Images, OLE frames, wipeouts, underlays, paper-space viewports and
drawing-view borders were selectable only on their outline. Each now
carries an interior pick surface (pick_tris over its rectangle, or the
triangulated clip polygon for a clipped underlay), ranked below edge
and fill hits so content drawn inside still wins the click. The
layout's own sheet ("overall") viewport is excluded — identified by
the Layout object's viewport link, since DWG files carry viewport
id = 0 and some center the sheet viewport off-origin — or it would
swallow every click over the real viewports beneath it. Drawing-view
borders draw nothing normally; they emit an invisible pick-only wire
whose rect outline appears while selected.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A raster image reference now resolves through one memoised path shared by
the loader and the unresolved-reference placeholder:
- http/https URLs are fetched natively (rustls, 8s timeout, 32MB cap); a
local file is read as before. The web build never fetches. The cache is
cleared when a new document opens.
- Online, the fetched image displays; offline or on a broken/missing
reference, the frame + saved path text still shows. One resolver keeps the
two in agreement without fetching twice.
The raster is also clipped to its boundary: the image draws as the
triangulated clip polygon (ear-clipped) with per-vertex UVs instead of a
full quad, so pixels appear only inside the clip. Clip-boundary Y is raster
space (top-down), so it is flipped to the image's Y-up space in both the
outline and the clip triangulation so they align.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
An IMAGE whose file can't be opened (a URL, or a missing/renamed file) now
draws its clip/frame outline plus the saved path as centred text in the
image colour — AutoCAD's broken-reference placeholder — instead of an empty
frame. OCS never fetches remote paths. Bumps acadrust so the entity's path
is populated from its ImageDefinition.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rewrite each entity's property builder to the per-entity group/row spec:
the correct sections (Geometry, Misc, Text, Pattern, Lines & Arrows, Leaders,
Block, …) with the spec's rows and real computed values — Diameter,
Circumference, Area, Delta X/Y/Z, Angle, Total angle, Arc length, Radius ratio,
etc. — plus apply routing for the editable rows.
Covers ~26 entities (Line, Circle, Arc, Point, Ellipse, Spline, polylines,
Ray/XLine, Insert, Text, MText, Hatch, Leader, MultiLeader, Tolerance, Solid,
Solid3D/Region/Body, meshes, MLine, Raster/Wipeout, Underlay, Table, Viewport,
Attribute, OLE). The 3D Visualization/Material group and the full Dimension
spec are deferred (they need document access for material/dimstyle name
resolution). Rows whose data is not in the pinned acadrust revision are shown
as empty placeholders, to be filled when the dependency is bumped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Groundwork for making the Properties panel conform to the per-entity group/row
spec (PROPERTIES.md). The panel already renders a Vec of sections, but each
entity could only express a single geometry section.
Change PropertyEditable::geometry_properties (and the EntityTypeOps enum
dispatch) to return Vec<PropSection>, update the two impl macros, and flatten
in properties_sectioned so the panel shows [General] + the entity's groups.
Every entity builder is wrapped to return its existing section as a one-element
Vec — pure mechanical change, no rows or titles altered, panel output identical.
Enables Phase 2: rewriting each entity's groups/rows to match the spec.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grip markers drew visibly offset from the entity on large-coordinate
(UTM-scale) drawings: every Grippable impl cast the f64 entity coordinates
to f32 BEFORE the world-offset subtraction, and at 1e7 magnitude an f32
holds ~0.9 drawing units of rounding error. The wires subtract the offset
in f64 first (precision-preserving), so the grips landed up to ~1 unit
away from the geometry they belong to.
GripDef.world is now DVec3: producers fill it straight from the f64
entity data, refresh_selected_grips subtracts the world offset in f64,
and only the small offset-local result is cast to f32 for screen-space
projection (grips_to_screen / find_hit_grip) and drag state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 1 of bringing the grip vocabulary in line with the standard
CAD convention: drop the per-position-type shape encoding (Diamond
for translate, Circle for parameter) and use a plain square for
every endpoint / vertex / centre grip. The behavioural midpoint vs
vertex distinction stays — it lives on `GripDef::is_midpoint` and
drives `Translate` vs `Absolute` in the grip-edit dispatcher — only
the marker shape collapses.
- `GripShape` keeps `Square`, `Rectangle`, `Triangle`. Diamond /
Circle are gone.
- `GripDef` gains `dir: Option<[f32; 2]>` — a world-XY direction
vector consumed by `Rectangle` to orient the box along its
segment.
- `entities::common` exposes `square_grip`, `center_grip` (same
square marker, flagged as translate), `rectangle_grip(id, world,
dir)` for oriented mid-segment handles, and a kept-for-Phase-2
`triangle_grip`.
- `overlay::GripMarker` / `grips_to_screen[_paper]` thread `dir`
through to the canvas painter; the Rectangle path rotates the
box around the grip centre using the world-XY direction (flipping
the sin for screen-Y).
Every existing `diamond_grip(id, w)` call becomes `center_grip(id,
w)` — the visual change is square-replacing-diamond at line
midpoints / arc midpoints / circle centres / ellipse centres /
viewport / hatch loop centroids / dimension grips / image corners /
multileader / ray / underlay / ole2frame / solid3d.
`LwPolyline` grows a stretch handle on every segment (straight or
arc), drawn as the new oriented rectangle. The grip-edit path
translates both segment endpoints for straight segments and
adjusts the arc bulge from the new midpoint for arc segments.
acadrust's DWG reader read the wipeout/raster-image clip boundary
points only to advance the bit cursor and then discarded them, so every
wipeout fell back to `Wipeout::new()`'s default placeholder rectangle
(`-0.5..0.5`). For files that store the real polygon mask in clip
vertices (anteen.dwg's `DIMBLOCK` style: u_vector ≈ 643k, size = (1, 1),
clip polygon ~0.0016×0.0033 in pixel space), the wipeout rendered at the
full image bbox — hundreds of thousands of units wide — instead of the
intended ~1000×2000 mask.
Pinned to the new `fix/wipeout-clip-vertices` acadrust branch (carries
the upstream parser fix). On the H7CAD side, the polygon mapping now
follows the DXF convention:
x_off = (clip.x + size.x/2) × u_vec
y_off = (size.y/2 − clip.y) × v_vec (image-Y points down)
…in `wipeout_boundary_2d` (fill), `Wipeout::to_truck` (border line),
and `Wipeout::grips` (vertex handles) so all three stay in sync. The
fill path also explicitly closes the polygon loop — without it the GPU
`in_polygon` ray-cast skipped the v(n-1)→v(0) edge and the solid mask
bled far past the boundary.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Entity converters were casting WCS coordinates to f32 before the renderer
subtracted world_offset, which destroyed sub-unit precision on drawings
sitting at large coordinates (typical UTM-style CAD files). The multileader
case made it visible — glyphs warped under rotation — but every entity
that emits TruckObject::Lines/SegmentedLines/key_vertices/fill_tris was
affected.
Type changes (in src/scene/acad_to_truck.rs):
- TruckObject::Lines / SegmentedLines: Vec<[f32; 3]> → Vec<[f64; 3]>
- TruckEntity::key_vertices / fill_tris: f32 → f64
All ~17 producer files updated to keep WCS coordinates in f64 right up to
the TruckEntity boundary. The consumer in scene/tessellate.rs now performs
`(x - ox) as f32` (f64 subtract, then cast) for points, key_vertices, and
fill_tris — preserving precision near the camera origin even when the
drawing sits at million-unit coordinates.
catmull_rom_pts (multileader spline) is now f64; the scene path widens its
offset-relative f32 ctrl points to f64 around the call and narrows back at
the output.
Notes:
- Table layout still uses glam::Vec3 (f32) internally; widened to f64 only
at the TruckEntity boundary for type compatibility. Separate cleanup to
switch its internal math to f64 is tracked.
- snap_pts and tangent_geoms remain f32 — they are UI feedback (snap
candidates, tangent hints) and the precision is sufficient there.
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
- raster_image.rs: RasterImage renders as border rectangle + X diagonals
(pixel placeholder); Wipeout renders border or polygon clip boundary;
both support insertion_point grip, brightness/contrast/fade properties,
clipping toggle, and mirror transform (u/v vectors reflected)
- attribute.rs: AttributeDefinition renders default_value (or [TAG] if
empty) as font-tessellated text; AttributeEntity renders the live value;
both support insertion grip, position/height/rotation properties,
and transform operations
- mod.rs + traits.rs: wire up all four new entity types through the full
dispatch chain (to_truck, grips, geometry_properties, apply_geom_prop,
apply_grip, apply_transform)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
