Every entity file ended with the same three-trait wrapper block:
impl Grippable for T {
fn grips(&self) -> Vec<GripDef> { grips(self) }
fn apply_grip(&mut self, ...) { apply_grip(self, ...) }
}
impl PropertyEditable for T { ... }
impl Transformable for T { ... }
— 23 lines of pure delegation around five same-named free functions.
Replace with `crate::impl_entity_basics!(T);` (a macro in
entities/traits.rs that expands to the three trait impls).
Applied where the file already follows the free-fn delegation
convention (Arc, Circle, Ellipse, Insert, Leader, Line, LwPolyline,
MultiLeader, Ole2Frame, Point, Spline, Viewport). Files that inlined
the trait method bodies directly (Ray, XLine, Shape, Solid, Tolerance,
MLine, Mesh, Solid3D/Region/Body, Table, RasterImage, Wipeout,
Underlay, Hatch, Polyline, Polyline2D, Polyline3D, Dimension) left
alone — they already skip the indirection. Text/MText/Attribute use
the with-text-style flavour and will move once that variant is needed
beyond the existing two manual impls.
A second macro `impl_entity_basics_with_text_styles!` is included for
the text-like flavour but no entity uses it yet.
Net: -204 lines.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The same DXF/DWG bulge → (center, radius, sweep) formula was inlined
in six places (hatch outline, polyline tess + truck path, lwpolyline
×4, scene hatch fill, explode bulge_to_arc) — each with subtly
different sweep-direction handling for the bulge sign.
Add `entities::common::BulgeArc { center, radius, start_angle,
end_angle, sweep }` with one `from_bulge(p0, p1, bulge)` constructor
and a `sample(t)` helper. Callsites collapse to a few lines.
Net: -121 lines, one canonical sweep-direction convention shared by
all consumers.
array.rs (the path-along-curve f32 helper) keeps its inline math —
its sign convention is inverted relative to the others and changing
it without exercising the array-path command risks regressing the
output.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Two free helpers in app/commands.rs lived as big match-on-EntityType
blocks: massprop_entity (Circle/Arc/Line/LwPolyline/Ellipse area +
perimeter + centroid, ~140 lines) and entity_text_content /
replace_entity_text (Text/MText/AttributeDefinition/AttributeEntity).
Move each to its own trait in entities/traits.rs and implement
per-entity:
MassPropsCalc — Circle, Arc, Line, LwPolyline, Ellipse
TextContent — Text, MText, AttributeDefinition, AttributeEntity
EntityTypeOps gets dispatch shims that route to the trait via the
existing macro, so callsites just call entity.mass_props() /
entity.text_content() / entity.replace_text(search, rep).
The remaining free helpers in commands.rs (entity_list_details,
entity_extra_info, entity_type_name, build_data_extraction_csv) are
single-command formatting helpers tightly coupled to LIST / EXTRACT /
text-format output. Distributing them as per-entity methods would
inflate every entity file with command-side formatting concerns
without making the command-side any cleaner — left in place.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Five chunks moved out of the 5965-line scene/mod.rs to live with the
entities they belong to:
- wide_lwpolyline_fills → entities/lwpolyline.rs::wide_fills
- wide_polyline2d_fills → entities/polyline.rs::wide_fills
- polyline_segment_fill → entities/common.rs (shared by both above)
- text_obb_corners_native + text_baseline_points + text_greek_obb_tris
→ entities/text_support.rs (handles Text/MText/Attribute alike)
- append_insert_attribute_wires → entities/insert.rs
Net: scene/mod.rs 5965 → 5404 lines (~560 lines extracted). Three
helpers in scene/render.rs / scene/block_cache.rs widened from
pub(super) to pub(crate) so the relocated functions can still reach
them. scene::entity_aabb also widened for the same reason.
scene::tessellate_entity_dim_text stays put — it's a thin wrapper
around the private tessellate_entity dispatcher and moving it would
require exposing tessellate_entity's full signature across the crate.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Entity converters were casting WCS coordinates to f32 before the renderer
subtracted world_offset, which destroyed sub-unit precision on drawings
sitting at large coordinates (typical UTM-style CAD files). The multileader
case made it visible — glyphs warped under rotation — but every entity
that emits TruckObject::Lines/SegmentedLines/key_vertices/fill_tris was
affected.
Type changes (in src/scene/acad_to_truck.rs):
- TruckObject::Lines / SegmentedLines: Vec<[f32; 3]> → Vec<[f64; 3]>
- TruckEntity::key_vertices / fill_tris: f32 → f64
All ~17 producer files updated to keep WCS coordinates in f64 right up to
the TruckEntity boundary. The consumer in scene/tessellate.rs now performs
`(x - ox) as f32` (f64 subtract, then cast) for points, key_vertices, and
fill_tris — preserving precision near the camera origin even when the
drawing sits at million-unit coordinates.
catmull_rom_pts (multileader spline) is now f64; the scene path widens its
offset-relative f32 ctrl points to f64 around the call and narrows back at
the output.
Notes:
- Table layout still uses glam::Vec3 (f32) internally; widened to f64 only
at the TruckEntity boundary for type compatibility. Separate cleanup to
switch its internal math to f64 is tracked.
- snap_pts and tangent_geoms remain f32 — they are UI feedback (snap
candidates, tangent hints) and the precision is sufficient there.
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Tessellates bottom + top paths with NaN-separated walls at each vertex.
Arc segments (bulge != 0) use 16-step parametric tessellation.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- fix: polyline arc center sign was inverted (- → +) causing arcs to render on the
wrong side in LwPolyline and Polyline2D
- fix: store glyph strokes in local space with f64 origin so world_offset subtraction
uses f64 precision; prevents blocky text at large UTM coordinates
- fix: Face3D fill darkened to 45% so edge wires are visually distinct from fill
- fix: wire batch vertex buffer chunked to 256 MB GPU limit (was panic on large files)
- fix: gpu_face3d_edges changed from Option<WireGpu> to Vec<WireGpu> to support chunks
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Partial ellipse arcs now populate key_vertices with both endpoints so
Endpoint snap works correctly. LWPolyline arc segments (bulge ≠ 0) get
a diamond grip at the arc midpoint; dragging it recomputes the segment
bulge via circumcircle of start/mid/end, giving interactive arc editing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Empty LwPolyline and single-control-point Spline fallbacks were calling
builder::line(&v, &v) with the same Rc vertex, triggering the
truck-topology panic "Two same vertices cannot construct an edge."
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
