#1666 sets group 295 on extrusion history records, which makes the kernel
read the embedded profile and path where they stand and ignore the
matrices. The planar fallback profile (a region-derived LWPOLYLINE) was
stored in its plane's local frame with the frame as matrix, so with the
flag it rebuilt at the origin. Re-express it in its own OCS (normal and
elevation) when the record is built.
Pins the kernel and graph at upstream (opencadkernel#84 merged as f051138)
instead of the ramox81/cadkernel [patch].
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1681 places a dimension's picture block by its insertion point, rotation
and scale. Edits (move/rotate/scale/mirror, copy, paste) transform the
picture's sub-entities in world space, and the codec's dimension transform
moves the insertion point too, so a rotated or copied dimension would get
the placement applied twice. Fold the placement into the subs before the
edit and leave the dimension at the identity placement afterwards.
The picture insert no longer takes the dimension's extrusion: OCS bakes
picture sub-entities in world coordinates, so only the stored insertion
point goes through the OCS. A zero insertion-scale component counts as 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The informational clippy job fails on two pre-existing literals
(also failing on main, surfaced on this PR's merge): the trim
tangency test's angle list used 3.14 where pi was meant — use the
constant; the point-cloud light-direction fixture in render.rs uses
a hand-tuned 0.318 component that only looks like 1/pi — keep the
tuned value and allow the lint on that statement.
Resolve conflicts from main's rustfmt pass by taking main's versions of
command.rs, style.rs, view/mod.rs, scene/mod.rs, ui/window/mod.rs and
ui/properties.rs and re-applying this branch's Graphic Attributes changes.
Add the Graphic Attributes strings to the new lo-LA catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E1QnME6WJbD5iGFae1eeCb
The pill number used the first-content fallback while the label and sync badge used explicit-only resolution, showing e.g. a 1:50 number beside a 1:1 label with no badge. Label and badge now resolve through target_viewport_handle like the number; render-path handle fn, set-paths and Model branches untouched. Tests: scale_pill_sources_agree_without_targeted_viewport (RED: live probe Some(0.02)/1:1/None) plus Model-unchanged pin. Full suite: 2027 passed / 0 failed / 25 ignored.
A lofted surface's region cross sections are recorded as the curve round
each region, as the reference records them; a region recorded as a
region made the reference refuse to open the drawing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The reference writes none; a draft distance on an extruded surface made
it re-extrude the surface with a taper when the profile changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The polyline round a region is written about the region's normal in its
object coordinates with an identity transform, as the reference writes
it; a rebuild from the history placed a polyline given in plane
coordinates with a frame at the wrong place once the region moved. Arcs
of one circle making a whole turn are recorded as that circle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A swept, extruded or revolved surface made from a region records the
region as the curve round it, as the reference does: a lone circle or
whole ellipse as itself, a loop of lines and arcs as a closed polyline in
the region's plane. A region recorded as a region made the reference
refuse to open the drawing (modeling error 58000).
A region read by an associative action carries the step its edge names
belong to (ACAD_STEPID), so the reference finds the edges again and the
surface follows the region.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The surface extrusion, the extrusion along a path, revolve history and
embedded profiles refused a region whenever it had more than one display
wire, which a region of several edges always has. They now refuse only a
region with holes, and a region's loops for a solid extrusion come from
its modeler edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A region keeps one display wire per edge, so a region of several edges
gave no polygon and could not be extruded (solid or surface), and a
circle region was extruded from its display polygon. Profiles of a region
with one boundary loop now come from the region's modeler edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A region of several edges kept its display wires one per edge, so the
surface extrusion found no polygon and refused it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new drawing carries the visual styles the reference's new drawing has
in its visual style dictionary. -VIEW sEttings Visual style offers them
(2dWireframe as "2D Wireframe") and a saved view starts with the 2D
Wireframe style.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A swept, extruded, revolved or lofted surface made from a region now
reads the region through one geometry dependency per edge, each naming
its edge by a persistent subentity id recorded in the drawing's
subentity manager, so the surface follows the region. A lofted surface
keeps one continuity and bulge value per cross section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dimension carries its graphics in a block of its own, drawn in that
block's frame, and the entity records where the frame sits. The renderer
inserted it at the origin instead, so every dimension whose file carries a
non-zero insertion point drew far from the geometry it measures — the whole
picture offset by that point. Dimensions inside block definitions are where
this shows: a drawing of plan blocks scattered their dimension graphics
thousands of units away, over empty sheet.
The picture now follows the dimension's insertion point, rotation, scale and
extrusion, the way any block reference is placed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A drawing whose plan content is built from blocks reaches thousands of
definitions, and each one took a buffer of its own for its segments and
another for its constants, plus one per placement run. The payloads are a
few hundred bytes, but every allocation costs a page: 14k definitions ask a
device for 1.8 GB to hold 12 MB of geometry. D3D12 runs out, the failed
allocations stay invalid, every later frame writes to them, and the session
dies in the staging belt.
The definitions of a build now share one arena: constants in a single
uniform buffer addressed by dynamic offset, segments in a single geometry
buffer addressed by first_vertex, placements in a single instance buffer
addressed by first_instance, with another arena started whenever one of the
three would outgrow the per-buffer budget. The cache holds the records
rather than the buffers, so a build the device rejected poisons nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
SURFACEASSOCIATIVITY now keeps EXTRUDE, REVOLVE and LOFT surfaces linked to
their sources: the profile (and axis object) or cross sections are kept, the
surface is made again when they change, and the drawing's associative
network carries an action with the extruded, revolved or lofted surface
action body, its path parameters and value parameters as the reference
writes them. Swept, extruded, revolved and lofted surfaces can read
splines (NURBS edge curve, fit-point splines through their fit points)
and ellipses (elliptical edge curve). Associative surfaces of a file
opened here follow their sources too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- refresh_associative_sweeps runs on every edit and scanned the xdata of
every entity; it now returns at once when no associative swept surface
exists (its application is not registered) and looks at surfaces only.
- An arc's end angle was raised by TAU in a loop, which never ends on a
huge angle from a damaged file; the sweep is taken with rem_euclid.
- The sweep DELOBJ test expected surface sweeps to delete their sources,
which #1663 changed on purpose: an associative surface keeps them.
- codec c9ffcac (opencadcodec #103) adds an explicit viewport-off bit: the
viewport on state is read with is_on() and set with turn_on()/turn_off()
everywhere, so a viewport the file marks off shows off and can be turned
back on from Properties.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The reference cannot open a drawing whose extrusion history has a taper
and leaves the profile frame to be computed (ErrorStatus 53). Extrusion
and press-pull records now set group 295, as the reference writes them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SWEEP: base point from the path; kernel sweep validity fixes
The fork pin the PR carried ([patch] to ramox81/cadkernel 30b3810) is
resolved to upstream instead: kernel 99b6b48 (opencadkernel #78-#83),
codec c9ffcac (opencadcodec #102, #103), graph 7f6aae7, in every manifest.
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Add Section 19 benchmarks covering camera pan viewport uniform updates,
spatial hover candidate search, and viewport data assembly scaling
- Add navigation telemetry probes in src/perf.rs (active only when
PERF=1) to track frame interval, batched input moves, and layout-draw gap
underlay_resolution_stale() was requesting continuous redraw frames at
display refresh rate even when no raster underlays were present in the
drawing. Cache has_underlays conservatively on Scene and early-return
false when no underlays exist, eliminating the idle tick leak.
A single profile's base point comes from the path it is swept along: a
path leaving the profile's plane from inside the profile sweeps it where
it stands. Kernel 30b3810: pcurves in the edge's parameterisation (valid
spline-faced sweeps), corner crossings fitted to the modeller's
resolution, run faces through stations evenly spaced along the run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Language gains lo-LA, labelled ລາວ in every catalog, so the new
translation can be chosen.
- Two Lao keys under stale names now use the catalog's names, and the
touchpad option added since gets its Lao label.
- The web build gets a Lao font (Noto Sans Lao, generated like Thai) and
routes Lao and Thai drawing text to their fonts; Thai had a font but
was never routed to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts were additions on both sides, kept together: the Count palette
and Sheet Set toggles next to the Graphic Attributes toggle in the ribbon,
main's new locale groups and catalog entries next to graphic-attributes,
and module declarations. The palette code follows main's crate renames
(acadrust -> codec, cadkernel -> kernel).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Revert formatting, import/module reordering and unrelated rewrites
outside the feature (command.rs, style.rs, paper.rs, view/mod.rs,
properties.rs, dialog.rs, ValuePromptCommand); the new SVG icons stay.
- Move the palette logic out of dialog.rs into update/graphic_attributes.rs.
- Replace 14 loose app fields and ~50 Message variants by
GraphicAttributesState (one Menu enum for the open drop-down) and a
nested GraphicAttributesMsg / GradientMsg, like BlockPaletteMsg.
- Share the selection -> line/fill handles -> unlocked edit path, reuse
valid_block_name, the ribbon lineweight handler and fill_handles, and
drop the unused GradientColorToggle, color_open and LineLinetypeScaleInput.
- Linetype scale accepts any positive value (e.g. ISO pen widths 0.13,
0.18, 0.25, 0.35) instead of rounding to 0.1 with a 0.1 minimum.
- Closing open boundaries and creating the fill is one undo step.
- The close prompt also answers typed Y/N + Enter, a bare Enter (Yes)
and Escape (cancel), not only the option buttons.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- An open path is swept from its end nearest the pick point (in plan), as
the reference does; the record keeps the original path and the placed
frame marks the start.
- Kernel from ramox81/cadkernel 1df75f5: one face per path run for
twisted, scaled and spline sweeps, placed records swept from the placed
end, end caps without pcurves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hakan Seven