Grid snap locks to SNAPUNIT instead of magnetizing; snapped 3D points keep elevation instead of flattening to z=0. New SnapTypes Vertex/EdgeMidpoint/FaceCenter/Knot/FacePerpendicular/NearestFace with their own F4 master toggle and mode set, tiers, and markers, fully independent of the 2D master. Solid B-rep corners/edge-midpoints/face-centers from mesh edges and kernel faces, spline knot points, and live perpendicular/nearest-to-face on mesh triangles merged priority-aware in move/click paths. Drafting Settings 3D Object Snap tab is fully live (was dead placeholders); Nearest-to-face off by default. TDD: behavioral LINE-to-solid tests plus engine/scene unit tests.
AutoCAD stores a layout's sheet as the plotter driver's canonical media
name (`ISO_A4_(210.00_x_297.00_MM)`, `ANSI_full_bleed_B_(11.00_x_17.00_Inches)`),
so a drawing saved here has to carry the same spelling for AutoCAD to find
the sheet in its DWG To PDF list, and a name that arrives from AutoCAD must
resolve to its dimensions and go back out untouched.
- New `io::paper_catalog` replaces the eight-entry `paper_sizes`: ISO A/B,
ANSI, ARCH (incl. E1) and JIS series with full-bleed / expand variants,
Letter / Legal / Tabloid, millimetre and inch units, a parser that
reconstructs any well-formed AutoCAD name (custom or driver-specific)
from its embedded dimensions, driver / legacy-config aliases (`A4`,
`Letter`, `Ledger`), and dimension matching that prefers the plain sheet.
- The Plot dialog stores the canonical name and shows the sheet as
`ISO A4 (210 × 297 mm)`; a sheet that only exists in the drawing is
listed first so it stays selectable.
- A sheet the user did not change keeps the drawing's own media name
(`paper_name_for_settings`), so a Windows printer's `A4` is not rewritten
to `ISO_A4_(…)` just by passing through the dialog.
- Drops the unused `PlotFormat` / `PlotOrientation` messages,
`paper_label_from_dims`, and three duplicated `match "A4" | …` tables.
Tests: catalogue spelling, parser round-trip, aliases, dimension matching,
display formatting, plus dialog ↔ layout round-trips for driver-named,
catalogue and unknown sheets.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Drafting Settings dialog gets text inputs for Snap X/Y spacing plus a working Equal X and Y checkbox (mirrored inputs, Y follows X on apply). Snapper gains fixed snap_spacing_x/y (persisted in UserSettings, default 10) decoupled from the adaptive visible-grid step. Grid snap no longer aperture-gated: with Snap On it rounds every point to the grid, object snaps still override by tier. Adds parse/lock regression tests.
- IMAGEEMBED: pack raster images into OLE2FRAME entities so a .dwg is
self-contained; 'Embed Image' entry in the XREF attach menu; control/MCP
op embed_image for external tools; dxf_name for OLE2FRAME queries.
- Scene: populate_images_from_document now rebuilds OLE2FRAME and PDF
underlay models too (they used to vanish after any XREF op).
- Printing: add PRINTER_ENUM_NETWORK pass when listing printers; GDI
spooler fallback (hayro raster at 300 DPI + StretchDIBits) for hosts
whose PDF handler registers no print verb; DEVMODE orientation with a
90-degree raster rotation fallback for v4 drivers; fix the fit-scale
precedence bug that printed blank pages.
- PDF export dialogs on Windows use the async file dialog so the native
overwrite confirmation no longer deadlocks the UI thread.
- Plot dialog: persist the chosen printer (saved on selection) and the
picked plot window across sessions; page setups with no device no
longer reset the output device.
- Community fonts: detect unresolvable .shx references on open and offer
a download from the repository's fonts/ folder (contribution guide in
fonts/README.md); custom font source URL setting for intranet font
servers; downloaded fonts resolve from the per-user fonts directory.
Port press-to-capture dialog safeguards to the alias editor: transient top draft row with explicit accept, duplicate-alias and unknown-command danger styling plus persistent banners, reset-to-defaults with inline confirmation, Apply and Apply-and-Exit, alias count, Esc-cancels-draft-first, and unsaved-changes guard on close.
Refresh associations after complete SpaceMouse camera updates and recognize imported paper-space owners without Layout objects. Use kernel containment, intersection, perpendicular and spline tangent solving; pin cadkernel 7ce27f2 and add regressions.
Row menu Select New Path and Find and Replace now act on the right-clicked row via dedicated XrefRowPathPick / XrefRowFindReplacePrompt messages (prefill + command-line focus, XOPEN output included). Rows use a RightClickArea wrapper so right-click selects the row even though ContextMenu captures the press, and opening or acting on the menu resets the Change Path Type flyout state.
The Change Path Type row shows a right-triangle affordance and reveals the Make Absolute / Make Relative / Remove Path submenu beside it. The flyout opens on hover only and a shared submenu-row style removes dead code from the earlier iterations.
Row right-click menu is exactly Open, Attach..., Unload, Reload, Detach, Change Path Type group with Make Absolute, Make Relative, Remove Path, Select New Path, Find and Replace. Change Path Type renders as indented group. Open uses OCS for DWG and OS default for images and PDFs. Preview decodes on selection change, not only at refresh. Details shows placed display width and height for image instances.
Right-click actions bound to the row under the cursor, split-button toolbar groups with shared borders and hover states, and a notice when an operation needs a selection first.
Paper-space commands could not pick model geometry displayed by a layout
viewport: `hit_test_wires` deliberately excludes viewport content in PSPACE,
and that has to stay true for selection. This adds the capability as a separate
query rather than by changing those semantics.
`OpenCADStudio::paper_viewport_snap` walks the current layout's displayed
content viewports top-most first, skips those whose display is off or whose
clip boundary excludes the cursor, and for each one runs the EXISTING snap
engine against that viewport's model wires using the viewport's own camera and
screen rectangle (`viewport_edit_frame_for`). The accepted model point is
mapped back onto the sheet with `ViewportFrame::model_to_paper`, so everything
downstream keeps working in paper coordinates — LINE still draws at the
projected paper point. Grid snap and the paper-space rubber-band origin are
suppressed for that pass; results outside the clip are rejected so no snap
lands on a clip cut. Locked viewports snap like unlocked ones.
No projected geometry is rebuilt per pointer event: the wire set is the
renderer's resident per-viewport Arc (`model_wires_for_viewport_arc`) and the
broad phase reuses the shared interaction index over it.
The result is merged with the ordinary paper-sheet snap by `snap::merge_snap`,
which applies the engine's own priority-then-distance rule, in both the
cursor-move and the click paths.
`SnapResult` gains Copy fields `viewport: Option<Handle>` and
`source: Option<DimensionAssociationSource>`; the engine fills `source` from
the owning wire wherever it knows it. `AcceptedSnap::from_snap` converts a
result plus frame into the shared PR2/PR3 contract type.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Constraint delete: a Properties-panel row delete button, viewport
click-to-select on a constraint glyph pill with Delete-key support, and a
right-click "Delete Constraint" menu item — all routed through one
undoable Scene::selected_constraint-aware path.
Fixes two named-parameter bugs found while testing that feature:
- DIMCONSTRAINT: a parameter named like a mode-switch keyword ("r", "d",
"a", "x", "y") could never be referenced, since the keyword check ran
before the parameter-name check.
- PARAMETERS modal Apply rebuilt Scene::named_parameters but never
refreshed the Properties panel, leaving renamed/deleted rows stale
until an unrelated refresh (e.g. a selection change) happened to occur.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A day of pan/zoom that had suddenly become unusable on a 1.2M-entity
drawing turned out to be no regression at all: an unattended NVIDIA
userspace update had been applied without a reboot, the Vulkan ICD could
no longer talk to the still-loaded kernel module, and wgpu silently fell
through to Mesa's llvmpipe. Nothing in the app said so. iced picks the
adapter and names it only under RUST_LOG, so the only evidence was 32
`llvmpipe-N` threads in /proc. The same silence covers WARP on Windows,
SwiftShader in browsers, and the case where wgpu finds no adapter at all
and iced quietly draws the chrome with tiny-skia while the shader widget
is dropped, leaving a blank viewport. This commit makes all of that
visible, on every platform, without new dependencies.
Detection (src/scene/pipeline/mod.rs)
-------------------------------------
`GpuStatus` is derived from two signals:
* `record_gpu_adapter`, run from `MultiPipeline::new` (once per device,
next to the existing uncaptured-error handler), reads
`Device::adapter_info()`, prints one `[gpu] adapter: <name> (<backend>,
<device type>, driver …)` line — stderr natively, `console.warn` on the
web, which has no stderr — and keeps a copy.
* `note_scene_draw`, run from `ViewportPane::draw`, counts how often the
viewport asked for a primitive. Every renderer makes that call; only
wgpu goes on to `prepare` and create a device. Three draws with no
device ever recorded therefore mean the primitive is being dropped.
The verdict is one of `Unknown`, `Hardware`, `Software(adapter)` or
`NoRenderer`. `Software` is `DeviceType::Cpu` — what Vulkan reports for
llvmpipe, DX12 for WARP and GL for a renderer string that gives it away —
plus a name match on the fallbacks browsers expose (SwiftShader, llvmpipe,
lavapipe, "Microsoft Basic Render"), because the WebGPU backend reports
every adapter as `Other` (gfx-rs/wgpu#8819). Metal has no software device,
so on macOS only `NoRenderer` can occur (a VM without a GPU); it is caught
by the draw count like everywhere else.
`gpu_status_if_changed` costs one atomic load per app message: a
generation counter moves only when a device is recorded or the draw count
crosses its threshold, so the app re-derives the verdict a handful of
times per session.
Notification (src/app/startup.rs, view/modal.rs, ui/statusbar)
-------------------------------------------------------------
`refresh_gpu_status` runs after every message. On a degraded verdict it
speaks through three channels, because many users never read the command
line:
* A popup, `ModalKind::GpuWarning`, queued once per verdict through the
startup-modal queue so it waits its turn behind the file open. It names
the adapter, states the consequence (slow navigation, unstable or
missing rendering) and gives the remedy that usually applies on the
running platform: a driver update not yet followed by a reboot on
Linux, a missing driver or a Remote Desktop / VM session on Windows, a
VM without a Metal device on macOS, hardware acceleration switched off
in the browser. "Don't show again for this device" stores
`GpuStatus::identity()` in `settings.gpu_warning_silenced`; keying it by
verdict means silencing "software rendering on llvmpipe" does not
silence a later, different failure.
* A status-bar pill in the theme's warning colours, `⚠ Software rendering`
or `⚠ No GPU renderer`. It is not a `StatusPill`, so it cannot be hidden,
and it stays for the session; clicking it reopens the popup, silenced or
not.
* A command-line entry through the new `CommandLine::push_warning`, which
is styled like an error but deliberately does not touch `last_error` /
`error_revision`: automation reads those to decide whether the command it
just ran failed, and a graphics warning is not a failed command.
`subscription()` requests frames only while the verdict is `Unknown` on a
document tab (the Start page draws no viewport), so the probe costs one
frame on a working GPU, three on none, then stops.
Verification
------------
* Live on the machine that had the incident, with the Vulkan loader
restricted to Mesa (`VK_DRIVER_FILES=…/lvp_icd.json WGPU_BACKEND=vulkan`):
popup → OK → pill → click reopens; "Don't show again" → restart → pill
only, no popup.
* `gpu_tests::the_adapter_is_reported_once_per_device` (ignored, needs an
adapter) asserts the classification on a real device; it was run on both
llvmpipe (`Cpu`) and an NVIDIA GT 1030 (`DiscreteGpu`).
* Unit tests cover the name heuristic, the verdict function, the identity
rule, the warning text with an adapter name that itself contains
parentheses and commas, the settings round trip and the command-line
semantics. New strings are in all 21 locales as the `gpu` Fluent group.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Builds from main reported only the release version (2026.36) even when
HEAD was hundreds of commits past the tag. build.rs now also emits
OCS_TAG_DISTANCE, OCS_COMMIT_DATE, OCS_BUILD_METADATA and
OCS_FULL_VERSION: a clean checkout of the release tag stays "2026.36",
anything else becomes "2026.36+194.gef189d77", with ".dirty" appended
for uncommitted changes and only the hash when no tag can be counted
from (shallow clone, tarball). OCS_APP_VERSION is unchanged so the
update check, donation gate, User-Agents and window title keep working.
The About dialog gains Build / Commit date / Profile cards, Copy Info,
the REPORT issue template and recovery reports carry the full version,
and `-V`/`--version` print it instead of Cargo's 2026.36.0. Release
workflows check out full history so release binaries see the tag.
Also fixes the build being marked dirty when there is no repository:
diff-index exits 128 there, not 1.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The MTP/M2P midpoint-between-two-points modifier existed as a typed transparent command only. Add it to the Shift+RMB snap override menu as an icon-only cell after Parallel (hover tooltip, no text) with a new osnap/mtp.svg marker, plus a context-menu entry while a point prompt is active.
value toggle, and redesigned constraint-ribbon icons
Properties panel:
- New "Parameters" section (shown with no selection) listing every named
parameter with inline name/formula editing, add, and delete, backed by
new PropValue::ParamRow/ParamAddRow and command_driver handlers
(resolve_named_parameter_edit, on_prop_param_commit/_delete/_add_new).
A fresh parameter's formula now defaults to "1", not "0" — a 0-length
seed value is a genuine solver singularity for a Distance constraint
driven by that parameter, with no defined direction to grow back out of.
- New "Constraints" section (shown for a single selected entity) listing
every constraint touching it as a clickable PropValue::EntityLink that
selects the linked entities in the viewport, danger-tinted when the
constraint conflicts.
Constraint pills:
- New Options > General toggle, "Show values and parameter names on
constraint markers" (on by default, persisted). Off, every pill shows
just its bare glyph instead of glyph+driven-value/parameter-name — the
glyph alone is enough to see a constraint is present, without the value
text covering nearby geometry on a dense sketch.
Constraint-ribbon icons:
- Replaced all 18 unicode/letter glyph icons (including the plain "F",
"L", "M", "S" letters) with proper SVGs under assets/icons/constrain/,
matching the Modify section's two-color style (#B4B6B9 white / #6DB7ED
blue, consistent stroke width). Tangent reuses the Draw section's
white-arc-plus-blue-dots motif.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The application has no support-file search path — the four folders it uses
are functions returning fixed paths, not settings. Rather than build a Files
page that pretends otherwise, this one answers the question people actually
open it to ask: where does this thing keep my plot styles. Each row shows the
location and opens it in the file manager, and a row whose path the platform
could not give says so with its button disabled.
General gains buttons through to the plugin manager, the keyboard shortcut
editor and the alias editor. Those three have good dialogs of their own and
are not absorbed; Options simply stops being a place you cannot reach them
from.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The ViewCube, the UCS icon, its at-origin placement and selection cycling all
have commands and status-bar pills, and all four kept their value only on the
app struct. Turn the ViewCube off with NAVVCUBE, restart, and it is back.
Nothing failed — the setting evaporated — so a checkbox for any of them would
have been a checkbox that forgets. They are persisted first, with a
round-trip test, and only then given controls.
The new 3D Modeling page carries the three view tools plus the drawing
variables that decide how solids are tessellated: ISOLINES, DISPSILH, SURFU,
SURFV, SURFTYPE, SOLIDHIST and SHOWHIST. Those are saved in the DWG rather
than in preferences, so the page says so beside each group and hides them
entirely when no drawing is open.
Changing them also rebuilds the geometry. The SETVAR path never did, which is
why the comment beside LTSCALE's invalidation exists — the same reasoning
applies here, and without it a new isoline count does not appear until some
unrelated edit rebuilds the solid.
Selection cycling joins the Selection page next to the other two selection
modes, since that is what it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two drafting preferences had no proper home. The Drafting Settings dialog
displays the drafting rotation and offers only a Reset button — there was no
way to type an angle short of `SETVAR SNAPANG`. The polar tracking increment
existed in exactly one place: a pop-up hanging off the status-bar pill.
The rotation is a text field over an edit buffer rather than the value
itself, so clearing it to retype does not snap the crosshair to zero on the
way through; the buffer is reseeded whenever the value is restored from
behind it. Angles render without a trailing `.0`, matching how the polar
pop-up has always shown them — same kind of number, same reader.
Snap modes, grid spacing and object snap stay in Drafting Settings, where
they belong; the page links to it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Zoom direction and factor, whether TEXTEDIT ends after one object, whether
continued dimensions inherit the base dimension's style, which points QDIM
measures from, and which annotative objects pick up a newly set scale. All
six work today; none had a control.
Two of them needed their meaning worked out rather than copied.
ANNOAUTOSCALE stores the mode in the magnitude and on/off in the sign, and
the four modes are not documented anywhere in the app — the command prompt
just says `[-4..4]`. Reading `add_annotation_scale_to_objects` gives them:
1 skips layers that are off, frozen, locked or frozen in the viewport, 2
keeps the locked ones, 3 skips only locked, 4 takes everything. The dropdown
names them instead of showing bare numbers, and choosing Off negates rather
than zeroing, so the mode survives being switched off and back on — which is
the convention the status-bar pill already follows.
The QDIM origin priority had no system variable at all; it could only be
reached through a keyword inside the running command.
Drawing units stay in their own dialog; this page links to it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three settings that work, persist, and could only be reached by typing their
name: TEXTFILL, CLIPROMPTLINES and COMMANDLINEFADETIME. The last two govern
how much of the command window is prompt and how long its history lingers —
the kind of thing people fiddle with once and then leave, which is exactly
what a settings dialog is for.
One fix rides along. TEXTFILL is a process-global, so changing it invalidates
the text in every open drawing; the SETVAR path rebuilt only the active tab,
leaving the others rendering the previous setting until an unrelated edit
happened to rebuild them. Both paths now go through
`invalidate_text_everywhere`, so the checkbox and the command cannot disagree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Hakan Seven