Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
Per the upstream review of the XDATA-based storage: the host no longer writes
its own state into the saved file. The marker record under the host-owned OCS
APPID, the on-first-use APPID registration and the verbatim-EED rewrite
handling are removed; the single source of truth is a scene-scoped in-memory
set of entity handles (Scene::reference_only) that dies with the drawing tab,
so a reopened file starts undesignated and the owning plugin re-marks on the
document-opened notification.
All behaviour sites are unchanged, driven by the set: the wire stamp moves
from an XDATA read to a set lookup threaded through the tessellation
pipelines (tessellate_entity and the dimension text path take the handle set
as a plain parameter), and the pick filters, selection retains and
update/erase refusals read Scene::is_reference_only.
Undo keeps the entity-write contract: set mutations are recorded as explicit
first-touch before/after values on each history delta (the parametric-
constraints channel pattern). A designation inside a plugin push_undo scope
joins it, a scope-less change is one step of its own, an idempotent re-mark
records nothing, erasing a designated entity drops the set entry with the
entity, and undo/redo restores entity and designation together.
The round-trip test is inverted: reference_only_designation_is_not_written_
to_dwg_or_dxf now asserts the marker appears in neither format's bytes, that
no OCS APPID or marker record survives a reload, and that the designation
stays live in memory.
The HostApi gains set_reference_only(handle, reference_only): a plugin can
designate display geometry it owns and refreshes. The entity renders like any
other, but the built-in edit paths treat it like an entity on a locked layer,
while the owning plugin keeps full write access (update, erase, XDATA).
- Appended at the trait tail with a refusing default so plugins keep compiling
against older hosts; the loader gate range is untouched.
- IPC: SetReferenceOnly / SetReferenceOnlyResult round-trip through the
shared dispatch, the V3 client and the V4 client, with the shared document
cache invalidated on success.
- build.rs version_info and manifest API_VERSION bumped to 9 in lockstep.
- Evidence: reference_only_request_and_response_roundtrip (bincode round-trip
of the request and both response payloads).
The internal per-call push_undo fractured plugin-composed operations:
history has no nested scopes, so each push finished the plugin's
still-pending scope and opened its own — an operation of several
writes became several undo steps and the plugin's label was lost
(measured: 3 creates + update + delete in one scope = 5 steps).
Follow the entity-write contract instead: a mutation inside a
plugin-opened push_undo scope joins it, so the whole operation is a
single undo step under the plugin's label; a scope-less mutation opens
and finishes its own scope, keeping one undo step per call; refusals
record no undo step in either regime. Document the contract on the
trait methods and the host docs; the composition experiment becomes
the permanent xrecord_writes_join_a_plugin_initiated_undo_scope test.
Add create/read/update/delete/list for XRecord objects under
named-object-dictionary paths to the plugin HostApi, with five additive
PluginRequest/PluginResponse variants, dispatch through the shared
handler, in-process HostSession methods and both out-of-process proxies.
- dictionary paths walk from the NOD root; create seeds missing
dictionaries (ensure_image_dictionary bootstrap) and refuses existing
names; update refuses missing ones; refusals precede the undo step
- entry group codes validated (1..=369, never 5/105); payload content is
the plugin's own
- each mutating call is one undo step: the pending history snapshot
restores the objects map byte-exactly, auto-created dictionaries
included (tested)
- typed entries survive DWG and DXF write/reload round-trips (tested);
update drops verbatim raw bytes so saves emit the new content
- bump API_VERSION 7 -> 8 with the build.rs version_info in lockstep,
mirroring the v7 addition; MIN_SUPPORTED stays 3
Bug:
The typed ensure_plugin_state helper and the object-safe trait method
it wraps turned two recoverable conditions into process deaths. On the
in-process host, the helper downcast the stored state with
.expect("plugin state type mismatch for plugin_id"), so registering
state under one plugin_id as one type and later asking for another
(e.g. a reloaded plugin version changes the type while the per-tab
state map survives) panicked the host. On out-of-process hosts
(ipc/client.rs, ipc/v4/client.rs) and on NullHost, the trait method
itself was implemented as a bare panic!("ensure_plugin_state is not
supported for out-of-process plugins..."), so any out-of-process
plugin calling the documented helper crashed its own runner process -
even though the sibling plugin_state_any and plugin_state_any_mut
methods on those same implementations already degrade to None
gracefully. The helper also used .expect("init called once") on the
initialiser closure.
Reproduce:
1. Out-of-process: a plugin whose runner calls ensure_plugin_state
(&mut host, "my.id", ...).
2. Type mismatch: in an in-process plugin, ensure state under one id
as u32, then ensure a different type under the same id.
3. Before: step 1 kills the plugin runner at the trait panic; step 2
kills the host at the downcast expect. After: both get None, keep
running, and existing state is untouched.
Fix:
Give the trait method a failure channel: ensure_plugin_state_any now
returns Option<&mut (dyn Any + Send + Sync)>, mirroring the sibling
plugin_state_any_mut on the same implementations, and the typed helper
returns Option<&mut T> (any?.downcast_mut). The panicking
implementations (ipc v3, ipc v4, NullHost, and the three never-called
test dummies) return None; the in-process app host wraps its real
storage in Some with unchanged insert-or-return semantics. The init
closure is now guarded by take() with a unit-Any fallback, so even an
implementation invoking it twice fails the typed downcast instead of
panicking. Object safety, argument types and vtable slot are
unchanged; external plugin sources get a compile error at the helper
and adopt Option handling on rebuild. Regression tests use catch_unwind
so they compile against both signatures: one per panic site (out-of-
process, NullHost, type mismatch), each additionally asserting the
None result and that pre-existing state survived.
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1469 inserted `CommitMany` and `CommitManyAndEnd` between `Commit`,
`CommitAndEnd` and `Done`. `CommandStep` crosses the plugin IPC, which
encodes a variant by its position, so a plugin built against the previous
API that answered `Done` would have been read as `CommitAndEnd` — or
rejected as undecodable — by the new host. The two variants now sit after
`Cancel`, as the other additions to the v7 wire types do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bundled `opencad.python` plugin drives OCS through plugin API v7: all
43 canvas entity kinds, the drawing tables, and OCS's own commands run
step by step. RustPython stays in the plugin process — the plugin crate is
outside the workspace with its own lock file, so the application's own
dependencies are unchanged.
Reconciled with the plugin command work that landed as #1425, which the
branch was written before:
- Both added `impl Drop for PluginProcessInteractiveAdapter`, which git
merges silently into two impls that do not compile. One body now
cancels the command and then drops it from the runner, in that order: a
plugin waiting on a step has to be released before the runner forgets
the command.
- `execute_command` (#1425) and `run_command` (#1423) are both routes from
a script to the command line, and only the second was guarded. The
SCRIPTCOMMANDS switch and the denylist are shared now, so neither route
is the unguarded one.
- `run_command` dispatched with plugin dispatch still enabled, so a script
naming a plugin command re-entered the plugin that was blocked waiting
for it. It sets the suppression flag for the length of the dispatch, as
`execute_command` does.
The denylist read the command as typed, while the dispatcher resolves
aliases: a user-defined `Q` for `QUIT` (ALIASEDIT writes those) walked
past it. It resolves the alias first.
Also: the active-command comparison ran on every message, a mouse move
included, allocating two strings for names that are already `&'static
str`; SCRIPTCOMMANDS' own messages go through the translation macros; and
`docs/.DS_Store` (now ignored) and an unrelated RTF note about constraint
commands are out of the tree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
HostApi::run_command drives the real OCS command through the same primitives
the automation channel uses, synchronously on the host thread: run a line,
start a command and answer point/text/token/entity/selection/enter prompts, or
cancel (closing anything the command opened). Refused while another command is
active, for a denylist (QUIT, NEW, OPEN, SAVE*, PY_* ...) and off the active tab.
Python: doc.command, doc.start_command and doc.modify (offset, trim, extend,
fillet, move, copy, rotate, scale, mirror, erase). Real-IPC audit checks exact
geometry for every wrapper plus guards and undo; IPC and Python unit tests; docs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
TableOperation gains simple-linetype create/modify/rename/delete (standard names
taken, rename follows layers and entities, guarded delete) and paper-space
layout create/rename/delete/set-current/set-page (default page setup and sheet
viewport, the application's own layout switch, Model protected). CTAB now reports
the current layout. Real-IPC audit with DWG/DXF persistence and undo, IPC and
Python unit tests, docs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BlockEntityAdd adds a validated entity to a block definition (owner set by the
host, same validation as a model-space entity, self-nesting inserts refused),
reusing the scene's block-editor routing. Deleting a block member now also
drops its handle from the block record. Real-IPC audit with an attribute
definition inside a block, DWG/DXF persistence and undo; IPC and Python unit
tests; docs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
TableOperation gains BlockCreate (copy entities into a definition shifted by the
base point, optionally erasing originals), BlockModify, BlockRename (inserts
follow) and BlockDelete (refused while referenced; removes members, markers and
orphaned draw-order tables). Real-IPC audit with DWG/DXF persistence and undo,
IPC and Python unit tests, docs; the DXF loss of the block description is pinned
by a canary.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extends TableOperation with text style create/modify, dimension style
create/modify (DimStyle fields as a validated JSON object), rename, delete and
set-current. Reuses OCS's style in-use scan and reference-following rename
(four style_ops methods widened to pub(super)); a renamed text style also
updates dimension styles that name it. Real-IPC audit with DWG/DXF persistence
and undo, IPC and Python unit tests, docs. Four cadcodec findings are pinned by
canaries.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds the additive v7 TableOperation request and HostApi::table_operation for
layer create/modify/rename/delete/set-current. Refusals are decided before the
undo step is recorded. Python wrapper, real-IPC audit with DWG/DXF persistence,
IPC round-trip test, Python unit test and docs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
EmbedPicture builds the frame with OCS's own EmbeddedImage and
build_embedded_ole, so the opaque storage is never scripted. PNG, JPEG and
BMP are stored as read and other formats are re-encoded as PNG. The lifecycle
test now creates through Python; a new test covers formats, aspect, origin,
layer and refusals.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
SolidOperation::Boolean runs synchronously, surfaces the kernel's refusal
with a plain reason and leaves the operands untouched, consumes them on
success unless keep_operands, and records one undo step. The lifecycle test
uses planar boxes with exact volumes and covers chaining, refusals, both
formats and undo; an ignored test shows a curved refusal reaching the script.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds SurfaceFromProfile and Extrude kernel operations (doc.solids.surface and
doc.solids.extrude), accepts surfaces in Transform, and maps Surface with
editable isolines. Fixes a real bug found by the test: the surface kind field
overwrote the entity-type kind key in Python dicts, so it is exposed as
surface_kind, with a catalog test guarding against name collisions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
RegionFromProfile reuses the REGION command's kernel calls; doc.solids.region
exposes it with layer and delete_source options. The lifecycle test builds
regions from real circle and polyline entities and covers refusals, a move,
both formats and undo. create_entity now accepts coordinate tuples for point
properties and every generated float setter accepts Python ints.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
An additive HostApi::solid_operation builds cadkernel primitives and applies
rigid transforms, verifying each result lifts back losslessly and refusing a
payload it cannot lift. Exposed as doc.solids in Python; Solid3D, Body and
Region are mapped read-only with the opaque payload preserved. The lifecycle
test passes through the real runner with analytic volumes and exact extents as
oracles, DWG and DXF reopen with re-edit, and undo restores exactly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Add LayerConfig struct and add_layer / modify_layer methods to HostApi trait
- Implement IPC request/response serialization for AddLayer and ModifyLayer
- Implement HostSession methods with CAD property defaults and selective modification
- Refresh layer panel UI and invalidate scene layer dependencies upon layer changes
- Add unit tests for add_layer with defaults and partial modify_layer
- Drop crates/ocs_doc_api from workspace and host dependency.
- Remove src/app/doc_api.rs and its module declaration.
- Strip DocApi v2 undo/dispatch plumbing from HostSession.
- Remove HostApi::doc_api_dispatch default method.
- Remove PluginRequest::DocApiRequest / PluginResponse::DocApiResponse.
- Revert plugin API version from 6 back to 5.
Add the typed document facade and plugin IPC adapter. Prepare bulk edits
before mutation, preserve undo and dirty state, keep profile elevations,
validate numeric inputs and session bindings, and generate Python constructors
with typed results.
Reuse existing entity transforms and profile conversion. Compute mass
properties and closed-surface bounds in cadkernel; pin its main revision
6a5e6fc2822f6af6b2611cd605b44437b35158f0. Keep plugin API metadata at version 6.
Validation: 646 native application tests, 597 kernel tests, 12 document API
tests, 91 plugin API tests, 3 Python tests, default/IPC feature builds and
wasm32 check passed.
OpenCADStudio/plugins#901 (comment)
- Add BuiltinPlugin::on_load(&mut self, host: &mut dyn HostApi) with a default
no-op implementation so existing plugins remain source-compatible.
- Invoke on_load once for V4 plugins immediately after the runner connects
and before entering the request loop, giving plugins a HostApi surface to
cache plugin_request_sender() or set up worker threads before any dispatch.
- V2/V3 plugins are unchanged: HostApi is only available during dispatch.
OpenCADStudio/plugins#901 (comment)
- Add HostApi::document_path(tab_id) returning Option<PathBuf>.
- Add PluginRequest::DocumentPath and PluginResponse::DocumentPath for
out-of-process plugins.
- Implement the request in the IPC server and in both V3/V4 plugin-side
HostApi proxies.
- Implement HostSession::document_path by looking up the tab by id and
returning its current_path.
Sync current main and companion codec changes before preserving unsupported frame rows, rendering in the entity plane, and sharing final layout metrics with placement preview.
#249 — plugin XDATA written via write_record survived only in memory: the
acadrust DWG writer dropped ExtendedData::records on save. Bump acadrust to
e88a9a6 (records now encode to EED and decode back on read) and fix the host
side that fed it:
- ensure_app_id allocates a real APPID handle; a null handle serializes as
0 and the EED reference can't resolve, so the XDATA vanished on reopen.
- write_record / remove_record drop stale raw_dwg_eed for the target app so
an edit made after a save/reopen wins over the pre-edit bytes.
#250 — out-of-process plugins got a throwaway document_mut() snapshot, so
edits to existing entities were silently discarded and deletion wasn't
expressible at all. Add the missing mutation surface:
- UpdateEntity / RemoveEntity IPC requests + HostApi::update_entity /
remove_entity (default in-process impls, RPC overrides on the client that
invalidate the stale document cache).
- Scene::update_entity replaces the entity in place, preserving its handle
and owning block, and reseeds only its derived caches; remove reuses the
cache-coherent erase_entities (which also honours layer locks).
- document_mut() is documented as a local-only snapshot out-of-process.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Follow-ups after merging the out-of-process plugin isolation work:
- Convert the out-of-process interactive adapter's `on_point` /
`on_entity_pick` to `glam::DVec3`, matching the `CadCommand` trait,
which moved to f64 pick coordinates. The branch predated that change
and no longer compiled against the trait.
- Contain plugin constructor panics in `export_plugin!`: the constructor
runs across the C ABI boundary in `ocs_plugin_register`, where an
unwinding panic is undefined behavior. Catch it and return null, which
the loader already treats as a failed registration.
- Reap killed runner processes. The spawn-timeout and disconnect paths
called `child.kill()` without `wait()`, leaving a zombie on Unix until
the host exited. Route both — and `shutdown()` — through a shared
`reap()` that kills and waits on a detached thread.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extend InteractiveCommand with needs_object_pick / on_object_pick so a
plugin tool can prompt the user to pick an existing entity (handle + point)
rather than a free point — the structure-pick path Storm Sewer's SS_PIPE
needs to connect existing structures. The host adapter delegates to the
internal entity-pick flow; over --serve the pick is fed as a hex handle.
Stays API v2 (no released plugin implements InteractiveCommand yet).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Sebastian