Saving to a path that already holds a drawing fails on Windows with
"could not verify <path> before saving: ... (os error 33)". Save As over any
existing drawing is affected; saving to a new path is not.
EditLease::acquire() opens the destination and takes the platform drawing
lock on it, then the save fingerprints the same path to check nothing changed
underneath. LockFileEx is mandatory and scoped to the handle that took it, so
that second open is refused against our own lock, lands in the non-NotFound
arm and aborts the save. flock on Unix is advisory and the second open
succeeds, so neither CI nor a Linux desktop sees it.
Read through the handle the lease already holds instead. A duplicate shares
the lock ownership, so the pre-replace re-check on the save worker can use
one too rather than re-opening the path.
The same collision reached the headless open op, which read a path this
session may hold leased: automation's save_then_open_round_trips fails on
main for that reason, one line after the save it no longer reaches.
A unitless block has no source length to convert from, so falling back to
MEASUREMENT gave it an inches or millimetres identity it never had and
scaled the reference on insert. The properties panel reported unit_factor
1.0 for the same insert.
Skip the conversion when either the block or the drawing is unitless.
Fixes#706.
Each ribbon panel was rendered five ways every frame so CollapsePanels could
roll back to any density at layout time: full, compact, button, tight and a
full-size flyout that duplicated the full rendering.
The layout pass ran four full measure-layouts per panel even in forced modes,
and the degradation decision was an untested u8 inline in Ribbon::view.
Now the choice is a pure, unit-tested decide_levels() whose levels are a typed
Level enum (Full/Compact/Collapsed/Tight). Panel carries its four renderings
as elements: [Element; 4] indexed by Level, with a slot(i, level) helper for
the tree stride. Forced modes (Full/Compact/Collapsed) measure nothing at all
and derive the row height from the placed panel. The open flyout draws the
panel's own `full` rendering inside a self-drawn box (identical weakest-bg +
1px neutral-border to the container it replaced), so no duplicate
render_group is built per panel per frame. Level, Panel, Widths, CollapsePanels
and decide_levels are pub(crate); CollapseMode stays pub (re-exported).
Tests (collapse.rs tests module, added RED first):
- forced_modes_pin_every_panel
- auto_huge_width_keeps_everything_full
- auto_degrades_from_the_right_one_panel_at_a_time
- auto_stops_degrading_once_the_row_fits
- auto_escalates_a_single_panel_past_collapsed_to_tight
- auto_cascade_drops_every_collapsed_panel_to_tight
- auto_runs_the_compact_phase_across_the_row_first
- no_panels_stays_empty
- single_panel_walks_the_whole_ladder
- zero_widths_never_overflow
- endless_row_degrades_everything_to_tight
- unbounded_row_keeps_everything_full
- nan_budget_degrades_both_phases_but_no_tight_cascade
- exact_fit_at_full_stays_full
- matches_the_pre_refactor_algorithm: byte-equivalence sweep against the
verbatim pre-refactor u8 algorithm (280 width/budget combos incl. the
degenerate 0/0/inf/NaN inputs), proving the decision logic is unchanged.
Measured with the committed #[ignore]d benchmark
(`cargo test --lib --release -- --ignored --nocapture bench_ribbon_view_construction`)
run as one instrument across pre-change / this change: Ribbon::view()
construction ~676 -> ~425 us/frame (~37% of view construction saved); forced
modes run 1 layout call per panel per frame instead of 5.
Verification: cargo build clean; cargo test --lib = 382 passed (367 baseline
+ 15 new ribbon tests) / 2 known pre-existing failures unchanged
(save_then_open_round_trips, tilted_ucs_places_planar_entities_with_the_plane_normal).
The ribbon kept its own \show_block_palette\ copy that the app had to
manually sync at every mutation point (the BLOCKPALETTE command and the
dock Close handler). Drop the copy and thread the app's authoritative
\show_block_palette\ into \Ribbon::view\ at render time, so the button
highlight can't drift from the panel's true visibility — those two
handlers are now mutate-points only and the ribbon view is the single
place that reads the state back.
The \\\x01attr\\x01…\ sentinel-prefixed string was used to tell geometry
fields (\&'static str\ names) apart from block attribute rows (runtime
tags) in \ctive_field\ and \dit_buf\. Replace it with a \FieldKey\
enum (\Geom(&'static str)\ / \Attr(String)\), so the two namespaces can't
collide by construction: \dit_buf\ is now \HashMap<FieldKey, String>\,
\ctive_field\ is \Option<FieldKey>\, and the sentinel decoding in
\ctive_key_id\ is replaced by \FieldKey::widget_id\.
While touching the key plumbing, replace \prop_field_key_for_id\'s
per-event scan of every section x prop (with a \String\ format per
candidate) with an O(1) precomputed \HashMap<iced::widget::Id, FieldKey>\
(\ ield_key_by_id\), built once in \
efresh_properties\ alongside the
sections — and rebuilt after \make_sections_read_only\ so rows demoted
to read-only stop mapping. \PropSyncActive\ now does a single map lookup
per event.
The global left-click listener fires PropPointerPressed on every mouse
press anywhere in the app, and the handler used to launch a full
widget-tree focus sweep on each one - even when the Properties panel
was closed. Gate the sweep on dock_panel_visible(Properties): when the
panel is hidden the handler now returns Task::none, turning an O(whole
UI) traversal per click into an O(1) boolean check in the common case.
The other sweep call sites already gate via sync_active_field_if_any;
this was the only ungated one.
Tests:
- hidden_properties_panel_skips_the_focus_sweep - a click with the
panel closed returns a Task::none (units == 0), i.e. no sweep.
- visible_properties_panel_runs_the_focus_sweep - a click with the
panel open still fires the sweep (units > 0), preserving the
select-whole-value behavior.
The Insert tab's Block Palette button now behaves like the View tab toggles
(UCS Icon, View Cube, Ortho, Properties, File Tabs, Layout Tabs): it stays
highlighted while the block palette panel is open and clears when closed.
The Ribbon gains a show_block_palette flag with a set_block_palette setter,
fed into ToggleState and mapped in is_active_tool for the BLOCKPALETTE tool
id. show_block_palette on the app remains the single source of truth; both
mutation paths now mirror it onto the ribbon:
- BLOCKPALETTE / BLOCKSPALETTE command toggles ribbon state alongside the
panel (src/app/commands/blocks.rs).
- Closing the panel via the dock rail close button clears the ribbon state,
matching how Close(Properties) already syncs (src/app/update/dialog.rs).
The drag preview divided the edge height by the raw panel count on the target
side. Closed panels keep their stack slot, so a hidden panel (e.g. the block
palette tucked away while Properties stays open) split the ghost and the drop
index as if it were rendering — leaving a half-height preview on that edge.
Size slots from the panels actually rendered on the edge instead, via a shared
visibility helper used by both the drop-index math and the ghost/edge-tint
geometry.
The dock drag preview computed slot heights and drop indices from the full
window height, but docked panel columns only span the model viewport, so the
preview overlay and insertion point drifted below the actual dock edge. Use the
current viewport height so the ghost and drop index line up with the panels.
Clicking an editable property value field now selects its entire value instead
of only placing the caret, so typing immediately replaces it. The click is
observed through a global left-press subscription (PropPointerPressed); a focus
sweep reports which widget took focus and PropSyncActive maps it back to the
active property row, then issues a select-all operation only when focus landed
on a different field.
The active row stays highlighted while its text input holds keyboard focus and
clears when focus moves elsewhere.
Creating a block from selected entities now bumps the geometry epoch, so the
block palette's per-update stale check notices the new definition and refreshes
its list in place instead of requiring the user to close and reopen the panel.
drop_index previously mapped a pointer position inside a lone full-height panel
to a top/bottom insertion split, offering an impossible drop. Clamp to the
single slot when the edge holds one panel, and cover the multi-slot mapping with
tests.
Style the dock rail tab by its panel state: the expanded (active) panel's tab
gets a primary-colored highlight and border, and a tab whose panel is being
dragged gets a lighter primary tint, so the user can see which panel owns the
edge at a glance.
- Run Plugin Manager release fetches on OS threads so they execute in
parallel instead of serialising on the async executor.
- Reduce V4Connection shutdown poll from 3s to 100ms; the runner is killed
and reaped without blocking host shutdown.
- Add PluginManager::remove and PluginProcess::shutdown_and_wait so
uninstall can stop the runner before deleting files, fixing Windows
access-denied errors on plugin removal.
- Rebuild ribbon immediately after uninstall so the tab disappears.
Hakan Seven