feat(modify): commercial solutions keyword options for MOVE, COPY, FILLET, CHAMFER, OFFSET

MOVE: Displacement, Enter at the second point uses the base as the vector.
COPY: Displacement, mOde (Single/Multiple), Undo of the last copy.
FILLET: Undo of the last fillet (the command refreshes its entity cache
through the new CadCommand::on_document_undone hook after the host undoes
the document step). CHAMFER: Multiple and Undo. OFFSET: Erase (the offset
replaces its source), Layer (Current/Source), Undo, Exit.
POLY3D, TRACE, MIRROR and MEASUREGEOM expose the keywords they already
accepted as options, so the context menu and option buttons list them.

The pinned prompt now keeps informational bracket groups such as
"[3 objects]" and only drops real option listings when the buttons take over.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

locales/ar-SA/opencadstudio.ftl

@@ -249,6 +249,7 @@ command-move =
            *[other] { $count } كائن
         }]:
     .target = MOVE  حدد الوجهة  [الأساس { $x },{ $y }]:
+    .displacement = MOVE  حدد الإزاحة:
 
 command-copy =
     .array-count = COPY  أدخل عدد عناصر المصفوفة:
@@ -271,6 +272,8 @@ command-copy =
             [many] { $count } نسخة حتى الآن
            *[other] { $count } نسخة حتى الآن
         } | مصفوفة | Enter=إنهاء | الأساس { $x },{ $y }]:
+    .displacement = COPY  حدد الإزاحة:
+    .mode = COPY  أدخل خيار وضع النسخ [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = نصف قطر منكسر

locales/bg-BG/opencadstudio.ftl

@@ -245,6 +245,7 @@ command-move =
            *[other] { $count } обекта
         }]:
     .target = MOVE  Посочи местоназначение  [база { $x },{ $y }]:
+    .displacement = MOVE  Задайте преместване:
 
 command-copy =
     .array-count = COPY  Въведи брой елементи за масив:
@@ -259,6 +260,8 @@ command-copy =
             [one] { $count } копие досега
            *[other] { $count } копия досега
         } | Масив | Enter=готово | база { $x },{ $y }]:
+    .displacement = COPY  Задайте преместване:
+    .mode = COPY  Въведете режим на копиране [Single/Multiple] <Multiple>:
 common =
     .jogged-radius = Радиус с чупка
     .none-use-shortcuts-set-key-command =   (няма — използвай: SHORTCUTS SET <клавиш> <команда>)

locales/cs-CZ/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } objektů
         }]:
     .target = MOVE Zadejte cíl [základ { $x },{ $y }]:
+    .displacement = MOVE  Zadejte posunutí:
 
 command-copy =
     .array-count = COPY Enter počet položek do pole:
@@ -258,6 +259,8 @@ command-copy =
             [one] zatím { $count } kopie
            *[other] zatím { $count } kopií
         } | Pole | Enter=hotovo | základna { $x },{ $y }]:
+    .displacement = COPY  Zadejte posunutí:
+    .mode = COPY  Zadejte režim kopírování [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Zalomený poloměr

locales/de-DE/opencadstudio.ftl

@@ -245,6 +245,7 @@ command-move =
            *[other] { $count } Objekte
         }]:
     .target = MOVE  Zielpunkt angeben  [Basis { $x },{ $y }]:
+    .displacement = MOVE  Verschiebung angeben:
 
 command-copy =
     .array-count = COPY  Anzahl der Elemente im Array eingeben:
@@ -259,6 +260,8 @@ command-copy =
             [one] bisher { $count } Kopie
            *[other] bisher { $count } Kopien
         } | Array | Eingabe=fertig | Basis { $x },{ $y }]:
+    .displacement = COPY  Verschiebung angeben:
+    .mode = COPY  Kopiermodus eingeben [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Geknickter Radius

locales/el-GR/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } αντικείμενα
         }]:
     .target = MOVE  Ορίστε προορισμό  [βάση { $x },{ $y }]:
+    .displacement = MOVE  Ορίστε μετατόπιση:
 
 command-copy =
     .array-count = COPY  Δώστε πλήθος στοιχείων διάταξης:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } αντίγραφο μέχρι τώρα
            *[other] { $count } αντίγραφα μέχρι τώρα
         } | Διάταξη | Enter=τέλος | βάση { $x },{ $y }]:
+    .displacement = COPY  Ορίστε μετατόπιση:
+    .mode = COPY  Επιλέξτε λειτουργία αντιγραφής [Single/Multiple] <Multiple>:
 
 common =
     .revolve-created-objects-failed-sources = REVOLVE: δημιουργήθηκαν __ocs_arg_created__ αντικείμενα· __ocs_arg_failed__ αρχικά αντικείμενα δεν μπόρεσαν να περιστραφούν.

locales/en-US/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } objects
         }]:
     .target = MOVE  Specify destination  [base { $x },{ $y }]:
+    .displacement = MOVE  Specify displacement:
 
 command-copy =
     .array-count = COPY  Enter number of items to array:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } copy so far
            *[other] { $count } copies so far
         } | Array | Enter=done | base { $x },{ $y }]:
+    .displacement = COPY  Specify displacement:
+    .mode = COPY  Enter a copy mode option [Single/Multiple] <Multiple>:
 
 common =
     .none-use-shortcuts-set-key-command =   (none — use: SHORTCUTS SET <key> <command>)

locales/es-ES/opencadstudio.ftl

@@ -245,6 +245,7 @@ command-move =
            *[other] { $count } objetos
         }]:
     .target = MOVE  Especifique el destino  [base { $x },{ $y }]:
+    .displacement = MOVE  Precise desplazamiento:
 
 command-copy =
     .array-count = COPY  Introduzca el número de elementos de la matriz:
@@ -259,6 +260,8 @@ command-copy =
             [one] { $count } copia hasta ahora
            *[other] { $count } copias hasta ahora
         } | Matriz | Enter=terminar | base { $x },{ $y }]:
+    .displacement = COPY  Precise desplazamiento:
+    .mode = COPY  Indique modo de copia [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Radio con recodo

locales/fi-FI/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } objektit
         }]:
     .target = MOVE Määritä kohde [tukikohta { $x },{ $y }]:
+    .displacement = MOVE  Määritä siirtymä:
 
 command-copy =
     .array-count = COPY Enter taulukon kohteiden määrä:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } kopio tähän mennessä
            *[other] { $count } kopiot tähän mennessä
         } | taulukko | Enter=valmis | pohja { $x },{ $y }]:
+    .displacement = COPY  Määritä siirtymä:
+    .mode = COPY  Valitse kopiointitila [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Katkaistu säde

locales/fr-FR/opencadstudio.ftl

@@ -245,6 +245,7 @@ command-move =
            *[other] { $count } objets
         }] :
     .target = MOVE  Spécifiez la destination  [base { $x },{ $y }] :
+    .displacement = MOVE  Spécifiez le déplacement :
 
 command-copy =
     .array-count = COPY  Saisissez le nombre d'éléments du réseau :
@@ -259,6 +260,8 @@ command-copy =
             [one] { $count } copie jusqu'ici
            *[other] { $count } copies jusqu'ici
         } | Réseau | Entrée=terminer | base { $x },{ $y }] :
+    .displacement = COPY  Spécifiez le déplacement :
+    .mode = COPY  Entrez le mode de copie [Single/Multiple] <Multiple> :
 
 common =
     .jogged-radius = Rayon raccourci

locales/hi-IN/opencadstudio.ftl

@@ -241,12 +241,15 @@ area =
 command-move =
     .base = MOVE  आधार बिंदु निर्दिष्ट करें  [{ $count } ऑब्जेक्ट]:
     .target = MOVE  गंतव्य निर्दिष्ट करें  [आधार { $x },{ $y }]:
+    .displacement = MOVE  विस्थापन निर्दिष्ट करें:
 
 command-copy =
     .array-count = COPY  ऐरे में आइटमों की संख्या दर्ज करें:
     .base = COPY  आधार बिंदु निर्दिष्ट करें  [{ $count } ऑब्जेक्ट]:
     .array-target = COPY  { $count }-आइटम ऐरे के लिए दूसरा बिंदु निर्दिष्ट करें  [आधार { $x },{ $y }]:
     .target = COPY  गंतव्य निर्दिष्ट करें  [अब तक { $count } प्रतियाँ | ऐरे | Enter=पूर्ण | आधार { $x },{ $y }]:
+    .displacement = COPY  विस्थापन निर्दिष्ट करें:
+    .mode = COPY  कॉपी मोड विकल्प दर्ज करें [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = मोड़ वाला त्रिज्या माप

locales/hu-HU/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } objektumok
         }]:
     .target = MOVE Adja meg a rendeltetési helyet [bázis { $x },{ $y }]:
+    .displacement = MOVE  Adja meg az eltolást:
 
 command-copy =
     .array-count = COPY Enter a tömbben lévő elemek száma:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } példány eddig
            *[other] { $count } példányok eddig
         } | tömb | Enter=kész | alap { $x },{ $y }]:
+    .displacement = COPY  Adja meg az eltolást:
+    .mode = COPY  Adja meg a másolási módot [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Tört sugarú méret

locales/it-IT/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } oggetti
         }]:
     .target = MOVE Specificare la destinazione [base { $x },{ $y }]:
+    .displacement = MOVE  Specificare spostamento:
 
 command-copy =
     .array-count = COPY Enter numero di elementi da mettere in serie:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } copia finora
            *[other] { $count } copie finora
         } | Serie | Enter=completato | base { $x },{ $y }]:
+    .displacement = COPY  Specificare spostamento:
+    .mode = COPY  Specificare modalità di copia [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Raggio spezzato

locales/ja-JP/opencadstudio.ftl

@@ -242,6 +242,7 @@ command-move =
     .base =
         MOVE  基点を指定  [{ $count } 個のオブジェクト]:
     .target = MOVE  移動先を指定  [基点 { $x },{ $y }]:
+    .displacement = MOVE  変位を指定:
 
 command-copy =
     .array-count = COPY  配列複写する項目数を入力:
@@ -249,6 +250,8 @@ command-copy =
         COPY  基点を指定  [{ $count } 個のオブジェクト]:
     .array-target = COPY  { $count } 項目の配列複写の2点目を指定  [基点 { $x },{ $y }]:
     .target = COPY  移動先を指定  [これまでに { $count } 個複写 | 配列 | Enter=完了 | 基点 { $x },{ $y }]:
+    .displacement = COPY  変位を指定:
+    .mode = COPY  コピーモードを入力 [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = 折れ曲がり半径

locales/ko-KR/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } 객체
         }]:
     .target = MOVE 대상 지정 [기본 { $x },{ $y }]:
+    .displacement = MOVE  변위 지정:
 
 command-copy =
     .array-count = COPY Enter 배열할 항목 수:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } 지금까지 복사
            *[other] { $count } 지금까지의 사본
         } | 배열 | Enter=완료 | 베이스 { $x },{ $y }]:
+    .displacement = COPY  변위 지정:
+    .mode = COPY  복사 모드 옵션 입력 [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = 꺾인 반지름

locales/nl-NL/opencadstudio.ftl

@@ -245,6 +245,7 @@ command-move =
            *[other] { $count } objecten
         }]:
     .target = MOVE  Geef de bestemming op  [basis { $x },{ $y }]:
+    .displacement = MOVE  Geef verplaatsing op:
 
 command-copy =
     .array-count = COPY Voer het aantal items in de reeks in:
@@ -259,6 +260,8 @@ command-copy =
             [one] { $count } kopie tot nu toe
            *[other] { $count } kopieën tot nu toe
         } | Reeks | Enter=gereed | basis { $x },{ $y }]:
+    .displacement = COPY  Geef verplaatsing op:
+    .mode = COPY  Geef kopieermodus op [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Geknikte straal

locales/pl-PL/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } obiekty
         }]:
     .target = MOVE Określ miejsce docelowe [podstawa { $x },{ $y }]:
+    .displacement = MOVE  Określ przesunięcie:
 
 command-copy =
     .array-count = COPY Enter liczba elementów do tablicy:
@@ -258,6 +259,8 @@ command-copy =
             [one] { $count } kopia do tej pory
            *[other] { $count } kopii do tej pory
         } | Tablica | Enter=gotowe | baza { $x },{ $y }]:
+    .displacement = COPY  Określ przesunięcie:
+    .mode = COPY  Podaj tryb kopiowania [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Promień łamany

locales/pt-BR/opencadstudio.ftl

@@ -245,6 +245,7 @@ command-move =
            *[other] { $count } objetos
         }]:
     .target = MOVE  Especifique o destino  [base { $x },{ $y }]:
+    .displacement = MOVE  Especifique o deslocamento:
 
 command-copy =
     .array-count = COPY  Informe a quantidade de itens da matriz:
@@ -259,6 +260,8 @@ command-copy =
             [one] { $count } cópia até agora
            *[other] { $count } cópias até agora
         } | Matriz | Enter=concluir | base { $x },{ $y }]:
+    .displacement = COPY  Especifique o deslocamento:
+    .mode = COPY  Informe o modo de cópia [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Raio com desvio

locales/ru-RU/opencadstudio.ftl

@@ -246,6 +246,7 @@ command-move =
            *[many] { $count } объектов
         }]:
     .target = MOVE  Укажите точку назначения  [база { $x },{ $y }]:
+    .displacement = MOVE  Укажите перемещение:
 
 command-copy =
     .array-count = COPY  Введите число элементов массива:
@@ -262,6 +263,8 @@ command-copy =
             [few] создано { $count } копии
            *[many] создано { $count } копий
         } | Массив | Enter=готово | база { $x },{ $y }]:
+    .displacement = COPY  Укажите перемещение:
+    .mode = COPY  Задайте режим копирования [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = Радиус с изломом

locales/tr-TR/opencadstudio.ftl

@@ -238,12 +238,15 @@ area =
 command-move =
     .base = MOVE  Temel noktayı belirtin  [{ $count } nesne]:
     .target = MOVE  Hedef noktayı belirtin  [temel { $x },{ $y }]:
+    .displacement = MOVE  Yer değiştirmeyi belirtin:
 
 command-copy =
     .array-count = COPY  Dizideki öğe sayısını girin:
     .base = COPY  Temel noktayı belirtin  [{ $count } nesne]:
     .array-target = COPY  { $count } öğeli dizi için ikinci noktayı belirtin  [temel { $x },{ $y }]:
     .target = COPY  Hedef noktayı belirtin  [şimdiye kadar { $count } kopya | Dizi | Enter=tamam | temel { $x },{ $y }]:
+    .displacement = COPY  Yer değiştirmeyi belirtin:
+    .mode = COPY  Kopyalama modu seçin [Single/Multiple] <Multiple>:
 
 common =
     .none-use-shortcuts-set-key-command = (none – use: SHORTCUTS SET <key> <command>)

locales/zh-CN/opencadstudio.ftl

@@ -240,12 +240,15 @@ area =
 command-move =
     .base = MOVE  指定基点  [{ $count } 个对象]：
     .target = MOVE  指定目标点  [基点 { $x },{ $y }]：
+    .displacement = MOVE  指定位移:
 
 command-copy =
     .array-count = COPY  输入阵列项目数：
     .base = COPY  指定基点  [{ $count } 个对象]：
     .array-target = COPY  为 { $count } 项阵列指定第二点  [基点 { $x },{ $y }]：
     .target = COPY  指定目标点  [已复制 { $count } 个 | 阵列 | 回车=完成 | 基点 { $x },{ $y }]：
+    .displacement = COPY  指定位移:
+    .mode = COPY  输入复制模式选项 [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = 折弯半径

locales/zh-TW/opencadstudio.ftl

@@ -244,6 +244,7 @@ command-move =
            *[other] { $count } 個物件
         }]：
     .target = MOVE  指定目標點  [基點 { $x },{ $y }]：
+    .displacement = MOVE  指定位移:
 
 command-copy =
     .array-count = COPY  輸入陣列項目數：
@@ -258,6 +259,8 @@ command-copy =
             [one] 目前 { $count } 個複本
            *[other] 目前 { $count } 個複本
         } | 陣列 | Enter=完成 | 基準點 { $x },{ $y }]：
+    .displacement = COPY  指定位移:
+    .mode = COPY  輸入複製模式選項 [Single/Multiple] <Multiple>:
 
 common =
     .jogged-radius = 折彎半徑