Share source buffers across block placements and render nested content with GPU instance transforms.\n\nChunk silhouettes and compact mesh material data so large drawings stay under device buffer limits and remain responsive.
The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A two-line angular dimension stores two lines, not two rays:
first_point→second_point is one, angle_vertex→definition_point the other,
and the angle is the one they make where they cross. The renderer read
angle_vertex as the centre and the other two points as the rays from it,
which measures something else entirely — a ten degree angle came out as
two hundred and seventy, and a shallow one as very nearly a full circle.
The lines are now intersected for the real vertex, and the arc point
picks which of the four angles at that crossing is meant. Each line
offers its direction and its reverse, and the sweep is tried from either
line: taking only the first→second order leaves out half the angles, and
the half left out is the one wanted whenever the lines are nearly
parallel. Parallel lines cross nowhere, so only the extension lines are
drawn.
A zero sweep was also being turned into a full turn, because the wrap
that pushes a negative sweep forwards ran on zero too. Two rays pointing
the same way enclose no angle and now draw none.
Checked against the three angular dimensions in a drawing that carries
its own baked arcs: the vertex and sweep computed from the stored line
endpoints reproduce the baked centre and angle to the decimal — 7.48,
10.61 and 2.29 degrees — from entirely separate inputs.
This is the path taken when a dimension has no baked block: one OCS drew
itself, or one whose block was dropped by an edit. Both paths now agree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Route model, paper, viewport and nested block content through one traversal while preserving leaf renderers. Carry decoded material state into mesh shading and harden solid geometry conversion.
Every angle row went through the linear formatter, so switching LUNITS
to Architectural showed a block's Rotation as feet-and-inches — and the
string wouldn't parse back, wedging the field until it was cleared and
retyped. Only the decimal/fractional LUNITS survived by accident.
New edit_angle row helper formats angles with format_angle
(AUNITS/AUPREC: decimal degrees, DMS, grads or radians), applied to all
17 angle rows (rotations, obliquing, arc start/end, hatch pattern
angle, multileader text rotation). parse_angle_deg converts every
AUNITS display form back to degrees ("30°"/"30d", DMS 30°15'20",
33.33g, 0.52r) and parse_f64 falls back to it, so the displayed value
round-trips through an edit.
Closes#297
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A 3ft object measuring 35.9999" (float noise) printed "2'-11 1"" because the
architectural and fractional formatters split feet/inches/fraction *before*
rounding. A fraction that rounded up to a full unit (16/16 -> 1/1) reduced to a
bare "1" and leaked out with no carry into the inches or feet.
Round on the fraction grid first using integer ticks, then decompose, so carries
propagate: 35.99" now reads 3'-0" instead of 2'-11 1". Adds regression tests.
Fixes#380
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "Dim line color" row on Leader and Dimension entities was
read-only: an earlier attempt wired it to Leader.override_color, which
acadrust never serialises, so the pick was lost on save. Store it
instead as a standard ACAD_DSTYLE per-object dimension-style override
(DXF code 176, an ACI index) through the existing dim_override codec,
so it round-trips through both DWG and DXF like the other dim
overrides. RGB picks collapse to the nearest ACI, matching the rest of
the dim-colour stack (dimension styles are index-only through the file
layer). The renderer prefers the override over the style's DIMCLRD.
The write branch is guarded to leaders and dimensions so a mixed
selection cannot stamp the override onto other entity types.
Bumps acadrust to c9fe982, which carries parsed XDATA onto dimensions
on DXF read (it was dropping common.extended_data), so the dimension
override persists on DXF save as well as DWG.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Completes the f64 migration on the CPU data path: the only f32 left now
is the GPU/render/screen layer, which is architecturally required (wgpu
vertex buffers and iced are f32; f64 vertices would double memory).
- EntityTransform::Rotate.angle_rad and Scale.factor are now f64 (the
transform was already applied in f64 around the DVec3 center, so this
only preserves the typed angle/factor). apply_standard_transform and
apply_standard_scale take f64.
- CmdResult::ExtrudeEntity.height and AlignSelected.{angle_rad,scale}
are f64; the EXTRUDE height parses as f64.
- defaults.rs (last-used construction values: circle radius/diameter,
rotate angle, scale factor, offset/fillet/chamfer distance, array
spacing/counts/angle) moved from Cell<f32> to Cell<f64>. Array counts
round-trip through u32 (exact below 2^53).
- Consumers in circle/array/fillet/offset/rotate/scale/align/solid3d and
dimension.rs rotate_point/scale_point follow. `as f32` is kept only
where a value feeds a WireModel rubber-band/ghost (the preview path is
screen-space f32).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ramox81