Mirrored INSERTs reverse OCS handedness, but acadrust's explode used to
keep the original normal — making CCW-around-normal arcs and ellipses
sweep the wrong way. The fix lives in acadrust 7c711e9, which flips the
new normal when det < 0 and reprojects center/major_axis/angles into the
new OCS. H7CAD's fix_mirrored_arc workaround is no longer needed.
Use reflection (TAU - sa, TAU - ea) for CW arcs and span.abs() for
segment count, consistent with the CircularArc pattern in both
hatch boundary (mod.rs) and tessellate (tessellate.rs).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Color was read from the stale HatchModel cache instead of the live
entity, so property-panel color changes appeared on boundaries (wire)
but not on the hatch fill pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Parsing + DerivedCaches construction now runs entirely in a dedicated
OS thread inside open_path(). FileOpened handler only assigns the
pre-built caches, keeping the UI thread free during file load.
- Add build_derived_caches(): parallel hatch + mesh tessellation via rayon
- Extend Message::FileOpened / open_path return type with DerivedCaches
- Drop populate_*_from_document() calls from FileOpened handler
- Hatch pattern_scale multiplied by annotation_scale in model space so
pattern density stays consistent when CANNOSCALE changes
- Annotative check now uses AcAnnoPO xdata (R2007+ marker) instead of
relying solely on group-code-293 flag; falls back to is_annotative
for files with no xdata (old DXF backward compat)
- acadrust patched to local path for is_annotative field
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Scale popup dropdown replaces cycle behavior; paper-space viewport scale
editable when a viewport is active/selected
- CANNOSCALE persisted via DXF $USERR1 (read on open, write on save)
- PSLTSCALE: linetype dash lengths scaled by viewport anno_scale so dashes
appear uniform physical size in paper space
- MultiLeader: arrow size, dogleg length, and text height scale with
anno_scale; leader line paths (world coords) stay fixed
- Leader: arrow size and hookline length scale with anno_scale; also
corrects world_offset subtraction that was previously deferred to the
TruckObject::Lines path
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Block INSERTs are expanded into sub-entity wires for rendering but the
OSNAP Insertion hint at the block reference origin was never generated.
Now a zero-geometry WireModel carrying the Insertion snap hint is appended
so OSNAP Insertion mode can locate the block origin.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Debug output revealed the sheet viewport has id=0 (DWG reader never sets
the field), scale=0.8965 (not ≈1.0, so the 0.02 tolerance missed it),
and center=(0.0, 0.0) — exactly at the paper-space origin.
In DWG format the overall/sheet viewport always has its center at the
origin. Content viewports are placed at their actual paper positions and
always have a non-zero center. Switching from the scale heuristic to the
center-position check makes the detection reliable regardless of what
scale value the sheet viewport happens to carry.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Remove unused `screen_delta_to_world` camera method (superseded by the
corrected pan_active_viewport formula).
Fix `is_content_viewport`: the old geometry fallback required the viewport
center to be near the origin, but DWG files never write the viewport id
field (stays 0) and the sheet viewport center is the paper centre
(e.g. 105, 148.5 mm for A4) — not the origin. This caused the sheet
viewport to be classified as a content viewport in DWG files, making it
both tessellated (border visible) and enterable via double-click.
The new heuristic uses only the scale: a sheet viewport has scale ≈ 1:1
(view_height ≈ paper height); true content viewports have deliberate
drawing scales (1:50, 1:100, …) that are far from 1.0.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The old formula (distance × 0.001) was a fixed approximation that ignored
the paper camera's current zoom level and the viewport's paper-space size,
causing panning to feel sluggish.
New formula: model_per_pixel = (2 × paper_half_h / canvas_height) × (view_height / vp_height)
This converts screen pixels → paper-space mm → model units correctly,
making the content follow the cursor regardless of paper zoom or scale.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Entity linetype_scale is a per-entity multiplier applied on top of the
document-level $LTSCALE header variable. The previous code used only the
entity scale (defaulting to 1.0), ignoring $LTSCALE entirely. Drawings
with a non-default LTSCALE showed dash patterns at the wrong size.
Effective scale is now: document.header.linetype_scale * entity linetype_scale.
Applied in both render::render_style_for and the complex-linetype path in
tessellate_entity.
Fixes part of #10
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two layout-related fixes:
1. Sheet viewport (id=1) was rendered as a grey rectangle border in
paper-space layouts. It is the paper boundary, not a user viewport,
and should not appear. Now filtered via is_content_viewport() before
tessellation. The redundant id==1 color branch is removed.
2. Box crossing-selection (right-to-left drag) only detected wires whose
vertex points fell inside the selection box. Large entities like viewport
frames could be visually crossed without any corner inside the box and
would not be selected. Added segment-box edge intersection tests so any
wire segment that crosses the selection rectangle boundary is included.
Fixes part of #10
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
paper_limits() now reads paper_width/paper_height/plot_rotation from the
Layout object (populated by a patched acadrust from the embedded DWG
PlotSettings). This fixes layouts where min/max_limits do not match the
physical paper size (e.g. A4 portrait content inside A3 landscape limits).
DXF files use codes 44/45/73 from raw_plot_settings_codes; DWG files use
the PlotSettings block embedded in the LAYOUT object. Both fall back to
min/max_limits when paper_width is zero.
Depends on HakanSeven12/acadrust feat/layout-paper-dimensions (PR #21 on
hakanaktt/acadrust); using that fork until the PR is merged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Save camera to named View table entries (H7CAD_Camera_Model / H7CAD_Camera_<layout>)
on every navigation change; restore from these entries on file open and tab switch.
acadrust's DWG writer overrides *Active VPort view_height/view_center with
zoom-extents values, but leaves the View table untouched, so this survives save.
- Fix pitch recovery: clamp vd.z to [-1, 1] instead of [-0.999, 0.999] so that
asin(1.0) = π/2 exactly for plan/top views, preventing the subtle tilt on reload.
- Fix IEEE 754 edge case: atan2(+0, -0) = π for plan view direction (0,0,1);
special-case yaw = 0 when both vd.x and vd.y are near zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
view_dir = rotation * Z = (sin(yaw)*cos(pitch), -cos(yaw)*cos(pitch), sin(pitch))
so yaw = atan2(x, -y), not atan2(x, y).
The sign error caused a 180-degree Z rotation on every save/reload cycle.
Applies to apply_active_vport_camera, apply_sheet_viewport_camera, and
camera_for_viewport.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- On file open and layout tab switch, restore the camera from the
document's saved view (*Active VPort for model space, sheet viewport
for paper space) instead of fitting to wire bounds.
- After any zoom/pan/rotate, write the new camera position back to the
document and mark the file dirty so it is saved with the file.
- Uses last_synced_camera_gen to avoid marking the file dirty on the
initial camera restore.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Model entity wires are tessellated with world_offset subtracted for GPU
precision, but view_target/view_center were raw model coordinates.
Subtracting world_offset from view_target aligns both coordinate systems
so model content projects correctly into viewport rectangles in paper space.
Also fixes scale priority (view_height before custom_scale) and adds
view_center DCS offset to the projection, completing the paper-space
viewport rendering.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The acadrust DWG reader never assigns a viewport id (always 0).
Some DXF exporters use id=-1 for all viewports. In both cases the
previous id > 1 check excluded every viewport from content rendering.
Replace is_user_viewport_id(id) with is_content_viewport(vp) that
uses a geometry heuristic for unknown ids (0 / negative):
- id=1 → always sheet viewport (excluded)
- id≥2 → always user viewport (included)
- id=0 or id<0 → sheet if center≈(0,0) AND scale≈1.0, else user
This allows DWG files and non-standard DXF files to display model
content inside their paper-space viewports and be entered via
double-click.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two root causes prevented paper-space viewports from loading correctly:
1. acadrust's ViewportStatusFlags::from_bits() maps bit 0 → is_on, but
the real DXF/DWG spec uses bit 15 (0x8000) for "viewport on". Post-load
fixup in io/mod.rs now corrects this for both DXF and DWG files: when
bit 0 is clear but bit 15 is set, is_on is forced true and locked is
derived from bit 14 (0x4000).
2. Some DXF exporters write id=-1 for all viewport entities instead of the
standard id=1 (sheet) / id≥2 (user) convention. The is_user_viewport_id()
helper now treats any id ≠ 0 and ≠ 1 as a user viewport, covering both
the standard id≥2 and the non-standard id=-1 cases.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Model-space entities shown through a viewport were tessellated using
paper_bg_color (light), but the interactive viewport pane renders them
on bg_color (dark), causing white/black entities to appear incorrectly.
- model_wires_for_viewport: tessellate with bg_color so the viewport
pane (dark background) gets correctly adapted entity colors
- viewport_content_wires: re-adapt projected wire colors using
paper_bg_color before rendering onto the paper canvas
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
White entities on light backgrounds (e.g. paper space) render as black;
black entities on dark backgrounds (e.g. model space) render as white.
All other colors pass through unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Paper-space entities (wires, hatches, wipeouts) live in sheet
coordinates (~mm scale) and do not need the model-space centring
shift. world_offset was incorrectly subtracted from their coordinates,
displacing all paper-space geometry away from the paper sheet.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
hatch_model_from_dxf(), solid_hatch_model(), and wipeout_boundary_2d()
were converting DXF world-space coordinates directly to f32 without
subtracting world_offset. After the world_offset change moved all wire
geometry to local space, hatches/solids/wipeouts rendered at the wrong
position (displaced by the centroid offset, up to ~4M m for Turkish UTM).
All three functions now accept world_offset and apply it to every
boundary vertex before the f64→f32 cast.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three root causes caused all geometry and UCS arrows to disappear:
1. TruckObject::Lines and TruckObject::Text variants returned world-space
f32 coordinates without applying world_offset, so fit_all() computed
bounds spanning from local space to UTM world space (~4 M m), placing
the camera impossibly far from all visible geometry.
2. Ray/XLine entities with unnormalized direction vectors (common in some
DXF exporters) produced astronomically large far-point coordinates
(up to 1e28) that overwhelmed the camera fit even after the offset fix.
Fixed by normalizing the direction vector before multiplying by
DISPLAY_EXTENT.
3. Origin-stuck corrupted entities (coordinates ≈ 0 in world space become
≈ -world_offset in local space) pulled the fit_all() bounds far from
the actual drawing. Fixed by computing local_extent_max from EXTMIN/EXTMAX
(10× safety margin) and skipping points outside that range in fit_all().
Additional hardening: wire_gpu.rs now skips ±inf segments (not just NaN),
and snap_pts/key_vertices in all TruckObject variants are offset-corrected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Subtracts the DXF header extents centroid (world_offset) from all coordinates
in f64 BEFORE casting to f32. This eliminates the ~0.5 m ULP error that occurs
at 4,000,000 m UTM coordinates and caused geometry to disappear on zoom-out.
- Scene: adds world_offset field + compute_and_set_world_offset() method
- tessellate.rs: threads world_offset through all f64→f32 conversions
(legacy_geometry, dimension_geometry, solid_wire_fallback, multileader)
- truck_tess.rs: to_local() helper already in place from prior session
- mod.rs: tessellate_entity() and entity_aabb() apply world_offset
- update.rs: compute_and_set_world_offset() called after doc load
- cmd_result.rs / solid3d_cmds.rs: pass correct offset to truck tessellators
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Spline: if flags.closed/periodic and B-spline endpoints don't meet,
add an explicit closing Wire segment to eliminate the visual gap.
- Hatch BoundaryEdge::Spline: evaluate the B-spline at 16 uniform
parameter samples (de Boor via truck BSplineCurve) instead of
plotting raw control points as a polyline; falls back to control-
point polyline for degenerate knot/degree inputs.
- Ellipse arc key_vertices and LWPolyline midpoint grips committed
separately; this commit wraps the spline-related fixes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Block sub-entities with ByBlock color now inherit their INSERT's resolved
color instead of rendering as the default white. ByBlock linetype inherits
the INSERT's linetype pattern, and ByBlock lineweight inherits the INSERT's
effective line weight.
Implemented via render_style_for_block_sub(), called in tessellate_entity()
when expanding INSERT exploded entities.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Standalone hatches and hatches from block inserts were rendered
regardless of entity invisible flag, layer off/frozen state, or
whether the owning INSERT belongs to the current layout block.
- Filter self.hatches by invisible, layer, and belongs_to_visible_block
- Skip INSERT entities that are invisible, on a hidden layer, or outside
the current layout block before exploding their contents
- Skip individual hatches produced by explode that are invisible or on
a hidden layer
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
paper_canvas_wires() now returns Arc<Vec<WireModel>> backed by
paper_canvas_cache (epoch-keyed). Pan/zoom frames hit the cache and
return a pointer copy; only geometry changes rebuild the wire list.
Completes the paper-canvas caching chain (L+M): sheet cache →
projected-per-viewport cache → full canvas Arc cache.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add two epoch-keyed caches to eliminate per-frame work in paper-space layouts:
paper_sheet_cache — caches wires_for_block(layout_block) as Arc<Vec<WireModel>>.
Previously paper_sheet_wires() re-tessellated all paper-space entities (title
block, annotations, viewport borders) on every mouse-move frame. Now it is an
O(1) Arc clone. entity_wires_arc() reuses the same cache so a geometry-change
frame triggers only one tessellation pass even when both the GPU renderer and
the Iced canvas are active.
paper_projected_cache — caches projected+clipped wires per viewport handle.
viewport_content_wires() now uses model_wires_for_viewport_arc() for the
tessellation step (already O(1) via viewport_wire_cache) and stores the
projection+clip result keyed by (vp_handle, epoch). Navigation frames
(pan/zoom on the paper sheet) are O(N_viewports) Arc/slice copies instead of
O(N_entities × N_points × N_viewports) tessellate+project work.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add `aabb: [f32; 4]` field to WireModel (world-space 2-D bounding box).
In tessellate_entity() set each wire's AABB from e.as_entity().bounding_box()
via new entity_aabb() helper; Insert sub-entities each get their own AABB.
Preview/interim wires and any entity returning a zero-extent default box get
UNBOUNDED_AABB so they are never pre-rejected.
Replace the chord-sphere heuristic in Snapper::wire_in_range() with a proper
AABB vs snap-circle overlap test. The new check is four scalar comparisons and
correctly handles closed curves (circles, arcs) which the chord-sphere approach
had to special-case.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Option I: add per-viewport Arc wire cache so paper-space viewport rendering
no longer re-tessellates model content every frame.
Option J: hit_test_wires() returns Arc<Vec<WireModel>> — O(1) pointer copy
in model space instead of a full Vec clone on every mouse move during commands.
paper_canvas_hatches/wipeouts() now route through the epoch caches added in F.
Option K: add world_snap_r + wire_in_range() pre-check to Snapper::snap().
All Endpoint/Midpoint/Nearest/Perpendicular/Intersection loops skip wires
whose chord sphere is outside the snap circle using O(1) scalar comparisons,
eliminating O(entities × vertices) matrix multiply cost when zoomed in.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add Arc<Vec<...>>-backed epoch caches for hatches, wipeouts, images, and
meshes — the same pattern used for wires. build_primitive() now returns
an O(1) Arc refcount bump on navigation frames instead of rebuilding
every collection from scratch.
Also wrap ImageModel.pixels in Arc<Vec<u8>> so cloning an ImageModel is
O(1) regardless of image resolution.
Navigation frames no longer copy pixel data, tessellated hatch boundaries,
or mesh geometry — all per-frame CPU work on unchanged geometry is now
eliminated.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Extract tessellate_one body into a Send-compatible free function
tessellate_entity, then drive it with rayon::into_par_iter() in
wires_for_block(). Spreads file-open and post-edit tessellation across
all CPU cores. Navigation frames are unaffected (Options A/B cache
eliminates per-frame tessellation entirely).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace the O(objects) linear scan inside wires_for_block() with a
sort_cache keyed by geometry_epoch. On a cache miss the index is built
once by scanning all document objects; subsequent calls within the same
epoch do an O(1) HashMap lookup (block_handle → entity→sort map).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add two complementary render caches that make mouse navigation essentially
free regardless of file size:
Option A – Wire tessellation cache: entity_wires_arc() caches the
tessellated Vec<WireModel> keyed by geometry_epoch and returns an Arc,
so navigation frames (no preview wires) incur zero Vec clones and zero
tessellation work. Primitive::wires changed to Arc<Vec<WireModel>>.
Option B – GPU buffer cache: Pipeline stores cached_epoch; prepare()
skips all upload_wires/hatches/images/meshes calls when the epoch is
unchanged, writing only the 192-byte camera uniform instead.
geometry_epoch is a process-wide AtomicU64 incremented by every Scene
mutation (add/erase entity, selection, layer visibility, layout switch,
populate_*, grip, transform, copy, clear, preview wires). Using a global
counter rather than a per-scene counter prevents two tabs that happen to
have the same local bump count from sharing a cached_epoch value, which
was causing the first file's geometry to remain on screen after opening a
second file.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
White paper fill was calculated from entity bounding boxes (paper_entity_extents),
so adding a viewport caused the paper to visually shrink to the viewport's bounds.
Now paper_limits() (layout min/max limits) is used directly, and the unused
paper_entity_extents() function is removed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- paper_entity_extents() computes the bounding box of actual DXF entities
so the white fill always matches the drawn title-block / frame borders,
regardless of whether Layout min/max_limits match entity positions
- Falls back to paper_limits() (→ A4 297×210) when layout has no entities
- Removed paper_boundary_wire: the white fill now acts as the visual paper
edge so the near-white wire (invisible on white) was redundant
- LayoutCreate sets limits to A4 landscape immediately after add_layout()
to override acadrust's imperial default (12×9)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- paper_limits() falls back to A4 landscape (297×210mm) even when no
Layout object exists in the document
- paper_bg_color default changed to white [1,1,1,1] (paper surface color)
- PaperCanvas::draw() fills canvas with dark desk color first, then draws
the paper area rectangle in paper_bg_color so the sheet is clearly
visible against the desk background
- view.rs container background uses the fixed desk color instead of
paper_bg_color so it no longer conflicts with the paper-surface color
- BACKGROUND RESET for paper space now resets to white instead of dark gray
- Removed unused PaperSheet variant, paper_sheet() constructor,
build_paper_sheet_primitive() and associated match arms (dead code
after 2D canvas replacement)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- viewport_screen_rect now mirrors PaperCanvas::draw()'s camera-based
to_px transform instead of using a fixed paper-limits scale, so the
3D overlay lands exactly over the drawn viewport border at any zoom/pan
- blue border frame (stack layer above the shader) makes the active
viewport boundary always visible even when it fills the canvas
- space-mode pill in MSPACE now dispatches LayoutSwitch("Model") so
clicking it jumps to full Model Space instead of just exiting to PSPACE
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
