diff --git a/locales/ar-SA/opencadstudio.ftl b/locales/ar-SA/opencadstudio.ftl
index d79fd5109..16f91faad 100644
--- a/locales/ar-SA/opencadstudio.ftl
+++ b/locales/ar-SA/opencadstudio.ftl
@@ -3134,6 +3134,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  حدد كتلة ذات سمات:
     .annotation-object-scale = مقياس كائن التعليق التوضيحي
     .bedit-select-block-reference-to-edit = BEDIT  حدد مرجع الكتلة لتحريره:
+    .arrayedit-select-array = ARRAYEDIT  حدد المصفوفة:
+    .arrayedit-options = ARRAYEDIT  أدخل خيارًا [المصدر/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: الكائن المحدد ليس مصفوفة ترابطية.
     .blend-enter-continuity-tangent-curvature-c = BLEND  أدخل الاستمرارية [مماس/انحناء] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  حدد المنحنى المفتوح الأول [الاستمرارية=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  حدد المنحنى المفتوح الثاني [الاستمرارية=__ocs_arg_c__]:
diff --git a/locales/bg-BG/opencadstudio.ftl b/locales/bg-BG/opencadstudio.ftl
index d63ece461..bc31d88a5 100644
--- a/locales/bg-BG/opencadstudio.ftl
+++ b/locales/bg-BG/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Избери блок с атрибути:
     .annotation-object-scale = Мащаб на анотационен обект
     .bedit-select-block-reference-to-edit = BEDIT  Избери препратка към блок за редактиране:
+    .arrayedit-select-array = ARRAYEDIT  Изберете масив:
+    .arrayedit-options = ARRAYEDIT  Въведете опция [Източник/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: избраният обект не е асоциативен масив.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Въведи непрекъснатост [Допирателност/Кривина] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Избери първа отворена крива  [Непрекъснатост=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Избери втора отворена крива  [Непрекъснатост=__ocs_arg_c__]:
diff --git a/locales/cs-CZ/opencadstudio.ftl b/locales/cs-CZ/opencadstudio.ftl
index 48b554740..c382e053e 100644
--- a/locales/cs-CZ/opencadstudio.ftl
+++ b/locales/cs-CZ/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Vyberte blok s atributy:
     .annotation-object-scale = Měřítko objektu anotace
     .bedit-select-block-reference-to-edit = BEDIT Vyberte referenci bloku, kterou chcete upravit:
+    .arrayedit-select-array = ARRAYEDIT  Vyberte pole:
+    .arrayedit-options = ARRAYEDIT  Zadejte možnost [Zdroj/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: vybraný objekt není asociativní pole.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter spojitost [Tečna/Zakřivení] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Vyberte první otevřenou křivku [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Vyberte druhou otevřenou křivku [Continuity=__ocs_arg_c__]:
diff --git a/locales/de-DE/opencadstudio.ftl b/locales/de-DE/opencadstudio.ftl
index 5178a577e..4f4dd1745 100644
--- a/locales/de-DE/opencadstudio.ftl
+++ b/locales/de-DE/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Block mit Attributen auswählen:
     .annotation-object-scale = Beschriftungsobjektmaßstab
     .bedit-select-block-reference-to-edit = BEDIT Blockreferenz zum Bearbeiten auswählen:
+    .arrayedit-select-array = ARRAYEDIT  Reihe wählen:
+    .arrayedit-options = ARRAYEDIT  Option eingeben [Quelle/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: das gewählte Objekt ist keine assoziative Reihe.
     .blend-enter-continuity-tangent-curvature-c = BLEND Geben Sie Kontinuität ein [Tangente/Krümmung] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Erste offene Kurve auswählen [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND zweite offene Kurve auswählen [Continuity=__ocs_arg_c__]:
diff --git a/locales/el-GR/opencadstudio.ftl b/locales/el-GR/opencadstudio.ftl
index 976b4f633..0bebe5c31 100644
--- a/locales/el-GR/opencadstudio.ftl
+++ b/locales/el-GR/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Επιλέξτε μπλοκ με χαρακτηριστικά:
     .annotation-object-scale = Κλίμακα αντικειμένου επισημείωσης
     .bedit-select-block-reference-to-edit = BEDIT  Επιλέξτε αναφορά μπλοκ προς επεξεργασία:
+    .arrayedit-select-array = ARRAYEDIT  Επιλέξτε διάταξη:
+    .arrayedit-options = ARRAYEDIT  Δώστε επιλογή [Πηγή/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: το επιλεγμένο αντικείμενο δεν είναι συσχετιστική διάταξη.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Δώστε συνέχεια [Εφαπτομενική/Καμπυλότητα] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Επιλέξτε πρώτη ανοικτή καμπύλη  [Συνέχεια=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Επιλέξτε δεύτερη ανοικτή καμπύλη  [Συνέχεια=__ocs_arg_c__]:
diff --git a/locales/en-US/opencadstudio.ftl b/locales/en-US/opencadstudio.ftl
index 9144b0527..73857ab56 100644
--- a/locales/en-US/opencadstudio.ftl
+++ b/locales/en-US/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Select block with attributes:
     .annotation-object-scale = Annotation Object Scale
     .bedit-select-block-reference-to-edit = BEDIT  Select block reference to edit:
+    .arrayedit-select-array = ARRAYEDIT  Select array:
+    .arrayedit-options = ARRAYEDIT  Enter an option [Source/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: the selected object is not an associative array.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Enter continuity [Tangent/Curvature] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Select first open curve  [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Select second open curve  [Continuity=__ocs_arg_c__]:
diff --git a/locales/es-ES/opencadstudio.ftl b/locales/es-ES/opencadstudio.ftl
index 18cd02a69..e5b04a7a2 100644
--- a/locales/es-ES/opencadstudio.ftl
+++ b/locales/es-ES/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Seleccione un bloque con atributos:
     .annotation-object-scale = Escala del objeto anotativo
     .bedit-select-block-reference-to-edit = BEDIT  Seleccione la referencia de bloque que desea editar:
+    .arrayedit-select-array = ARRAYEDIT  Seleccione la matriz:
+    .arrayedit-options = ARRAYEDIT  Indique una opción [Origen/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: el objeto seleccionado no es una matriz asociativa.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Indique la continuidad [Tangente/Curvatura] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Seleccione la primera curva abierta [Continuidad=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Seleccione la segunda curva abierta [Continuidad=__ocs_arg_c__]:
diff --git a/locales/fi-FI/opencadstudio.ftl b/locales/fi-FI/opencadstudio.ftl
index c1e6ddd4b..a7e39d5e0 100644
--- a/locales/fi-FI/opencadstudio.ftl
+++ b/locales/fi-FI/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Valitse lohko määritteillä:
     .annotation-object-scale = Merkintäobjektin mittakaava
     .bedit-select-block-reference-to-edit = BEDIT Valitse muokattava lohkoviite:
+    .arrayedit-select-array = ARRAYEDIT  Valitse sarja:
+    .arrayedit-options = ARRAYEDIT  Anna vaihtoehto [Lähde/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: valittu objekti ei ole assosiatiivinen sarja.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter jatkuvuus [tangentti/kaarevuus] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Valitse ensimmäinen avoin käyrä [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Valitse toinen avoin käyrä [Continuity=__ocs_arg_c__]:
diff --git a/locales/fr-FR/opencadstudio.ftl b/locales/fr-FR/opencadstudio.ftl
index 079c90a53..1a7e72d41 100644
--- a/locales/fr-FR/opencadstudio.ftl
+++ b/locales/fr-FR/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Sélectionner un bloc avec des attributs :
     .annotation-object-scale = Échelle d'objets d'annotation
     .bedit-select-block-reference-to-edit = BEDIT Sélectionnez la référence de bloc à modifier :
+    .arrayedit-select-array = ARRAYEDIT  Sélectionnez le réseau :
+    .arrayedit-options = ARRAYEDIT  Entrez une option [Source/eXit] <eXit> :
+    .arrayedit-not-an-array = ARRAYEDIT : l'objet sélectionné n'est pas un réseau associatif.
     .blend-enter-continuity-tangent-curvature-c = BLEND Entrer la continuité [Tangent/Curvature] <__ocs_arg_c__:
     .blend-select-first-open-curve-continuity-c = BLEND Sélectionner la première courbe ouverte [Continuité=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Sélectionner la deuxième courbe ouverte [Continuité=__ocs_arg_c__]:
diff --git a/locales/hi-IN/opencadstudio.ftl b/locales/hi-IN/opencadstudio.ftl
index b1e8b141f..d68e919a5 100644
--- a/locales/hi-IN/opencadstudio.ftl
+++ b/locales/hi-IN/opencadstudio.ftl
@@ -3110,6 +3110,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT विशेषताओं के साथ ब्लॉक का चयन करें:
     .annotation-object-scale = Annotation ऑब्जेक्ट स्केल
     .bedit-select-block-reference-to-edit = BEDIT संपादित करने के लिए ब्लॉक संदर्भ का चयन करें:
+    .arrayedit-select-array = ARRAYEDIT  ऐरे चुनें:
+    .arrayedit-options = ARRAYEDIT  विकल्प दर्ज करें [स्रोत/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: चुना गया ऑब्जेक्ट सहयोगी ऐरे नहीं है।
     .blend-enter-continuity-tangent-curvature-c = BLEND  निरंतरता चुनें [स्पर्शरेखा/वक्रता] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND प्रथम खुले वक्र का चयन करें [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND दूसरा खुला वक्र चुनें [Continuity=__ocs_arg_c__]:
diff --git a/locales/hu-HU/opencadstudio.ftl b/locales/hu-HU/opencadstudio.ftl
index b570a4d74..d9bc7790f 100644
--- a/locales/hu-HU/opencadstudio.ftl
+++ b/locales/hu-HU/opencadstudio.ftl
@@ -3124,6 +3124,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Blokk kiválasztása attribútumokkal:
     .annotation-object-scale = Feliratozási objektum léptéke
     .bedit-select-block-reference-to-edit = BEDIT Válassza ki a szerkeszteni kívánt blokkreferenciát:
+    .arrayedit-select-array = ARRAYEDIT  Válassza ki a tömböt:
+    .arrayedit-options = ARRAYEDIT  Adjon meg egy lehetőséget [Forrás/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: a kijelölt objektum nem asszociatív tömb.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Adja meg a folytonosságot [Tangent/Curvature] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Válassza ki az első nyitott görbét [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Válassza ki a második nyitott görbét [Continuity=__ocs_arg_c__]:
diff --git a/locales/it-IT/opencadstudio.ftl b/locales/it-IT/opencadstudio.ftl
index f258b26ad..2dfb5ba3e 100644
--- a/locales/it-IT/opencadstudio.ftl
+++ b/locales/it-IT/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Seleziona blocco con attributi:
     .annotation-object-scale = Scala oggetto annotazione
     .bedit-select-block-reference-to-edit = BEDIT Selezionare il riferimento di blocco da modificare:
+    .arrayedit-select-array = ARRAYEDIT  Selezionare la serie:
+    .arrayedit-options = ARRAYEDIT  Immettere un'opzione [Origine/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: l'oggetto selezionato non è una serie associativa.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter continuità [Tangente/Curvatura] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Selezionare la prima curva aperta [Continuità=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Selezionare la seconda curva aperta [Continuità=__ocs_arg_c__]:
diff --git a/locales/ja-JP/opencadstudio.ftl b/locales/ja-JP/opencadstudio.ftl
index e9ecab250..1bff44ff7 100644
--- a/locales/ja-JP/opencadstudio.ftl
+++ b/locales/ja-JP/opencadstudio.ftl
@@ -3112,6 +3112,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  属性付きブロックを選択:
     .annotation-object-scale = 注釈オブジェクト尺度
     .bedit-select-block-reference-to-edit = BEDIT  編集するブロック参照を選択:
+    .arrayedit-select-array = ARRAYEDIT  配列複写を選択:
+    .arrayedit-options = ARRAYEDIT  オプションを入力 [元/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 選択したオブジェクトは自動調整配列複写ではありません。
     .blend-enter-continuity-tangent-curvature-c = BLEND  連続性を入力 [接線/曲率] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  1 本目の開いた曲線を選択 [連続性=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  2 本目の開いた曲線を選択 [連続性=__ocs_arg_c__]:
diff --git a/locales/ko-KR/opencadstudio.ftl b/locales/ko-KR/opencadstudio.ftl
index 34af88034..5cff614f4 100644
--- a/locales/ko-KR/opencadstudio.ftl
+++ b/locales/ko-KR/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT 속성이 있는 블록 선택:
     .annotation-object-scale = 주석 객체 축척
     .bedit-select-block-reference-to-edit = BEDIT 편집할 블록 참조 선택:
+    .arrayedit-select-array = ARRAYEDIT  배열 선택:
+    .arrayedit-options = ARRAYEDIT  옵션 입력 [원본/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 선택한 객체는 연관 배열이 아닙니다.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter 연속성 [접선/곡률] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND 첫 번째 열린 곡선 선택 [연속성=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND 두 번째 열린 곡선 선택 [연속성=__ocs_arg_c__]:
diff --git a/locales/lo-LA/opencadstudio.ftl b/locales/lo-LA/opencadstudio.ftl
index ce1fa2137..bce39cf2b 100644
--- a/locales/lo-LA/opencadstudio.ftl
+++ b/locales/lo-LA/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  ເລືອກບລັອກທີ່ມີຄຸນລັກສະນະ:
     .annotation-object-scale = ມາດຕາສ່ວນວັດຖຸຄຳອະທິບາຍ
     .bedit-select-block-reference-to-edit = BEDIT  ເລືອກການອ້າງອີງບລັອກທີ່ຈະແກ້ໄຂ:
+    .arrayedit-select-array = ARRAYEDIT  ເລືອກອາເຣ:
+    .arrayedit-options = ARRAYEDIT  ປ້ອນທາງເລືອກ [ແຫຼ່ງ/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: ວັດຖຸທີ່ເລືອກບໍ່ແມ່ນອາເຣທີ່ເຊື່ອມໂຍງ.
     .blend-enter-continuity-tangent-curvature-c = BLEND  ປ້ອນຄວາມຕໍ່ເນື່ອງ [Tangent/Curvature] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  ເລືອກເສັ້ນໂຄ້ງປາຍເປີດທຳອິດ  [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  ເລືອກເສັ້ນໂຄ້ງປາຍເປີດທີສອງ  [Continuity=__ocs_arg_c__]:
diff --git a/locales/nl-NL/opencadstudio.ftl b/locales/nl-NL/opencadstudio.ftl
index 6e83d91b9..1dc4d41f0 100644
--- a/locales/nl-NL/opencadstudio.ftl
+++ b/locales/nl-NL/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Selecteer symbool met attributen:
     .annotation-object-scale = Annotatie objectschaal
     .bedit-select-block-reference-to-edit = BEDIT Selecteer symboolverwijzing naar bewerken:
+    .arrayedit-select-array = ARRAYEDIT  Selecteer de reeks:
+    .arrayedit-options = ARRAYEDIT  Geef een optie [Bron/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: het geselecteerde object is geen associatieve reeks.
     .blend-enter-continuity-tangent-curvature-c = BLEND Vul continuïteit [tangent/curvature] <__ocs_arg_c__> in:
     .blend-select-first-open-curve-continuity-c = BLEND Selecteer eerste open curve [Continuïteit=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Selecteer tweede open curve [Continuïteit=__ocs_arg_c__]:
diff --git a/locales/pl-PL/opencadstudio.ftl b/locales/pl-PL/opencadstudio.ftl
index 689beb578..914c97cf9 100644
--- a/locales/pl-PL/opencadstudio.ftl
+++ b/locales/pl-PL/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Wybierz blok z atrybutami:
     .annotation-object-scale = Skala obiektu adnotacji
     .bedit-select-block-reference-to-edit = BEDIT Wybierz odniesienie do bloku do edycji:
+    .arrayedit-select-array = ARRAYEDIT  Wybierz szyk:
+    .arrayedit-options = ARRAYEDIT  Podaj opcję [Źródło/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: wybrany obiekt nie jest szykiem skojarzonym.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter ciągłość [styczna/krzywizna] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Wybierz pierwszą otwartą krzywą [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Wybierz drugą otwartą krzywą [Continuity=__ocs_arg_c__]:
diff --git a/locales/pt-BR/opencadstudio.ftl b/locales/pt-BR/opencadstudio.ftl
index 3f2055d88..6078e7222 100644
--- a/locales/pt-BR/opencadstudio.ftl
+++ b/locales/pt-BR/opencadstudio.ftl
@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Selecione um bloco com atributos:
     .annotation-object-scale = Escala de objeto de anotação
     .bedit-select-block-reference-to-edit = BEDIT  Selecione a referência de bloco a editar:
+    .arrayedit-select-array = ARRAYEDIT  Selecione o arranjo:
+    .arrayedit-options = ARRAYEDIT  Digite uma opção [Origem/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: o objeto selecionado não é um arranjo associativo.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Insira a continuidade [Tangente/Curvatura] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Selecione a primeira curva aberta [Continuidade=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Selecione a segunda curva aberta [Continuidade=__ocs_arg_c__]:
diff --git a/locales/ru-RU/opencadstudio.ftl b/locales/ru-RU/opencadstudio.ftl
index 6d05b4a86..83cda61d5 100644
--- a/locales/ru-RU/opencadstudio.ftl
+++ b/locales/ru-RU/opencadstudio.ftl
@@ -3125,6 +3125,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Выберите блок с атрибутами:
     .annotation-object-scale = Масштаб аннотативного объекта
     .bedit-select-block-reference-to-edit = BEDIT Выберите ссылку на блок для редактирования:
+    .arrayedit-select-array = ARRAYEDIT  Выберите массив:
+    .arrayedit-options = ARRAYEDIT  Введите параметр [Исходные/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: выбранный объект не является ассоциативным массивом.
     .blend-enter-continuity-tangent-curvature-c = BLEND Введите непрерывность [Тангент/Курватура] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Выберите первую открытую кривую [Продолжение=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Выберите вторую открытую кривую [Продолжение=__ocs_arg_c__]:
diff --git a/locales/tr-TR/opencadstudio.ftl b/locales/tr-TR/opencadstudio.ftl
index b1bb5b4c9..142306fc3 100644
--- a/locales/tr-TR/opencadstudio.ftl
+++ b/locales/tr-TR/opencadstudio.ftl
@@ -3103,6 +3103,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Öznitelikleri olan bir blok seçin:
     .annotation-object-scale = Açıklama Nesnesi Ölçeği
     .bedit-select-block-reference-to-edit = BEDIT  Düzenlenecek blok referansını seçin:
+    .arrayedit-select-array = ARRAYEDIT  Diziyi seçin:
+    .arrayedit-options = ARRAYEDIT  Bir seçenek girin [Kaynak/çıKış] <çıKış>:
+    .arrayedit-not-an-array = ARRAYEDIT: seçilen nesne ilişkili bir dizi değil.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Sürekliliği girin [Teğet/Eğrilik] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  İlk açık eğriyi seçin [Süreklilik=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  İkinci açık eğriyi seçin [Süreklilik=__ocs_arg_c__]:
diff --git a/locales/zh-CN/opencadstudio.ftl b/locales/zh-CN/opencadstudio.ftl
index 09c0585f1..38c92b9d8 100644
--- a/locales/zh-CN/opencadstudio.ftl
+++ b/locales/zh-CN/opencadstudio.ftl
@@ -3109,6 +3109,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  选择带属性的块：
     .annotation-object-scale = 注释对象比例
     .bedit-select-block-reference-to-edit = BEDIT 选择要编辑的块引用 :
+    .arrayedit-select-array = ARRAYEDIT  选择阵列:
+    .arrayedit-options = ARRAYEDIT  输入选项 [源/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 所选对象不是关联阵列。
     .blend-enter-continuity-tangent-curvature-c = BLEND  输入连续性 [相切/曲率] <__ocs_arg_c__>：
     .blend-select-first-open-curve-continuity-c = BLEND  选择第一条开放曲线  [Continuity=__ocs_arg_c__]：
     .blend-select-second-open-curve-continuity-c = BLEND  选择第二条开放曲线  [Continuity=__ocs_arg_c__]：
diff --git a/locales/zh-TW/opencadstudio.ftl b/locales/zh-TW/opencadstudio.ftl
index 0307994fe..3774860a1 100644
--- a/locales/zh-TW/opencadstudio.ftl
+++ b/locales/zh-TW/opencadstudio.ftl
@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  選擇帶屬性的圖塊：
     .annotation-object-scale = 註解物件比例
     .bedit-select-block-reference-to-edit = BEDIT 選擇要編輯的圖塊引用 :
+    .arrayedit-select-array = ARRAYEDIT  選取陣列:
+    .arrayedit-options = ARRAYEDIT  輸入選項 [來源/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 選取的物件不是關聯式陣列。
     .blend-enter-continuity-tangent-curvature-c = BLEND  輸入連續性 [相切/曲率] <__ocs_arg_c__>：
     .blend-select-first-open-curve-continuity-c = BLEND  選擇第一條開放曲線  [Continuity=__ocs_arg_c__]：
     .blend-select-second-open-curve-continuity-c = BLEND  選擇第二條開放曲線  [Continuity=__ocs_arg_c__]：
diff --git a/src/app/commands/blocks.rs b/src/app/commands/blocks.rs
index b9a74490b..f8ccdab8b 100644
--- a/src/app/commands/blocks.rs
+++ b/src/app/commands/blocks.rs
@@ -301,6 +301,45 @@ impl OpenCADStudio {
                 }
             }
 
+            // ARRAYEDIT — edit an associative array; a preselected one skips
+            // the pick.
+            "ARRAYEDIT" => {
+                use crate::modules::draw::modify::arrayedit::ArrayEditCommand;
+                let selected = self.tabs[i].scene.selected_handles_in_order();
+                let array = match selected.as_slice() {
+                    [handle] => Some(*handle),
+                    _ => None,
+                };
+                self.tabs[i].scene.deselect_all();
+                let command = ArrayEditCommand::new(array);
+                self.command_line.push_info(&command.prompt());
+                self.tabs[i].active_cmd = Some(Box::new(command));
+            }
+
+            // ARRAYEDIT Source: edit the objects the array repeats in the
+            // Block Editor; every item follows when it is saved.
+            cmd if cmd.starts_with("ARRAYEDIT_SOURCE:") => {
+                let handle = codec::Handle::new(
+                    cmd["ARRAYEDIT_SOURCE:".len()..].parse().unwrap_or(0),
+                );
+                let document = &self.tabs[i].scene.document;
+                let source = crate::scene::assoc_array::array_of_insert(document, handle)
+                    .and_then(|array| {
+                        document
+                            .block_records
+                            .iter()
+                            .find(|record| record.handle == array.source_block)
+                            .map(|record| record.name.clone())
+                    });
+                match source {
+                    Some(name) => return Some(self.dispatch_command(&format!("BEDIT_OPEN:{name}"))),
+                    None => self.command_line.push_error(
+                        crate::t!("ARRAYEDIT: the selected object is not an associative array.")
+                            .as_ref(),
+                    ),
+                }
+            }
+
             // PASTESPEC — offer the copied objects now; the system clipboard's
             // text joins the formats once read (Message::PasteSpecial).
             "PASTESPEC" => {
diff --git a/src/locale_catalog.rs b/src/locale_catalog.rs
index bb757641b..d4ecde9fa 100644
--- a/src/locale_catalog.rs
+++ b/src/locale_catalog.rs
@@ -802,6 +802,9 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "BACKGROUND  colour [Default/Black/DarkGray/Gray/LightGray/White] or R G B (0–255):" => Some(("file", "background-colour-default-black-darkgray-gray")),
         "BASE  Specify base point:" => Some(("insert", "base-specify-base-point")),
         "BEDIT  Select block reference to edit:" => Some(("modify", "bedit-select-block-reference-to-edit")),
+        "ARRAYEDIT  Select array:" => Some(("modify", "arrayedit-select-array")),
+        "ARRAYEDIT  Enter an option [Source/eXit] <eXit>:" => Some(("modify", "arrayedit-options")),
+        "ARRAYEDIT: the selected object is not an associative array." => Some(("modify", "arrayedit-not-an-array")),
         "BEDIT: Block \"{}\" edit discarded." => Some(("inquiry", "bedit-block-edit-discarded")),
         "BEDIT: Block \"{}\" saved. All references updated." => Some(("inquiry", "bedit-block-saved-all-references-updated")),
         "BEDIT: Editing block \"{}\". Use Save Block or Discard to finish." => Some(("inquiry", "bedit-editing-block-use-save-block-or-discard")),
diff --git a/src/modules/draw/modify/arrayedit.rs b/src/modules/draw/modify/arrayedit.rs
new file mode 100644
index 000000000..d1d48311e
--- /dev/null
+++ b/src/modules/draw/modify/arrayedit.rs
@@ -0,0 +1,78 @@
+// ARRAYEDIT — edit an associative array. Counts and spacings are edited in
+// Properties; Source opens the objects every item repeats in the Block
+// Editor, and closing it updates all items at once.
+
+use crate::command::{CadCommand, CmdOption, CmdResult};
+use codec::Handle;
+use glam::DVec3;
+
+pub struct ArrayEditCommand {
+    array: Option<Handle>,
+}
+
+impl ArrayEditCommand {
+    pub fn new(array: Option<Handle>) -> Self {
+        Self { array }
+    }
+}
+
+impl CadCommand for ArrayEditCommand {
+    fn name(&self) -> &'static str {
+        "ARRAYEDIT"
+    }
+
+    fn prompt(&self) -> String {
+        match self.array {
+            None => crate::t!("ARRAYEDIT  Select array:").into_owned(),
+            Some(_) => crate::t!("ARRAYEDIT  Enter an option [Source/eXit] <eXit>:").into_owned(),
+        }
+    }
+
+    fn options(&self) -> Vec<CmdOption> {
+        match self.array {
+            None => Vec::new(),
+            Some(_) => vec![
+                CmdOption::new(crate::t!("Source").as_ref(), "S"),
+                CmdOption::new(crate::t!("eXit").as_ref(), "X"),
+            ],
+        }
+    }
+
+    fn needs_entity_pick(&self) -> bool {
+        self.array.is_none()
+    }
+
+    fn on_entity_pick(&mut self, handle: Handle, _pt: DVec3) -> CmdResult {
+        if handle.is_null() {
+            return CmdResult::NeedPoint;
+        }
+        self.array = Some(handle);
+        CmdResult::NeedPoint
+    }
+
+    fn wants_text_input(&self) -> bool {
+        self.array.is_some()
+    }
+
+    fn on_text_input(&mut self, text: &str) -> Option<CmdResult> {
+        let array = self.array?;
+        match text.trim().trim_start_matches('_').to_ascii_uppercase().as_str() {
+            "S" | "SOURCE" => Some(CmdResult::Dispatch(format!(
+                "ARRAYEDIT_SOURCE:{}",
+                array.value()
+            ))),
+            "X" | "EXIT" => Some(CmdResult::Cancel),
+            _ => None,
+        }
+    }
+
+    fn on_point(&mut self, _pt: DVec3) -> CmdResult {
+        CmdResult::NeedPoint
+    }
+
+    fn on_enter(&mut self) -> CmdResult {
+        CmdResult::Cancel
+    }
+}
+
+inventory::submit!(crate::command::CommandRegistration { names: &["ARRAYEDIT"] });
diff --git a/src/modules/draw/modify/mod.rs b/src/modules/draw/modify/mod.rs
index 0f821ac61..ce4da1d84 100644
--- a/src/modules/draw/modify/mod.rs
+++ b/src/modules/draw/modify/mod.rs
@@ -1,5 +1,6 @@
 pub mod align;
 pub mod array;
+pub mod arrayedit;
 pub mod attedit;
 pub mod blend;
 pub mod block_edit;