Constraint delete: a Properties-panel row delete button, viewport
click-to-select on a constraint glyph pill with Delete-key support, and a
right-click "Delete Constraint" menu item — all routed through one
undoable Scene::selected_constraint-aware path.
Fixes two named-parameter bugs found while testing that feature:
- DIMCONSTRAINT: a parameter named like a mode-switch keyword ("r", "d",
"a", "x", "y") could never be referenced, since the keyword check ran
before the parameter-name check.
- PARAMETERS modal Apply rebuilt Scene::named_parameters but never
refreshed the Properties panel, leaving renamed/deleted rows stale
until an unrelated refresh (e.g. a selection change) happened to occur.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
value toggle, and redesigned constraint-ribbon icons
Properties panel:
- New "Parameters" section (shown with no selection) listing every named
parameter with inline name/formula editing, add, and delete, backed by
new PropValue::ParamRow/ParamAddRow and command_driver handlers
(resolve_named_parameter_edit, on_prop_param_commit/_delete/_add_new).
A fresh parameter's formula now defaults to "1", not "0" — a 0-length
seed value is a genuine solver singularity for a Distance constraint
driven by that parameter, with no defined direction to grow back out of.
- New "Constraints" section (shown for a single selected entity) listing
every constraint touching it as a clickable PropValue::EntityLink that
selects the linked entities in the viewport, danger-tinted when the
constraint conflicts.
Constraint pills:
- New Options > General toggle, "Show values and parameter names on
constraint markers" (on by default, persisted). Off, every pill shows
just its bare glyph instead of glyph+driven-value/parameter-name — the
glyph alone is enough to see a constraint is present, without the value
text covering nearby geometry on a dense sketch.
Constraint-ribbon icons:
- Replaced all 18 unicode/letter glyph icons (including the plain "F",
"L", "M", "S" letters) with proper SVGs under assets/icons/constrain/,
matching the Modify section's two-color style (#B4B6B9 white / #6DB7ED
blue, consistent stroke width). Tangent reuses the Draw section's
white-arc-plus-blue-dots motif.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The ViewCube, the UCS icon, its at-origin placement and selection cycling all
have commands and status-bar pills, and all four kept their value only on the
app struct. Turn the ViewCube off with NAVVCUBE, restart, and it is back.
Nothing failed — the setting evaporated — so a checkbox for any of them would
have been a checkbox that forgets. They are persisted first, with a
round-trip test, and only then given controls.
The new 3D Modeling page carries the three view tools plus the drawing
variables that decide how solids are tessellated: ISOLINES, DISPSILH, SURFU,
SURFV, SURFTYPE, SOLIDHIST and SHOWHIST. Those are saved in the DWG rather
than in preferences, so the page says so beside each group and hides them
entirely when no drawing is open.
Changing them also rebuilds the geometry. The SETVAR path never did, which is
why the comment beside LTSCALE's invalidation exists — the same reasoning
applies here, and without it a new isoline count does not appear until some
unrelated edit rebuilds the solid.
Selection cycling joins the Selection page next to the other two selection
modes, since that is what it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Resolve curve intersections through cadkernel, retain empty exact results, gather analytic candidates independently of tessellation, and bound material uploads. Preserve large MINSERT data while limiting rendering work; remove obsolete review narratives.
Rebuilding the properties panel for a 186 468-entity selection took ~112 ms,
and four things in it scaled with the selection for no reason.
The panel filtered the selection down to the active group with
`group.handles.contains(handle)`, a linear scan of a `Vec`, once per selected
entity. The default group is "All", which holds every selected handle, so
both factors are the whole selection: 186 468 squared. Hashing the group once
makes it linear. The measured cost never showed this — 55 ms at 1 993
entities against 112 ms at 186 468 is not a quadratic curve — but the scan is
still wrong, and it is the shape of thing that turns a large selection into
an unresponsive window.
`entity_in_working_plane` clones the entity before it checks whether the
plane is the identity, so with no UCS in play the panel deep-cloned every
selected entity to get back what it was handed. It now borrows, and clones
only where a transform is applied.
`aggregate_sections` built every entity's property list, collected them all,
then folded them together and read each exactly once. A property list is
sections of labels and formatted values, every one an allocation, so a
whole-drawing selection held 186 468 of them in memory at the same time. It
now builds one, folds it, and drops it, and stops once nothing is left in
common. The fold order is unchanged, so the result is too.
The ribbon sync cloned each entity's linetype into a `String` only to compare
it, and kept walking after every field had been found mixed. Once all four
are mixed nothing further can change, so it stops there.
`aggregate_sections` and `merge_sections` had no tests, so the fold that
drives the whole multi-selection panel was resting on the compiler. Two now
cover it: a field the entities agree on keeps its value, one they differ on
reads as varying, and a single entity folds to its own rows.
`properties-detail` and `properties-panel` report the phases, which is how
the panel arm was ruled out as the remaining cost — it does not reach its
5 ms floor at 186 468 entities.
Selecting a whole drawing was unusable on a 186 468-entity file. Four costs
scaled with the selection where they did not have to.
Every selected handle triggered a walk of the entire document to find LEADERs
pointing at it. On the file this came from, selecting 471 583 entities in a
585 786-entity drawing did not finish inside eight minutes. A reverse index
built once per geometry epoch answers the same question; a test asserts it
returns exactly what the walk returned, including the case of two leaders on
one annotation.
Group expansion asked the selection about every group: for each selected
handle it scanned each group's own member list. Asking each group once
whether it holds anything selected turns that around.
Selecting and deselecting went one entity at a time, and `deselect_entity`
rebuilt the ordered list with a `retain` per handle, so removing N of M
walked the order list N times. Both now take a slice.
Grips were built for every selected entity. AutoCAD stops at GRIPOBJLIMIT,
and the DWG header does not carry the variable, so its default of 100 stands
in for it.
The remaining two commits are measurement: `select-commit` reports the phases
of a selection separately, which is what showed the bulk paths had been added
to the press-drag branch while a click-move-click window goes through a
different one entirely.
Reuse the application library from the binary entry point instead of compiling the module tree twice. Keep desktop-only transports and caches out of web builds, remove unused test code, and check executable targets in CI.
