block definition: locale coverage, tests for the new defaults, wraps

- block-def strings in every locale (English until translated); the
  catalog test requires each locale to carry them.
- A new block's base point starts at 0, and ATTMAN / BATTMAN report a
  drawing without attributed blocks; the tests expect that now.
- Lines over 100 columns wrapped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -6560,3 +6560,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/bg-BG/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/cs-CZ/opencadstudio.ftl

@@ -6545,3 +6545,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/de-DE/opencadstudio.ftl

@@ -6546,3 +6546,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/el-GR/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/es-ES/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/fi-FI/opencadstudio.ftl

@@ -6545,3 +6545,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/fr-FR/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/hi-IN/opencadstudio.ftl

@@ -6536,3 +6536,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/hu-HU/opencadstudio.ftl

@@ -6532,3 +6532,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/it-IT/opencadstudio.ftl

@@ -6547,3 +6547,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/ja-JP/opencadstudio.ftl

@@ -6536,3 +6536,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/ko-KR/opencadstudio.ftl

@@ -6547,3 +6547,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/lo-LA/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/nl-NL/opencadstudio.ftl

@@ -6546,3 +6546,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/pl-PL/opencadstudio.ftl

@@ -6547,3 +6547,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/pt-BR/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/ru-RU/opencadstudio.ftl

@@ -6549,3 +6549,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/zh-CN/opencadstudio.ftl

@@ -6531,3 +6531,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/zh-TW/opencadstudio.ftl

@@ -6543,3 +6543,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File