1b-agent/OneCAD-Draft
1
0 Fork 0
forked from 1b-agent/opencadstudio-upstream
Code Pull Requests Activity

Merge main into codex/graphic-attributes-cleanup

Browse Source 
Conflicts were additions on both sides, kept together: the Count palette
and Sheet Set toggles next to the Graphic Attributes toggle in the ribbon,
main's new locale groups and catalog entries next to graphic-attributes,
and module declarations. The palette code follows main's crate renames
(acadrust -> codec, cadkernel -> kernel).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
This commit is contained in:
Claude committed 2026-10-07 20:11:05 +00:00
2 parents 32ed58fe77 1bf584a1c1
commit 7a03e1c43c
625 files changed
+104397 -28053
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

locales/ru-RU/opencadstudio.ftl
+559 -22
View File
@@ -809,7 +809,7 @@ common =
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
.slice-retained-update-failed = SLICE: a retained result could not be updated.
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: проведите сплин через точки __ocs_fmt_0__.
.splinefit-need-at-least-3-points = SPLINEFIT: необходимо не менее 3 баллов.
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: выберите полилин, чтобы соответствовать сплину.
@@ -1141,6 +1141,10 @@ common =
.opened-drawing-but-recent-copy-could-not-be-stored = Чертёж открыт, но не удалось сохранить недавнюю копию: __ocs_fmt_0__
.select-pdf-underlay = { draw.select }: PDF · { properties.underlay }
.pdf-files = { common.files } (PDF)
.dwf-files = DWF Files
.dgn-files = DGN Files
.select-dwf-file = Select DWF File
.select-dgn-file = Select DGN File
.pdfattach = PDFATTACH: __ocs_fmt_0__
.select-external-reference-file = { draw.select } · { properties.external-reference } · { common.files }
.cad-files = { common.files } (CAD)
@@ -1427,7 +1431,8 @@ common =
.prompt-lines = Строки запроса
.temporary-prompt-lines-shown-above-the-command-window-clipromptlines = Временные строки запроса над окном команд (CLIPROMPTLINES).
.history-fade-time = Время затухания журнала
.how-long-overlay-history-lines-stay-visible-0-skips-them-commandlinefadetime = Как долго строки журнала остаются видимыми; 0 их пропускает (COMMANDLINEFADETIME).
.how-long-overlay-history-lines-stay-visible-0-never-fades-commandlinefadetime = Как долго строки журнала остаются видимыми; при 0 они никогда не скрываются (COMMANDLINEFADETIME).
.never = Никогда
.clicking-overlapping-objects-opens-a-picker = Щелчок по перекрывающимся объектам открывает список выбора
.block-edit = Редактирование блока
.double-click-to-edit-block-in-place-refedit = Двойной щелчок редактирует блок на месте (REFEDIT)
@@ -1502,6 +1507,8 @@ common =
.value-1-layout-selected = Выбран 1 лист
.layouts-selected = выбранных листов
.pdf = PDF
.dwf = DWF
.dgn = DGN
.select-the-layouts-to-output-each-page-is-printed-in-layout-mode = Выберите листы для вывода. Каждая страница печатается в режиме листа.
.select-all-1fc9a3 = { common.select-all }
.select-none = { draw.select }: { common.none-title-case }
@@ -1515,10 +1522,10 @@ common =
.are-you-sure-you-want-to-reset-you-will-lose-all-your-current-shortcuts = Сбросить настройки? Все текущие сочетания клавиш будут потеряны!
.yes-reset = { common.yes }, { common.reset }
.reset-to-default = { common.reset } · { common.default-title-case }
.apply-exit = { common.apply } && { draw.sketch-exit }
.apply-exit = { common.apply } & { draw.sketch-exit }
.shortcut-already-used-for-command = Сочетание уже используется для команды: __ocs_fmt_0__ → __ocs_fmt_1__
.unsaved-changes-will-be-discarded = Несохранённые изменения будут потеряны.
.discard-close = { common.discard } && { action.close }
.discard-close = { common.discard } & { action.close }
.keep-editing = { common.continue } · { layers.edit }
.mcp-control-is-off = Управление MCP выключено
.mcp-is-handling-a-request = MCP обрабатывает запрос
@@ -1908,8 +1915,8 @@ common =
.choose-at-least-one-output = Choose at least one output.
.data-extraction-settings = Data Extraction Settings
.add-drawings = Add Drawings
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
.add-parameter = + Add parameter
.object-snap-3d = 3D Object Snap
.object-snap-on-f4-3d = 3D Object Snap On (F4)
@@ -2030,9 +2037,9 @@ common =
.grid-y-spacing = Grid Y spacing:
.grid-behavior = Grid behavior
.grid-spacing = Grid spacing
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
@@ -2156,7 +2163,7 @@ common =
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
@@ -2241,7 +2248,7 @@ common =
.trims = Trims
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
.u-isolines-2 = U isolines
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
@@ -2317,6 +2324,27 @@ common =
.wblock-err-no-path = Укажите имя файла и путь к нему.
.wblock-err-current-drawing = Невозможно записать в текущий файл чертежа.
.wblock-help-info = WBLOCK записывает объекты, блок или весь чертеж в новый файл чертежа.
.blank-drawing = Пустой чертёж
.default-template-new-drawings = Шаблон по умолчанию для новых чертежей
.fillet-trim-mode-trim = FILLET Enter Trim mode option [Trim/No trim] <Trim>:
.fillet-trim-mode-no-trim = FILLET Enter Trim mode option [Trim/No trim] <No trim>:
.linetype-files = Файлы типов линий
.load-linetypes = Загрузить типы линий
.requires-two-positive-values = Требуются два положительных значения (x,y) или одно для обоих.
.snap-marker-color = Цвет маркера привязки
.command-line-text-color = Цвет текста командной строки
.operand = Операнд
.linetypes-loaded = Загружено типов линий: __ocs_fmt_0__.
.geometric-center-snap = Геометрический центр
.no-trim-option = Без обрезки
.chspace-model-tab = CHSPACE: команда недоступна на вкладке «Модель».
.chspace-no-viewport = CHSPACE: нет видового экрана в плане для смены пространства.
.chspace-to-paper = CHSPACE: перенесено в пространство листа объектов: __ocs_fmt_0__.
.chspace-to-model = CHSPACE: перенесено в пространство модели объектов: __ocs_fmt_0__.
.select-template-title = Выбор шаблона
.threedrotate-specify-base-point-count-objects = 3DROTATE Укажите базовую точку [__ocs_arg_count__ объекты]:
.threedrotate-specify-rotation-axis = 3DROTATE Укажите ось поворота [X/Y/Z] или вторую точку на ней <Z>:
.threedrotate-specify-rotation-angle-a = 3DROTATE Укажите угол поворота <__ocs_arg_a__>
errors =
.save-warning = Спасти предостережение
.unable-to-save-drawing = Не удалось сохранить чертёж
@@ -3020,6 +3048,8 @@ modify =
.offset-n-click-through-point-or-multiple = OFFSET__ocs_arg_n__ Нажмите на точку или [Множественное число]:
.offset-n-multiple-click-next-side-distance-d = OFFSET__ocs_arg_n__ Несколько кликов на следующую сторону [расстояние __ocs_arg_d__]:
.offset-n-multiple-click-next-through-point = OFFSET__ocs_arg_n__ Несколько кликов по следующей точке:
.offset-n-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Укажите точку прохождения или введите расстояние, отрицательное для другой стороны [Multiple/Erase/Layer] <__ocs_arg_d__>:
.offset-n-multiple-click-through-point-or-type-distance = OFFSET__ocs_arg_n__ Несколько Укажите точку прохождения или введите расстояние, отрицательное для другой стороны [Erase/Layer] <__ocs_arg_d__>:
.offset-dimexo = Отступ от объекта (DIMEXO)
.overall-scale-dimscale = Общий масштаб (DIMSCALE)
.pedit-enter-option = PEDIT Введите опцию:
@@ -3254,6 +3284,7 @@ layers =
.usage-view-list-view-save-name-view-restore-na = Использование: VIEW LIST | VIEW SAVE <name> | VIEW RESTORE <name> | VIEW DELETE <name>
.usage-view-restore-name = Использование: VIEW RESTORE <name>
.usage-view-save-name = Использование: VIEW SAVE <name>
.usage-view-window = Usage: VIEW WINDOW <name> <x1,y1> <x2,y2>
.usage-prefix-font-style-font-file = Использование: __ocs_fmt_0__ FONT <style> <font_file>
.usage-prefix-list-new-name-font-style-file-wid = Использование: __ocs_fmt_0__ LIST | NEW <name> | FONT <style> <file> | WIDTH <style> <factor> | OBLIQUE <style> <angle>
.usage-prefix-new-name = Использование: __ocs_fmt_0__ NEW <name>
@@ -3509,6 +3540,107 @@ annotate =
.tolerance-specify-insertion-point = TOLERANCE Укажите точку вставки:
insert =
.pdfui-pdf-scale = PDF scale: __ocs_fmt_0__:1
.pdfui-specify-insertion-point = Specify insertion point:
.pdfui-no-pdf-underlays = No PDF underlays found.
.pdfui-imports-the-geometry-fills-raster-images-and-text-of-a-pdf-f = Imports the geometry, fills, raster images and text of a PDF file as drawing objects.
.pdfui-turns-the-layers-of-a-pdf-underlay-on-or-off = Turns the layers of a PDF underlay on or off.
.pdfui-attaches-a-pdf-file-as-an-underlay = Attaches a PDF file as an underlay.
.pdfui-rotation = Rotation:
.pdfui-scale = Scale:
.pdfui-specify-insertion-point-on-screen = Specify insertion point on-screen
.pdfui-page-size-size = Page size: __ocs_fmt_0__
.pdfui-total-count = Total: __ocs_fmt_0__
.pdfui-pages = Pages
.pdfui-placement = Placement
.pdfui-on-screen = On screen
.pdfui-file-details = File details
.pdfui-page-count = __ocs_fmt_0__ pages
.pdfui-selected-pages = Selected pages: __ocs_fmt_0__
.pdfui-layer-summary = __ocs_fmt_0__ layers, __ocs_fmt_1__ hidden
.pdfui-page = Page:
.pdfui-page-to-import = Page to import
.pdfui-infer-linetypes-from-collinear-dashes = Infer linetypes from collinear dashes
.pdfui-apply-lineweight-properties = Apply lineweight properties
.pdfui-convert-solid-fills-to-hatches = Convert solid fills to hatches
.pdfui-join-line-and-arc-segments = Join line and arc segments
.pdfui-import-as-block = Import as block
.pdfui-import-options = Import options
.pdfui-create-object-layers = Create object layers
.pdfui-use-pdf-layers = Use PDF layers
.pdfui-raster-images = Raster images
.pdfui-truetype-text = TrueType text
.pdfui-solid-fills = Solid fills
.pdfui-vector-geometry = Vector geometry
.pdfui-pdf-data-to-import = PDF data to import
.pdfui-select-an-underlay-to-view-its-layers = Select an underlay to view its layers.
.pdfui-this-file-does-not-contain-any-layers = This file does not contain any layers
.pdfui-search-for-layer = Search for layer
.pdfui-reference-name = Reference name:
.pdfui-page-size = Page size:
.ul-attach-underlay = Attach Underlay
.ul-attach-dwf = Attach DWF
.ul-attach-dgn = Attach DGN
.ul-attach-dwf-underlay = Attach DWF Underlay
.ul-attach-dgn-underlay = Attach DGN Underlay
.ul-sheet-count = __ocs_fmt_0__ sheets
.ul-model-count = __ocs_fmt_0__ models
.ul-sheets = Sheets
.ul-models = Models
.ul-selected-sheet = Selected sheet: __ocs_fmt_0__
.ul-selected-model = Selected model: __ocs_fmt_0__
.ul-sheet-size = Sheet size:
.ul-model-size = Model size:
.ul-conversion-units = Conversion units
.ul-master-units = Master units
.ul-sub-units = Sub units
.ul-sub-units-scale = Sub units make the default scale __ocs_fmt_0__
.ul-attaches-dwf = Attaches a DWF or DWFx file as an underlay.
.ul-attaches-dgn = Attaches a DGN file as an underlay.
.pdfui-select-one-or-more-pages-from-the-pdf-file = Select one or more pages from the PDF file:
.pdfui-import-pdf = Import PDF
.pdfui-pdf-import-settings = PDF Import Settings
.pdfui-underlay-layers = Underlay Layers
.pdfui-attach-pdf-underlay = Attach PDF Underlay
.pdfui-pdf-import = PDF Import
.pdfui-pdf-layers = PDF Layers
.pdfui-import-as-objects =
Import As
Objects
.pdfui-edit-layers =
Edit
Layers
.pdfui-external-references =
External
References
.pdfui-enable-snap =
Enable
Snap
.pdfui-show-underlay =
Show
Underlay
.pdfui-remove-clipping =
Remove
Clipping
.pdfui-create-clipping-boundary =
Create Clipping
Boundary
.pdfui-display-in-monochrome =
Display in
Monochrome
.select-pdf-file = Select PDF File
.refui-requires-int-90 = Requires an integer between -90 and 90.
.refui-xref-fading = Xref fading
.refui-edit-reference = Edit Reference
.refui-edit-reference-in-place =
Edit Reference
In-Place
.refui-open-reference =
Open
Reference
.refui-snap-to-underlays-off = Snap to Underlays OFF
.refui-snap-to-underlays-on = Snap to Underlays ON
.refui-snap-to-underlays = Snap to Underlays
.xref-attach-dialog-title = Attach External Reference
.xref-attach-browse = Browse...
.xref-attach-reference-type = Reference Type
@@ -3574,6 +3706,12 @@ insert =
.frames-print = Frames & Print (недоступная ссылка)
.frames-off = Снятие рам
.frames-on = В кадрах
.hide-frames = Hide frames
.display-and-plot-frames = Display and plot frames
.display-not-plot-frames = Display but don't plot frames
.frames-vary = *Frames vary*
.regenerating-model = Regenerating model.
.requires-int-0-2 = Requires an integer between 0 and 2.
.insert-prompt-hint = INSERT __ocs_arg_prompt____ocs_arg_hint__:
.insert-enter-block-name-hint = INSERT Введите имя блока: __ocs_arg_hint__
.insert-filling-attributes = INSERT Наполнение атрибутов...
@@ -3710,6 +3848,9 @@ insert =
.xref-old-path-prefix = старый префикс пути
.xref-attach-dwg = Attach DWG
.xref-attach-image = Attach Image
.select-images = Select image(s):
.transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
.transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
.xref-attach-menu = Attach...
.xref-change-path-type = Change Path Type
.xref-find-and-replace-menu = Find and Replace...
@@ -3746,13 +3887,19 @@ insert =
.sweep-select-sweep-path-or-alignment-base-point-scale-twist = SWEEP { draw.select }: { model.sweep } · { common.path } [{ common.alignment-title-case }/{ styles.basepoint }/{ common.scale }/{ properties.twist }]:
.sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
.sweep-specify-base-point = SWEEP Укажите базовую точку:
.sweep-enter-scale-factor-or-reference = SWEEP { common.specify }: { style-manager.scale-factor } [{ common.reference }]:
.sweep-specify-reference-length-or-first-point = SWEEP { common.specify }: { common.reference-length } · { draw.first-point }:
.sweep-specify-second-reference-point = SWEEP Укажите вторую точку отсчета:
.sweep-specify-new-length-or-points = SWEEP { common.specify }: { common.new-length } [{ common.points }]:
.sweep-specify-first-point-of-new-length = SWEEP { common.specify }: { common.new-length } · { draw.first-point }:
.sweep-specify-second-point-of-new-length = SWEEP { common.specify }: { common.new-length } · { model.second-point }:
.sweep-specify-twist-angle-or-bank = SWEEP { common.specify }: { properties.twist } · { common.angle } [{ common.bank }]:
.sweep-enter-scale-factor-or-reference = SWEEP { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
.sweep-specify-twist-angle-or-bank = SWEEP { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
.sweep-enter-expression = SWEEP Введите выражение:
.sweep-specify-start-reference-length = SWEEP Укажите начальную опорную длину
.sweep-specify-end-reference-length = SWEEP Укажите конечную опорную длину
.sweep-specify-second-point = SWEEP Укажите вторую точку:
.sweep-expression-invalid = Неверный синтаксис или переменная не определена. Повторите ввод выражения или значения.
.sweep-modeling-operation-error = Ошибка операции моделирования:
.sweep-error-code-number = Номер кода ошибки: __ocs_fmt_0__
.sweep-unable-to-sweep-selected-objects = Невозможно выполнить сдвиг для выбранных объектов: __ocs_fmt_0__.
.sweep-scale-closed-path = Нельзя использовать масштаб, если кривая траектории замкнута.
.sweep-scale-smooth-path = При использовании масштаба кривая траектории должна быть гладкой.
.sweep-path-curve-not-valid = Выбранная кривая траектории недопустима.
.point-cross-sections-are-allowed-only-at-the-first-or-last-end-with-a-curve-between-p = Точечные сечения допустимы только в начале или конце; между точечными концами должна быть кривая.
.loft-requires-at-least-two-cross-sections = LOFT требует не менее двух сечений.
.a-closed-loft-requires-at-least-three-curve-cross-sections-and-no-point-ends = Замкнутое тело по сечениям требует не менее трёх кривых сечений без точечных концов.
@@ -3824,6 +3971,186 @@ insert =
.block-select-objects = BLOCK Выберите объекты:
.block-specify-insertion-base-point = BLOCK Укажите базовую точку вставки:
.wblock-specify-insertion-base-point = WBLOCK Укажите базовую точку вставки:
.ul-attach-point-cloud = Attach Point Cloud
.pc-rect-crop =
Rectangular
Crop
.pc-poly-crop =
Polygonal
Crop
.pc-circ-crop =
Circular
Crop
.pc-show-crop =
Show
Cropping
.pc-invert-crop =
Invert
Cropping
.pc-uncrop =
Remove All
Cropping
.pc-data = Data:
.pc-size = Size:
.pc-unit = Unit:
.pc-options = Options
.pc-geo = Use geographic location
.pc-lock = Lock point cloud
.pc-zoom = Zoom to point cloud
.pc-scan-count = __ocs_fmt_0__ scans
.pc-point-count = __ocs_fmt_0__ points
.pc-select-file = Select Point Cloud File
.pc-rcp = Point Cloud Project
.pc-rcs = Point Cloud Scan
.pc-clouds = Point Clouds
.pc-help = Attaches a point cloud scan or project.
.pcm-title = Point Cloud Color Map
.pcm-ramp = Color ramp
.pcm-count = Number of colors
.pcm-gradient = Display as gradient
.pcm-range = Range of colorized points
.pcm-max-int = Maximum intensity
.pcm-min-int = Minimum intensity
.pcm-max-elev = Maximum elevation
.pcm-min-elev = Minimum elevation
.pcm-interval = Interval height
.pcm-extents = Apply to extents of point cloud
.pcm-oor = Out of range points
.pcm-oor-minmax = Use min/max colors
.pcm-oor-scan = Use RGB scan colors
.pcm-oor-hide = Hide points
.pcm-current = Make stylization current
.pcm-name-taken = A color scheme with this name already exists.
.pcm-bad-range = Invalid range of colorized points.
.pcm-help = Sets the color schemes and ranges a point cloud is colored by intensity or elevation.
.pc-manager = Point Cloud Manager
.pc-regions-scans = REGIONS AND SCANS
.pc-regions = Regions
.pc-unassigned = Unassigned Points
.pc-scans = Scans
.pc-search = Search
.pc-collapse-all = Collapse all
.pc-expand-all = Expand all
.pcm-scheme-name = Scheme name
.pcs-title = Extract Section Lines from Point Cloud
.pcs-extract = Extract
.pcs-entire = Entire cross section
.pcs-perimeter = Perimeter only
.pcs-max-points = Maximum points to process
.pcs-faster = Faster
.pcs-accurate = More accurate
.pcs-time = Estimated time: __ocs_fmt_0__ minutes
.pcs-output = Output geometry
.pcs-polylines = 2D Polylines
.pcs-width = Polyline width
.pcs-tolerances = Extraction tolerances
.pcs-min-length = Minimum line length
.pcs-connect = Connect lines tolerance
.pcs-angle = Collinear angle tolerance
.pcs-preview = Preview result
.pcs-use-current = Use Current
.pcs-positive = Requires a positive number.
.pcs-positive-int = Requires a positive integer.
.pcs-help = Traces the points on the kept side of a live section as lines.
.bp-add-favorite = Add to Favorites
.bp-annotative-dynamic = Annotative / Dynamic
.bp-auto-placement = Auto-Placement
.bp-gallery-libraries = Blocks from Libraries...
.bp-choose-library = Choose a library folder with …
.bp-tab-current = Current Drawing
.bp-heading-current = Current Drawing Blocks
.bp-view-xl = Extra Large Icons
.bp-heading-favorites = Favorite Blocks
.bp-gallery-favorites = Favorite Blocks...
.bp-tab-favorites = Favorites
.bp-filter = Filter... (* ? wildcards)
.bp-icon = Icon
.bp-insertion-point = Insertion Point
.bp-view-large = Large Icons
.bp-tab-libraries = Libraries
.bp-heading-libraries = Library Blocks
.bp-view-medium = Medium Icons
.bp-tab-recent = Recent
.bp-heading-recent = Recent Blocks
.bp-gallery-recent = Recent Blocks...
.bp-redefine = Redefine
.bp-remove-block = Remove Block
.bp-remove-favorite = Remove from Favorites
.bp-remove-list = Remove from List
.bp-repeat-placement = Repeat Placement
.bp-select-library = Select a Block Library Folder
.bp-view-small = Small Icons
.bp-on-screen = specified on screen
.bp-block-not-found = Block "__ocs_fmt_0__" not found.
.bp-block-redefined = Block "__ocs_fmt_0__" redefined.
.bp-block-no-reference = Block "__ocs_fmt_0__" has no reference in the drawing to edit.
.bp-block-referenced = Block "__ocs_fmt_0__" is referenced in the drawing and cannot be removed.
.bp-block-removed = Block "__ocs_fmt_0__" removed.
.attdef-on-screen = Specify on-screen
.attdef-insertion-point = Insertion Point
.attdef-insert-field = Insert field
.attdef-text-settings = Text Settings
.attdef-align-below = Align below previous attribute definition
.attdef-define = Define
.attdef-edit-title = Edit Attribute Definition
.attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
.attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
.attdef-define-attributes = Define Attributes
.attdef-manage-attributes = Manage Attributes
.attdef-set-base-point = Set Base Point
.attdef-attmode-retain = Retain Attribute Display
.attdef-attmode-all = Display All Attributes
.attdef-attmode-none = Hide All Attributes
.attdef-edit-attribute = Edit Attribute
.attdef-multiline-editor = Multiline editor
.attdef-tag-empty = The tag cannot be empty.
.attdef-tag-spaces = The tag may not contain spaces.
.attdef-positive = Value must be positive and nonzero.
.attdef-angle = Requires valid numeric angle or second point.
.field-title = Field
.field-category = Category
.field-date-format = Date format
.field-examples = Examples
.field-file-extension = Display file extension
.field-filename-only = Filename only
.field-path-only = Path only
.field-path-filename = Path and filename
.field-bytes = Bytes
.field-kilobytes = Kilobytes
.field-megabytes = Megabytes
.field-system-variable = System variable
.field-diesel = Diesel expression
.field-named-type = Named object type
.field-object-type = Object type
.field-select-object = Select object
.field-expression = Field expression
.field-help = Inserts a field: text that updates from the drawing, the date or another source.
.field-average = Average
.field-sum = Sum
.field-object-name = Object name
.field-block-placeholder = Block placeholder
.field-block-editor-only = Only accessible in the block editor
.field-block-reference-property = Block reference property
.field-cat-linked = Linked
.field-current-precision = Current precision
.field-evaluate = Evaluate
.field-text-to-display = Text to display
.field-address = Address
.field-select-link-file = Select a file to link
.field-current-units = Current units
.field-use-scale-name = Use scale name
.field-cat-date = Date & Time
.field-cat-document = Document
.field-cat-other = Other
.field-case-upper = Uppercase
.field-case-lower = Lowercase
.field-case-first = First capital
.field-case-title = Title case
.field-named-dimstyle = Dimstyle
.field-named-tablestyle = Tablestyle
.field-named-textstyle = Textstyle
.field-prop-endpoint = EndPoint
.field-prop-startpoint = StartPoint
model =
.create = Создание
.boolean = Булевы операции
@@ -4051,6 +4378,167 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <слой> = заморозить | T <слой> = разморозить | Enter = выход
view =
.ss-create-sheet-set = Create Sheet Set
.ss-requires-integer-between = Требуется целое число от __ocs_fmt_0__ до __ocs_fmt_1__.
.ss-new-sheet = New Sheet
.ss-subset-properties = Subset Properties
.ss-rename-renumber-sheet = Rename & Renumber Sheet
.ss-import-layout-as-sheet = Import Layout as Sheet
.ss-sheet-set-manager = Sheet Set Manager
.ss-open = Open...
.ss-open-a-sheet-set-or-create-one-with-newsheetset = Open a sheet set or create one with NEWSHEETSET.
.ss-no-sheet-views = No sheet views.
.ss-no-locations = No locations.
.ss-double-click-opens-a-sheet-right-click-for-more-commands = Double-click opens a sheet. Right-click for more commands.
.ss-an-empty-sheet-set = An empty sheet set
.ss-existing-drawings = Existing drawings
.ss-create-a-folder-hierarchy-based-on-subsets = Create a folder hierarchy based on subsets
.ss-sheet-set-properties = Sheet Set Properties...
.ss-select-folders-containing-drawings-layouts-in-the-drawings-c = Select folders containing drawings. Layouts in the drawings can be added to the sheet set.
.ss-sheet-set = Sheet Set
.ss-sheet-set-data-file = Sheet set data file
.ss-sheets-to-import = Sheets to import
.ss-add-custom-property = Add Custom Property...
.ss-new-sheet-x = New Sheet...
.ss-new-subset = New Subset...
.ss-import-layout-as-sheet-x = Import Layout as Sheet...
.ss-rename-renumber = Rename & Renumber...
.ss-close-sheet-set = Close Sheet Set
.ss-properties = Properties...
.ss-sheet-list = Sheet List
.ss-sheet-views = Sheet Views
.ss-model-views = Model Views
.ss-views-by-sheet = Views by sheet
.ss-locations = Locations
.ss-create-a-sheet-set-using = Create a sheet set using
.ss-name-of-new-sheet-set = Name of new sheet set:
.ss-description-optional = Description (optional):
.ss-store-sheet-set-data-file-dst-here = Store sheet set data file (.dst) here:
.ss-choose-layouts = Choose Layouts
.ss-confirm = Confirm
.ss-default-value = Default value:
.ss-owner = Owner
.ss-custom-properties = Custom Properties
.ss-sheet-title = Sheet title
.ss-folder-path = Folder path
.ss-sheet-template = Sheet template
.ss-subset-name = Subset name
.ss-new-sheet-location = New sheet location
.ss-remove-subset = Remove Subset
.ss-rename-subset = Rename Subset...
.ss-content-model-space = Content cannot be placed into model space. Please switch to paper space and try again.
.ss-cannot-read = cannot be read
.ss-rename-renumber-view = Rename & Renumber View
.ss-list-of-blocks = List of Blocks
.ss-select-block = Select Block
.ss-set-category = Set category
.ss-place-callout-block = Place Callout Block
.ss-place-view-label-block = Place View Label Block
.ss-place-on-sheet = Place on Sheet
.ss-see-model-space-views = See Model Space Views
.ss-view-title = View title
.ss-add-x = Add...
.ss-blocks-associated = The following blocks are associated with this sheet set:
.ss-enter-drawing-file-name = Enter the drawing file name:
.ss-enter-drawing-file-name-msg = Enter the drawing file name.
.ss-select-drawing-as-block = Select the drawing file as a block
.ss-choose-blocks-in-drawing = Choose blocks in the drawing file:
.ss-preview = preview
.ss-open-sheet-to-place = Open a sheet of this sheet set at its layout to place a view on it.
.ss-open-view-sheet = Open the view's sheet at its layout to place a block on it.
.ss-no-label-block = The sheet set has no label block for views.
.ss-no-view-to-place = __ocs_fmt_0__: no view to place.
.ss-cannot-be-read = __ocs_fmt_0__: cannot be read.
.ss-layout-already-part = This layout is already part of a sheet set - not available for import.
.ss-layout-may-belong = Warning: this layout may belong to another sheet set.
.ss-status-missing = missing
.ss-status-open = open
.ss-view-by-category = View by category
.ss-view-by-sheet = View by sheet
.ss-import-layouts-as-sheets = Import Layouts as Sheets
.ss-remove-sheets = Remove Sheets
.ss-view-category = View Category
.ss-new-view-category = New View Category...
.ss-add-new-location = Add New Location...
.ss-remove-location = Remove Location
.ss-publish-by-sheet = Publish by Sheet 'Include for Publish' Setting
.ss-do-not-publish-sheets = Do Not Publish Sheets
.ss-open-in-drawing-editor = Open in drawing editor
.ss-create-folder-hierarchy = Create folder hierarchy
.ss-publish-sheets-in-subset = Publish sheets in subset
.ss-rename-options = Rename options
.ss-rename-layout-to-match = Rename layout to match:
.ss-prefix-with-sheet-number = Prefix with sheet number
.ss-rename-drawing-file-to-match = Rename drawing file to match:
.ss-available-for-import = Available for import
.ss-drawings = Drawings
.ss-select-drawing-files-containing-layouts = Select drawing files containing layouts
.ss-browse-for-drawings = Browse for Drawings...
.ss-a-layout-can-belong-to-only-one-sheet-set = A layout can belong to only one sheet set. If a layout already belongs to a sheet set, you must create a copy of the layout to import it.
.ss-prefix-sheet-titles-with-file-name = Prefix sheet titles with file name
.ss-import-checked = Import Checked
.ss-template = Template
.ss-drawing-template-file-name = Drawing template file name
.ss-select-a-layout-to-create-new-sheets = Select a layout to create new sheets
.ss-category-name = Category name
.ss-select-the-callout-blocks = Select the callout blocks to be used in this category
.ss-selected-blocks-will-be-available = Selected blocks will be available for selection when you insert a callout block from the view tab.
.ss-add-blocks = Add Blocks...
.ss-layout-and-drawing-not-deleted = (The layout and the drawing file will not be deleted.)
.ss-remove-sheet-question = Are you sure that you want to remove __ocs_fmt_0__ Sheet from __ocs_fmt_1__ Sheet Set?
.ss-drawing-open-cannot-rename = The drawing is open; close it to rename its file.
.ss-category-name-empty = The category name cannot be empty.
.ss-associate-hyperlink = Associate hyperlink
.ss-remove-sheet = Remove Sheet
.ss-lets-you-specify-one-or-more-folders-containing-drawings-the = Lets you specify one or more folders containing drawings. The layouts from these drawings can be automatically imported into the sheet set.
.ss-creates-a-sheet-set-with-no-subsets-or-sheets = Creates a sheet set with no subsets or sheets.
.ss-open-sheet-set = Open Sheet Set
.ss-sheet-set-dst = Sheet Set (*.dst)
.ss-browse-for-folder = Browse for Folder
.ss-select-layout-as-sheet-template = Select Layout as Sheet Template
.ss-drawing-template-dwt = Drawing Template (*.dwt)
.ss-drawing-dwg = Drawing (*.dwg)
.ss-the-name-cannot-be-empty = The name cannot be empty.
.ss-a-custom-property-with-this-name-already-exists = A custom property with this name already exists.
.ss-sheet-sets-organize-layouts-from-several-drawings-into-one-n = Sheet sets organize layouts from several drawings into one named set of sheets.
.ss-default-new-drawing = (default new drawing)
.ss-select-drawing = Select Drawing
.ss-the-sheet-set-name-cannot-be-empty = The sheet set name cannot be empty.
.ss-the-folder-for-the-sheet-set-data-file-does-not-exist = The folder for the sheet set data file does not exist.
.ss-the-drawing-has-no-layout-to-use-as-a-sheet-template = The drawing has no layout to use as a sheet template.
.ss-the-subset-name-cannot-be-empty = The subset name cannot be empty.
.ss-the-drawing-has-no-layout-to-import = The drawing has no layout to import.
.ss-the-layout-is-already-a-sheet-of-this-sheet-set = The layout is already a sheet of this sheet set.
.ss-the-sheet-title-cannot-be-empty = The sheet title cannot be empty.
.ss-the-sheet-folder-cannot-be-created = The sheet folder cannot be created.
.ss-sheet-set-properties-x = Sheet Set Properties
.ss-sheet-properties = Sheet Properties
.ss-sheet-drawing-not-found = Sheet drawing not found: __ocs_fmt_0__
.ss-already-exists = __ocs_fmt_0__ already exists.
.ss-model-view = Model view
.ss-label-block-for-views = Label block for views
.ss-callout-blocks = Callout blocks
.ss-page-setup-overrides-file = Page setup overrides file
.ss-project-control = Project Control
.ss-sheet-creation = Sheet Creation
.ss-sheet-storage-location = Sheet storage location
.ss-sheet-creation-template = Sheet creation template
.ss-prompt-for-template = Prompt for template
.ss-subset = Subset
.ss-layout-name = Layout name
.ss-drawing-file = Drawing file
.ss-project-number = Project number
.ss-project-name = Project name
.ss-project-phase = Project phase
.ss-project-milestone = Project milestone
.ss-revision-number = Revision number
.ss-revision-date = Revision date
.ss-issue-purpose = Issue purpose
.ss-custom-property-name = Custom property name
.ss-placeholder-type = Placeholder type
.ss-sheet-set-x = Sheet set
.ss-sheet-navigation-tree = Sheet navigation tree
.ss-sheetset = SheetSet
.datalink-specify-insertion-point = DATALINK Укажите точку вставки:
.table-block-definition-not-found = TABLE: определение блока не найдено.
.table-edit-applied = TABLE: изменение применено.
@@ -4172,7 +4660,6 @@ view =
.scalelistedit-add-new-scale-ratio-e-g-1-50 = SCALELISTEDIT ADD Новое соотношение масштаба (например, 1:50):
.scalelistedit-add-use-a-ratio-like-1-50 = SCALELISTEDIT ADD: использовать соотношение 1:50.
.scalelistedit-delete-scale-ratio-to-remove = SCALELISTEDIT DELETE Удаляемое соотношение масштаба:
.sheetset-sheet-set-manager-not-yet-implemented = SHEETSET: Диспетчер наборов листов еще не реализован.
.syncpviewports-master-is-not-a-viewport = SYNCPVIEWPORTS: главный объект не является видовым экраном.
.syncpviewports-synced-n-viewport-s-to-the-mast = SYNCPVIEWPORTS: с главным экраном синхронизировано видовых экранов: __ocs_fmt_0__.
.scale-arg-already-exists = Масштаб __ocs_fmt_0__ уже существует.
@@ -4279,6 +4766,12 @@ view =
.ucs-specify-point-in-positive-xy-plane = UCS { common.specify }: XY · { common.positive-direction } · { common.point }:
properties =
.applied = Applied
.pdf-underlay = PDF Underlay
.dwf-underlay = DWF Underlay
.dgn-underlay = DGN Underlay
.page-number = Page number
.layer-display-overrides = Layer display overrides
.arrowhead-size = Размер стрелки
.attachment = Прикрепление
.chord = Хорда
@@ -4905,6 +5398,15 @@ properties =
.show-history = { properties.show } · { model.history }
.solid-history = { properties.solid } · { model.history }
.solid-type = { properties.solid } · { common.type }
.stylization = Stylization
.color-scheme = Color scheme
.scan-colors = Scan Colors
.object-color = Object Color
.classification = Classification
.show-cropped = Show cropped
.geolocate = Geolocate
.segmentation = Segmentation
.saved-path-lower = Saved path
styles =
.blocks = Блоки: __ocs_fmt_0__
@@ -5016,7 +5518,7 @@ styles =
.isavebak-set-to-1 = ISAVEBAK установленный на 1
.keep-with-dim-line = Оставлять рядом с размерной линией
.layers = Лэйерс
.linetype-list-set = LINETYPE [Список / Задать]:
.linetype-list-set = LINETYPE [Список / Задать / Загрузить]:
.linetype-set-linetype-name-bylayer-byblock = LINETYPE SET Имя типа линии (ByLayer / ByBlock / …):
.linetype-name-is-not-loaded-use-linetype-list = LINETYPE: "__ocs_fmt_0__" не загружен. Используйте LINETYPE LIST для просмотра доступных типов линий.
.ltscale-new-global-line-type-scale = LTSCALE Новый глобальный масштаб типов линий:
@@ -5144,8 +5646,6 @@ plot =
.this-printer-reports-no-driver-options = This printer reports no driver options.
.could-not-read-the-printer-s-options-error = Could not read the printer's options: __ocs_fmt_0__
.reading-the-printer-s-options = Reading the printer's options…
.printing-preferences-saved-for-printer = Printing preferences saved for __ocs_fmt_0__.
.printing-preferences-unchanged = Printing preferences unchanged.
.printer-properties = Printer properties
.merge-overlapping-lines = Слияние пересекающихся линий
.object-lineweights = Весы для объектов
@@ -5616,6 +6116,43 @@ style-manager =
.center-of-text-overline = Центр текста с надчёркиванием
.block-extents = Габариты блока
.base-point = Базовая точка
count-feature =
.selection = Count Selection
.review = Review Count Details
.insert-field = Insert Count Field
.expand-by = EXPAND BY
.mirror-state = Mirror State
.area = Count in a specified area
.create-table = Create Table
.back = Back to List
.match-scale = Match Scale
.match-mirror = Match Mirror State
.error-report = Count Error Report: __ocs_fmt_0__
.toolbar-count = Count: __ocs_fmt_0__
.overlap = Overlapping object
.show-instances = Show Count Instances
.geometries = Geometries: __ocs_fmt_0__
.invalid-title = Count - Invalid Area
.invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
.invalid-undo = Undo the changes to the count boundary
.invalid-undo-detail = The last change is undone; the boundary and the count area come back.
.invalid-continue = Continue and count the entire model space
.invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
.invalid-always = Always perform my current choice
.found = Найдено: __ocs_fmt_0__
.found-total = Найдено: __ocs_fmt_0__, всего: __ocs_fmt_1__
.field-only-in-count = ** Команда COUNTFIELD доступна только в режиме подсчёта. **
.area-active = Область подсчёта активна.
.read-only-value = __ocs_fmt_0__ = __ocs_fmt_1__ (только чтение)
.requires-0-or-1 = Допускается только 0 или 1.
.target-count = __ocs_fmt_0__ ...... __ocs_fmt_1__
.mtext-current-style = MTEXT Текущий текстовый стиль: "__ocs_fmt_0__" Высота текста: __ocs_fmt_1__
.fields-found = Найдено полей: __ocs_fmt_0__.
.fields-updated = Обновлено полей: __ocs_fmt_0__.
.invalid-keyword = Недопустимое ключевое слово параметра.
.invalid-boundary = Недопустимый объект границы области подсчёта. Выберите замкнутую полилинию из отрезков, которая не пересекает саму себя.
.block-not-found = Блок "__ocs_fmt_0__" не найден.
.invalid-point = Недопустимая точка.
graphic-attributes =
.title = Графические атрибуты