build_geos only turned Line/Arc/Circle/Ray/XLine/Ellipse/Spline into
cutting-edge geometry, so a polyline contributed no boundary and a line
could not be trimmed (or extended) against it — even though trimming the
polyline itself against lines already worked. Explode each polyline
(LwPolyline / Polyline / Polyline2D / Polyline3D) into its Line + Arc
segments and add them as boundaries, tagged with the polyline's handle so
the click-target self-exclusion still holds. Factored the per-entity Geo
build into geo_from_entity and exposed explode_polyline_segments.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TRIM had no LwPolyline arm in its pick dispatch, so clicking a polyline
segment did nothing (only EXTEND handled polylines). Add trim_lwpolyline:
parameterise the polyline by segment+u, find boundary crossings per
segment, and remove the span containing the click between the adjacent
cuts. A closed polyline needs >=2 cuts and yields the surviving open
arc; an open one yields the surviving piece(s). Fully-surviving segment
bulges are kept; the partial ends become straight. Hover now previews
the trim too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Removes storm_sewer module and stormsewer crate so this branch is suitable for upstream PR. Plugin host, docs, and CadCommand acquisition hooks remain.
Text-input steps (OFFSET distance, POLYGON sides, radii, counts) were
swallowed by the dynamic-input overlay: typed digits landed in the field
buffer and Enter committed a point pick, so the value never reached
on_text_input (issue #61). Now each text step shows one scalar box whose
value routes to on_text_input on commit; non-numeric prompts (names,
keywords) keep going to the command line so mixed text like "Bolt12"
isn't split.
OFFSET reworked: object first, then through-mode by default — the offset
follows the cursor at the perpendicular distance to the object. Typing a
number locks the magnitude (cursor then only picks the side); a value
typed and clicked without Enter is applied before the point pick.
The dynamic-input overlay and the command line now show the active
step's prompt and hold it until the step completes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reports showed structure placement could stall if command-line text entry
didn't register (ribbon-invoked commands, dynamic-input/focus interactions).
Make a canvas click ALWAYS place a structure, using whatever values were typed
so far (defaults for the rest) — so dropping an inlet works regardless of typed
entry. If typing works, enter invert/rim/area/C first, then click to place with
those values. Pipes are pick-first: click START then END structure; the pipe
commits on the second click with the current diameter/n.
Drop the early focus_cmd_input() return in the dispatch arms (the normal
dispatch tail already focuses the command line and records last_cmd).
15 module tests green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The structure/pipe commands took a viewport interaction first and then asked
for typed values. But a point-pick result (NeedPoint) does not re-focus the
command line, so after the click the typed digits went nowhere and Enter hit
on_enter -> Cancel ("Command cancelled.").
Reorder both commands to the OFFSET-style flow: collect typed values first
(command line focused at dispatch and kept focused through text input), then
take the viewport click last and commit from it.
- PlaceStructure: enter invert/rim/area/C, then click the location.
- PlacePipe: enter diameter/n, then click START and END structures; commit
from the second pick using the click points (connectivity stays exact via
structure handles).
- Dispatch arms focus the command line so the first prompt is typeable.
- Reverts the update.rs inject_picked_entity allow-list change (the pt-based
pipe no longer needs the picked entity).
15 module tests updated and green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replaces the .ssn-file workflow with an interactive one driven by the canvas:
- Structures (SS_INLET / SS_JUNCTION / SS_OUTFALL) prompt invert/rim/area/C on
the command line and commit a CIRCLE tagged with STORMSEWER_STRUCT XDATA
[kind, invert, rim, area, C]. Outfalls skip area/C.
- SS_PIPE picks a START and END structure (entity-pick), snapping its endpoints
to their centers, prompts diameter/n, and stores connectivity (the two
structure handles) in STORMSEWER_PIPE XDATA [diameter, n, from, to].
- SS_ANALYZE / SS_REPORT / SS_PROFILE rebuild the network from the drawn
entities (data.rs::network_from_entities) and analyze it directly; SS_ANALYZE
overlays flow/HGL labels without redrawing the geometry.
Because the data lives on the entities as XDATA, the network round-trips to
DWG/DXF. One additive line in src/app/update.rs adds SS_PIPE to the
inject_picked_entity allow-list so the command can read the picked structure's
center for snapping.
15 module tests cover the XDATA round-trip, analyze-from-drawing, and the
command step machines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds a "Storm Sewer" ribbon tab backed by a new in-repo `stormsewer` engine
crate (vendored under crates/). The engine implements standard public-domain
methods — Rational-method peak-flow accumulation, Manning circular-pipe
hydraulics, time-of-concentration / IDF intensity, and an HGL backwater pass
with junction losses — with 24 unit tests and no external dependencies.
Module (src/modules/storm_sewer/):
- Drafting: SS_INLET / SS_JUNCTION / SS_OUTFALL place structure markers and
SS_PIPE chains pipe runs (interactive CadCommands).
- Analysis: SS_ANALYZE / SS_REPORT / SS_PROFILE open a .ssn network file, run
the engine, draw the plan and HGL long-section, and print a report.
- SVG icons; SS_* commands registered for command-line autocomplete.
Integration is additive: build.rs auto-discovers the module and one dispatch
block is added to src/app/commands.rs. 7 module integration tests.
See src/modules/storm_sewer/INTEGRATION.md for the design and the optional
follow-up (drive analysis from canvas geometry via XDATA).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Phase 1.1: resolve_xrefs now purges corrupt entities inline as it
merges each xref and returns the dropped count, removing the second
full-document purge_corrupt_entities walk in the FileOpened handler.
Every xref-bearing open saves one O(N) entities() pass.
Phase 2.4: split compute_world_offset into offset_prep / offset_centroid
/ world_offset_from_centers; centroid accumulation now rides the existing
cache-handle walk in build_derived_caches. Two O(N) entity walks collapse
into one, with identical MSPACE-membership filtering preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three polyline issues in the FILLET/CHAMFER commands:
- The polyline preview wire ignored bulge, so a filleted corner previewed
as a straight line instead of the arc. lwpoly_pts now tessellates bulge
segments via BulgeArc (same as the entity render).
- Hovering a polyline edge didn't highlight it: the first-pick hover only
handled Line/Arc. Both commands now highlight the nearest polyline
segment on hover.
- CHAMFER didn't work on polylines at all (Line-only). Added a SecondPoly
step + chamfer_lwpoly_corner: pick two adjacent segments of one polyline
to cut the shared corner back by the two distances with a straight edge.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The trim/extend preview wire for an LwPolyline placed each vertex at
[x, elevation, y] (the old Y-up swap), so the highlighted boundary was
drawn in the wrong plane. Use [x, y, elevation] to match the entity
render and the rest of the now-XY commands.
(The remaining axis swaps live in the 3D revolve / truck B-rep pipeline,
which is a separate, internally-consistent Y-up subsystem.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The drawing plane is world XY, but break, join, rectangular array, the
stretch/window move, the spline preview wire and several doc comments
still used the stale "Y-up XZ" mapping (world Z = DXF Y). That made
those commands operate against a constant-elevation axis: arc/circle/
line/spline break and join picked the wrong points, rectangular array
stepped rows along the Z (elevation) axis, window-stretch tested the
wrong window bound, and the spline wire drew in the wrong plane.
Map every drawing-plane coordinate through .y (elevation on .z),
matching the entity builders, the inquiry commands and the central
transform. Stale Y-up comments updated to avoid future confusion.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
These commands still read the cursor / entity coordinate with the old
"Y-up XZ" assumption (world Z = DXF Y), which is wrong now that the
drawing plane is world XY: ID/DIST/AREA reported swapped Y↔Z values and
zero-area, and fillet/align/lengthen picked against a constant-elevation
axis. Read the drawing-plane coordinate from .y (elevation stays on .z),
matching the central transform and the entity builders.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The pick/typed point is the world XY plane (z = elevation = 0), but
several entity builders still mapped the screen point as if the world
were Y-up (drawing in XZ), reading the constant elevation as the DXF Y.
That collapsed shapes onto a single line — e.g. a revision cloud always
came out as two horizontal lines regardless of the path drawn.
Map the drawing-plane point straight through (x→x, y→y, z→elevation) in:
revcloud, donut, mline, raster image, wipeout (polygonal + rectangular),
table, attribute definition, and tolerance. Previews already used the
correct pass-through, so they matched the cursor; only the committed
geometry was wrong.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworks MLEADER text/leader geometry and grip editing, and aligns LEADER
to MLEADER's conventions (kept as separate entities).
Text & landing (render path):
- Text is side-anchored on the leader-facing edge and reads outward; the
side, alignment and the horizontal landing are recomputed every frame
from the text grip's position relative to the leader, so moving the
arrow or the text re-mirrors the whole layout and the landing stays
attached to the text's near edge.
- Fixes#49: text was centred on the leader endpoint regardless of side.
Grips:
- Text-location grip plus an MTEXT-style triangle wrap-width grip at the
box's far edge; dragging it sets the MText wrap width.
- Multifunction grip menu restored and made functional: leader-line
vertices offer Add Leader / Remove Leader (Add grabs the new arrow so it
follows the cursor — click places, Esc removes it); the text grip offers
Move Independent (text only) and Move with Leader (translates the whole
multileader via a move-all sentinel grip).
Arrows:
- LEADER and MLEADER arrowheads now render at the same size (text height),
matching previews.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the Home tab to "Draw" and add a Model tab beside it with two
groups:
- Model: BOX / CYLINDER / CONE / SPHERE / WEDGE / TORUS, placed with a
footprint + height. Each is built as a real ACIS Solid3D (acadrust
primitive builders) plus a truck B-rep, tessellated into the shaded
mesh pipeline, with edge wires for picking + wireframe.
- Design: UNION / SUBTRACT / INTERSECT via truck-shapeops.
A session-only Scene.model_solids cache holds each solid's truck B-rep
so the boolean tools can combine and chain them. Supersedes the old
command-line BOX/SPHERE/CYLINDER (insert::solid3d_cmds keeps EXTRUDE/
REVOLVE/SWEEP/LOFT).
Known limitations: booleans need solids created this session; curved
ACIS primitives render in-session but not after reload (the SAT
tessellator handles only planar caps); geometry assumes world_offset 0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Route every text-bearing entity to an in-place editor instead of the
command line: a plain text box for single-line text (Text, attributes,
dimension override, tolerance) and the rich MText editor for MText /
MultiLeader. A Leader resolves to the entity it annotates.
- TEXT places a plain text box at the click; double-click edits in place.
- DDEDIT and double-click on any text entity open the matching editor.
- MLEADER places the leader then opens the MText editor on its content.
- LEADER follows the classic flow: points, Enter, then a linked empty
MText annotation opens in the editor; the leader's annotation_handle
links the pair so they edit/erase as a unit.
Adds shared field read/write helpers and a begin_text_edit router, plus
CommitAndEditText / CommitManyAndEditText results that commit an entity
and open its editor (commit_entity now returns the new handle).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Added SVG icons for text formatting options (bold, italic, underline, overline, strike, uppercase, lowercase).
- Introduced a new `MTextEditorState` struct to manage the state of the MText editor.
- Implemented functionality to open the MText editor from the command line and edit existing MText entities.
- Added message handling for various MText editor actions (formatting, height, style, font, justification, alignment, line spacing).
- Created a dedicated preview area for MText rendering within the editor.
- Updated the command structure to support opening the MText editor and handling text input.
- Refactored existing MText command logic to integrate with the new editor.
DRAWORDER now affects rendering immediately (bump geometry epoch so the
sort cache rebuilds) and front/back anchor to the block's full effective
sort range instead of only existing table entries, so bring-to-front
actually lands on top. The render fallback sorts table-absent entities by
their own handle.
Draw order now applies across entity types, not just within a type. A
per-entity draw-order rank (SortEntitiesTable override or own handle,
ranked per block) is encoded as a small signed clip-z bias in the wire,
hatch, image, and 3DFACE pipelines. The shared LessEqual depth buffer then
orders fills, lines, rasters and 2D solids against each other regardless of
pass order — without touching model coordinates. 3D meshes keep real
geometric depth; wipeouts stay always-on-top.
Adds a Draw Order submenu to the viewport context menu (Bring to Front,
Send to Back, Bring Above/Send Under Object). The above/under items run an
interactive reference-object pick, then reorder the captured selection.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Sağ kenardaki dikey orbit/pan/zoom/zoom-extents araç çubuğu tümüyle
kaldırıldı: viewport render'ı, overlay::nav_toolbar fonksiyonu,
show_navbar state + ToggleNavbar mesajı/handler'ı, NAVBAR komutu, View
şeridindeki "Navigation Bar" aracı ve navbar modülü/ikonu. Aynı
gezinme işlemleri komutlar (3DORBIT, PAN, ZOOM*) ve ViewCube üzerinden
erişilebilir durumda.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
DYN overlay artık ekran-yukarı için world Y'yi (w.y) gösteriyor; eskiden
w.z kullanıldığı için Z-up sahnede top/3D görünümde Y hep 0 görünüyordu
(#27).
Ayrıca overlay etiketi aktif komutun o anki sorusuna göre biçimleniyor:
yeni DynField (Point / Distance / Angle) trait metodu eklendi. CIRCLE
yarıçap adımında 'd=...', ROTATE açı adımında '<...°', diğer nokta
adımlarında koordinat / polar (d + açı) gösteriliyor.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Two behaviour changes that bring the command line in line with
established CAD workflow:
1. **Always-on keyboard capture.** The input was blurred whenever no
command was running, so typed letters went nowhere until the user
clicked into the field. Replace the blur with a re-focus on every
command lifecycle transition (cmd_result.rs) and on viewport / tab
/ ribbon clicks (update.rs), focus the input at startup, and add
a global key subscription that catches any unhandled character key
or backspace and routes it into the buffer via two new messages
(CommandAppendChar / CommandBackspace) — so the command line keeps
accumulating keystrokes even if focus parks somewhere not
focusable. Removes the unused blur_cmd_input helper.
2. **Space submits.** Typing a space at the end of the input now
submits the buffer the same way Enter does. Only exception: an
active command that's currently collecting free-form prose
(TEXT / MTEXT / DDEDIT body, ATTDEF prompt / default value,
INSERT attribute value, ATTEDIT cell). Those advertise the new
`CadCommand::wants_text_with_spaces()` flag so the Space character
reaches the buffer as a literal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The same DXF/DWG bulge → (center, radius, sweep) formula was inlined
in six places (hatch outline, polyline tess + truck path, lwpolyline
×4, scene hatch fill, explode bulge_to_arc) — each with subtly
different sweep-direction handling for the bulge sign.
Add `entities::common::BulgeArc { center, radius, start_angle,
end_angle, sweep }` with one `from_bulge(p0, p1, bulge)` constructor
and a `sample(t)` helper. Callsites collapse to a few lines.
Net: -121 lines, one canonical sweep-direction convention shared by
all consumers.
array.rs (the path-along-curve f32 helper) keeps its inline math —
its sign convention is inverted relative to the others and changing
it without exercising the array-path command risks regressing the
output.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Joining the OpenAEC Foundation (open-aec.com). Crate/struct become
OpenCADStudio, user-facing strings use the spaced "Open CAD Studio"
form, repo URLs point to HakanSeven12/open-cad-studio. Logo (window
icon + assets/logo.svg) redrawn with OCS initials. Drop examples/
binaries — unused.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
A pinned "Start" tab now lives at index 0. It cannot be closed, opens
on launch, and replaces the model-space viewport with a welcome page —
similar to Thunderbird's first-run screen.
- Boot opens with only the Start tab; Drawing1 is no longer auto-spawned.
- The Properties left panel becomes a Recent Documents rail on the
Start tab. Recents persist to disk
(%APPDATA%/H7CAD/recent.txt on Windows, $XDG_CONFIG_HOME/H7CAD/recent.txt
on Linux, ~/Library/Application Support/H7CAD/recent.txt on macOS), up
to 20 entries, saved on every open and rehydrated at boot.
Each row opens or removes the file in place.
- The Support ribbon group (Donate / Report / About / Changelog) is
retired; the same actions surface on the welcome page instead. The
Donate button is the primary call-to-action — solid #B03020 brand
fill with a soft brand-tinted ambient glow halo behind the action row
(Thunderbird-style coloured glow against the neutral page).
- Drawing-only overlays (mouse-area, viewcube, navbar, dynamic input,
selection markers) are suppressed on the Start tab so its clicks
don't trigger CAD commands. OpenFile's "current_is_empty" check
refuses to replace the Start tab, and TabClose ignores requests on
it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Tessellation and DIMBASELINE pick up the few DimStyle fields that were
still hard-coded or ignored:
- DIMTMOVE = 1 draws a connector segment from the dim-line anchor to the
saved text_middle_point when the text has been moved
- Leader arrows are resolved via the leader's DIMSTYLE → DIMLDRBLK; the
shape (closed-filled / open / dot / tick / …) is drawn through the same
arrow emitter the dim path uses, including fill_tris for filled blocks
- DIMBASELINE picks up DIMDLI from the active DimStyle instead of the
hard-coded 1.5 increment
- DIMTOFL / DIMTIX / DIMATFIT / DIMUPT / DIMTXTDIRECTION are read so the
fields round-trip on save; their effect is at dim creation, not render,
so they're acknowledged with a no-op block
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Two precision problems were producing visibly wrong hatches on UTM-scale
(and similarly-offset) drawings even after world_offset was correct:
1. **Boundary tessellation** — `hatch_model_from_dxf`'s polyline-bulge
arc tessellation ran the whole arc-center computation in f32. With
vertices at WCS magnitude ~1e5 the f32 ULP is ~1 cm, which propagated
into the sampled arc points and showed up as visibly wavy / jagged
hatch boundaries on edges that crossed the long axis of the drawing.
Re-run the full bulge → arc math in f64; only cast at the to_xy
call that feeds the (also f64) boundary buffer.
2. **Pattern phase** — the per-fragment `perp / perp_step` modulo blew
precision when `xz` was at offset-rel WCS magnitude and perp_step
was sub-cm. Move the precision-critical bits out of f32 by keeping
each hatch's anchor in f64 on the model side: `HatchModel` now
carries a `world_origin: [f64; 2]` and the `boundary: [f32; 2]`
vertices are stored as small offsets from it. The GPU vertex shader
adds `origin` back inside the view_proj multiply for clip position
(sub-pixel-lossy at large hatches but invisible); the `xz` varying
that the fragment shader uses for in_polygon + pattern math stays
in hatch-local space at full f32 precision.
For pattern alignment across adjacent hatches with the same family,
the GPU pipeline snaps the anchor to the family's perp/along grid
in f64 before sending it down. Snap uses the same QCAD-PAT
convention (`fam.dy = perp_step`, `fam.dx = along_step`) the
shader's check_family uses — an earlier attempt used the world-frame
`(-dx*sin + dy*cos)` formula, which produced a meaningless grid and
no alignment.
Trade-off: pattern phase is "global modulo per-family-grid" rather
than tied to WCS (0,0). Same hatches still align with each other;
the absolute phase relative to the WCS origin may differ from the
pre-fix behaviour on small drawings.
Consumers that read `model.boundary` directly (hit_test, paper_canvas,
add_hatch round-trip) reconstruct WCS via `boundary[i] + world_origin`.
The hatch wgsl bind-group entry for binding 0 was bumped to
`VERTEX | FRAGMENT` because the vertex shader now reads `h.origin`.
The fragment-shader hatch LOD substitute + sub-pixel skip from e7675be
and the scissor plumbing from fbbac42 still work — those touched
different fields of the same struct.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* io/xref.rs — replaced the 7-line "BlockRecord::is_loaded turned out to
be unreliable" rationale with a one-liner. The reverted experiment
lives in git history (e88a946, 0996b75).
* refedit::RefEditSession.insert_handle — set at construction but never
read; the "kept for future REFCLOSE DISCARD" TODO can come back via
git history when that feature lands.
* scene::mod — dropped the placeholder MeshModel re-export; nothing
outside `mesh_model` consumes the bare name and MeshLodSet is the
pipeline-facing type now.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* helpers::wcs_to_ucs — UCS inverse transform with zero call sites.
* scene::Scene::compute_and_set_world_offset — never called; the load
path uses the free function `compute_world_offset` directly.
* tessellate::tessellate_mesh — never called; mesh tessellation goes
through `solid3d_tess`, not the truck Shell/Solid path.
* truck_tess::tess_to_mesh_model — orphaned with tessellate_mesh's
removal.
* MeshModel::WHITE / MeshModel::SELECTED — only used by the removed
tessellate_mesh.
* xattach::Step::FilePath variant — never constructed; XATTACH always
enters through `with_path` after the file picker. Replaced the Step
enum + prefilled_path field with flat `path` / `block_name` fields
and dropped the unreachable text-input flow.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Each item below was gated by #[allow(dead_code)] and has zero callers
across src/ — none of them are part of any public API consumed by
external crates (this is a binary, not a library):
* modules/insert/underlay_frames.rs + edit_aliases.rs — toolbar stubs
whose `tool()` registrars were never wired into the ribbon; the
parent mod.rs inlines its own include_bytes! for the SVGs, so the
files were orphan dead weight.
* ui/snap_popup.rs:snap_marker_color — never called.
* ui/ribbon/mod.rs:last_dropdown_cmd — never called.
* ui/scale_popup.rs:anno_scale_for_label — never called.
* ui/layers.rs:color_name_to_aci — inverse of aci_color_display
with zero call sites.
* linetypes.rs:name_list — never called.
* scene/pipeline/wire_gpu.rs:new_ghost — never called.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Wire pass already uses `WireModel.vp_scissor` to clip viewport-projected
geometry to its paper-space viewport rect; hatch / image / wipeout
passes drew across the whole canvas. When a future paper-space path
projects fills/images into a viewport, they would bleed past the
viewport frame.
Add `vp_scissor: Option<[f32; 4]>` to HatchModel and ImageModel
(mirroring WireModel), forward it through HatchGpu / ImageGpu, and add
per-pass `compute_*_scissors` / `set_scissor_rect` machinery. Factored
the wire-side scissor-projection math into a shared `project_scissor`
helper. Field defaults to None at every constructor site — no producer
sets it yet, so this is plumbing for the paper-viewport fill projection
that Phase 1.4 unblocks without changing current visual output.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Mirrored INSERTs reverse OCS handedness, but acadrust's explode used to
keep the original normal — making CCW-around-normal arcs and ellipses
sweep the wrong way. The fix lives in acadrust 7c711e9, which flips the
new normal when det < 0 and reprojects center/major_axis/angles into the
new OCS. H7CAD's fix_mirrored_arc workaround is no longer needed.
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Subtracts the DXF header extents centroid (world_offset) from all coordinates
in f64 BEFORE casting to f32. This eliminates the ~0.5 m ULP error that occurs
at 4,000,000 m UTM coordinates and caused geometry to disappear on zoom-out.
- Scene: adds world_offset field + compute_and_set_world_offset() method
- tessellate.rs: threads world_offset through all f64→f32 conversions
(legacy_geometry, dimension_geometry, solid_wire_fallback, multileader)
- truck_tess.rs: to_local() helper already in place from prior session
- mod.rs: tessellate_entity() and entity_aabb() apply world_offset
- update.rs: compute_and_set_world_offset() called after doc load
- cmd_result.rs / solid3d_cmds.rs: pass correct offset to truck tessellators
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add `aabb: [f32; 4]` field to WireModel (world-space 2-D bounding box).
In tessellate_entity() set each wire's AABB from e.as_entity().bounding_box()
via new entity_aabb() helper; Insert sub-entities each get their own AABB.
Preview/interim wires and any entity returning a zero-extent default box get
UNBOUNDED_AABB so they are never pre-rejected.
Replace the chord-sphere heuristic in Snapper::wire_in_range() with a proper
AABB vs snap-circle overlap test. The new check is four scalar comparisons and
correctly handles closed curves (circles, arcs) which the chord-sphere approach
had to special-case.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Integrate NAVVCUBE, NAVBAR, PROPERTIES, FILETAB, LAYOUTTAB, TOOLPALETTES
and SHEETSET commands to toggle UI widgets at runtime. Add 15 new SVG icons
for view module tools previously using glyph fallbacks. Restyle all SVG
icons to use the established two-color scheme: #e0e0e0 for passive geometry,
#4cc9f0 for active/accent elements.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- REPORT opens GitHub new-issue page
- ABOUT opens a dialog window with version, OS and arch info + Copy Info button
- CHANGELOG opens GitHub releases page
- Fix Windows build: add windows-sys as target-specific dependency for PRINT command
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Arc rendering now respects the normal vector: when normal.z < 0 the
midpoint is placed on the clockwise side so the curve sweeps the right way
- Removed spurious .to_radians() / .to_degrees() round-trips in arc.rs
(angles are already stored in the unit the trig functions expect)
- apply_grip and apply_transform use consistent angle units
- normalize_insert_entity no longer converts arc angles; the old conversion
was only needed by the now-removed .to_radians() call in to_truck
- Added fix_mirrored_arc: swaps arc start/end angles when the INSERT has a
mirrored scale (x_scale * y_scale < 0) so exploded arcs curve correctly
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Redesign Insert ribbon tab with 6 groups matching screenshot layout:
Reference (Attach/Clip/Adjust large + Underlay Layers/Frames/Snap small),
Point Cloud (Attach), Block (Multi-View Block/Insert large + Create/Edit/Base small),
Attributes (Define/Edit large + Manage/Sync small),
Import (Import/Land XML), Content (Content Browser/Design Center)
- Remove Primitives group and dead box_prim/clear/cylinder/sphere modules
- Fix all compiler warnings with #[allow(dead_code)] on unused-but-intentional items
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
