- Colour books now come from folders, like AutoCAD's Color Book
Locations: Options > Files lists them (add, open, remove); by default
one color_books folder in the config directory. The Color Books tab
shows the built-in books plus every .acb in those folders; Load copies
the chosen file into the first folder. Web: session only, as before.
- Grid/list buttons use the app's toggle style (light accent, its text
colour for the icon, same corners as inactive).
- Color Books: the load button sits right of the book list; the search
box keeps its start over the page strip and runs to the end.
- Translations for the two new Options strings in all 22 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
Options > Display gains Window Elements with "Show the menu bar"
(MENUBAR) and "Show the ribbon" (RIBBON / RIBBONCLOSE); Options > User
Preferences gains a Hatch switch for HPASSOC. The command line now
starts at 80 % opacity so the drawing shows through it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
COMMANDLINEOPACITY (20-100 percent, default 100) and a slider under
Options > Display make the floating command line's panels see-through,
so the drawing stays visible behind it. The input field stays opaque
for legibility. The value is an application setting that persists.
Refs #1494
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The gradient mode button is just its gradient, without a frame.
- In the gradient view H, S and B sit on the left and Hex on the right
of one row; the nearest index colour moves to the row below.
- Every colour swatch in Options opens the Select Color panel: the six
theme colours, crosshair, snap marker and command line text join the
three viewport backgrounds. BgTarget becomes UiColor, and one
color_swatch helper replaces the four hand-built swatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
- ColorEditor: the HSB / RGB / field editor and hex box, now shared by
the Select Color panel and the Options background swatches. Those
swatches open the panel without tabs or index colours, which removes
the iced_aw color_picker feature and the BgPicker messages.
- Sliders are iced's built-in slider and vertical_slider over a
gradient container; the custom GradientSlider widget is gone.
- Nearest index colour comes from opencadcodec's aci_table::nearest_aci.
- Eyedropper: a pipette at the right of the mode row hides the panel,
captures the window with iced's screenshot task and shows an 11x11
magnifier beside a crosshair; a click picks the pixel, Esc backs out.
Not offered on the web build.
- The hex box applies six-digit values while typing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The exponential camera step is the right call. `0.9 ^ delta` is strictly
positive for every real delta, in and out cancel exactly where the
subtraction lost a percent of the view on every round trip, and the file's
own header has promised an "exponential feel" since it was written. Three
surfaces were left behind it, and the wider range exposed a fourth thing.
The range of the system variable. 3 to 100 is the range ZOOMFACTOR has, and
the User Preferences page was built against it; `SETVAR ZOOMFACTOR` accepts
that and nothing else again. A faster wheel is the Options window's business
instead: the slider covers the variable's own range, the field beside it
reaches 500, and a read-out says what a notch actually does ("10.0% a
notch") so the number being set is readable rather than implied. A value
above 100 therefore lives only in this application's own configuration file,
where it is nobody else's to read, and a bare `SETVAR ZOOMFACTOR` still
reports it. The bounds and the clamp live in one place now
(`settings::clamp_zoom_factor`): four literal copies of `3, 100` are what
let a surface be missed in the first place.
A floating viewport in MSPACE. It zooms its own view through
`zoom_active_viewport`, which kept subtracting: the factor reached zero at
6.67 steps, so from ZOOMFACTOR 360 up every notch inside a viewport bottomed
out on the clamp — a tenfold jump a notch, and the top third of the slider
doing nothing at all. Exponential there too, from a base of 0.85 so the
default notch still moves a viewport the 15% it always has. Each surface
keeps its own long-standing feel rather than inheriting the other's.
The trackpad pinch. `pinch_zoom_steps` was calibrated against the
subtraction (`1 - step / 10 = 1 / (1 + m)`) so that a pinch of m leaves the
view exactly 1 + m times closer — the property docs/trackpad.md documents
and the reason the gesture tracks the fingers at all. Inverting the zoom law
by hand is what let the two drift apart, so the step is asked of the camera
now (`Camera::zoom_steps_for_ratio`), which cannot drift by construction.
`pinch_is_one_to_one` recomputed the old formula rather than the camera's,
so it kept passing through all of this; it zooms a real camera and measures
the distance it lands at instead.
Also: `zoom` had a floor and no ceiling, and zooming out multiplies. At
ZOOMFACTOR 500 a notch out is x2.4, so about ninety notches — a couple of
seconds of scrolling — ran the distance past what an f32 far plane
(`distance * 1000`) can hold, and the viewport went black on an infinite
projection. A degenerate pinch magnification of -1 or beyond reached the
same place through the other side. Both are bounded now.
Also: two doc comments quoted the linear law (`zoom_view_at_cursor` and the
one on `pinch_zoom_steps`), and docs/trackpad.md stated the pinch identity
and claimed the tests covered it against the camera. All updated, with what
a notch does and where each surface's range comes from written down.
Tests, each confirmed against the behaviour it describes: the zoom law at
every factor the application can hold (positive, monotonic in the setting,
in and out cancelling), the ceiling under a long scroll out in both
projections, the published inverse and what it does with a nonsense ratio,
the viewport factor and a real viewport zoomed three notches at the top of
the range, the SETVAR range including a value the Options field set, the
Options field (above 100, above the ceiling, cleared, not a number), its
agreement with the slider, Close putting both the value and the field back,
and the read-out's percentages. 1882 lib tests pass.
The two new Options strings are not in the locale catalog yet, so they
render in English until it is regenerated.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Options window used to commit every control the moment it was
touched, with no way back but re-editing. It now works like the Drafting
Settings window: changes still show at once (a theme, a cursor size or a
language is seen immediately), but nothing is committed until Apply or OK.
Close — and the window's × or Esc — puts everything back the way it was
when the window opened or Apply was last pressed, asking first when there
is something to lose.
The commit point is a snapshot of the persisted configuration plus the
drawing variables the 3D Modeling page edits (with the drawing's modified
flag), so every control the window has or gains is covered without being
registered; reverting re-applies the snapshot the way start-up does and
re-bakes text or regenerates solids when those settings moved.
The "unsaved changes" guard is now a shared modal helper used by both
windows.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- PSETUPIN / -PSETUPIN: with no arguments a file picker offers the chosen
drawing's named page setups in the Plot dialog; `PSETUPIN <file>` opens
the same chooser on that file; `PSETUPIN <file> *` or
`PSETUPIN <file> name,name` import straight away. Same-named setups are
replaced, the import is one undo step, and the report counts both.
- The Plot dialog's page-setup list gains "Import…": the chooser shows the
source drawing's setups with a tick each, All, Import and Cancel, and
selects the first imported setup afterwards. The source is read off the
UI thread with the same reader the editor uses for its own setups
(`scene::document_page_setups`), and handles that only meant something
in the source drawing (plot view, visual style) are dropped on import.
- Options → General → Plotting: "Show the page setup for new layouts"
opens the Plot / Page Setup dialog whenever a layout is created
(persisted with the plot preferences).
Tests: the document reader, the command (all / named / unknown / missing
file / undo) against a drawing saved by the app, the chooser flow, and the
new-layout option. Nine new strings in all 21 locales.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Display page could only take a typed #RRGGBB, which is precise but
no way to choose a colour by eye. The swatches are now buttons that
open a wheel.
The wheel does not replace the hex field, it sits beside it: typing an
exact value stays the quickest way to reproduce a known colour. On
submit it hands a hex string to the existing ModelSpaceBgChanged and
friends rather than writing the config itself, so the two routes
cannot drift apart on validation, persistence, or the MatchTheme
fallback an empty field triggers.
Also stops the Browser shipping in the default dock layout. It was
added to the right edge, which shifted the block palette to index 1
and broke four dock tests that encode the existing arrangement. Those
tests were right and the change was wrong: the earlier commit claimed
to leave the layout alone. BROWSER now docks the panel on first use,
so nobody's edges rearrange on upgrade for a panel they never asked
for.
Fusion Black pairs near-black chrome with a paper-white canvas, so the
drawing is the only bright thing on screen. That breaks the assumption
in theme_canvas_background that the canvas follows the chrome, hence
the explicit lookup: falling through to the palette would paint model
space black and undo the point of the theme.
Both keep a blue accent rather than going fully greyscale. Selection
highlight defaults to the theme primary, and a white primary would be
invisible against a white canvas.
These are Theme::Custom values and so are absent from iced's
Theme::ALL. all_themes() is the list to enumerate from now; the picker
in the options dialog uses it, and parse_theme_name resolves both by
name.
Comments and the Options help text describe the behaviour of commercial
solutions without naming any product. The command menu puts the command's
keywords directly under Enter / Cancel, with Recent Input and Snap
Overrides below them, so the choices that change from step to step are the
closest to the pointer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).
Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.
LINE gains options() (Close/Undo/eXit).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
value toggle, and redesigned constraint-ribbon icons
Properties panel:
- New "Parameters" section (shown with no selection) listing every named
parameter with inline name/formula editing, add, and delete, backed by
new PropValue::ParamRow/ParamAddRow and command_driver handlers
(resolve_named_parameter_edit, on_prop_param_commit/_delete/_add_new).
A fresh parameter's formula now defaults to "1", not "0" — a 0-length
seed value is a genuine solver singularity for a Distance constraint
driven by that parameter, with no defined direction to grow back out of.
- New "Constraints" section (shown for a single selected entity) listing
every constraint touching it as a clickable PropValue::EntityLink that
selects the linked entities in the viewport, danger-tinted when the
constraint conflicts.
Constraint pills:
- New Options > General toggle, "Show values and parameter names on
constraint markers" (on by default, persisted). Off, every pill shows
just its bare glyph instead of glyph+driven-value/parameter-name — the
glyph alone is enough to see a constraint is present, without the value
text covering nearby geometry on a dense sketch.
Constraint-ribbon icons:
- Replaced all 18 unicode/letter glyph icons (including the plain "F",
"L", "M", "S" letters) with proper SVGs under assets/icons/constrain/,
matching the Modify section's two-color style (#B4B6B9 white / #6DB7ED
blue, consistent stroke width). Tangent reuses the Draw section's
white-arc-plus-blue-dots motif.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The application has no support-file search path — the four folders it uses
are functions returning fixed paths, not settings. Rather than build a Files
page that pretends otherwise, this one answers the question people actually
open it to ask: where does this thing keep my plot styles. Each row shows the
location and opens it in the file manager, and a row whose path the platform
could not give says so with its button disabled.
General gains buttons through to the plugin manager, the keyboard shortcut
editor and the alias editor. Those three have good dialogs of their own and
are not absorbed; Options simply stops being a place you cannot reach them
from.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The ViewCube, the UCS icon, its at-origin placement and selection cycling all
have commands and status-bar pills, and all four kept their value only on the
app struct. Turn the ViewCube off with NAVVCUBE, restart, and it is back.
Nothing failed — the setting evaporated — so a checkbox for any of them would
have been a checkbox that forgets. They are persisted first, with a
round-trip test, and only then given controls.
The new 3D Modeling page carries the three view tools plus the drawing
variables that decide how solids are tessellated: ISOLINES, DISPSILH, SURFU,
SURFV, SURFTYPE, SOLIDHIST and SHOWHIST. Those are saved in the DWG rather
than in preferences, so the page says so beside each group and hides them
entirely when no drawing is open.
Changing them also rebuilds the geometry. The SETVAR path never did, which is
why the comment beside LTSCALE's invalidation exists — the same reasoning
applies here, and without it a new isoline count does not appear until some
unrelated edit rebuilds the solid.
Selection cycling joins the Selection page next to the other two selection
modes, since that is what it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two drafting preferences had no proper home. The Drafting Settings dialog
displays the drafting rotation and offers only a Reset button — there was no
way to type an angle short of `SETVAR SNAPANG`. The polar tracking increment
existed in exactly one place: a pop-up hanging off the status-bar pill.
The rotation is a text field over an edit buffer rather than the value
itself, so clearing it to retype does not snap the crosshair to zero on the
way through; the buffer is reseeded whenever the value is restored from
behind it. Angles render without a trailing `.0`, matching how the polar
pop-up has always shown them — same kind of number, same reader.
Snap modes, grid spacing and object snap stay in Drafting Settings, where
they belong; the page links to it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Zoom direction and factor, whether TEXTEDIT ends after one object, whether
continued dimensions inherit the base dimension's style, which points QDIM
measures from, and which annotative objects pick up a newly set scale. All
six work today; none had a control.
Two of them needed their meaning worked out rather than copied.
ANNOAUTOSCALE stores the mode in the magnitude and on/off in the sign, and
the four modes are not documented anywhere in the app — the command prompt
just says `[-4..4]`. Reading `add_annotation_scale_to_objects` gives them:
1 skips layers that are off, frozen, locked or frozen in the viewport, 2
keeps the locked ones, 3 skips only locked, 4 takes everything. The dropdown
names them instead of showing bare numbers, and choosing Off negates rather
than zeroing, so the mode survives being switched off and back on — which is
the convention the status-bar pill already follows.
The QDIM origin priority had no system variable at all; it could only be
reached through a keyword inside the running command.
Drawing units stay in their own dialog; this page links to it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three settings that work, persist, and could only be reached by typing their
name: TEXTFILL, CLIPROMPTLINES and COMMANDLINEFADETIME. The last two govern
how much of the command window is prompt and how long its history lingers —
the kind of thing people fiddle with once and then leave, which is exactly
what a settings dialog is for.
One fix rides along. TEXTFILL is a process-global, so changing it invalidates
the text in every open drawing; the SETVAR path rebuilt only the active tab,
leaving the others rendering the previous setting until an unrelated edit
happened to rebuild them. Both paths now go through
`invalidate_text_everywhere`, so the checkbox and the command cannot disagree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
General had become three unrelated controls: a language picker, a save format
and a file association. The last two move to an Open and Save page, where
they join the two saving preferences that have never had a widget.
Automatic save has worked since the SAVETIME command was added and is
persisted; the only way to change the interval was to type it. Same for the
`.bak` copy from #205 and its ISAVEBAK command. Both are settings people
expect to find in a dialog, and neither was in one.
The page also carries a button through to the Plot dialog. Options holds the
preferences; the plot device, paper and plot styles stay where they already
work well. Note that the modal stack shows one dialog at a time, so the
button replaces Options rather than stacking on it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The dialog laid its pages out as a row of buttons across the top, which is
what AutoCAD does and what fits while there are four of them. The pages this
series adds take it to nine, and the names are translated into 21 languages —
a row of nine German or Russian page names does not fit at any dialog width
worth having.
The rail is now a vertical list down the left, the dialog is 880×620 rather
than 540×560, and the content pane scrolls on its own.
Which page was open is now remembered. With four pages, reopening on General
was a shrug; with nine it means hunting for the one you were last in.
The ribbon's Options tool has existed all along — `ToolDef`, icon and all —
but was marked `#[allow(dead_code)]` and never added to a group, so the
dialog could only be reached by typing OPTIONS or from the start page. It
now sits in Manage ▸ Application, beside About.
No settings change in this commit; it is only the shell the rest needs.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Brings in 54 commits from origin/main: a selection-performance overhaul,
surface thickening, GPU-native wide/tapered stroke rendering, continued
ocs_doc_api evolution, and assorted fixes/polish (block double-click
editing, DWG hatch/database repair, clipboard, collapsible Properties
sections).
Six real conflicts, all where this branch had independently re-applied
a fix upstream later revised or already carried natively:
- src/app/automation.rs, src/app/command_driver.rs: combined both
sides — kept this branch's sketch-constraint/named-parameter loading
on "new"/"open", adopted main's Scene::clear()/material_base_dir and
its newer rebuild_derived_caches() over the older bump_geometry().
Scene::clear() (src/scene/entity.rs) now also resets
sketch_constraints/named_parameters, so every caller gets this for
free instead of each call site repeating it.
- src/io/mod.rs, src/scene/render_graph.rs: adopted main's design
outright (commit 973af87d, authored by Hakan directly) — a large
MINSERT is no longer purged as "corrupt" at load, only its rendering
is bounded, preserving the source data. This branch's own earlier
design (reject at load) predates that revision.
- src/scene/pipeline/mesh_gpu.rs: adopted main's valid_rgba_size()
guard (a real robustness improvement over this branch's version).
- src/snap.rs: replaced wholesale with main's version — this branch's
copy was an explicit verbatim snapshot from an earlier upstream PR
(commit 4c264b8c) with zero constraint-system-specific content, and
main has since evolved it considerably further.
Also removed two now-dead duplicates the merge surfaced without a
conflict marker (both branches had independently fixed the same
things): the OPTIONS/OP command dispatch/autocomplete entries, and
automation.rs's open_finalizes_and_purges_like_the_ui_open_path test
(kept main's version, which covers strictly more: solid_models/
material_base_dir reset on "new").
Full workspace suite passes (812 lib tests + this branch's own 24
constraint/persistence integration tests) except the one pre-existing,
unrelated font-test failure already present on main. Zero clippy
findings in the hand-written merge resolution itself; the ~1,171
warnings clippy reports are pre-existing in the 54 absorbed commits,
not introduced here.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New ConstraintKind variants — Concentric, CenterPoint, Colinear, Midpoint,
Fixed, PointOnCurve, EqualDistance, Symmetric — each built entirely from
existing ocs_gcs (FreeCAD planegcs) primitives, no new solver math needed.
build_constraint now returns Vec<Rc<dyn Constraint>> instead of
Option<Rc<...>>, generalizing the old Coincident-only "needs a second
system-level constraint" special case to every kind that needs one.
Wired into the ribbon (7 new buttons), a new point+pre-selected-entity
command for CenterPoint/Midpoint/PointOnCurve, a new 4-point command for
EqualDistance, and the existing DWG-native class-name mapping (all 8 reuse
the same generic "plain Geometrical node" path already built for
Coincident/Horizontal/etc.). Deliberately not modeled: Normal and
EqualCurvature, which for this app's Line/Circle-only entity model would
just be Perpendicular and Equal wearing different DWG class names.
Also makes DWG-native constraint persistence opt-in (Options > General,
off by default) rather than unconditional: a scope that doesn't yet have
the native graph is only given one when the setting is on, but a scope
that already has one — from an earlier save, or a file that came from
real AutoCAD — keeps getting it resynced regardless of the setting, so
toggling it off never freezes a stale graph in place.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Named parameters (docs/named_parameters_design.md, stages 3-4):
- ParameterTable (src/scene/named_parameters.rs): a document-wide table of
named formulas, each resolved through a shared expression evaluator with
cross-parameter references, cycle detection, and division-by-zero/parse
error reporting. SketchConstraint::driving_param becomes DrivingValue
(Literal | Named) instead of a bare f64, resolved at solve time by
sketch_solve::build_constraint via Scene::named_parameters.
- Persistence (src/scene/named_parameters_persist.rs): same lazy XRecord
model sketch_persist.rs already established, synced around open/save.
Bumps the sketch-constraint XRecord's own format version (1 -> 2) since
DrivingValue's shape doesn't line up with a version-1 blob's bytes.
- PARAMETERS command and its editor (src/ui/window/named_parameters.rs):
add/remove/edit rows, live validation, duplicate-name detection: Apply
defines the table and re-solves every constraint scope with a
named-parameter-driven constraint (command_driver.rs). Distance/Angle
constraint prompts (modules/draw/constrain/value.rs) now accept either a
literal or an existing parameter's name, mirroring how the constraint's
own value prompt already worked.
- Undo scope-down carried over from this project's own established pattern
(constraint-system stage 9): the geometry an Apply moves is one undo
step, but the parameter table edit itself has no undo entry yet — a
documented follow-up, not a silent gap.
UI scale setting (src/app/settings.rs, app/mod.rs, ui/window/options.rs):
a whole-interface scale percentage (50-200%), wired directly into iced's
own per-window scale_factor hook rather than per-panel font-size
plumbing, so it applies immediately to every panel, dialog, and the
ribbon at once. Persisted alongside the existing lineweight-display-scale
setting.
OPTIONS/OP command dispatch (app/commands/view.rs, app/commands/mod.rs):
OPTIONS was registered for autocomplete but had no dispatch arm — the
Start-tab welcome screen's own button was the only way to reach it.
Found live-testing the UI-scale setting, unrelated to that feature
itself. "OP" is AutoCAD's own short alias.
help/: a new self-contained static user-help manual (manual.md as the
authored source, tools/build_help.py splits it into the committed static
HTML pages plus search index) — not yet wired into the application.
64 new/updated tests across the named-parameters and constraint-prompt
changes.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Resolve curve intersections through cadkernel, retain empty exact results, gather analytic candidates independently of tessellation, and bound material uploads. Preserve large MINSERT data while limiting rendering work; remove obsolete review narratives.
Ports FreeCAD's planegcs 2D geometric constraint solver to Rust as a new
crates/ocs_gcs workspace member, and wires it into the document/scene model
as a persistent SketchConstraintSet: Coincident, Horizontal/Vertical,
Parallel/Perpendicular, Equal, Tangent, Distance, Angle and Radius
constraints that re-solve live (including mid-drag, not just on release),
render glyphs and a DOF badge, flag conflicts with a one-click resolver
pill, and round-trip through save/load via an XRecord blob.
Also includes docs/command_reference.md (a statically generated reference
of every registered command and its prompt sequence) and
docs/named_parameters_design.md + docs/backlog.md, which hand off the next
queued feature (a named-parameter/expression table) and consolidate every
deliberate scope-down and open gap found along the way, so a fresh session
has a complete starting point.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude