Annotative text in DWG/DXF holds the model height of its default
(native) scale representation; other scales draw it at the ratio of the
two. OCS read the stored value as paper height and multiplied it by the
annotation scale again, so text from AutoCAD came out far too small
(#1734), and annotative text OCS wrote came out too small in AutoCAD.
- Rendering uses the active/native context ratio (1 when the object has
no representation for the displayed scale).
- TEXT with an annotative style asks for the paper height, stores the
model height of the creation scale and gets that context; MTEXT
starts from the model height; ANNOUPDATE converts a fixed style
height the same way.
- Properties: the Height row of annotative TEXT and MTEXT is the paper
height at the displayed scale, with the model height beside it, and
an edit converts back. MTEXT shows Annotative when it has contexts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With nothing selected, Shift+MMB orbit pivoted on the surface at the
view centre, so grabbing a small part off-centre flung the model away.
It now pivots on the solid or mesh surface under the pointer where the
drag began, falling back to the view centre and then the camera target
(#1389).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import AutoCAD PGP aliases and support UCSFOLLOW workflows. The UCS
conflict keeps main's click-origin flow (axis preview, Enter accepts
the placed axes) and takes the PR's prompt and option keywords.
PROPERTIES only flipped the visibility flag, so a Properties pallet in
an edge's inactive group or behind auto-hide stayed out of sight. It
now opens through the dock, which brings its group forward. In clean
screen the pallet shows on top without changing its normal state;
leaving clean screen drops that overlay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Options > Files lets the fonts and plot style folders move elsewhere,
such as a share a whole team uses (Change... / Default). Fonts are then
looked up and downloaded there, and plot style tables listed and saved
there; the choice is kept in the profile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Changing a TEXT's style in the Properties panel only swapped the font, so
a style that differs in its fixed height, width factor or oblique angle
seemed to change nothing. The text now takes the style's fixed height
(when it sets one), width factor and oblique angle, and an MTEXT the
fixed height.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both commands gain a mOde option [Quick/Standard]. Quick (the default)
starts ready to pick, every object a cutting or boundary edge; Standard
starts by selecting those edges, Enter with none taking every object.
The choice is TRIMEXTENDMODE (1 Quick, 0 Standard), kept in the profile
and settable with SETVAR.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Restoring a layer state while a layout viewport is active now applies it
to that viewport alone, as viewport freezes and viewport overrides for
colour, linetype, lineweight and transparency (where they differ from the
layer, or an override is already there). On/off, lock and plot have no
per-viewport form and still apply to the drawing.
Viewport colour overrides are packed as the format does (0xC3 index,
0xC2 true colour); reading them now honours that type byte, so an index
override from a file no longer shows as a near-black true colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- block-def strings in every locale (English until translated); the
catalog test requires each locale to carry them.
- A new block's base point starts at 0, and ATTMAN / BATTMAN report a
drawing without attributed blocks; the tests expect that now.
- Lines over 100 columns wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The count was keyed on the gathering command's address, so a command
boxed where the previous one was (MOVE right after MOVE) inherited its
selection and reported its first pick as a duplicate. Drop the report
whenever no command is running.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Selection: report what each pick found while a command gathers objects
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# src/locale_catalog.rs
The guard remembered only the last announced (tab, generation), so
switching A -> B -> A announced A's load again. Each tab now carries
its own pending flag, set when a document is installed and cleared by
the boundary dispatch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The color_book_dirs setting is gone. Colour books live in color_books in
the config folder (book::folder()), like the other fixed locations;
Options > Files shows it through Folders::color_books. read_all() and
load_from_dialog() use that folder directly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
Options > Files lists the color book folder as a read-only row with Open
folder, like Plot styles or Fonts. The Add folder / Remove buttons, their
messages and the explanatory line (in all 22 locales) are gone; the
folder list stays in the settings for a later location option.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
book::load_from_dialog (pick, read, copy into the first folder) and
book::read_all (built-in book plus every .acb in the folders) move out of
update/mod.rs, which now just calls them. Same behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
- book::add_or_replace adds a colour book or replaces one of the same
name, for both reading the folders and loading a file.
- style.rs: the Plot Style and View Background colour targets use
math::color_rgb (and hex_string) instead of their own conversions.
- Ribbon: one layer_color lookup for Ribbon::active_layer_color and the
ribbon's ByLayer swatch.
- Picker: one swatch() for the Index and Document swatches, fill_of() for
"colour or gray" and divider() for the 1 px separators.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
- Arrow keys only walk the colours on screen: the Document tab's search
results, and the Color books matches while searching (the whole book,
page after page, otherwise). One helper per tab now gives the visible
colours to both the view and the arrow keys.
- show_identity no longer returns an unused bool; ink() absorbs its
one-use ink_is_dark helper.
- document::layer_identity joins a layer's book and colour name, used by
the Document scan and the panel's current colour instead of two copies.
- Recently-used sorting looks a colour's rank up once (sort_by_cached_key)
instead of on every comparison.
- Searching compares case-insensitively without allocating a lower-case
copy of every name on each redraw (ASCII queries).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
- Colour books now come from folders, like AutoCAD's Color Book
Locations: Options > Files lists them (add, open, remove); by default
one color_books folder in the config directory. The Color Books tab
shows the built-in books plus every .acb in those folders; Load copies
the chosen file into the first folder. Web: session only, as before.
- Grid/list buttons use the app's toggle style (light accent, its text
colour for the icon, same corners as inactive).
- Color Books: the load button sits right of the book list; the search
box keeps its start over the page strip and runs to the end.
- Translations for the two new Options strings in all 22 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
ByLayer swatches were always gray. The Select Color panel's Current/New
band and info line now show the colour of the layer the colour is for
(the newest selected object's layer, or the current layer for new
objects); the ribbon's colour control and the ByLayer row of its colour
dropdown show the current layer's colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
-BLOCK, -WBLOCK, -BEDIT, ATTSYNC, BASE and INSBASE follow the reference
prompts and messages; empty blocks; WBLOCK keeps object coordinates and
stores INSBASE; annotative and hyperlink data on the block record; block
preview images; remembered dialog choices; block aliases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
- True Color opens in RGB; the gradient field, hex and nearest index sit
at the bottom so CMYK's fourth slider doesn't move them; slider rows
closer together.
- Document tab: grid or list view (list drawn like the colour-book bars),
and Name A–Z / Z–A sorting (translated in all locales). Swatches of
colour-book colours show the colour's name.
- A colour-book colour picked as the current colour (nothing selected)
keeps its BOOK$NAME on the objects drawn with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
The count line now uses the objects the selection step itself picked
(a click, a window or crossing, a lasso, a fence, Last / Previous /
All): "N found (D duplicate), M total" when some were chosen already,
"N found, R removed, M total" in remove mode, "N found, M total" when a
removal picks objects that were not chosen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lines still showing when the pointer reaches the overlay history no
longer fade under it; leaving restarts their COMMANDLINEFADETIME.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save records the entered model viewport (or the sheet) as the layout's
last active viewport, and opening the layout enters it again with its
UCS. Picks up the codec fix that kept a last-active link from being read
as the sheet viewport (codec d57097c, kernel b40fa59, graph 2360341).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The docked panel and Quick Properties render the same rows from one
state, so a picked colour opened both dropdowns and each swallowed the
other's click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A ten-minute time::every on wasm piles up long setTimeouts in the shared
wasmtimer driver until it stops waking every timer, which silenced the
automation channel and drop-open about 8 s after load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A lone Alt shows a code on every ribbon tab and quick-access button.
Typing a tab code opens the tab and shows the codes of its buttons,
dropdowns, slide-outs and collapsed panels; a button code runs it, a
dropdown or slide-out code opens it and shows its item codes, Esc goes
back one level. Codes follow the reference ribbon; buttons without a
reference counterpart get none and unnamed menu items are numbered.
Codes are drawn as accent pills over the widgets that reported their
bounds in the current frame, with a hint bar under the ribbon. While
the tips are open keys go to them only. The automation gets a keytips
action and read operation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Create a new named definition from current session edits, restore the source checkpoint, and continue editing the copy with fresh local history. Add the name dialog and Save dropdown, clone supported owned metadata onto independent handles, and refuse unsupported relationships atomically.
REFEDIT opens a dialog after the pick: the nesting chain as chips with a
preview of the chosen definition, all objects or picking them in the
drawing, attribute definitions (offered only when the definition has
them), locking objects outside the working set and unique names for an
external reference's named objects. The settings are remembered.
With unique names an xref's dependent layers, linetypes, text styles and
blocks are checked out as $N$NAME records of their own; without, under
the plain name, sharing a host record of that name. Save writes them back
under the reference's names, and the records made for the session are
removed when it closes. -REFEDIT uses the remembered settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
