Add a transparency_enable uniform read by the wire shader: when the new
TPY pill is off, every line is forced opaque; when on, baked entity
transparency shows through. Toggling is a uniform write, no retessellate
(same mechanism as the lineweight-display toggle). Pill is toggleable
from the status-bar customization menu.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two paper-space rendering fixes:
- The full-canvas sheet instance no longer draws model-block hatches/
wipeouts/images. Those belong inside the floating content viewports;
rendering them on the sheet let them bleed past the viewport borders
when model coords overlapped the paper area. The sheet now draws only
the paper block's own fills plus the synthetic white printable area.
- Pan/zoom/orbit inside a double-clicked floating viewport (MSPACE) now
re-culls and re-uploads the viewport's wire set. The per-viewport wire
cache key now hashes the viewport's own view (pan + zoom + orbit), and
the active-viewport pan/zoom/orbit handlers bump camera_generation so
the GPU re-uploads. Previously the stale frustum-culled subset stayed
on the GPU, so newly-revealed lines were invisible (hatches, uploaded
as the full set, still showed) until MSPACE was exited.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The overall "sheet" viewport now IS the paper view, so its own border
rectangle must not be drawn as an entity — filter it out of
paper_sheet_wires_arc (content viewport borders are kept).
Also update the doc comments that still referenced the removed
PaperCanvas widget / paper_canvas_wires to describe the GPU sheet path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Paper space now renders entirely through the unified GPU shader, exactly
like model space — there is no separate 2-D canvas. The full-canvas
top-locked "sheet" viewport draws the layout's entities, hatches,
wipeouts and images; the desk is the container background and the white
printable area is a synthetic solid hatch.
- The white sheet fill uses draw_depth -2.0 (entity fills/wires are in
the signed (-1, 1) range) so it is always strictly behind every object,
with a negligible z offset (BIAS 0.001) — no far-plane clipping.
- Delete src/scene/paper_canvas.rs (the PaperCanvas widget) and its dead
helpers (paper_canvas_wires / paper_sheet_wires / paper_canvas_cache).
paper_canvas_hatches / _wipeouts remain — still used by paper hit-test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Paper space now renders its sheet through the unified shader, the same
path as model space: a full-canvas "sheet" ViewportInstance draws the
layout's own entities + viewport borders + interim/preview wires, with a
camera locked to the top/plan orientation (paper is 2-D and never
orbits). Floating content viewports overlay it.
- PaperCanvas no longer draws entity wires (still paints the desk, sheet
and hatch/wipeout/image fills; full removal is the next step).
- Right-drag on the paper sheet no longer orbits the camera (it would
corrupt the frame and skew subsequent pans).
- Fix floating-viewport orbit oscillation: orbit_active_viewport wrote
view_direction.y negated while camera_for_viewport reads it un-negated,
so each drag step read back a Y-mirrored camera and flipped the model
between a rotation and its opposite every frame. Store eye directly,
matching snap_active_viewport_to_direction and the reader.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DRAWORDER now affects rendering immediately (bump geometry epoch so the
sort cache rebuilds) and front/back anchor to the block's full effective
sort range instead of only existing table entries, so bring-to-front
actually lands on top. The render fallback sorts table-absent entities by
their own handle.
Draw order now applies across entity types, not just within a type. A
per-entity draw-order rank (SortEntitiesTable override or own handle,
ranked per block) is encoded as a small signed clip-z bias in the wire,
hatch, image, and 3DFACE pipelines. The shared LessEqual depth buffer then
orders fills, lines, rasters and 2D solids against each other regardless of
pass order — without touching model coordinates. 3D meshes keep real
geometric depth; wipeouts stay always-on-top.
Adds a Draw Order submenu to the viewport context menu (Bring to Front,
Send to Back, Bring Above/Send Under Object). The above/under items run an
interactive reference-object pick, then reorder the captured selection.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
`model_wires_for_viewport` previously passed `view_aabb: None` and
`wpp: None` to `tessellate_entity` — the assumption that paper-space
viewports were too small for culling to matter falls over the moment
the document carries 100k+ entities. Each frame re-tessellated the
full model through every floating viewport.
`wires_for_block_culled` grows two optional parameters
(`frozen_layers`, `anno_scale_override`) and now flips its
`world_offset` / `bg` / `anno` selection on `is_model_block` rather
than `current_layout`, so a paper-layout caller asking for the model
block still gets WCS-subtracted coordinates and the right annotation
scale.
`model_wires_for_viewport`:
- derives the viewport's frustum AABB from its (paper-zoom-invariant)
camera + entity aspect — 25 % margin to match `view_world_aabb`,
- derives `wpp` from the on-paper pixel height the viewport currently
occupies, so LOD stubs and zoom-adaptive curve sampling track the
paper-zoom state,
- delegates everything else to `wires_for_block_culled` so block /
layer / frozen-layer / curve-tolerance handling stays in one place.
`model_wires_for_viewport_arc` keys on `(geometry_epoch,
round(screen_height_px))` — sub-pixel jitter still hits the cache,
real paper-zoom steps invalidate. Hit-test / CPU-projection callers
pass `screen_height_px = 0.0` to get the no-LOD (full-fidelity) wire
list in their own cache slot.
Tiled Model panes were all reading from the shared `entity_wires_arc`,
whose tessellation runs `view_world_aabb` / `world_per_pixel` against
the live `Scene::camera`. Zooming the active tile re-built that arc
with the active camera's LOD / frustum cull, then every other tile
rendered from the same arc — content in the inactive panes flickered
between full and LOD-stub tessellations as you zoomed.
- `wires_for_block` now delegates to `wires_for_block_culled`, which
takes `view_aabb` + `wpp` explicitly. The original caller passes
the live-camera values; tile rendering passes its own.
- New `model_tile_wires_arc` builds a per-tile view AABB + wpp from
the tile's camera + pixel rect and caches the result. Cache is
keyed by tile index; the value holds `(geometry_epoch,
camera_state_hash)`, so a stale hit (camera moved, doc changed)
still misses and rebuilds.
- `ViewportInstance` gains `tile_idx` so `viewport_data_for` can route
Model tiles into the per-tile cache without disturbing the paper-
layout content-viewport path (it still uses `model_wires_for_viewport_arc`).
The previous off-canvas fix sized each per-viewport MSAA / depth /
resolve texture to the full viewport rect, then UV-cropped the blit.
With deep paper-space zoom that rect can grow past wgpu's 8192-pixel
texture limit and the program panics in `Device::create_texture`
("Dimension Y value 9493 exceeds the limit of 8192").
`viewport_data_for` now clips the screen rect to the canvas before
returning the `ViewportData`, so the per-viewport textures are bounded
by the surface (≤ canvas size, always within the GPU limit). The
camera frustum is still built at the *full* vp aspect (so the world it
projects matches the viewport entity), and a new `crop_view_proj`
post-multiplies the standard view_proj by a clip-space transform that
remaps the visible sub-rect to NDC `[-1, 1]^2` — the off-center ortho
that lets the visible-sized MSAA carry the correct portion of the
view. `viewport_size` is set to the visible size for the wire shader's
screen-space line extrusion; `world_per_pixel` is crop-invariant (the
`vs` factor cancels) so the value `Uniforms::new` computes from the
full bounds remains correct.
Viewports whose screen rect doesn't intersect the canvas at all return
`None` and are filtered out before any inner pipeline is allocated.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Refactor the per-viewport blit so a content viewport whose screen rect
extends off the canvas composites the correct slice of its MSAA target
to the visible portion of the surface, instead of being slammed against
the canvas corner by an `(f32 as u32)` saturation on the negative
offset.
- blit.wgsl + Pipeline gain a small uniform buffer (`uv_offset` /
`uv_scale`). `Primitive::prepare` computes the per-viewport crop from
`screen_rect`'s on-canvas fraction and writes it via the new
`upload_blit_uv` helper while it still has the `Queue`.
- `Pipeline::render` now takes `vp_size` (full vp — MSAA / camera size)
and `surface_dest` (visible intersection — blit destination) and
reads the crop from the uniform; passes that don't have a non-empty
surface intersection are skipped.
- `Primitive::render` clips the full vp rect against the surface clip
in `i32` and skips empty intersections. The earlier "skip GPU for
inactive off-canvas viewports" workaround in `active_viewports` is
no longer needed.
- ViewCube draws only when its hosting vp is fully on-canvas (its own
pipeline writes directly to the surface and would distort under a
clamped `set_viewport`).
With the GPU path correct for every vp position, drop
`viewport_content_wires` from `paper_canvas_wires` — the inactive
viewport CPU projection was only there to mask the blit bug and was
duplicating the unified shader's output. The hit-test / snap path
(`entity_wires_arc`, `wires_for_block`) still calls
`viewport_content_wires` directly, so picking through inactive
viewports keeps working.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Collapse the paper-space rendering path into the same shader widget the
model layout uses. The PaperCanvas widget draws the paper sheet, paper
entities and viewport borders underneath; the unified shader paints all
content viewports on top, scissored to each viewport's rect.
- Drop PaperViewportPane / PaperViewportPipeline newtype /
PaperViewportPrimitive, ViewportPaneMode::Paper, ViewportPane::paper,
build_primitive and build_viewport_primitive. Scene exposes only
build_viewports.
- view.rs: the paper branch stacks PaperCanvas + the unified shader
instead of the old paper_canvas_view function. The active paper
viewport's blue border, render-mode picker and ViewCube hit-area are
layered in the same viewport_stack as the model layout.
- Transparent shader clear (alpha=0) + alpha-blended blit pipeline so
the underlying widget (container bg in model, PaperCanvas sheet in
paper) shows through everywhere the shader has not painted geometry —
including inside content viewport rectangles.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Route every per-frame interaction through the active model tile's screen
rectangle so a tiled VPORTS layout behaves like independent panes while
still sharing one shader widget:
- pick / draw / snap / box+lasso: cursor mapped to tile-local space; the
hover-activates-tile rule on ViewportMove keeps the active tile under
the cursor, so the picked camera matches what the user sees.
- pan: switched to Camera::pan_screen(dx, dy, viewport_height) so the
world-per-pixel rate matches the active tile's height instead of the
full canvas.
- grid: clipped via Frame::with_clip to the active tile rect; world→screen
adds the tile origin so the lines align with the panel.
- UCS icon: origin offset by the tile rect so the gizmo sits in the
active tile's bottom-left corner.
- render-mode picker (+ split buttons) and ViewCube hit-area: positioned
via active_model_tile_bounds with leading Spaces, mirroring the
floating-viewport pattern.
- ViewCube hover: driven by the CursorMoved/ViewportMove handlers into a
new Scene::viewcube_hover cell, so the highlight survives the cube
hit-area overlay masking events from shader::Program::update.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
build_viewports, active_viewports'un ViewportInstance listesinden
viewport başına ViewportData üretiyor (model: tüm model wire'ları;
paper viewport: layer-freeze'li alt küme). Model space artık
ViewportPane::model -> build_viewports üzerinden birleşik çoklu-viewport
yolundan render ediliyor — şimdilik tek tam-ekran viewport, davranış
birebir aynı.
Paper space hâlâ eski yolda (PaperCanvas + PaperViewportPane); sonraki
adımda birleşik yola taşınacak.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Birleşik viewport mimarisinin yapısal temeli. Primitive artık tek kamera/
geometri yerine viewport başına bir ViewportData listesi taşıyor; yeni
MultiPipeline her viewport için bir iç Pipeline instance tutuyor.
prepare/render viewport listesi üzerinde dönüp her iç-pipeline'ı kendi
(normalized) ekran rect'ine çiziyor.
Mevcut Pipeline kodu (upload/LOD/render/blit) HİÇ değişmedi — sadece
viewport başına bir kez çalışıyor. build_primitive ve
build_viewport_primitive tek-elemanlı liste (FULL_VIEWPORT_RECT)
ürettiği için render davranışı tek-viewport ile birebir aynı; çoklu
viewport sonraki adımda (view.rs tek widget + active_viewports) aktive
edilecek.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Paper-space'de bir viewport'a çift tıklanıp aktif hale gelince, model
space'deki gibi sol üst köşede render-mode dropdown'ı ve sağ üst köşede
ViewCube gösteriliyor.
- render_mode_picker helper'a çıkarıldı; model space ve aktif paper
viewport ortak kullanıyor (kod tekrarı yok)
- SetRenderMode artık viewport-aware: aktif viewport varsa o viewport
entity'sinin render_mode'unu, yoksa model-layout tab stilini günceller
(Scene::active_viewport_render_mode getter/setter)
- build_viewport_primitive'e show_viewcube parametresi; aktif viewport
primitive'i ViewCube gizmo'sunu çiziyor
- PaperViewportPane shader::Program artık Message'a özelleşti ve sol
tık ViewCube hit-test'ini bounds-relative yapıp ViewCubeSnap üretiyor
Bilinen sorun: picker/viewcube doğru konumda görünüyor ancak tıklamalar
üstteki viewport_mouse mouse_area katmanına gidiyor; katman sırası bir
sonraki adımda düzeltilecek.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
3D yüzeyleri (Solid3D mesh, 3DFACE quad, PolyfaceMesh/PolygonMesh face
tris) HiddenLine modunda renk yazmadan z-buffer'a yazıyor; ardından
kenarlar wireframe pipeline ile çizilince LessEqual depth testi
arkadaki segmentleri eliyor. 2D fill'ler (text greek, MultiLeader
arka planı) ayrı bir vertex buffer'a ayrıldı ve her modda renkli
çizilmeye devam ediyor.
- Face3DGpu: vertex_buffer artık 3D / 2D olarak ikiye ayrıldı
- mesh_depth_pipeline + face3d_depth_pipeline (write_mask=empty)
- RenderModeFlags.hidden_line + Primitive.hidden_line plumbing
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Wireframe 2D/3D modlarında Solid3D meshlerini edge-only çizmek için
LineList topolojili bir mesh wireframe pipeline ve her üçgenin
(a,b),(b,c),(c,a) kenarlarına genişletilmiş ayrı bir index buffer
eklendi. PolyfaceMesh / PolygonMesh face fill'leri (fill_tris + dolu
points) wireframe'de gizleniyor; text greek / MultiLeader gibi 2D
fill'ler (points boş) etkilenmiyor.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Replaces the binary Wireframe/Solid toggle with a 7-mode dropdown
that maps onto acadrust's `ViewportRenderMode` enum: Wireframe 2D /
Wireframe 3D / Hidden Line / Flat Shaded / Gouraud Shaded / Flat
Shaded + Edges / Gouraud Shaded + Edges. Per-tab state lives on
`DocumentTab::render_mode`; the old `SetWireframe` message forwards
to `SetRenderMode` so the ribbon + WIREFRAME / SOLID command line
keep working.
`scene::render::render_mode_flags()` translates the mode into three
pipeline-facing booleans (`face3d_fill`, `mesh_fill`,
`show_3d_edges`); `mesh_fill` / `show_3d_edges` are stubs that the
upcoming phases will consume. `Primitive` carries the derived
`view_wireframe` plus the two new fields through to `prepare()`.
`Pipeline::upload_face3d` takes a `wireframe_only` flag that drops
3DFACE quad fills (built from `key_vertices`) while keeping the
`all_wires.fill_tris` channel — that channel carries text-LOD greek
rectangles and PolyfaceMesh face triangles which must stay visible
in wireframe mode. 3DFACE edges stay on regardless of mode.
Solid3D mesh wireframe rendering, Hidden Line z-prepass, and Flat /
Gouraud shader uniforms come in phases 1–4.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Five chunks moved out of the 5965-line scene/mod.rs to live with the
entities they belong to:
- wide_lwpolyline_fills → entities/lwpolyline.rs::wide_fills
- wide_polyline2d_fills → entities/polyline.rs::wide_fills
- polyline_segment_fill → entities/common.rs (shared by both above)
- text_obb_corners_native + text_baseline_points + text_greek_obb_tris
→ entities/text_support.rs (handles Text/MText/Attribute alike)
- append_insert_attribute_wires → entities/insert.rs
Net: scene/mod.rs 5965 → 5404 lines (~560 lines extracted). Three
helpers in scene/render.rs / scene/block_cache.rs widened from
pub(super) to pub(crate) so the relocated functions can still reach
them. scene::entity_aabb also widened for the same reason.
scene::tessellate_entity_dim_text stays put — it's a thin wrapper
around the private tessellate_entity dispatcher and moving it would
require exposing tessellate_entity's full signature across the crate.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Each entity's tessellation now lives alongside its definition in
entities/*.rs, attached to the entity type via a local trait:
LegacyTess — Viewport / Insert / Hatch / Ole2Frame
(fallback path for entities not on the truck pipeline)
LeaderTess — Leader
MultiLeaderTess — MultiLeader
DimensionTess — Dimension (carries its dim-only helpers too:
~1700 lines of dim_geometry, dim_text_*, format_*,
tolerance, suppression, etc.)
scene/tessellate.rs keeps only the cross-entity dispatcher plus the
shared dim machinery reused by leader/multileader/dimension
(ArrowKind, DimGeom, append_arrow, arrow_from_block, add_segment,
add_polyline, normalized_or, push_tri, color_or_inherit, entity_z,
offset_snap_pts). Cross-entity arc helpers + aci_to_rgba moved to
scene/tess_util.rs.
scene/tessellate.rs shrinks from ~3300 to 809 lines. Compile clean,
all 9 tests pass.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
LWDISPLAY (Show Lineweight) flipping the toggle no longer triggers a full
retessellate. `render_style_for` always bakes the entity's resolved (layer-
inherited) lineweight, and the wire shader reads `Uniforms.lwdisplay_enable`
to either honour the per-vertex half_width or collapse the quad to a 1 px line.
Side effect: PDF export now uses the real lineweight regardless of LWDISPLAY,
matching AutoCAD's plot semantics (LWDISPLAY only affects screen render).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Header system variables that change how the file renders were being
ignored. Wire them through the render path:
- PDMODE + PDSIZE: Point entities draw the requested glyph shape
(dot / + / × / | with optional enclosing circle and square) sized by
PDSIZE. Default PDMODE 0 keeps the single-vertex fast path.
- ATTMODE: INSERT attribute rendering now respects 0=Off (no attribs),
1=Normal (per-attrib invisible flag), 2=On (force all visible).
- FILLMODE: when false, hatch / wipeout / face3d-fill uploads are
short-circuited so the renderer draws wireframe only.
- LWDISPLAY: when false every entity falls back to the 1-pixel base
width, matching AutoCAD's "Show Lineweight" toggle.
- MIRRTEXT: when false, MIRROR keeps text / mtext / shape rotation +
oblique angle (so text stays right-reading) while still mirroring
position.
DISPSILH / PLINEGEN were also reviewed: render path already honours
the per-polyline plinegen bit and we don't yet render Solid3D
silhouettes, so the header values are read for round-trip but produce
no extra effect here.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The batched hatch pipeline has soaked through visibility + LOD; it's
correct on every file tested (Floor plan.dxf, UTM site plans, the
non-UTM regression case). Time to remove the parallel per-hatch
plumbing that's been sitting empty since step 3:
- `gpu_hatches: Vec<HatchGpu>` — never populated since
`upload_hatches` switched to the batched builder; dropped.
- `hatch_pixel_scissors`, `hatch_skip_flags` — same story; dropped.
- `compute_hatch_scissors` — no longer has a consumer; dropped, with
the render-time call removed from `Primitive::prepare`.
- Hatch render pass — the dead `else if` branch over `gpu_hatches`
is gone; only the single batched `pass.draw(0..vertex_count, 0..1)`
remains.
- `compute_hatch_lod` — no fallback path; if `gpu_hatch_batched` is
`None` (empty hatch list) it just returns early.
`HatchGpu` itself stays — the wipeout pipeline still uses it. So do
`hatch_pipeline` / `hatch_bgl1`, kept around for that path.
`#[allow(dead_code)]` on the four storage-buffer fields in
`HatchBatchedGpu` — they exist only to keep the bind group's
referenced resources alive; nothing reads them directly.
Known gap left as a follow-up: per-hatch viewport scissor for paper-
space MSPACE viewports isn't ported to the batched path yet. Hatches
inside a paper-space viewport can render past the viewport border
until that's added. Hasn't surfaced as a visible regression in the
test files so far.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds a dedicated `visibility: array<u32>` storage buffer (binding 4)
alongside the existing batched hatch buffers. Vertex shader reads
`visibility[v.instance_index]` — 0 → emit an out-of-NDC clip
position so the GPU rasterizer clips the primitive before the
fragment stage runs.
`compute_hatch_lod` now drives this buffer instead of (or alongside,
for the per-hatch fallback) `hatch_skip_flags`. Walks a per-instance
CPU AABB mirror that the builder fills at upload time (`instance_aabbs`),
applies the same `aabb_below_pixel` (sub-pixel LOD) OR `aabb_offscreen`
(frustum cull) rule the legacy path used, and pushes the resulting
0/1 flags via `queue.write_buffer` on a separate 4 B-per-hatch buffer
— ~40 KB per pan tick for 10 k hatches, far cheaper than re-writing
the 112 B-per-instance data.
Step 5 will remove the legacy `gpu_hatches` Vec, the per-hatch draw
loop, and `hatch_skip_flags` once the batched path has soaked.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The Phase 2.1 step-4 attempt at culling hatches inside
`synced_hatch_models` was wrong: GPU hatch/wipeout buffers are
uploaded on geometry_epoch only (see render.rs — they're "static
buffers"), so any CPU-side cull at build time would freeze the
visible set at the geometry epoch boundary and never re-evaluate on
pan. Reverted that approach; the build-time function now returns the
full visible set again and the cache key is back to geometry_epoch.
The actual per-frame frustum cull moves into the existing draw-time
skip-flag machinery:
- `compute_hatch_lod` now also folds in `aabb_offscreen` (ORed with
the existing Phase 3.3 sub-pixel skip), so out-of-view hatches are
skipped at the draw call.
- New `compute_wipeout_lod` + `wipeout_skip_flags` mirror the hatch
path. The wipeout draw loop honors the flag.
- `Primitive::prepare` calls the new compute step alongside the rest.
Per-frame projection + skip is a few hundred microseconds on dense
docs; far cheaper than re-uploading GPU buffers per pan tick.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
ACIS SAT entities (Solid3D / Region / Body) were tessellated at one
fixed sampling density (CIRC_SEGS=48, GRID_U=32, GRID_V=16) regardless
of how far they were from the camera. Distant solids paid the full
triangle bill for fragments that mostly resolved to sub-pixel size.
Generate three pre-built LODs per entity at load time:
* LOD 0 (HIGH) — 48/32/16 segments. Use above 200 px projected diag.
* LOD 1 (MID) — 24/16/8. Use 50–200 px.
* LOD 2 (LOW) — 12/8/4. Use below 50 px.
Tessellation cost is paid 3× on load (cheap — typical files have few
solids). Render picks per-frame via `compute_mesh_lod` from each mesh's
`world_aabb` projected diagonal. When a level is missing (e.g. a solid
entity that only emits LOD 0), the selector walks down to the nearest
available slot.
API ripples:
* New `LodConfig` (HIGH/MID/LOW) drives `tess_sat`, `tess_cone_face`,
`tess_sphere_face`, `tess_torus_face`.
* `tessellate_solid3d / _region / _body` now return `MeshLodSet`.
* `MeshLodSet { lods: Vec<MeshModel>, world_aabb }` + `from_single`
constructor so interactive truck-based commands (BOX/CYLINDER/etc.)
that only generate one tessellation stay one-line.
* GPU side gets `MeshLodGpu { lods: Vec<MeshGpu>, world_aabb }` and
a `mesh_lod_levels` per-frame index vector.
* STL/STEP export pulls slot 0 explicitly so the on-disk geometry
isn't downgraded by the view-dependent ladder.
Background-thread lazy generation (per the roadmap) is deferred — the
synchronous eager build is fine for typical CAD files. Switch to a
queue + background tessellator when files with hundreds of solids
become a load-time bottleneck.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Hatch fills drew the full per-family pattern loop every frame regardless
of zoom. Two LOD tiers, neither of which existed:
* **Shader-side solid substitute.** When the densest line family's
spacing × scale projects to less than 2 px, individual lines blur
into a solid color and the per-fragment family loop is wasted ALU
(and produces moiré). Pass `world_per_pixel` through Uniforms; the
hatch fragment shader now returns `h.color` directly in that case.
* **CPU-side sub-pixel skip.** When the entire hatch AABB projects
to less than 2 px, drop the draw call. Adds `world_aabb` to
HatchGpu plus a per-frame `compute_hatch_lod` pass (mirrors the
existing scissor pass) and `hatch_skip_flags`. The render pass
skips flagged hatches.
Factored a shared `aabb_below_pixel` helper for future LOD callers.
The Uniforms layout is unchanged in size (96 B) — the trailing
`_pad: vec2<f32>` becomes `world_per_pixel: f32, _pad: f32`, so wgsl
modules that don't read the new field keep working with their old
`_pad: vec2<f32>` declarations.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Wire pass already uses `WireModel.vp_scissor` to clip viewport-projected
geometry to its paper-space viewport rect; hatch / image / wipeout
passes drew across the whole canvas. When a future paper-space path
projects fills/images into a viewport, they would bleed past the
viewport frame.
Add `vp_scissor: Option<[f32; 4]>` to HatchModel and ImageModel
(mirroring WireModel), forward it through HatchGpu / ImageGpu, and add
per-pass `compute_*_scissors` / `set_scissor_rect` machinery. Factored
the wire-side scissor-projection math into a shared `project_scissor`
helper. Field defaults to None at every constructor site — no producer
sets it yet, so this is plumbing for the paper-viewport fill projection
that Phase 1.4 unblocks without changing current visual output.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Frustum culling only helps at zoom-in (offscreen geometry); zoom-out
still tessellated and uploaded every wire even when an entire entity
projected to a single pixel. Now we also drop wires whose world AABB
projects smaller than 0.5px in the active view — a fit-all view of a
city plan skips sub-pixel symbols, lines, and curves before they ever
hit the GPU.
- `Scene` captures `world_per_pixel` each render from camera ortho_size
/ widget height.
- `expand_insert` / `tessellate_entity` take an optional
`world_per_pixel`; per-LocalWire / per-nested / whole-Insert /
top-level entity AABB → pixel-size test → skip if < MIN_PIXEL_SIZE.
- One-off paths (hit-test, viewport pane) pass `None` so they still
see full geometry regardless of zoom.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Block defns and top-level entities now know their world-space XY
AABB, and `tessellate_entity` / `expand_insert` early-out for anything
that doesn't intersect the camera's view rect. Tested commit-only on
time_open (correct subset emitted with default camera); GUI run
pending user verification.
Cache plumbing:
- `LocalWire` / `BlockDefn` carry `aabb_local` (post-build recursive
union over nested defns).
- `Scene::view_world_aabb()` derives a 25%-margined world rect from
the active camera + last-seen render aspect.
- `wire_cache` / `paper_sheet_cache` keys widen to
`(geometry_epoch, camera_generation)` so pan/zoom invalidates the
cached wire list — and pipeline `cached_epoch` widens to match
so the GPU re-uploads on view change.
- `XrefStatus::Unloaded` ack already shipped — orthogonal to this.
Also adds `examples/xref_states.rs` to dump per-block_record xref
metadata for diagnosing the is_loaded / unloaded distinction.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Entity linetype_scale is a per-entity multiplier applied on top of the
document-level $LTSCALE header variable. The previous code used only the
entity scale (defaulting to 1.0), ignoring $LTSCALE entirely. Drawings
with a non-default LTSCALE showed dash patterns at the wrong size.
Effective scale is now: document.header.linetype_scale * entity linetype_scale.
Applied in both render::render_style_for and the complex-linetype path in
tessellate_entity.
Fixes part of #10
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
White entities on light backgrounds (e.g. paper space) render as black;
black entities on dark backgrounds (e.g. model space) render as white.
All other colors pass through unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
3DFACE entities previously created one WireGpu buffer per entity,
resulting in N separate draw calls per frame. For files with large
triangle meshes this was the dominant GPU CPU overhead.
New pipeline:
- face3d.wgsl: simple flat-color vertex + fragment shader (MVP only,
no quad expansion, no pattern distance computation)
- Face3DGpu: batches ALL Face3D entities into a single TriangleList
buffer (6 vertices per face, per-vertex color) — 1 draw call
- WireGpu::from_batch: merges N Face3D edge wire models into one
quad-expanded buffer for edge rendering — 1 draw call
- split_face3d_wires: separates face3d from other wires at Primitive
build time via document handle lookup (O(N), once per epoch)
Hit-testing via WireModel (CPU) is unaffected — face3d wires remain
in entity_wires_arc() and hit_test_wires() as before.
Before: N 3DFACE → N draw calls, N × 96 B/vertex WireVertex
After: N 3DFACE → 2 draw calls (fill + edges), 28 B/vertex fill
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Block sub-entities with ByBlock color now inherit their INSERT's resolved
color instead of rendering as the default white. ByBlock linetype inherits
the INSERT's linetype pattern, and ByBlock lineweight inherits the INSERT's
effective line weight.
Implemented via render_style_for_block_sub(), called in tessellate_entity()
when expanding INSERT exploded entities.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Option I: add per-viewport Arc wire cache so paper-space viewport rendering
no longer re-tessellates model content every frame.
Option J: hit_test_wires() returns Arc<Vec<WireModel>> — O(1) pointer copy
in model space instead of a full Vec clone on every mouse move during commands.
paper_canvas_hatches/wipeouts() now route through the epoch caches added in F.
Option K: add world_snap_r + wire_in_range() pre-check to Snapper::snap().
All Endpoint/Midpoint/Nearest/Perpendicular/Intersection loops skip wires
whose chord sphere is outside the snap circle using O(1) scalar comparisons,
eliminating O(entities × vertices) matrix multiply cost when zoomed in.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add Arc<Vec<...>>-backed epoch caches for hatches, wipeouts, images, and
meshes — the same pattern used for wires. build_primitive() now returns
an O(1) Arc refcount bump on navigation frames instead of rebuilding
every collection from scratch.
Also wrap ImageModel.pixels in Arc<Vec<u8>> so cloning an ImageModel is
O(1) regardless of image resolution.
Navigation frames no longer copy pixel data, tessellated hatch boundaries,
or mesh geometry — all per-frame CPU work on unchanged geometry is now
eliminated.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Extract tessellate_one body into a Send-compatible free function
tessellate_entity, then drive it with rayon::into_par_iter() in
wires_for_block(). Spreads file-open and post-edit tessellation across
all CPU cores. Navigation frames are unaffected (Options A/B cache
eliminates per-frame tessellation entirely).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add two complementary render caches that make mouse navigation essentially
free regardless of file size:
Option A – Wire tessellation cache: entity_wires_arc() caches the
tessellated Vec<WireModel> keyed by geometry_epoch and returns an Arc,
so navigation frames (no preview wires) incur zero Vec clones and zero
tessellation work. Primitive::wires changed to Arc<Vec<WireModel>>.
Option B – GPU buffer cache: Pipeline stores cached_epoch; prepare()
skips all upload_wires/hatches/images/meshes calls when the epoch is
unchanged, writing only the 192-byte camera uniform instead.
geometry_epoch is a process-wide AtomicU64 incremented by every Scene
mutation (add/erase entity, selection, layer visibility, layout switch,
populate_*, grip, transform, copy, clear, preview wires). Using a global
counter rather than a per-scene counter prevents two tabs that happen to
have the same local bump count from sharing a cached_epoch value, which
was causing the first file's geometry to remain on screen after opening a
second file.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NAVVCUBE: propagate show_viewcube flag through ViewportPane and the wgpu
Primitive so the ViewCube pipeline skips upload/render when hidden.
UCSICON: bare command (no subcommand) now toggles current state instead
of printing usage info.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
prepare() was passing viewport.logical_size() (full window) to
viewcube.upload(), while hit_test/hover_id used the shader widget's
bounds. With the properties panel present the widget is narrower than
the full window, so the visual cube was scaled smaller but the click
area stayed full-size — causing the mismatch that grew toward the
bottom-left corner.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- paper_limits() falls back to A4 landscape (297×210mm) even when no
Layout object exists in the document
- paper_bg_color default changed to white [1,1,1,1] (paper surface color)
- PaperCanvas::draw() fills canvas with dark desk color first, then draws
the paper area rectangle in paper_bg_color so the sheet is clearly
visible against the desk background
- view.rs container background uses the fixed desk color instead of
paper_bg_color so it no longer conflicts with the paper-surface color
- BACKGROUND RESET for paper space now resets to white instead of dark gray
- Removed unused PaperSheet variant, paper_sheet() constructor,
build_paper_sheet_primitive() and associated match arms (dead code
after 2D canvas replacement)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When a paper-space viewport is activated (double-click / MSPACE command),
it is now rendered through its own dedicated PaperViewportPipeline rather
than the CPU-projection approach used for inactive viewports.
Architecture:
- PaperSheet widget (full-canvas): renders paper entities + CPU-projected
content of all viewports *except* the active one.
- PaperViewportPane widget (Fixed w×h, positioned at viewport screen rect):
renders the active viewport with a true 3D camera derived from the
viewport's view_direction/view_target/view_height.
PaperViewportPipeline is a newtype of Pipeline. Having a distinct type
gives it its own Iced storage entry (keyed by TypeId), preventing the
shared prepare() overwrite that broke the earlier per-viewport approach.
Changes:
- render.rs: PaperViewportPipeline, PaperViewportPrimitive newtypes;
build_active_viewport_primitive(); build_paper_sheet_primitive() now
excludes active_viewport from CPU projection.
- viewport_pane.rs: PaperViewportPane<'a> with shader::Program impl.
- mod.rs: viewport_content_wires() gains exclude_vp parameter;
viewport_screen_rect() is no longer dead code.
- view.rs: paper_canvas_view() overlays PaperViewportPane when MSPACE
is active.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Iced 0.14 batches all shader prepare() calls before any render() calls.
Multiple ViewportPane widgets sharing the same Pipeline type overwrite
each other's GPU buffers, causing the PaperSheet layer (full-canvas) to
render the last viewport's model content — appearing full-screen.
Fix: paper_canvas_view() now renders a single full-canvas PaperSheet
widget. build_paper_sheet_primitive() is updated to include model-space
content projected through each viewport's view matrix (via
viewport_content_wires()), restoring the original working behaviour.
ViewportPane::Paper mode and viewport_screen_rect() are kept with
#[allow(dead_code)] — a per-viewport wgpu sub-renderer that accumulates
data across frames could revive them in the future.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove Scene: shader::Program<Msg> impl; all GPU rendering now goes
through ViewportPane which supports three modes:
Model — full model-space view (unchanged behaviour)
PaperSheet — paper-space entities only, using the paper camera
Paper — model content through a specific viewport's own camera
- Add Scene helper methods (render.rs):
build_primitive / build_paper_sheet_primitive / build_viewport_primitive
update_viewcube_state / viewcube_mouse_interaction
- Add Scene helpers (mod.rs):
paper_sheet_wires() — paper entities without viewport projection
camera_for_viewport() — derive Camera from Viewport entity data
model_wires_for_viewport() — model wires filtered by per-viewport frozen layers
viewport_screen_rect() — paper-space → pixel rect mapping
- Add paper_canvas_view() in view.rs:
Stack of PaperSheet + one Paper widget per Viewport entity,
positioned with Space offsets from viewport_screen_rect()
- Update VIEWPORT_WIDGET_PLAN.md: mark Steps 1–4 done, document remaining work
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
MSAA and depth textures are now sized to the shader widget's clip
bounds instead of the full surface. The resolve writes to a matching
clip-sized intermediate texture; a blit pass (blit.wgsl, viewport
trick) then copies the result to the exact clip region of the surface
target, leaving all other widgets untouched.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All main render pipelines (wire, hatch, image, mesh) now use 4×
multisampling. Drawing passes render to a dedicated MSAA color buffer;
a final empty resolve pass transfers the anti-aliased result to the
iced surface target. The ViewCube renders post-resolve at 1× to avoid
pipeline incompatibility. Depth buffer also upgraded to 4× MSAA.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
