-cannot-be-empty = Blok adı boş olamaz.
+    .block-name-cannot-contain-invalid-chars = Blok adı şunları içeremez: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = Blok adı '*' ile başlayamaz.
+    .block-unit-label = Blok birimi:
+    .convert-to-block = Bloğa dönüştür
+    .count-objects-selected = __ocs_fmt_0__ nesne seçildi
+    .decameters = Dekametre
+    .decimeters = Desimetre
+    .enter-block-description = Blok açıklamasını girin...
+    .gigameters = Gigametre
+    .hectometers = Hektometre
+    .hyperlink-ellipsis = Köprü...
+    .hyperlink-star = Köprü*
+    .invalid-character-in-block-name = Blok adında geçersiz karakter '__ocs_fmt_0__' (\ / : * ? " < > | = ` kullanılamaz)
+    .light-years = Işık Yılı
+    .match-block-orientation = Blok yönünü eşle
+    .microinches = Mikroinç
+    .microns = Mikron
+    .mils = Mil
+    .nanometers = Nanometre
+    .no-objects-selected = Nesne seçilmedi
+    .no-objects-selected-you-must-select-objects-to-define-a-block = Nesne seçilmedi. Bir blok tanımlamak için nesneleri seçmelisiniz.
+    .objects-title-case = Nesneler
+    .parsecs = Parsek
+    .pick-point = Nokta seç
+    .retain = Koru
+    .scale-uniformly = Eşit ölçekle
+    .specify-on-screen = Ekranda Belirt
+    .to-layout = düzene
+    .us-survey-feet = ABD Ölçüm Fiti
 errors =
     .save-warning = Kaydetme Uyarısı
     .unable-to-save-drawing = Çizim Kaydedilemiyor
@@ -3708,6 +3749,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  Nesneleri seçin:
+    .block-specify-insertion-base-point = BLOCK  Ekleme taban noktasını belirtin:
 model =
     .create = Oluştur
     .boolean = Boole işlemleri
diff --git a/locales/zh-CN/opencadstudio.ftl b/locales/zh-CN/opencadstudio.ftl
index 730334f4b..394585e0c 100644
--- a/locales/zh-CN/opencadstudio.ftl
+++ b/locales/zh-CN/opencadstudio.ftl
@@ -2250,6 +2250,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = 允许分解
+    .angstroms = 埃
+    .astronomical-units = 天文单位
+    .behavior = 行为
+    .block-already-exists-will-redefine-upon-ok = 块“__ocs_fmt_0__”已存在 — 单击确定后将重新定义
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK 从选定的对象创建块定义。
+    .block-definition = 块定义
+    .block-name = 块名称
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        块“__ocs_fmt_0__”已存在。
+        是否要重新定义?
+    .block-name-cannot-be-empty = 块名称不能为空。
+    .block-name-cannot-contain-invalid-chars = 块名称不能包含: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = 块名称不能以“*”开头。
+    .block-unit-label = 块单位:
+    .convert-to-block = 转换为块
+    .count-objects-selected = 已选择 __ocs_fmt_0__ 个对象
+    .decameters = 十米
+    .decimeters = 分米
+    .enter-block-description = 输入块说明...
+    .gigameters = 吉米
+    .hectometers = 百米
+    .hyperlink-ellipsis = 超链接...
+    .hyperlink-star = 超链接*
+    .invalid-character-in-block-name = 块名称中包含无效字符“__ocs_fmt_0__”（不允许包含 \ / : * ? " < > | = `）
+    .light-years = 光年
+    .match-block-orientation = 使块方向与布局匹配
+    .microinches = 微英寸
+    .microns = 微米
+    .mils = 密尔
+    .nanometers = 纳米
+    .no-objects-selected = 未选择对象
+    .no-objects-selected-you-must-select-objects-to-define-a-block = 未选择对象。必须选择对象才能定义块。
+    .objects-title-case = 对象
+    .parsecs = 秒差距
+    .pick-point = 拾取点
+    .retain = 保留
+    .scale-uniformly = 按比例缩放
+    .specify-on-screen = 在屏幕上指定
+    .to-layout = 匹配到布局
+    .us-survey-feet = 美国测量英尺
 errors =
     .save-warning = 保存警告
     .unable-to-save-drawing = 无法保存图形
@@ -3731,6 +3772,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  选择对象:
+    .block-specify-insertion-base-point = BLOCK  指定插入基点:
 model =
     .create = 创建
     .boolean = 布尔运算
diff --git a/locales/zh-TW/opencadstudio.ftl b/locales/zh-TW/opencadstudio.ftl
index 3d9e872d6..c98dea1d6 100644
--- a/locales/zh-TW/opencadstudio.ftl
+++ b/locales/zh-TW/opencadstudio.ftl
@@ -2262,6 +2262,47 @@ common =
     .row-s-skipped-duplicate-parameter-name = __ocs_fmt_0__ row(s) skipped: duplicate parameter name.
     .surface-s-cannot-be-thickened-because-the-offset-intersects-itself = __ocs_fmt_0__ surface(s) cannot be thickened because the offset intersects itself.
     .conflicting = ⚠ __ocs_fmt_0__ conflicting
+    .allow-exploding = 允許分解
+    .angstroms = 埃
+    .astronomical-units = 天文單位
+    .behavior = 行為
+    .block-already-exists-will-redefine-upon-ok = 區塊「__ocs_fmt_0__」已存在 — 按確定後將重新定義
+    .block-creates-a-block-definition-from-objects-you-select = BLOCK 從選取的物件建立區塊定義。
+    .block-definition = 區塊定義
+    .block-name = 區塊名稱
+    .block-name-already-exists-do-you-want-to-redefine-it =
+        區塊「__ocs_fmt_0__」已存在。
+        是否重新定義？
+    .block-name-cannot-be-empty = 區塊名稱不可為空白。
+    .block-name-cannot-contain-invalid-chars = 區塊名稱不可包含: \ / : * ? " < > | = `
+    .block-name-cannot-start-with-star = 區塊名稱不可開頭為 '*'。
+    .block-unit-label = 區塊單位:
+    .convert-to-block = 轉換為區塊
+    .count-objects-selected = 已選取 __ocs_fmt_0__ 個物件
+    .decameters = 公丈
+    .decimeters = 公寸
+    .enter-block-description = 輸入區塊說明...
+    .gigameters = 百萬公里
+    .hectometers = 公引
+    .hyperlink-ellipsis = 超連結...
+    .hyperlink-star = 超連結*
+    .invalid-character-in-block-name = 區塊名稱包含無效字元「__ocs_fmt_0__」（不允許使用 \ / : * ? " < > | = `）
+    .light-years = 光年
+    .match-block-orientation = 配合配置調整區塊方位
+    .microinches = 微英吋
+    .microns = 微米
+    .mils = 密耳
+    .nanometers = 奈米
+    .no-objects-selected = 未選取物件
+    .no-objects-selected-you-must-select-objects-to-define-a-block = 未選取物件。您必須選取物件以定義區塊。
+    .objects-title-case = 物件
+    .parsecs = 秒差距
+    .pick-point = 點選點
+    .retain = 保留
+    .scale-uniformly = 等比例調整
+    .specify-on-screen = 在螢幕上指定
+    .to-layout = 與配置相符
+    .us-survey-feet = 美國測量英呎
 errors =
     .save-warning = 儲存警告
     .unable-to-save-drawing = 無法儲存圖形
@@ -3743,6 +3784,8 @@ insert =
     .xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner = XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):
     .xopen-opening = XOPEN: opening "__ocs_fmt_0__".
     .xref = XREF: __ocs_fmt_0__
+    .block-select-objects = BLOCK  選取物件:
+    .block-specify-insertion-base-point = BLOCK  指定插入基準點:
 model =
     .create = 建立
     .boolean = 布林運算
diff --git a/src/locale_catalog.rs b/src/locale_catalog.rs
index db5c7f379..5622e2d70 100644
--- a/src/locale_catalog.rs
+++ b/src/locale_catalog.rs
@@ -5178,6 +5178,47 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Mid Between 2 Points" => Some(("ui", "mid-between-2-points")),
         "Osnap Settings..." => Some(("ui", "osnap-settings")),
         "Snap override: None (next pick only)." => Some(("ui", "snap-override-none-next-pick-only")),
+        "Allow exploding" => Some(("common", "allow-exploding")),
+        "Angstroms" => Some(("common", "angstroms")),
+        "Astronomical Units" => Some(("common", "astronomical-units")),
+        "BLOCK  Select objects:" => Some(("insert", "block-select-objects")),
+        "BLOCK  Specify insertion base point:" => Some(("insert", "block-specify-insertion-base-point")),
+        "BLOCK creates a block definition from objects you select." => Some(("common", "block-creates-a-block-definition-from-objects-you-select")),
+        "Behavior" => Some(("common", "behavior")),
+        "Block \"{name}\" already exists.\nDo you want to redefine it?" => Some(("common", "block-name-already-exists-do-you-want-to-redefine-it")),
+        "Block \"{}\" already exists — will redefine upon OK" => Some(("common", "block-already-exists-will-redefine-upon-ok")),
+        "Block Definition" => Some(("common", "block-definition")),
+        "Block name" => Some(("common", "block-name")),
+        "Block name cannot be empty." => Some(("common", "block-name-cannot-be-empty")),
+        "Block name cannot contain: \\ / : * ? \" < > | = `" => Some(("common", "block-name-cannot-contain-invalid-chars")),
+        "Block name cannot start with '*'." => Some(("common", "block-name-cannot-start-with-star")),
+        "Block unit:" => Some(("common", "block-unit-label")),
+        "Convert to block" => Some(("common", "convert-to-block")),
+        "Decameters" => Some(("common", "decameters")),
+        "Decimeters" => Some(("common", "decimeters")),
+        "Enter block description..." => Some(("common", "enter-block-description")),
+        "Gigameters" => Some(("common", "gigameters")),
+        "Hectometers" => Some(("common", "hectometers")),
+        "Hyperlink*" => Some(("common", "hyperlink-star")),
+        "Hyperlink..." => Some(("common", "hyperlink-ellipsis")),
+        "Invalid character '{invalid_char}' in block name (\\ / : * ? \" < > | = ` are not allowed)" => Some(("common", "invalid-character-in-block-name")),
+        "Light Years" => Some(("common", "light-years")),
+        "Match block orientation" => Some(("common", "match-block-orientation")),
+        "Microinches" => Some(("common", "microinches")),
+        "Microns" => Some(("common", "microns")),
+        "Mils" => Some(("common", "mils")),
+        "Nanometers" => Some(("common", "nanometers")),
+        "No objects selected" => Some(("common", "no-objects-selected")),
+        "No objects selected. You must select objects to define a block." => Some(("common", "no-objects-selected-you-must-select-objects-to-define-a-block")),
+        "Objects" => Some(("common", "objects-title-case")),
+        "Parsecs" => Some(("common", "parsecs")),
+        "Pick point" => Some(("common", "pick-point")),
+        "Retain" => Some(("common", "retain")),
+        "Scale uniformly" => Some(("common", "scale-uniformly")),
+        "Specify On-screen" => Some(("common", "specify-on-screen")),
+        "US Survey Feet" => Some(("common", "us-survey-feet")),
+        "to layout" => Some(("common", "to-layout")),
+        "{count} objects selected" => Some(("common", "count-objects-selected")),
         _ => None,
     }
 }
diff --git a/src/ui/window/block_definition.rs b/src/ui/window/block_definition.rs
index 5894eecfb..126f44321 100644
--- a/src/ui/window/block_definition.rs
+++ b/src/ui/window/block_definition.rs
@@ -72,6 +72,7 @@ pub struct BlockDefinitionState {
     pub hyperlink_desc: String,
     pub error_message: Option<String>,
     pub confirm_redefine: Option<String>,
+    pub desc_placeholder: String,
 }
 
 impl Clone for BlockDefinitionState {
@@ -98,6 +99,7 @@ impl Clone for BlockDefinitionState {
             hyperlink_desc: self.hyperlink_desc.clone(),
             error_message: self.error_message.clone(),
             confirm_redefine: self.confirm_redefine.clone(),
+            desc_placeholder: self.desc_placeholder.clone(),
         }
     }
 }
@@ -126,6 +128,7 @@ impl BlockDefinitionState {
             hyperlink_desc: String::new(),
             error_message: None,
             confirm_redefine: None,
+            desc_placeholder: crate::t!("Enter block description...").into_owned(),
         }
     }
 
@@ -532,7 +535,7 @@ pub fn view_window<'a>(
     // ── Group: Description (Column 2 Bottom) ──────────────────────────────────
     let desc_editor = text_editor(&state.description_content)
         .on_action(Message::BlockDefDescriptionAction)
-        .placeholder("Enter block description...")
+        .placeholder(&state.desc_placeholder)
         .size(11)
         .padding([4, 6])
         .height(Fill)