Drawings arrive from elsewhere carrying someone else's layer names, and
folding them into a set of house layers meant renaming and merging by
hand, one layer at a time.
LAYTRANS reads a layer set out of another drawing and moves this one onto
it. Given a file it maps every name the two already share and translates
at once, which is all most incoming drawings need. Bare, it opens a
translator: the drawing's layers on one side, the loaded set on the
other, mappings built up between them and applied only on Translate, so a
mapping can be reconsidered and the whole translation is a single undo
step. Mappings can be saved and read back, objects can be forced to
ByLayer so the target layer's properties are what actually shows, and the
result can be written out as a log.
The move itself is the one LAYMRG already made for a single pair, so
LAYMRG now goes through it too rather than keeping its own copy.
Three things fell out for free or nearly so. A standards file is a
drawing, so .dws and .dwt need nothing but a place in the file filter.
The entity list is flat and holds block definitions, so objects inside
blocks travel with everything else instead of being stranded on a layer
that no longer exists. And a target layer that this drawing already has
is left alone: the drawing has an opinion about it, and restyling it
would reach past what was asked for -- only newly created targets take
the standard's properties.
Mappings are saved beside the drawing rather than inside a DWS. That is
where AutoCAD keeps them, but putting them there would mean inventing a
place in the drawing that nothing else reads back.
Closes#624
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Add a searchable block palette with previews, file import, collision-safe nested definitions, and dependency/table-record import. Keep palette thumbnails current across drawing switches and block-definition edits.
Keep OFFSET picks current across newly created entities and preserve the command after pick-first offsets.
Use palette-provided contrast colors for active status controls and Alias Editor removal buttons.
Refs #653
Refs #658
Refs #659
Embed debug locales and expand the WebAssembly stack so modal construction remains responsive. Keep the Options scrollbar in its own lane and refine Turkish CAD terminology.
- unify Model and Paper Space plot area behavior
- add CTB discovery, read/write, and bundled defaults
- apply scale, render mode, and output options consistently
Pin Iced 0.15 so dialogs can measure content before distributing the resolved frame across child panels. Keep the web plugin notice compact and non-resizable.\n\nCloses #582
Use the operating system trust store and Windows proxy settings while keeping TLS verification enabled. Add retryable registry errors with copyable diagnostics.\n\nRefs #563
The ribbon layer dropdown gets a live search field above the list
(cleared when the dropdown closes, panel height tracks the filtered
count), and the Layer Manager toolbar gets one too. Both filter by
case-insensitive substring while toggle/rename messages keep the
original row indices, so acting on a filtered row hits the right layer.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A thin divider after the Name header resizes the column by drag
(60-640 px, session-persistent), riding the shared modal drag flow.
The name elide budget follows the column width, so widening the
column reveals long layer names; the hover tooltip stays for overflow.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
App preferences were spread across six flat plain-text files (settings.txt,
recent.txt, recent_limit.txt, statusbar.txt, ribbon.txt, plot.txt), each with a
bespoke line parser and no grouping. Replace them with a single grouped JSON,
serialized via serde (enabling the derive feature; serde_json was already a
dependency).
- New app/config.rs: AppConfig { settings, recent, statusbar, ribbon, plot } →
<config>/settings.json (pretty JSON), load()/save().
- Make UserSettings, StatusBarConfig/StatusPill, CollapseMode and
PlotDialogState serde-derived; #[serde(skip)] marks the plot dialog's runtime
fields so only print preferences persist. Their bespoke .txt load/save is
removed.
- App gains current_config/apply_config/save_config: one AppConfig::load at
startup distributes into live state; every settings-change site
(persist_settings_if_changed, recent add/remove/limit, status-bar pill
toggle, ribbon density, plot commit) routes through save_config, which diffs
against the last write to avoid thrashing.
- Clean start: the old flat files are ignored (no migration). ocad.pgp stays a
separate hand-editable file.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Restructure the plot dialog into a style-manager-style master/detail: a
left list of page setups plus a right settings editor. The list shows
<none> (defaults + PDF) and <previous> (the settings the dialog opened
with), then the drawing's layouts (*Model*, *Layout1*, …) and its
standalone named page setups.
- Named page setups live in the ACAD_PLOTSETTINGS dictionary
(src/scene/page_setup.rs: names/get/save/delete/rename, creating the
dictionary if absent); DWG round-trip verified.
- Toolbar New / Copy / Delete | Set current / Preview / Print. Selecting
a row loads it into the editor; Set current writes to the active
layout. Copy duplicates a layout or a setup into a new named setup;
Delete/Rename apply only to named setups.
- Scene::plot_settings_for(name) generalizes effective_plot_settings so
any layout's settings can be loaded; on open the settings are
snapshotted for <previous>.
- Default selection: model space → <none>; a layout → its own setup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pick a rectangular window in model space with the existing PLOTWINDOW command (now enabled in model space, previously paper-space only) and export it to a PDF at a chosen ISO paper size (A4-A0), orientation and scale (fit or ratio). The window is a hard clip boundary. Adds paper-size presets, a window-to-sheet transform, scale + clip support in the PDF exporter, and Page Setup controls (format/orientation/pick window).
The Layer Manager table and the ribbon's quick layer dropdown both
showed layers in document (insertion) order. Default the panel sort to
Name so both list layers alphabetically; a header click still re-sorts
by any other column. `apply_sort` reorders the panel's layer vector in
place, which the ribbon dropdown reads, so one default covers both.
With alphabetical ordering a freshly created layer can land anywhere in
a long list, so give the table scrollable an id and scroll its row into
view after creation, keeping the rename prompt visible.
Closes#270, closes#271
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Layer Manager only allowed one layer at a time. Now:
- Ctrl/Cmd-click toggles a layer in the selection; Shift-click selects
the range from the anchor; a plain click selects just one.
- Colour, linetype and lineweight changes apply to every selected layer.
- Delete removes all selected layers at once (reusing the #237 non-empty
warning, now pluralised); layer "0" and the current layer are skipped.
Selection is stored as row indices but re-resolved by name across sorts
and layer-table rebuilds, so it never points at the wrong rows. Modifier
state is tracked via a new SetModifiers message (shift + ctrl/cmd).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grow the attribute editor into a three-tab enhanced editor:
- Attribute: the tag/prompt/value list; click a row to select it, edit
its value below.
- Text Options: the selected attribute's Text Style, Justification,
Height, Rotation, Width Factor, Oblique Angle, Backwards, Upside down.
- Properties: the selected attribute's Layer, Linetype, Color,
Lineweight (the colour list also surfaces a non-standard current
colour so it displays and round-trips).
Applying writes value, text-formatting and common-property edits back to
each attribute positionally (guarded on block name + count), with undo
and a repaint. OK/Cancel are replaced by a single Apply button in a top
toolbar that commits but keeps the dialog open, matching the other modal
windows — the frame ✕ closes and discards un-applied edits. The frame
adopts the shared style-window palette, tab styling and sizing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Each row in the attribute editor now shows the attribute's prompt — the
text defined on the block's ATTDEF — falling back to the tag when the
block defines no prompt. The prompt is read from the block definition,
since attribute instances carry only tag + value.
Bumps the acadrust pin to pull the matching reader fix: its DWG object
reader was discarding the ATTDEF prompt, so every prompt came back empty.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
