Count: Invalid Area dialog, table block kept with the table

- When the count area's boundary is gone the approved Invalid Area dialog
  asks: undo the change (also its X and Cancel) or count all of model space;
  "always" keeps the choice in the settings. An edited boundary moves the area.
- A table's *T block is brought up to date whenever the table changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -5956,3 +5956,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/bg-BG/opencadstudio.ftl

@@ -5944,3 +5944,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/cs-CZ/opencadstudio.ftl

@@ -5941,3 +5941,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/de-DE/opencadstudio.ftl

@@ -5942,3 +5942,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/el-GR/opencadstudio.ftl

@@ -5944,3 +5944,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/en-US/opencadstudio.ftl

@@ -5945,3 +5945,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/es-ES/opencadstudio.ftl

@@ -5944,3 +5944,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/fi-FI/opencadstudio.ftl

@@ -5941,3 +5941,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/fr-FR/opencadstudio.ftl

@@ -5943,3 +5943,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/hi-IN/opencadstudio.ftl

@@ -5932,3 +5932,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/hu-HU/opencadstudio.ftl

@@ -5943,3 +5943,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/it-IT/opencadstudio.ftl

@@ -5943,3 +5943,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/ja-JP/opencadstudio.ftl

@@ -5932,3 +5932,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/ko-KR/opencadstudio.ftl

@@ -5943,3 +5943,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/nl-NL/opencadstudio.ftl

@@ -5942,3 +5942,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/pl-PL/opencadstudio.ftl

@@ -5943,3 +5943,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/pt-BR/opencadstudio.ftl

@@ -5944,3 +5944,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/ru-RU/opencadstudio.ftl

@@ -5945,3 +5945,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/tr-TR/opencadstudio.ftl

@@ -5867,3 +5867,10 @@ count-feature =
     .overlap = Üst üste binen nesne
     .show-instances = Örnekleri göster
     .geometries = Geometriler: __ocs_fmt_0__
+    .invalid-title = Sayım - Geçersiz Alan
+    .invalid-message = Sayım sınırındaki değişiklikler geçersiz bir sayım alanıyla sonuçlandı. Ne yapmak istersiniz?
+    .invalid-undo = Sayım sınırındaki değişiklikleri geri al
+    .invalid-undo-detail = Son işlem geri alınır, sınır ve sayım alanı eski haline döner.
+    .invalid-continue = Devam et ve tüm model alanını say
+    .invalid-continue-detail = Sayım alanı kalkar; sayım tüm model alanında sürer.
+    .invalid-always = Geçerli seçimimi her zaman uygula

locales/zh-CN/opencadstudio.ftl

@@ -5927,3 +5927,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice

locales/zh-TW/opencadstudio.ftl

@@ -5939,3 +5939,10 @@ count-feature =
     .overlap = Overlapping object
     .show-instances = Show Count Instances
     .geometries = Geometries: __ocs_fmt_0__
+    .invalid-title = Count - Invalid Area
+    .invalid-message = The changes to count boundary have resulted to an invalid count area. What do you want to do?
+    .invalid-undo = Undo the changes to the count boundary
+    .invalid-undo-detail = The last change is undone; the boundary and the count area come back.
+    .invalid-continue = Continue and count the entire model space
+    .invalid-continue-detail = The count area is dropped; counting goes on in all of model space.
+    .invalid-always = Always perform my current choice