ATTDEF: dialog, -ATTDEF prompts, tag display, Properties and ribbon

Attribute Definition dialog and Edit Attribute Definition dialog, -ATTDEF
with the reference prompts and modes (AFLAGS), tag shown in the drawing,
justification-aware grips, reworked Properties with validation, Home Block
slide-out and Insert Block Definition panel, and the codec patch for
ATTDEF DXF output and the R2013+ solid wire cache.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -4032,6 +4032,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = إنشاء
     .boolean = عمليات منطقية

locales/bg-BG/opencadstudio.ftl

@@ -4019,6 +4019,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Създаване
     .boolean = Булеви операции

locales/cs-CZ/opencadstudio.ftl

@@ -4017,6 +4017,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Vytvořit
     .boolean = Booleovské operace

locales/de-DE/opencadstudio.ftl

@@ -4018,6 +4018,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Erstellen
     .boolean = Boolesche Operationen

locales/el-GR/opencadstudio.ftl

@@ -4020,6 +4020,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Δημιουργία
     .boolean = Δυαδική πράξη

locales/en-US/opencadstudio.ftl

@@ -4021,6 +4021,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Create
     .boolean = Boolean

locales/es-ES/opencadstudio.ftl

@@ -4020,6 +4020,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Crear
     .boolean = Booleanas

locales/fi-FI/opencadstudio.ftl

@@ -4019,6 +4019,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Luo
     .boolean = Boolen operaatiot

locales/fr-FR/opencadstudio.ftl

@@ -4020,6 +4020,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Créer
     .boolean = Opérations booléennes

locales/hi-IN/opencadstudio.ftl

@@ -4008,6 +4008,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = बनाएँ
     .boolean = बूलियन संक्रियाएँ

locales/hu-HU/opencadstudio.ftl

@@ -4019,6 +4019,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Létrehozás
     .boolean = Logikai műveletek

locales/it-IT/opencadstudio.ftl

@@ -4019,6 +4019,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Crea
     .boolean = Operazioni booleane

locales/ja-JP/opencadstudio.ftl

@@ -4008,6 +4008,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = 作成
     .boolean = ブール演算

locales/ko-KR/opencadstudio.ftl

@@ -4019,6 +4019,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = 생성
     .boolean = 불리언 연산

locales/nl-NL/opencadstudio.ftl

@@ -4018,6 +4018,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Maken
     .boolean = Booleaanse bewerkingen

locales/pl-PL/opencadstudio.ftl

@@ -4019,6 +4019,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Utwórz
     .boolean = Operacje boolowskie

locales/pt-BR/opencadstudio.ftl

@@ -4020,6 +4020,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Criar
     .boolean = Operações booleanas

locales/ru-RU/opencadstudio.ftl

@@ -4021,6 +4021,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = Создание
     .boolean = Булевы операции

locales/tr-TR/opencadstudio.ftl

@@ -3980,6 +3980,18 @@ insert =
     .pcs-positive = Pozitif bir sayı gerekir.
     .pcs-positive-int = Pozitif bir tamsayı gerekir.
     .pcs-help = Canlı kesitin korunan tarafındaki noktaları çizgilerle izler.
+    .attdef-on-screen = Ekranda belirt
+    .attdef-insertion-point = Ekleme Noktası
+    .attdef-insert-field = Alan ekle
+    .attdef-text-settings = Metin Ayarları
+    .attdef-align-below = Önceki öznitelik tanımının altına hizala
+    .attdef-define = Tanımla
+    .attdef-edit-title = Öznitelik Tanımını Düzenle
+    .attdef-edit-help = Bir öznitelik tanımının etiketini, istemini ve varsayılan değerini değiştirir.
+    .attdef-help = Bir öznitelik tanımlar: blok tanımına metin olarak yerleştirilen etiket, istem ve varsayılan değer.
+    .attdef-define-attributes = Öznitelik Tanımla
+    .attdef-manage-attributes = Öznitelikleri Yönet
+    .attdef-set-base-point = Taban Noktası Belirle
 model =
     .create = Oluştur
     .boolean = Boole işlemleri

locales/zh-CN/opencadstudio.ftl

@@ -4003,6 +4003,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = 创建
     .boolean = 布尔运算

locales/zh-TW/opencadstudio.ftl

@@ -4015,6 +4015,18 @@ insert =
     .pcs-positive = Requires a positive number.
     .pcs-positive-int = Requires a positive integer.
     .pcs-help = Traces the points on the kept side of a live section as lines.
+    .attdef-on-screen = Specify on-screen
+    .attdef-insertion-point = Insertion Point
+    .attdef-insert-field = Insert field
+    .attdef-text-settings = Text Settings
+    .attdef-align-below = Align below previous attribute definition
+    .attdef-define = Define
+    .attdef-edit-title = Edit Attribute Definition
+    .attdef-edit-help = Changes the tag, prompt and default value of an attribute definition.
+    .attdef-help = Defines an attribute: a tag, prompt and default value placed as text in a block definition.
+    .attdef-define-attributes = Define Attributes
+    .attdef-manage-attributes = Manage Attributes
+    .attdef-set-base-point = Set Base Point
 model =
     .create = 建立
     .boolean = 布林運算