- ARRAYRECT, ARRAYPOLAR, ARRAYPATH, ARRAY3D and COPY Array reject item
counts above 100,000 (checked as a product of every dimension) and keep
the prompt open. Unbounded counts allocated one transform per item and
aborted on allocation failure. Stored defaults are clamped as well.
- EXPLODE leaves a MINSERT above the same limit intact instead of
materializing every cell.
- Typed lengths and angles reject non-finite values and magnitudes above
1e15; SCALE rejects a non-finite factor.
- Zero-radius FILLET compares candidate intersections with total_cmp and
rejects non-finite results; partial_cmp().unwrap() panicked on NaN.
- SOLID falls back to a minimal kernel tolerance when its corners' extent
overflows, since Tolerance::new panics on infinity.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
DIVIDE and MEASURE did nothing at all on an ELLIPSE or a SPLINE. Their
length function answered `0.0` for both — the `_ => 0.0` arm — and the
command reported the entity type as unsupported. On a polyline they
measured the chords and ignored the bulges, so points landed short of
where they belonged; on an arc or a circle they read the centre as world
coordinates when the entity stores it in its OCS.
All three now walk the entity's own curve, which the kernel measures
properly: closed forms where they exist, and the integral of the speed
where they do not.
A path ARRAY had the same confusion in a different place. It sampled the
path at even *parameters*, which is the same as even distances on a line
and a circle and nothing like it on an ellipse or a spline — copies
bunched up wherever the parameter ran slow. It also now closes properly:
on a closed path the last copy no longer lands on the first.
LENGTHEN measured an ellipse with a hundred and twenty-eight chords and
then bisected on that, and a spline with forty rounds of thirty-two
chords apiece. A chord sum reads short, so "current length" was already
below the true one before any delta was applied. Both now ask the kernel,
which also makes the spline case one evaluation instead of about
thirteen hundred.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The readout learned to write lengths as 5'-6 1/2" and angles as
N 45d0'0" E, but typed input was still a bare parse::<f64>() — a
coordinate could be displayed and not entered. Give the formatters
their inverses.
parse_length takes feet and inches separated by a dash, a space, or
nothing, with the closing quote optional, and whole-plus-fraction in
any of those forms: 5', 60", 5'-9", 5'9-1/2, 9-1/2, 1/2. A leading
minus is a sign; the one inside 5'-9" is a separator, since after feet
there is nothing left to subtract from.
parse_angle reads the mark that says which convention an angle is in —
g for grads, r for radians, d/'/" for degrees-minutes-seconds, compass
letters for a surveyor's bearing — and reads a bare number in whichever
convention the drawing is set to.
ANGBASE and ANGDIR now apply, but only where they mean something. Which
way a thing points is measured from the drawing's zero and runs the way
it says; how wide an arc opens is the same number whatever zero is
counted from. format_direction and parse_direction are the pair for
directions, and the polar readout and polar input both go through them,
so the bearing shown is the bearing accepted. format_angle stays for
sizes, where applying a base angle would corrupt the value.
The command prompts follow the same rule, each classified rather than
swept: OFFSET distance, FILLET radius, CHAMFER distances, ARRAY and
MINSERT spacing, TRACE width, HELIX, and EXTRUDE height read lengths;
the four dimension text-rotation prompts, ARRAY's total angle and
INSERT's rotation read angles. MLINE's scale and INSERT's scale factor
are left alone — a multiplier has no unit to be written in. INSERT read
both through one parse; they are now separate.
The typed variants also take a decimal comma, which a single-value
prompt has no other use for. parse_length itself does not: inside a
coordinate the comma separates the axes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Completes the f64 migration on the CPU data path: the only f32 left now
is the GPU/render/screen layer, which is architecturally required (wgpu
vertex buffers and iced are f32; f64 vertices would double memory).
- EntityTransform::Rotate.angle_rad and Scale.factor are now f64 (the
transform was already applied in f64 around the DVec3 center, so this
only preserves the typed angle/factor). apply_standard_transform and
apply_standard_scale take f64.
- CmdResult::ExtrudeEntity.height and AlignSelected.{angle_rad,scale}
are f64; the EXTRUDE height parses as f64.
- defaults.rs (last-used construction values: circle radius/diameter,
rotate angle, scale factor, offset/fillet/chamfer distance, array
spacing/counts/angle) moved from Cell<f32> to Cell<f64>. Array counts
round-trip through u32 (exact below 2^53).
- Consumers in circle/array/fillet/offset/rotate/scale/align/solid3d and
dimension.rs rotate_point/scale_point follow. `as f32` is kept only
where a value feeds a WireModel rubber-band/ghost (the preview path is
screen-space f32).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Typed values were quantized to the f32 grid before reaching the
entity (e.g. a length of 2000.8 committed as 2000.8020), worsening
with magnitude. The interaction point layer was all glam::Vec3 (f32).
Two-layer fix:
1. Coordinate backbone -> f64. last_point, last_cursor_world,
dyn_anchor, dyn_ref become DVec3; UcsXform transforms, parse_coord,
the ucs helper fns, dyn_resolve_point, the OTRACK typed-distance
paths, command-line coordinate entry and the coordinate readout all
compute in f64. Screen/GPU/alignment stays f32 (snap engine, render
geometry, projection, UCS-icon/viewcube drawing) with casts only at
those boundaries.
2. Per-command committed storage -> DVec3. on_point already received a
DVec3, but many command impls narrowed it back to f32 (let pt =
pt.as_vec3(); Vec<Vec3> fields) and re-widened at build, quantizing
the committed coordinate. Migrated PLINE, SPLINE, MLINE, LENGTHEN,
INSERT, 3D primitives, every dimension/leader/mleader, ray, revcloud,
wipeout, attdef, table, tolerance, array center, mview, plot_window,
plus the QDIM_PLACE handler and qdim_collect_points. Preview,
hit-test and rubber-band paths keep f32 at the boundary.
Hatch manual boundaries are left for a follow-up: HatchModel.boundary
is structurally Arc<Vec<[f32;2]>> and needs a model-level widen.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Commands that construct geometry with implicit axis directions ignored
the UCS, so a rectangle drawn under a rotated UCS came out world-aligned.
Give commands the UCS and build square to it:
- CadCommand::set_ucs(Mat4) (UCS→wire affine, default no-op); the host
pushes the current UCS via App::push_ucs_to_cmd before each point /
preview / text dispatch (DocumentTab::ucs_wire_affine, identity outside
model space). New axis-aligned commands just override set_ucs.
- RECT (two-corner) and RECT_CEN (center) place their derived corners on
the UCS axes (ucs_box_corners / ucs_box_around_center).
- ARRAYRECT row/column offsets run along the UCS axes.
RECT_ROT, POLYGON, and ELLIPSE already take their orientation from picked
points, so they need no change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ARRAY3D/3DARRAY, ATTEDIT/ATE, DDEDIT/ED and WIPEOUT/WO dispatched on literal
matches but had no CommandRegistration entry, so none surfaced in command-line
autocomplete. Add the inventory submit in each command's module, matching the
convention used by the other interactive commands. Audit confirms no remaining
active_cmd dispatch lacks a registration.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Home tab was already titled "Draw"; rename the module to match:
folder modules/home → modules/draw, HomeModule → DrawModule, id "home"
→ "draw". The inner draw/ command folder is kept (modules::draw::draw).
Update build.rs PRIORITY ("home" → "draw") so the tab returns to the
front of the ribbon; registry.rs regenerates accordingly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
