Typed values were quantized to the f32 grid before reaching the
entity (e.g. a length of 2000.8 committed as 2000.8020), worsening
with magnitude. The interaction point layer was all glam::Vec3 (f32).
Two-layer fix:
1. Coordinate backbone -> f64. last_point, last_cursor_world,
dyn_anchor, dyn_ref become DVec3; UcsXform transforms, parse_coord,
the ucs helper fns, dyn_resolve_point, the OTRACK typed-distance
paths, command-line coordinate entry and the coordinate readout all
compute in f64. Screen/GPU/alignment stays f32 (snap engine, render
geometry, projection, UCS-icon/viewcube drawing) with casts only at
those boundaries.
2. Per-command committed storage -> DVec3. on_point already received a
DVec3, but many command impls narrowed it back to f32 (let pt =
pt.as_vec3(); Vec<Vec3> fields) and re-widened at build, quantizing
the committed coordinate. Migrated PLINE, SPLINE, MLINE, LENGTHEN,
INSERT, 3D primitives, every dimension/leader/mleader, ray, revcloud,
wipeout, attdef, table, tolerance, array center, mview, plot_window,
plus the QDIM_PLACE handler and qdim_collect_points. Preview,
hit-test and rubber-band paths keep f32 at the boundary.
Hatch manual boundaries are left for a follow-up: HatchModel.boundary
is structurally Arc<Vec<[f32;2]>> and needs a model-level widen.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
COPYCLIP/CUTCLIP used the mean of each entity's bounding-box centre as the
paste anchor. Standard clipboard behaviour puts the lower-left corner of the
box enclosing all copied items under the cursor. Union each entity's bbox min
corner instead, and rename clipboard_centroid -> clipboard_base (COPYBASE also
stores a picked point there, so "centroid" was inaccurate).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
on_enter/on_escape returned CmdResult::CommitEntity, which commits the
spline but keeps the command armed with its accumulated points — the
cursor stayed in spline mode and the next click began a new spline,
trapping the user in the command loop. Return CommitAndExit so Enter/Esc
finalize the spline and return to the selection state.
The in-progress preview drew only the straight control polygon. Sample
the actual degree-3 clamped B-spline (same control points + knot vector
build() commits) so the rubber-band traces the exact final curve.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Continue option committed a single tangent-continuing arc and left
the command. Now each picked end point commits its arc and re-anchors at
that arc's free end, so the user keeps drawing tangent-continuing arcs
until ending the run with Enter/Esc. A degenerate (collinear) pick stays
active instead of cancelling.
Because arcs now commit via CmdResult::CommitEntity (repeating) rather
than CommitAndExit, advance the ARC_CONT continuation anchor in the
CommitEntity arm too — guarded to line/arc so non-continuable repeats
(point/ray/spline) leave it untouched. This also lets a LINE run feed a
following ARC Continue.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Run QUICKPRINT (or QP), select objects, then Enter: the selection's
bounding box becomes the plot window and a PDF is written next to the
drawing (<name>_<timestamp>.pdf) using the active page setup, with no
dialog. Model space.
Implemented as a selection-gathering CadCommand (src/modules/view/
quick_print.rs) returning CmdResult::QuickPrint(handles); the host
(on_quick_print_handles) unions the picked entities' AABBs, sets the
plot window, and reuses the tested clipped window-export path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Arc ribbon default + icon + dropdown order set to 3-Point. New ARC_CONT: tangent-continuing arc from the last line/arc endpoint, pick end only; Ctrl flips direction. Exit anchor recorded on commit (disambiguated by last pick) so chaining continues from the correct end.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Copying and pasting a whole drawing froze the app. Three synchronous,
main-thread hot spots scaled with the full document rather than the
selection:
- Copy centroid did a linear document scan per selected handle
(wire_models_for / mirror_preview_parts), making copy O(H*N). Use the
document's O(1) handle index instead.
- The paste ghost translated every point of every clipboard wire on each
mouse move — O(points) per frame, which stalls placement of a huge
selection. Above a point budget, rubber-band a single bounding-box
outline instead (O(1) per frame).
- finalize_paste re-tessellated every solid in the document on each
paste. add_entity already tessellates pasted solids, so switch to the
incremental populate_missing_meshes_from_document.
OCS renders a dimension live from its definition points but exports a
baked *D block that other applications draw. An in-place edit (DIMTEDIT,
text override, DIMSPACE, any ReplaceEntity/ReplaceMany edit) changed the
dimension while leaving the old block, so the export kept the pre-edit
graphics — BricsCAD/ODA showed the stale dimension while OCS showed the
edit.
Add explode::invalidate_dim_block, which drops a dimension's baked *D
block (record + owned sub-entities, so no orphan blocks accumulate) and
clears block_name; bake_dimension_blocks then rebuilds a fresh block on
the next save. Call it from the in-place edit paths. The transform path
(MOVE/COPY/PASTE) keeps its own block in sync and is left untouched, so
dimensions loaded from other applications and not edited are preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Copy-paste (CTRL+C / CTRL+V) dropped dimensions. A dimension draws from
its baked *D block, whose geometry is in absolute WCS coordinates, and
the clipboard paste path added the dimension entity but never gave it its
own transformed block — unlike the in-drawing COPY, which does (#161). So
the pasted dimension kept pointing at the source block and rendered at
the original location instead of the paste point (same drawing), or had
no block at all (cross-drawing).
Capture each copied dimension's *D block into the clipboard, and on paste
build a fresh transformed copy of it and re-point the dimension's
block_name — for same- and cross-drawing pastes alike. Factored the
block-building out of clone_transformed_block into a shared
define_transformed_block, and the block snapshotting out of
capture_blocks into snapshot_block.
Pick a rectangular window in model space with the existing PLOTWINDOW command (now enabled in model space, previously paper-space only) and export it to a PDF at a chosen ISO paper size (A4-A0), orientation and scale (fit or ratio). The window is a hard clip boundary. Adds paper-size presets, a window-to-sheet transform, scale + clip support in the PDF exporter, and Page Setup controls (format/orientation/pick window).
Inserting a block piled every attribute at the origin: each AttributeEntity
was built from just tag + value with default geometry. Carry the full
AttributeDefinition through the attreq flow and build attributes with
AttributeEntity::from_definition, then apply the block's insertion transform
so each lands in WCS at its proper position / alignment / rotation.
Attributes are stored in world space, so moving the block must move them
too. The MOVE command already did (acadrust translate_insert); apply_grip
(grip-drag) and the Position X/Y/Z property edit now translate the
attributes by the same world delta so they no longer stay behind.
Rotate/scale/mirror of a block still don't carry the attributes — acadrust's
transform_insert has no attribute pass — tracked separately.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two follow-ups to ADDSELECTED:
- It no longer permanently changes the current layer/colour/linetype/
lineweight. The template's properties are captured as the drawing
defaults only while the launched draw command runs; a snapshot taken in
cmd_add_selected is restored the moment that command ends (central hook
in apply_cmd_result) or is interrupted by another command.
- Dimensions are supported: add_selected_verb maps each DimensionType to
its DIM* command, and the template's dimension style is adopted as the
current DIMSTYLE (restored afterwards). commit_entity_handle now stamps
every new dimension with the current DIMSTYLE — the DIM commands left the
default "Standard" on the entity, so a normal dimension also picks up
the active style now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Color/linetype/lineweight/layer are baked into the cached wire geometry
at tessellation time, so a property edit only repaints if the handler
bumps the geometry epoch. The color path did; several siblings only set
tabs.dirty (a save flag) and never re-tessellated, leaving the viewport
showing the stale look.
Route every handle-based edit through invalidate_property_targets
(mark dirty + recolor meshes + bump geometry), and full-bump the
name-based LAYER COLOR change:
- ribbon layer / linetype / lineweight dropdowns applied to a selection
- CHPROP (color/linetype/ltscale/transparency/layer)
- LAYMATCH (MatchEntityLayer)
- LAYER COLOR <name> <aci>
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Layer color/linetype/lineweight and MATCHPROP edits set the
document dirty flag but never bumped geometry_epoch. The wire
caches key on that epoch and bake a ByLayer entity's resolved
color at tessellation time, so they returned stale wires until
a new entity forced a rebuild. Bump geometry on those four
handlers so the edit repaints immediately.
Also remove REGEN/REGENALL/REDRAW/REDRWALL: the GPU raster
pipeline keeps the display continuously in sync, so on-demand
regen/redraw is a no-op concept in OCS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Editing tools (MOVE, COPY, STRETCH, ROTATE, OFFSET, SCALE, MIRROR) and
other interactive commands left their working set selected after they
finished, so the next edit silently reused it — confusing especially for
copy-producing tools. Drop the selection centrally in apply_cmd_result
when a command ends (active_cmd Some->None), excepting Relaunch/Dispatch
which hand a deliberate selection to a chained command. Pure-selection
commands run without an active command, so their result is preserved.
Closes#207
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Batch 4 of the dimension audit (command features).
- QDIM now works: the relaunched QDIM_PLACE stage decomposes the selected
geometry into endpoints, picks the axis from their spread (not Z), and
builds a continuous chain of linear dimensions at the picked line. Was a
no-op that errored with 'Unknown command'. (DIM-007/008/032)
- DIMSPACE steps parallel dimensions along the in-plane perpendicular
instead of Z (which never moved the dim line). (DIM-021)
- DIMBREAK / DIMJOGLINE no longer report success while doing nothing — they
state honestly that they are not yet implemented (need a break-gap / jog
field on the dimension model). (DIM-019/020)
Refs #181.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Group the flat src/ui/ dir: move the 9 style editors into ui/style/
(dimstyle, mleaderstyle, mlstyle, plotstyle, textstyle, tablestyle,
point_style, style_list, style_manager) and the 6 popups into
ui/popup/ (cycle, isolate, scale, selection_filter, snap, units).
Call sites repointed to crate::ui::style::/crate::ui::popup::; no
compat re-exports. ui/ root drops from 36 to 21 files.
- Rename app/cmd_result.rs -> app/command_driver.rs: the file is the
StepInput->feed_command driver, not the CmdResult type (which lives
in command.rs). Name now matches contents.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
