Multiple now follows the reference flow: every pick after the first is
made equal right away under `Select object to make equal to first:` and
Enter ends the command with `Length of objects made equal` (or `Radius
…`). A typed coordinate at one of the command's object prompts picks the
object under that point instead of being refused as a point.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Equal was applied through a generic gather-then-apply flow and, with the
default size-retaining solve mode, never changed anything: the solver
held both sizes and the relation could not be met. Now:
- GCEQUAL joins ECONSTRAINT and GEOMCONSTRAINT Equal; both objects are
picked inside the command (`Select first object or [Multiple]:`,
`Select second object:`; Multiple gathers `Select objects to make equal
to the first:`), a selection made beforehand is not used, a miss says
`No object found.` and re-asks, an unsupported object or the same object
twice is reported and re-asked, a repeat is refused.
- The follower is resized in place before the relation is added: a line or
straight polyline segment keeps its start and direction and its end
moves to the first object's length; a circle or arc keeps its center and
takes the radius.
- During edits the side that is not being edited follows the same rule:
its size is not retained, its start (or center) and other vertices are
held and its direction kept, so only its length or radius changes; a
chain of Equal relations follows along.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The first empty-space click of the 2Points flow was only resolved against
the document together with the second one, so "No valid constraint point
found." appeared one pick late. The command now hands the first pick to
the host (`CmdResult::CheckHorizontalPoint`), which resolves it right away:
a miss reports and re-asks for the first point, a hit moves on to the
second point.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Follow-up to #1341:
- interactive UCS offers Face / OBject; bare UCS OBJECT starts an entity pick
- one UcsPickCommand serves both FACE and OBJECT
- ucs_from_normal calls the existing arbitrary-axis helper instead of a copy
- prompt catalogue key and en-US text follow the new option list
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
1) VCONSTRAINT (and the new GCVERTICAL name) uses the axis constraint flow:
"Select an object or [2Points] <2Points>:", 2Points mode with the
reference's re-prompts and messages, and the same object types as
Horizontal — line, polyline segment, text, MText, ellipse axis.
2) Object mode turns the object about its first vertex; a two-point relation
across two objects slides the second object rigidly onto the axis.
3) Re-applying an axis constraint reports that the constraint already
exists; Vertical follows the UCS Y direction.
4) The constraint bar draws Vertical as the reference's axis mark, with the
point marker for a two-point relation.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
1) FXCONSTRAINT (and the new GCFIX name) prompts "Select point or [Object]
<Object>:" — a pick fixes that constraint point; Enter or O asks for one
line, polyline segment, circle, arc, ellipse or spline; misses and
unsupported objects report the reference messages and re-prompt.
2) Point, block, text, MText, attribute and table insertion points are
addressable constraint points.
3) Re-applying Fixed to the same point or object reports that the constraint
already exists instead of adding a duplicate.
4) A persistent Fixed holds its pre-edit geometry through MOVE, ROTATE,
SCALE, STRETCH, grip and Properties edits: fixed points stay, free points
of a partly fixed entity follow the edit, and size retention skips fixed
entities.
5) Object mode on a polyline fixes the picked segment (natively persisted)
instead of the whole polyline; arc segments pin endpoints, center and
radius.
6) Ribbon label "Fix" with a padlock icon.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Draw a profile, extrude it, then sketch on a face of the result: the
operations were all there, but nothing turned a solid's face into the
active drawing plane, so the second half of that loop was unreachable.
UCS FACE takes a surface pick, finds the planar face under it and
builds the plane from the face normal. X comes from the Arbitrary Axis
Algorithm, so the same face always yields the same X axis and a sketch
drawn on it does not spin when the UCS is rebuilt.
UCS OBJECT adopts a planar entity's own stored axes instead of
re-deriving X, so a sketch started from a circle lines up with how
that circle is stored. It reuses the profile extraction EXTRUDE
already runs, which means anything extrudable can also be sketched on.
Bare UCS FACE starts an interactive pick that resolves through the
same inline handler, so the clicked and typed paths cannot diverge.
MOVE: Displacement, Enter at the second point uses the base as the vector.
COPY: Displacement, mOde (Single/Multiple), Undo of the last copy.
FILLET: Undo of the last fillet (the command refreshes its entity cache
through the new CadCommand::on_document_undone hook after the host undoes
the document step). CHAMFER: Multiple and Undo. OFFSET: Erase (the offset
replaces its source), Layer (Current/Source), Undo, Exit.
POLY3D, TRACE, MIRROR and MEASUREGEOM expose the keywords they already
accepted as options, so the context menu and option buttons list them.
The pinned prompt now keeps informational bracket groups such as
"[3 objects]" and only drops real option listings when the buttons take over.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Show the styled dimension and its value while placing a dimension, using
the same builder the command commits with. Each creation command
(DIMLINEAR, DIMALIGNED, DIMANGULAR, DIMRADIUS, DIMDIAMETER, DIMARC,
DIMJOGGED, DIMORDINATE, DIMCONTINUE, DIMBASELINE, QDIM) reports the
dimensions it would commit at the current stage through
`CadCommand::dimension_preview`. The application applies the current
creation style, or the base dimension's style for DIMCONTINUEMODE=1,
and the same viewport measurement scale as commit, then tessellates the
transient entity through the normal dimension renderer.
While the second definition point is being acquired, a hovered model
snap supplies a provisional viewport scale; once both points are fixed,
hovering another viewport does not change the value. Angular dimensions
never receive length compensation. Degenerate geometry, an invalid
scale, or conflicting viewports fall back to the plain rubber-band
preview so no misleading value is shown.
DIMLINEAR / DIMALIGNED / DIMRADIUS / DIMDIAMETER / DIMANGULAR created on a
sheet now report the model measurement of the geometry seen through a
viewport, at any viewport scale, while definition points, the dimension line
and the text stay in paper coordinates and the annotation keeps its sheet
size (DIMSCALE is untouched).
A viewport frame is a similarity - uniform scale plus in-plane twist - so
projecting the model span onto the paper axis and compensating gives exactly
the raw paper measurement times 1/scale. No geometry is rewritten: the
compensation is persisted once as a negative DIMLFAC override on the
dimension and applied once by the linear formatter, so preview text,
dimension text, the properties measurement row and DXF/DWG export all agree.
User measurement multipliers fold into the same magnitude, and an explicit
text override still bypasses formatting entirely, so it is never re-scaled.
Angular dimensions are never compensated - a similarity preserves angles.
Mixed input (one point through viewport A, another through viewport B or on
the sheet) is refused rather than silently mis-measured: the command line
explains why and the dimension falls back to plain paper measurement.
A dimension measured through a viewport is left unassociated: its definition
points are projected paper coordinates, so inferring a paper-space
association would bind it to geometry that is not there. PR3 records the real
dimension -> viewport -> entity chain.
The result is one ordinary dimension entity carrying one style override, so
undo/redo works through the existing history with no new out-of-document
state.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Contract module for the viewport snapping, viewport dimension measurement,
and dimension association work that builds on it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Hakan Seven