feat(alias): centralize command aliases in user-editable ocad.pgp (#286/#288)

Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:

- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
  embedded and copied to config/ocad.pgp on first launch; only that user
  copy is read after. AA→AREA default closes #286.
- resolve_alias() rewrites the leading command token at the top of
  dispatch_command_inner, so aliases resolve for every path (families,
  plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
  surfaces its target command as the top (highlighted) suggestion so the
  highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
  button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
  CommandRegistration arrays, keeping canonical/synonym/distinct-command
  names. ocad.pgp is now the sole source: deleting or remapping an alias
  there takes effect. CUI stays on the keyboard-shortcut panel.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

src/modules/draw/clipboard/paste.rs

@@ -131,6 +131,6 @@ impl CadCommand for PasteCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["PASTECLIP", "PC"] });  // PasteCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["PASTECLIP"] });  // PasteCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["PASTEORIG"] });
 inventory::submit!(crate::command::CommandRegistration { names: &["PASTEBLOCK"] });

src/modules/draw/draw/arc.rs

@@ -1392,7 +1392,7 @@ impl CadCommand for ArcContCommand {
 inventory::submit!(crate::command::CommandRegistration { names: &["ARC_3P"] });  // Arc3PCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["ARC_CSA"] });  // ArcCSACommand
 inventory::submit!(crate::command::CommandRegistration { names: &["ARC_CSL"] });  // ArcCSLCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["A", "ARC"] });  // ArcCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["ARC"] });  // ArcCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["ARC_SCA"] });  // ArcSCACommand
 inventory::submit!(crate::command::CommandRegistration { names: &["ARC_SCE"] });  // ArcSCECommand
 inventory::submit!(crate::command::CommandRegistration { names: &["ARC_SCL"] });  // ArcSCLCommand

src/modules/draw/draw/circle.rs

@@ -991,6 +991,6 @@ impl CadCommand for CircleTTTCommand {
 inventory::submit!(crate::command::CommandRegistration { names: &["CIRCLE_2P"] });  // Circle2PCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["CIRCLE_3P"] });  // Circle3PCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["CIRCLE_CD"] });  // CircleCDCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["C", "CIRCLE"] });  // CircleCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["CIRCLE"] });  // CircleCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["CIRCLE_TTR"] });  // CircleTTRCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["CIRCLE_TTT"] });  // CircleTTTCommand

src/modules/draw/draw/donut.rs

@@ -143,4 +143,4 @@ fn make_donut(cx: f64, cy: f64, inner_r: f64, outer_r: f64) -> EntityType {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["DO", "DONUT"] });  // DonutCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["DONUT"] });  // DonutCommand

src/modules/draw/draw/ellipse.rs

@@ -646,4 +646,4 @@ fn line_wire(from: DVec3, to: DVec3) -> WireModel {
 // ── Autocomplete registry ─────────────────────────────────
 inventory::submit!(crate::command::CommandRegistration { names: &["ELLIPSE_ARC"] });  // EllipseArcCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["ELLIPSE_AXIS"] });  // EllipseAxisCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["EL", "ELLIPSE"] });  // EllipseCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["ELLIPSE"] });  // EllipseCommand

src/modules/draw/draw/hatch.rs

@@ -455,4 +455,4 @@ impl CadCommand for BoundaryCommand {
 // ── Autocomplete registry ─────────────────────────────────
 inventory::submit!(crate::command::CommandRegistration { names: &["BOUNDARY"] });  // BoundaryCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["GRADIENT"] });  // GradientCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["H", "HATCH"] });  // HatchCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["HATCH"] });  // HatchCommand

src/modules/draw/draw/hatchedit.rs

@@ -164,4 +164,4 @@ impl CadCommand for HatcheditCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["HATCHEDIT", "HE"] });  // HatcheditCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["HATCHEDIT"] });  // HatcheditCommand

src/modules/draw/draw/line.rs

@@ -331,4 +331,4 @@ mod tangent_tests {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["L", "LINE"] });  // LineCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["LINE"] });  // LineCommand

src/modules/draw/draw/mline.rs

@@ -170,4 +170,4 @@ fn build_mline(pts: &[Vec3], scale: f64, closed: bool, style_name: &str) -> Enti
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["ML", "MLINE"] });  // MlineCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["MLINE"] });  // MlineCommand

src/modules/draw/draw/point.rs

@@ -63,7 +63,7 @@ impl CadCommand for PointCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["PO", "POINT"] });  // PointCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["POINT"] });  // PointCommand
 // Point display style system variables + dialog.
 inventory::submit!(crate::command::CommandRegistration {
     names: &["PDMODE", "PDSIZE", "DDPTYPE"]

src/modules/draw/draw/polyline.rs

@@ -351,4 +351,4 @@ impl CadCommand for PlineCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["PL", "PLINE"] });  // PlineCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["PLINE"] });  // PlineCommand

src/modules/draw/draw/ray.rs

@@ -201,4 +201,4 @@ impl CadCommand for XLineCommand {
 
 // ── Autocomplete registry ─────────────────────────────────
 inventory::submit!(crate::command::CommandRegistration { names: &["RAY"] });  // RayCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["CONSTRUCTIONLINE", "XL", "XLINE"] });  // XLineCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["CONSTRUCTIONLINE", "XLINE"] });  // XLineCommand

src/modules/draw/draw/shapes.rs

@@ -834,8 +834,8 @@ fn edge_poly_params(a: DVec3, b: DVec3, sides: u32) -> Option<(DVec3, f64, f64)>
 
 // ── Autocomplete registry ─────────────────────────────────
 inventory::submit!(crate::command::CommandRegistration { names: &["POLY_C"] });  // PolyCCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["POL", "POLY", "POLYGON"] });  // PolyCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["POLY", "POLYGON"] });  // PolyCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["POLY_E"] });  // PolyECommand
 inventory::submit!(crate::command::CommandRegistration { names: &["RECT_CEN"] });  // RectCenCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["REC", "RECT", "RECTANG"] });  // RectCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["RECT", "RECTANG"] });  // RectCommand
 inventory::submit!(crate::command::CommandRegistration { names: &["RECT_ROT"] });  // RectRotCommand

src/modules/draw/draw/spline.rs

@@ -190,4 +190,4 @@ impl CadCommand for SplineCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["SPL", "SPLINE"] });  // SplineCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["SPLINE"] });  // SplineCommand

src/modules/draw/draw/wipeout.rs

@@ -191,4 +191,4 @@ fn make_poly_wipeout(pts: &[Vec3]) -> EntityType {
 }
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["WIPEOUT", "WO"] });
+inventory::submit!(crate::command::CommandRegistration { names: &["WIPEOUT"] });

src/modules/draw/groups/ungroup.rs

@@ -62,4 +62,4 @@ impl CadCommand for UngroupCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["UG", "UNGROUP"] });  // UngroupCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["UNGROUP"] });  // UngroupCommand

src/modules/draw/inquiry/dist.rs

@@ -90,4 +90,4 @@ impl CadCommand for DistCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["DI", "DIST"] });  // DistCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["DIST"] });  // DistCommand

src/modules/draw/inquiry/divide.rs

@@ -314,5 +314,5 @@ fn arc_span_rad(start: f64, end: f64) -> f64 {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["DIV", "DIVIDE"] });  // DivideCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["ME", "MEASURE"] });  // MeasureCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["DIVIDE"] });  // DivideCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["MEASURE"] });  // MeasureCommand

src/modules/draw/modify/align.rs

@@ -192,4 +192,4 @@ impl AlignCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["AL", "ALIGN"] });  // AlignCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["ALIGN"] });  // AlignCommand

src/modules/draw/modify/attedit.rs

@@ -62,4 +62,4 @@ impl CadCommand for AtteditCommand {
 }
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["ATTEDIT", "ATE"] });
+inventory::submit!(crate::command::CommandRegistration { names: &["ATTEDIT"] });

src/modules/draw/modify/break_cmd.rs

@@ -470,5 +470,5 @@ impl CadCommand for BreakAtPointCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["BAP", "BREAKATPOINT"] });  // BreakAtPointCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["BR", "BREAK"] });  // BreakInteractiveCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["BREAKATPOINT"] });  // BreakAtPointCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["BREAK"] });  // BreakInteractiveCommand

src/modules/draw/modify/fillet.rs

@@ -1950,5 +1950,5 @@ impl CadCommand for ChamferCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["CHA", "CHAMFER"] });  // ChamferCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["F", "FILLET"] });  // FilletCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["CHAMFER"] });  // ChamferCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["FILLET"] });  // FilletCommand

src/modules/draw/modify/join.rs

@@ -264,4 +264,4 @@ fn is_collinear(verts: &[(DVec3, f64)]) -> bool {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["J", "JOIN"] });  // JoinCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["JOIN"] });  // JoinCommand

src/modules/draw/modify/lengthen.rs

@@ -512,4 +512,4 @@ fn lengthen_spline(spl: &SplineEnt, pick_pt: Vec3, mode: &LenMode) -> Option<Ent
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["LEN", "LENGTHEN"] });  // LengthenCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["LENGTHEN"] });  // LengthenCommand

src/modules/draw/modify/offset.rs

@@ -816,7 +816,7 @@ impl CadCommand for OffsetCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["O", "OFFSET"] });  // OffsetCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["OFFSET"] });  // OffsetCommand
 
 #[cfg(test)]
 mod offset_tests {

src/modules/draw/modify/pedit.rs

@@ -185,4 +185,4 @@ pub fn apply_pedit(entity: &mut EntityType, op: &PeditOp) -> bool {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["PE", "PEDIT"] });  // PeditCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["PEDIT"] });  // PeditCommand

src/modules/draw/modify/splinedit.rs

@@ -203,4 +203,4 @@ pub fn apply_spline_op(doc: &mut acadrust::CadDocument, handle: acadrust::Handle
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["SPE", "SPLINEDIT"] });  // SplineditCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["SPLINEDIT"] });  // SplineditCommand

src/modules/draw/modify/trim.rs

@@ -2751,8 +2751,8 @@ impl CadCommand for ExtendCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["EX", "EXTEND"] });  // ExtendCommand
-inventory::submit!(crate::command::CommandRegistration { names: &["TR", "TRIM"] });  // TrimCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["EXTEND"] });  // ExtendCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["TRIM"] });  // TrimCommand
 
 #[cfg(test)]
 mod tests {

src/modules/draw/properties/match_prop.rs

@@ -92,4 +92,4 @@ impl CadCommand for MatchPropCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["MA", "MATCHPROP"] });  // MatchPropCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["MATCHPROP"] });  // MatchPropCommand

src/modules/draw/select.rs

@@ -108,4 +108,4 @@ impl CadCommand for SelectObjectsCommand {
 
 
 // ── Autocomplete registry ─────────────────────────────────
-inventory::submit!(crate::command::CommandRegistration { names: &["AR", "ARRAY", "ARRAYPATH", "ARRAYPOLAR", "ARRAYRECT", "BLOCK", "CC", "CO", "COPY", "COPYCLIP", "CUTCLIP", "CX", "E", "ERASE", "EXPLODE", "G", "GROUP", "LAYFRZ", "LAYLCK", "LAYMCUR", "LAYOFF", "LAYULK", "M", "MI", "MIRROR", "MOVE", "RO", "ROTATE", "SC", "SCALE", "SS", "STRETCH", "X"] });  // SelectObjectsCommand
+inventory::submit!(crate::command::CommandRegistration { names: &["ARRAY", "ARRAYPATH", "ARRAYPOLAR", "ARRAYRECT", "BLOCK", "COPY", "COPYCLIP", "CUTCLIP", "ERASE", "EXPLODE", "GROUP", "LAYFRZ", "LAYLCK", "LAYMCUR", "LAYOFF", "LAYULK", "MIRROR", "MOVE", "ROTATE", "SCALE", "STRETCH"] });  // SelectObjectsCommand