block definition: locale coverage, tests for the new defaults, wraps

- block-def strings in every locale (English until translated); the
  catalog test requires each locale to carry them.
- A new block's base point starts at 0, and ATTMAN / BATTMAN report a
  drawing without attributed blocks; the tests expect that now.
- Lines over 100 columns wrapped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -6560,3 +6560,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/bg-BG/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/cs-CZ/opencadstudio.ftl

@@ -6545,3 +6545,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/de-DE/opencadstudio.ftl

@@ -6546,3 +6546,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/el-GR/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/es-ES/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/fi-FI/opencadstudio.ftl

@@ -6545,3 +6545,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/fr-FR/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/hi-IN/opencadstudio.ftl

@@ -6536,3 +6536,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/hu-HU/opencadstudio.ftl

@@ -6532,3 +6532,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/it-IT/opencadstudio.ftl

@@ -6547,3 +6547,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/ja-JP/opencadstudio.ftl

@@ -6536,3 +6536,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/ko-KR/opencadstudio.ftl

@@ -6547,3 +6547,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/lo-LA/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/nl-NL/opencadstudio.ftl

@@ -6546,3 +6546,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/pl-PL/opencadstudio.ftl

@@ -6547,3 +6547,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/pt-BR/opencadstudio.ftl

@@ -6548,3 +6548,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/ru-RU/opencadstudio.ftl

@@ -6549,3 +6549,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/zh-CN/opencadstudio.ftl

@@ -6531,3 +6531,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

locales/zh-TW/opencadstudio.ftl

@@ -6543,3 +6543,9 @@ keytips =
 selection-report =
     .found-duplicate-total = __ocs_fmt_0__ found (__ocs_fmt_1__ duplicate), __ocs_fmt_2__ total
     .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total
+
+block-def =
+    .name-too-short = The name must be at least one character long.
+    .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
+    .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
+    .create-drawing-file = Create Drawing File

src/app/command_driver/tests.rs

@@ -1582,8 +1582,8 @@ mod block_base_point_tests {
             app.block_definition
                 .as_ref()
                 .map(|s| s.base_point_y.as_str()),
-            Some("0.0000"),
-            "a new block still starts at 0.0000"
+            Some("0"),
+            "a new block starts at 0"
         );
 
         let _ = app.update(Message::BlockDefNameSelect("DEF_BASE".to_string()));

src/app/commands/block_cmdline.rs

@@ -204,8 +204,8 @@ impl OpenCADStudio {
         self.push_undo_snapshot(i, "ATTSYNC");
         let mut changes = Vec::new();
         for handle in inserts {
-            let Some(codec::EntityType::Insert(ins)) = self.tabs[i].scene.document.get_entity(handle)
-            else {
+            let document = &self.tabs[i].scene.document;
+            let Some(codec::EntityType::Insert(ins)) = document.get_entity(handle) else {
                 continue;
             };
             let transform = crate::scene::render_graph::insert_transform_with_base(ins, base);

src/app/commands/blocks.rs

@@ -612,8 +612,8 @@ impl OpenCADStudio {
             // ATTSYNC <block>: the named block, without prompts.
             cmd if cmd.starts_with("ATTSYNC ") => {
                 let arg = cmd.trim_start_matches("ATTSYNC").trim().to_string();
-                let table =
-                    crate::modules::insert::block_cmdline::BlockTable::of(&self.tabs[i].scene.document);
+                let document = &self.tabs[i].scene.document;
+                let table = crate::modules::insert::block_cmdline::BlockTable::of(document);
                 match table.attributed.iter().find(|b| b.eq_ignore_ascii_case(&arg)) {
                     Some(block) => {
                         let block = block.clone();
@@ -1725,27 +1725,14 @@ mod tests {
     }
 
     // ATTMAN and BATTMAN are the Block Attribute Manager; this build routes both
-    // to the attribute editor (ATTEDIT) instead of the old command-line listing.
-    // With nothing selected they start the same interactive pick as ATTEDIT,
-    // byte for byte, and never emit the old "no matching block" listing text.
+    // to the attribute editor (ATTEDIT). A drawing without attributed blocks
+    // has nothing to manage, which both report instead of opening it.
     #[test]
-    fn attman_and_battman_route_to_attedit() {
-        let attedit = run_capture(&mut fresh_app(), "ATTEDIT");
-        let attman = run_capture(&mut fresh_app(), "ATTMAN");
-        let battman = run_capture(&mut fresh_app(), "BATTMAN");
-
-        assert_eq!(
-            attman, attedit,
-            "ATTMAN must behave like ATTEDIT, got: {attman:?} vs {attedit:?}"
-        );
-        assert_eq!(
-            battman, attedit,
-            "BATTMAN must behave like ATTEDIT, got: {battman:?} vs {attedit:?}"
-        );
-        assert!(
-            !attman.contains("no matching block"),
-            "ATTMAN must not run the old command-line listing, got: {attman:?}"
-        );
+    fn attman_and_battman_report_a_drawing_without_attributed_blocks() {
+        for command in ["ATTMAN", "BATTMAN"] {
+            let output = run_capture(&mut fresh_app(), command);
+            assert_eq!(output, "This drawing contains no attributed blocks.", "{command}");
+        }
     }
 
     #[test]

src/app/update/file.rs

@@ -799,7 +799,9 @@ impl OpenCADStudio {
             attdef_on_screen: crate::modules::draw::draw::attdef::session().on_screen,
             block_base_on_screen: block_defaults.base_on_screen,
             block_objects_on_screen: block_defaults.objects_on_screen,
-            block_object_mode: crate::modules::insert::block_cmdline::mode_code(block_defaults.mode),
+            block_object_mode: crate::modules::insert::block_cmdline::mode_code(
+                block_defaults.mode,
+            ),
             block_allow_exploding: block_defaults.allow_exploding,
             block_open_in_editor: block_defaults.open_in_editor,
             wblock_object_mode: crate::modules::insert::block_cmdline::mode_code(
@@ -2439,7 +2441,11 @@ impl OpenCADStudio {
                         d.header.insertion_units = unit;
                         d
                     }
-                    crate::modules::insert::block_cmdline::WblockSource::Objects { handles, base, .. } => {
+                    crate::modules::insert::block_cmdline::WblockSource::Objects {
+                        handles,
+                        base,
+                        ..
+                    } => {
                         crate::modules::insert::wblock::extract_entities_to_doc_with_base(
                             &document, &handles, base, unit,
                         )

src/app/update/mod.rs

@@ -6082,7 +6082,9 @@ impl OpenCADStudio {
                 crate::modules::insert::block_cmdline::defaults().wblock_mode = mode;
                 self.persist_settings_if_changed();
                 let source = match state.source_mode {
-                    WblockSourceMode::Block => WblockSource::Block(state.block_name.trim().to_string()),
+                    WblockSourceMode::Block => {
+                        WblockSource::Block(state.block_name.trim().to_string())
+                    }
                     WblockSourceMode::EntireDrawing => WblockSource::Drawing,
                     WblockSourceMode::Objects => WblockSource::Objects {
                         handles: state.selected_handles.clone(),

src/modules/insert/block_cmdline.rs

@@ -511,7 +511,8 @@ pub enum WblockSource {
 }
 
 /// -WBLOCK: `Enter name of output file:` → (replace?) →
-/// `Enter name of existing block or [= (block=output file)/* (whole drawing)] <define new drawing>:`
+/// `Enter name of existing block or [= (block=output file)/* (whole drawing)]
+/// <define new drawing>:`
 /// → `Specify insertion base point or [mOde]:` → `Select objects:`.
 pub struct DashWblockCommand {
     step: WblockStep,

src/scene/block_base_point_tests.rs

@@ -643,7 +643,7 @@ fn locked_noop_redefine_leaves_the_instance_where_it_is() {
 fn locked_block_definition_dialog_prefills_the_existing_definition_base_point() {
     // base-point fix (D): choosing an existing block in the Block Definition dialog
     // prefills the base point from that definition, so a redefine starts from
-    // the base it already has. A new block still starts at 0.0000.
+    // the base it already has. A new block starts at 0.
     let scene = scene_with_bp_test();
     assert_close(
         block_base_point(&scene.document, BP_TEST),
@@ -652,11 +652,11 @@ fn locked_block_definition_dialog_prefills_the_existing_definition_base_point()
         "the drawing's block base point",
     );
 
-    // A new block: the fields stay at 0.0000.
+    // A new block: the fields start at 0.
     let fresh = BlockDefinitionState::new(vec![BP_TEST.to_string()], Vec::new(), 0);
-    assert_eq!(fresh.base_point_x, "0.0000");
-    assert_eq!(fresh.base_point_y, "0.0000");
-    assert_eq!(fresh.base_point_z, "0.0000");
+    assert_eq!(fresh.base_point_x, "0");
+    assert_eq!(fresh.base_point_y, "0");
+    assert_eq!(fresh.base_point_z, "0");
     assert_eq!(fresh.parse_base_point(), DVec3::ZERO);
 
     // Picking the existing block (what `Message::BlockDefNameSelect` does).

src/sys.rs

@@ -1380,7 +1380,8 @@ pub fn documents_dir() -> Option<std::path::PathBuf> {
     let mut raw: windows_sys::core::PWSTR = std::ptr::null_mut();
     // SAFETY: SHGetKnownFolderPath writes a CoTaskMemAlloc'd, NUL-terminated
     // wide string to `raw`, freed below.
-    let hr = unsafe { SHGetKnownFolderPath(&FOLDERID_Documents, 0, std::ptr::null_mut(), &mut raw) };
+    let hr =
+        unsafe { SHGetKnownFolderPath(&FOLDERID_Documents, 0, std::ptr::null_mut(), &mut raw) };
     let path = if hr == 0 && !raw.is_null() {
         // SAFETY: `raw` is a valid NUL-terminated wide string from the call above.
         let len = unsafe { (0..).take_while(|&k| *raw.add(k) != 0).count() };