AnnoObjectScaleToggle had three silent no-op paths (no target, locked layer, unknown scale); each now pushes command-line info mirroring the open-path guards. Xref empty-state hardcoded grey now uses muted_style. DD_BOUNDS eviction and attr-clamp changes investigated and deliberately dropped (no reachable defect in either). Tests: anno_scale_toggle_tests cover all three paths (RED: silence). Full suite: 2032 passed / 0 failed / 25 ignored, zero warnings.
VP-freeze columns used the global-freeze glyph; shift-ranges swept filtered-out rows into bulk ops. Glyph swapped to layer_vp_freeze (ribbon precedent); new visible_indices helper shared by the view loop and the shift arm. Test: shift_select_skips_filtered_out_rows (RED: hidden row in range). Full suite: 2028 passed / 0 failed / 25 ignored.
props_asym_scale was app-global keyed by raw handle values, but fresh documents restart numbering at seed 1, leaking one tab's unchecked Uniform box into another tab reusing the value. The set moves to DocumentTab; all uses tab-scoped. Also removes a dead destructure left in overlay.rs. Test: asym_scale_opt_out_does_not_leak_across_tabs with handle-reuse premise assert (RED first). Full suite: 2025 passed / 0 failed / 25 ignored, zero warnings.
LayerPanel.editing and color_picker_row were positional indices, so a sort/sync/filter between start and commit retargeted renames and swatches. Both are Option<String> now; commit resolves fresh with graceful no-op on deleted layers. Existing rename tests migrated. Tests: layer_rename_commit_follows_name_across_resort (RED first) plus deleted/empty no-op and picker-resort pins. Full suite: 2019 passed / 0 failed / 25 ignored.
StyleKey::TableStyle only updated the ribbon mirror, so inserts kept using the header value and resync re-seeded from the mirror. The arm now writes current_table_style_name plus dirty when the style exists, and sync_ribbon_styles seeds from the document like Text/Dim. Tests: tablestyle_ribbon_pick_writes_header_and_dirties plus pick_flows_into_table_insert covering pick-to-dialog (both RED first). Full suite: 1996 passed / 0 failed / 25 ignored.
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Add Section 19 benchmarks covering camera pan viewport uniform updates,
spatial hover candidate search, and viewport data assembly scaling
- Add navigation telemetry probes in src/perf.rs (active only when
PERF=1) to track frame interval, batched input moves, and layout-draw gap
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
select takes window [x1, y1, x2, y2] in world XY, with crossing to also
take what the box crosses. It runs the viewport's own box test, now one
helper (box_selection_handles) that the drag and click-move-click
gestures share; the drag gesture applies the selection filter as the
click one already did.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LayerTransparencyEdit applied without begin/commit_layer_undo, so the edit was permanent while every sibling arm is undoable. Mirrors the color arm inside the non-empty guard. Test: layer_transparency_edit_pushes_undo asserts the entry plus undo-restores (RED first). Full suite: 1991 passed / 0 failed / 25 ignored.
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DsSetHandle for the first arrowhead also overwrote the second, destroying split-arrowhead configurations. The second write was a drive-by from overhaul 25515fa3; the Dimsah toggle has its own null-guarded init. Test: dimblk1_pick_leaves_dimblk2_alone pins per-end independence (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
It stamps sheet set data, which the web build does not have; the wasm
check failed once #1627 split it out of prepare_native_save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A point or pick step commits on the press, so the cursor drifting before
the button comes up no longer moves it. Selection steps and drag-fence
picks still wait for the release.
The press runs the existing release path once; the command path clears
left_down, so the real release that follows does nothing. This replaces
the PR's moved click block and press_consumed_point flag, which could
stay set when the release landed outside the viewport and swallow the
next release, and which broke TRIM's press-and-drag fence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dynamic-input fields take ' and " and read 2'9" / 3' as lengths (#937)
- STRETCH on a selection made by a crossing window stretches through that
window and goes straight to the base point (#1068)
- STRETCH's crossing-window steps show no coordinate boxes (#657)
- Collapsed ribbon panel titles wrap at words, never mid-word (#920)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MTEXT draws its stored text instead of re-evaluating fields on every
redraw. Fields update on their evaluation events as the reference does:
open (1), save (2, not autosave), plot (4) and REGEN/REGENALL (16), each
masked with the drawing's FIELDEVAL (variable dictionary, 0-31, with the
reference's prompt and message), and the new UPDATEFIELD command
(selection, attributes of selected block references, "N field(s)
found." / "N field(s) updated."). A Date field (on demand only) keeps
its value until UPDATEFIELD. The FIELDDISPLAY gray box now covers each
field's own glyphs, one box per line it spans, instead of the whole
text. Codec moved to the update_fields / field_spans revision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A plot stamps PlotDate fields, but the redraw only dropped the host's
own tessellation: an attribute is drawn by its INSERT and a host inside
a block definition by every reference to the block, so both still
showed the old value on screen and in the plotted output. The changed
hosts now redraw through their INSERT / the block's references (block
cache refreshed), without re-tessellating anything else. The codec is
patched to the field format code fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wizard's folder scan, Import Layout as Sheet, the template layout
lists and the drawing cache behind Model Views, Place on Sheet, callout /
label blocks and block previews parsed whole DWGs on the UI thread. They
now go through the shared `background_task` worker: a cache miss reads the
drawing and handles the message that needed it again. Block previews lend
the cached drawing to the preview scene instead of cloning it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A VIEW record's centre is an offset from its target in view coordinates.
Views saved by earlier versions stored the target itself as the centre;
treating that as an offset put them (and VIEW plots) at about twice the
coordinates. One shared `named_view_center` now resolves the centre in
f64 (DVec3/DQuat), taking a centre equal to a non-zero target as the old
convention; VIEW RESTORE, the view plot window and Place on Sheet use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Closes the view-to-dispatch resort race: the nine Layer* variants plus ColorPickTarget::Layer now carry the layer name and resolve to the current panel row at dispatch time via layer_panel_index; unknown names no-op. View sites (layer panel, ribbon dropdown) and the CLI/plugin path send names, so the CLI position lookup and the ribbon enumerate are deleted. Panel-internal selection state stays index-based. Tests: layer_toggle_visible_targets_layer_by_name_after_resort pins name targeting across a re-sort; layer_toggle_visible_unknown_name_is_noop pins the graceful no-op. Full suite: 1974 passed / 0 failed / 25 ignored.
Turning a 141k-entity layer off/on took 1.5-5 s; it now takes ~0.6-0.9 s.
- Off/freeze toggles go through invalidate_layer_visibility: entities on
the layer keep their tessellation memo (visibility gates them before
tessellation); only block users re-expand. No mesh recolor.
- The resident patch reuses a surviving memo entry instead of
re-tessellating, guarded by the same display-context hash as the full
build.
- The patch looked up `layout.order` linearly per re-shown entity, which
made turning a big layer back on quadratic.
- recolor_meshes_for_handles resolved materials for handles with no mesh.
- Wire arena: a hidden slab keeps its instances and sets a `hidden` flag
in its consts (collapsed in the vertex shader); an unchanged re-show only
clears the flag. Const writes are batched into merged spans.
- The `layer_visible` automation action indexed the document's layer
table instead of the sortable panel rows the Layer* messages use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- When the count area's boundary is gone the approved Invalid Area dialog
asks: undo the change (also its X and Cancel) or count all of model space;
"always" keeps the choice in the settings. An edited boundary moves the area.
- A table's *T block is brought up to date whenever the table changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model Views lists named model views and places them on the current sheet
(xref, viewport, paper-space named view, view label with navigation
fields, sheet view record); sheet view rows get Display, Rename & Renumber
View, Set category, Place Callout Block and Place View Label Block; the
View Category dialog's Add Blocks opens List of Blocks / Select Block; a
sheet whose relative path is gone shows missing; sheet set fields store
their values when a set changes; named views keep their centre relative to
the target. Codec pin moves to the revision with these field helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saving filled every 3D solid without stored wires with tessellated display
edges, so solids read from a file without a wireframe cache (for example a
DXF) were saved with edges OCS never created. Only solids without ACIS data
now get an edge cache on save; solids OCS creates or edits already get their
wires when they are built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import Layouts as Sheets shows the reference's statuses (already part of
a sheet set / may belong to another sheet set / available) and Browse
replaces the list; the Field dialog SheetView tree lists sheet views with
their properties, scale formats and hyperlinks; drawings open in tabs get
.dwl/.dwl2 lock files that other instances read as open; the codec pin
moves to the revision with sheet views and the default output folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- COUNTCOLOR / COUNTERRORCOLOR / COUNTSERVICE reject any other value with
the range message; COUNTTABLE ? lists in the reference order, padded,
22 lines a page with Press ENTER to continue:, then the totals.
- Target picks report N found / N found, M total; several objects (or one
that is not a block reference) count their copies, shown as Geometries
in the palette.
- Current area is the area in use (kept aside by Entire model space),
otherwise all of model space; an invalid Object boundary ends with the
reference message.
- Count colours reach solids and fills; the palette list and the count
are recomputed only when the drawing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Karim Jerbi