Selection: report what each pick found while a command gathers objects
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# src/locale_catalog.rs
-BLOCK, -WBLOCK, -BEDIT, ATTSYNC, BASE and INSBASE follow the reference
prompts and messages; empty blocks; WBLOCK keeps object coordinates and
stores INSBASE; annotative and hyperlink data on the block record; block
preview images; remembered dialog choices; block aliases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
Every pick during object selection prints the reference's count line:
"N found" for the first pick or a pick that adds nothing, "N found,
M total" after it, "N found, N removed, M total" when objects leave the
set. It is printed before a command's own filtering, so "N were filtered
out" follows it. COUNT reports through it and the ad hoc
"object(s) found." / "object(s) added to selection." lines are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picking nested objects reports what each pick added ("1 entity added",
"0 entities added" for an object already in the set), a pick on empty
space starts a window ("Specify opposite corner:"; a window dragged to
the right takes the objects inside it, to the left those it touches),
and a typed point picks the object it lies on. From the Reference Edit
dialog the item count is printed when the session opens, followed by
"Use REFCLOSE or the Refedit toolbar to end reference editing session."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selection of several unconnected chains, or one holding a closed
polyline, failed as a whole; each chain now joins on its own and the
rest stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Create a new named definition from current session edits, restore the source checkpoint, and continue editing the copy with fresh local history. Add the name dialog and Save dropdown, clone supported owned metadata onto independent handles, and refuse unsupported relationships atomically.
The right-edge toolbar of a REFEDIT session now shows the definition
being edited (REFEDITNAME) as an accent pill with the number of objects
in the working set, Add to / Remove from Working Set buttons with their
own icons (REFSET Add / Remove, straight to object selection), and
Save / Discard in a separate group below a rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
REFEDIT opens a dialog after the pick: the nesting chain as chips with a
preview of the chosen definition, all objects or picking them in the
drawing, attribute definitions (offered only when the definition has
them), locking objects outside the working set and unique names for an
external reference's named objects. The settings are remembered.
With unique names an xref's dependent layers, linetypes, text styles and
blocks are checked out as $N$NAME records of their own; without, under
the plain name, sharing a host record of that name. Save writes them back
under the reference's names, and the records made for the session are
removed when it closes. -REFEDIT uses the remembered settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
IMAGEADJUST (alias IAD) takes the selected raster images or asks
"Select image(s):", then opens a dialog with a before/after preview of
the first image and brightness, contrast and fade rows (bar plus
stepper, whole numbers 0-100). Apply writes the values to every chosen
image as one undo step; restore defaults sets 50/50/0. Adds the
image_adjust automation action and the image-adjust locale group.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In the Block Editor, BVSTATE makes a new visibility state, makes one
current, renames or deletes one; BVHIDE and BVSHOW hide or show the
picked objects in the current state (BVSHOW shows every object of the
block while they are picked). The first use makes the block dynamic.
The states are stored as the format keeps them: a
BLOCKVISIBILITYPARAMETER in the block's ACAD_ENHANCEDBLOCK evaluation
graph with its visibility grip and the grip's two location expressions,
the round-trip purge preventer, AcDbDynamicBlockTrueName /
AcDbDynamicBlockGUID / AcDbBlockRepETag on the definition and element
tags on each of its objects. The definition shows its first state; a
reference given another state gets its own evaluated *U copy, tagged
AcDbBlockRepBTag and linked back through AcDbBlockRepresentation /
AcDbRepData, so it shows that state and the other references do not
change. Saving the block drops erased objects from the states.
Checked: a block authored this way reads back with its states and
reference link from DWG and DXF, and the ODA converter accepts the DWG.
Closes#1566
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ARRAYEDIT picks an associative array (or takes the preselected one) and
its Source option opens the objects every item repeats in the Block
Editor; saving there updates all items at once. Counts and spacings stay
in Properties.
Refs #1109
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
COMPARE picks a drawing (or takes its path) and matches its objects with
this drawing's by what they draw: type, layer and tessellated geometry,
so an unchanged copy matches whatever its handle. Objects only here are
outlined in green, objects only in the other drawing in red, over the
current drawing, and Next / Previous zoom from one difference to the
next with a count in the prompt. A moved or edited object shows as one
of each. eXit (or Esc) clears the overlay.
Refs #970
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the new Associative option on (the default), ARRAYRECT and
ARRAYPOLAR build the array the way the drawing format stores one: the
selected objects move into an anonymous source block, an anonymous
array block holds one ByBlock reference to it per item, an INSERT of
the array block takes their place, and an AcDbAssocAction with an
AcDbAssocArrayActionBody, its three dependencies, the BaseNormal /
Origin / basePoint parameters and the value parameters tie them
together in the model-space network. The array is then edited from
Properties like an array read from a file.
The option flips with AS and is remembered for the session; on a
rotated working plane the commands keep making plain copies. Saving
drops the action of an array whose reference was erased or exploded.
Checked: created arrays reopen as associative with their parameters
and items, and the ODA converter reads the saved DWG without errors.
Refs #1109
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SLICE now takes MESH, polygon mesh and polyface mesh objects. A mesh
that closes a volume is sliced as a solid, so each side is capped and
becomes a 3D solid. An open mesh, such as a pipe run imported without
end caps, is clipped face by face and each side stays a mesh, open
along the cut. Keeping one side or both works as for solids, in one
undo step.
Refs #1398
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening the block editor brings up a Block Editor ribbon tab with
Edit / Save / Discard, Attribute Definition, and the geometric,
dimensional and parameter tools that drive parametric blocks. The tab
is only listed while a block editor session is open, and leaving the
session returns to the tab that was active before.
Refs #509
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ADJUST gathers raster images or PDF/DWF/DGN underlays (other objects are
dropped silently, pickfirst is used, a mixed set is refused), then asks the
image option (Brightness default) or the underlay option (last used), with
value prompts that offer the image's own value or the session's last
underlay fade/contrast, and Monochrome Yes/No. Invalid values re-prompt.
One undo step. -IMAGEADJUST, PDFADJUST, DWFADJUST and DGNADJUST take one
kind each. Raster image Brightness/Contrast/Fade move to an Image Adjust
section as whole numbers with 0-100 validation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HPASSOC (0 or 1, default 1) is the starting state of the hatch
command's associative option. It is an application setting: typed
directly or through SETVAR, it persists across sessions and does not
mark the drawing modified.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TXTEXP replaces each selected TEXT and MTEXT with one polyline per
glyph contour, on the text's layer and with its properties: a
lightweight polyline for flat text, a 3D polyline for tilted text.
The outlines come from the same glyph tessellation the text renders
with, so stroke fonts give their strokes and outline fonts their
closed contours.
Refs D#1665
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In model space MVSETUP draws the sheet border at the drawing scale
(scale factor, paper width and height) and zooms to it, or switches to
a layout. On a layout it creates viewports in a bounding area (a single
one, a 2x2 engineering set of top/front/right/isometric views, or an
array with spacing), deletes picked objects, and scales picked
viewports to a paper/model unit ratio.
A viewport's fit to the model now measures the model along the
viewport's own view direction, so side and isometric views frame it
too.
Refs #1501
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PASTESPEC offers the formats on the clipboard: Objects and Block for
objects copied in the application (the PASTECLIP and PASTEBLOCK paths),
and Text for the system clipboard's text, placed as multi-line text in
the current text style with its lines as paragraphs.
Refs #645
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DVIEW (alias DV) offers TWist and Undo. TWist rolls the active view
or viewport camera to the typed angle; Undo steps back through the
twists made in the session. The new alias reaches existing profiles
through the alias migration table.
Refs #638
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Delegate INSERT and MINSERT explosion to the document-aware codec implementation, removing duplicate attribute and base-point handling. Update workspace, kernel and graph pins together and cover rotated arrays with a nonzero base.
Enforce constant attribute flag in ATTEDIT dialog by presenting constant attributes as disabled and ignoring modifications. When exploding an insert, restore block-definition attribute definitions as transformed ATTDEF entities while dropping instance attribute values.
- A layout opens for the first time when its page setup was never
initialized (no paper size, no media name) or it was created in this
session; its page setup is initialized then, and with
LAYOUTCREATEVIEWPORT it gets its first viewport. A layout never opened
is saved with an uninitialized page setup and no viewports, so it gets
its viewport when the file is opened again, here or in the reference.
- Select Viewport for view: a viewport is selected when the pick box
(PICKBOX pixels at the sheet's zoom) touches its frame; a pick well
inside or outside selects nothing and the prompt repeats.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DIST printed the raw world angle (-180..180) while the Properties panel
and typed directions follow the drawing's base angle and direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Filleting a polyline segment with a line or arc moved the segment's
vertex and left the polyline closed and the other object separate, so a
closed shape bent into an unexpected outline. The polyline is now
opened if closed, cut at the fillet point keeping the picked side, and
the fillet arc and the trimmed line or arc are joined onto it as one
polyline, as the reference does.
Refs #1422
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TRIM already takes objects selected before the command as cutting
edges; EXTEND ignored them and extended to the nearest object in the
path. It now takes them as boundary edges the same way.
Fixes#1732
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pasted block is defined around the clipboard base, so its origin
is already that point, but the insertion still subtracted the base and
landed the block offset from the pick. The base now only positions the
world-space preview, and it stays f64.
Fixes#1731
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
