The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- resolve_point, set_polyline_vertex and the solver's point_for_marker
treat the marker one past the last vertex of a closed polyline as
vertex 0, the way line_segment already did. Equal (#1366), the axis
pre-alignment (#1365) and the transform pin (#1361) address a picked
segment's end that way, so on the closing segment they either refused
the pick or pinned nothing.
- Page-setup dictionary keys compare case-insensitively: page_setup_save
replaces "site" when "Site" exists instead of adding a second entry
(PSETUPIN counted it as replaced, #1344), delete and rename match the
same way, and a rename that only changes case is allowed.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- PSETUPIN / -PSETUPIN: with no arguments a file picker offers the chosen
drawing's named page setups in the Plot dialog; `PSETUPIN <file>` opens
the same chooser on that file; `PSETUPIN <file> *` or
`PSETUPIN <file> name,name` import straight away. Same-named setups are
replaced, the import is one undo step, and the report counts both.
- The Plot dialog's page-setup list gains "Import…": the chooser shows the
source drawing's setups with a tick each, All, Import and Cancel, and
selects the first imported setup afterwards. The source is read off the
UI thread with the same reader the editor uses for its own setups
(`scene::document_page_setups`), and handles that only meant something
in the source drawing (plot view, visual style) are dropped on import.
- Options → General → Plotting: "Show the page setup for new layouts"
opens the Plot / Page Setup dialog whenever a layout is created
(persisted with the plot preferences).
Tests: the document reader, the command (all / named / unknown / missing
file / undo) against a drawing saved by the app, the chooser flow, and the
new-layout option. Nine new strings in all 21 locales.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A drawing saved by a commercial CAD application (tests/fixtures/plot,
provided by Panos: one 10 m line, three layouts) corrects several
assumptions of the previous commit:
- rotation is relative to the medium's own orientation: an unchanged sheet
keeps the driver's exact medium (its PDF driver lists landscape media of
its own, written with rotation 0; a system printer's portrait A3 plotted
landscape carries 90); only a newly picked sheet is written as the
catalogue's portrait medium
- the stored scale factor (DXF 147) is the ratio × 25.4 on millimetre page
setups and the plain ratio on inch ones; the "use standard scale" bit
stays clear for standard and custom scales and is set for fit-to-paper;
a standard code is kept across a paper-unit conversion ("1:1" on an
inch page setup over a millimetre paper space is 1 in = 25.4 units)
- layout plots take the same scale path as every other area, so a foreign
layout's paper-space unit survives
- "plot with plot styles" / "display plot styles" round-trip as the
dialog's checkboxes, independent of a style table being named
- layout limits place the sheet at minus its displayed margins, the way the
source application does (the printable corner is the paper-space origin);
the margin ↔ rotation mapping shared by the printable-area guide now
turns the medium's top margin into the layout's left one at 90°
The fixture round-trips through the dialog with every stored field
unchanged; picking a new sheet on it writes the canonical form.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One writer (plot_settings_from_dialog) now serves both the layout's embedded
settings and named page setups, so the two can no longer drift apart:
- media are stored as the portrait sheet with the orientation in the
rotation code (0/90/180/270; upside-down adds a half turn) instead of
swapped width/height with rotation limited to 0/180
- standard scales are written by their code (1:1 … 100:1) with matching
numerator/denominator; other scales as a readable custom ratio in the
layout's own paper unit, converting from the drawing's scale-family unit
(a metre drawing plotting "1:100" stores 10 mm = 1 unit, an inch layout
stores 1 in = 2540 units); reading converts back and keeps a ratio the
scale list has no name for instead of snapping to 1:1
- the layout's paper unit and every flag the dialog does not edit survive a
round trip untouched; layout limits follow the paper-space unit
- new drawings, new layouts, CLEAR and the automation "new" op share one
default page setup (canonical A4 name, rotation 90, none_device, 1:1
layout plot) through Scene::reset_to_new_drawing
Scene gains scale_family_unit_mm, scale_ratio and a scale-name ratio parser
(ratios and architectural names). Round-trip tests cover orientation,
standard/custom/fit scales, unit conversion, named-setup parity, preserved
flags and the default layout.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Some DWGs written by other programs leave the root named-objects
dictionary unrecoverable: the header pointer names a non-dictionary and
the real NOD child dicts are owned by a table-control handle, so nothing
has owner==NULL. Navigating the root then silently no-ops, and
registering a new named-object entry (page setup, annotation scale, CTAB)
against the missing root orphans it — it never round-trips.
Add shared annotative::root_named_dict_handle(): resolve the header
pointer, else adopt the richest owner==NULL dict, else synthesise a fresh
root and write it back. Route ensure_plotsettings_dict, add_scale's
scalelist-create branch, and set_saved_active_layout through it. Resolve
the plot-settings dict via the PlotSettings owner when the header pointer
is stale, mirroring scalelist_dict_handle.
Verified page setups survive a DWG save/reload on the repro file with
layouts intact.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Restructure the plot dialog into a style-manager-style master/detail: a
left list of page setups plus a right settings editor. The list shows
<none> (defaults + PDF) and <previous> (the settings the dialog opened
with), then the drawing's layouts (*Model*, *Layout1*, …) and its
standalone named page setups.
- Named page setups live in the ACAD_PLOTSETTINGS dictionary
(src/scene/page_setup.rs: names/get/save/delete/rename, creating the
dictionary if absent); DWG round-trip verified.
- Toolbar New / Copy / Delete | Set current / Preview / Print. Selecting
a row loads it into the editor; Set current writes to the active
layout. Copy duplicates a layout or a setup into a new named setup;
Delete/Rename apply only to named setups.
- Scene::plot_settings_for(name) generalizes effective_plot_settings so
any layout's settings can be loaded; on open the settings are
snapshotted for <previous>.
- Default selection: model space → <none>; a layout → its own setup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
