Commit Graph
170 Commits
Author SHA1 Message Date
ramox81andClaude Opus 5.5 331772eac2 PCEXTRACTSECTION: Extract Section Lines dialog
Picking the cloud opens the Extract Section Lines from Point Cloud
dialog with the reference's settings and defaults: entire cross section
or perimeter only, maximum points to process (slider and field, with
the estimated time), output layer (Use Current or a layer), colour,
lines or 2D polylines with their width, minimum line length and connect
lines tolerance (each measurable by two points on screen), collinear
angle tolerance (0-10) and Preview result. Create extracts; with the
preview it asks [Accept/Settings/Undo] and Settings reopens the dialog.
The settings are kept for the session. Automation action pc_section.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 15:50:22 +03:00
ramox81andClaude Opus 5.5 2eaae1ecab Point clouds: POINTCLOUDCOLORMAP dialog, out-of-range colouring
POINTCLOUDCOLORMAP asks for a cloud (or None for the drawing's default
schemes) and opens the Point Cloud Color Map dialog: intensity and
elevation tabs with the scheme list, New / Delete / Rename, number of
colours (2-25, resampled along the scheme), blend between the ends,
reverse, gradient or bands, the colorized range, the out-of-range
choice and, for elevation, the cloud's extents or a fixed range with its
band height. OK / Apply write the drawing's colour map (created under
ACAD_POINTCLOUD_COLORMAP_DICT when missing) and the cloud's colouring in
one undo step; Make stylization current sets the tab's stylization.
Values outside a scheme's range take the end colours, the scan colours
or are hidden. Automation action pc_colormap edits the dialog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 13:10:45 +03:00
ramox81andClaude Opus 5.5 c2d9ac5ae2 Point clouds: attach dialog, crop toolbar, stylize, palette rows
POINTCLOUDATTACH opens the Attach Point Cloud dialog after the file is
chosen; its Attach button lives in the Attach Underlay list instead of a
separate Insert panel. A selected cloud brings the crop tools to the
right-edge toolbar. POINTCLOUDSTYLIZE sets the stylization with the
reference's prompts, the External References palette lists point clouds
(unload, reload, detach, path), and definitions keep the header extents.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 10:14:44 +03:00
ramox81andClaude Opus 5.5 5b6cbff5b2 Attach Underlay ribbon menu, DWF/DGN attach dialog, DGN true colours
- Insert > Reference: the PDF Attach button becomes an Attach Underlay menu
  (PDF / DWF / DGN); its face runs the last one chosen.
- DWFATTACH, DGNATTACH and ATTACH on a .dwf/.dwfx/.dgn open the Attach
  dialog for that kind: sheets or models with thumbnails (one chosen),
  placement, path type, file details with the sheet / model size, and for
  DGN the conversion units (sub units offer 1 / sub units per master as the
  scale).
- DGN V8 true colours come from the ExtendedColors record packed in the
  non-model attributes stream; the colour word's high part numbers them.
- A DGN model's extent includes each text's box (its length along the
  baseline and 1.5 x its height), as the reference sizes a model.
- DWFx text uses the family named in its embedded (deobfuscated) font.
- DWF contrast pivots at 0.73 once colours are turned over for a dark
  background.
- Hairline strokes are drawn solid one pixel wide, and underlay rasters are
  made at or below their size on screen so those lines stay unbroken.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-28 17:08:06 +03:00
ramox81andClaude Opus 5.5 913c845f5b PDF dialogs: own look with cards, segmented choices and chips
Attach PDF Underlay, Underlay Layers, PDF Import Settings and Import PDF
are laid out with rounded cards and accent titles, segmented controls for
path type, import layers and rotation, toggle chips for the on-screen
choices and import options, a page preview with previous/next for Import
PDF, always-visible file details, and a footer with help on the left and
the named action (Attach, Apply, Save, Import) on the right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-25 13:13:32 +03:00
Hakan SevenandClaude Opus 5.5 f537aff75c feat: node graph overlay; move to opencadcodec/opencadkernel/opencadgraph
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.

A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-25 07:34:23 +03:00
Hakan Seven 2e60c4da1b Merge pull request #1472 from ramox81:codex/pdf-attach-parity 2026-09-24 23:24:43 +03:00
ramox81 c1ecb0edaf Merge remote-tracking branch 'origin/main' into codex/pdf-attach-parity
# Conflicts:
#	locales/ar-SA/opencadstudio.ftl
#	locales/bg-BG/opencadstudio.ftl
#	locales/cs-CZ/opencadstudio.ftl
#	locales/de-DE/opencadstudio.ftl
#	locales/el-GR/opencadstudio.ftl
#	locales/en-US/opencadstudio.ftl
#	locales/es-ES/opencadstudio.ftl
#	locales/fi-FI/opencadstudio.ftl
#	locales/fr-FR/opencadstudio.ftl
#	locales/hi-IN/opencadstudio.ftl
#	locales/hu-HU/opencadstudio.ftl
#	locales/it-IT/opencadstudio.ftl
#	locales/ja-JP/opencadstudio.ftl
#	locales/ko-KR/opencadstudio.ftl
#	locales/nl-NL/opencadstudio.ftl
#	locales/pl-PL/opencadstudio.ftl
#	locales/pt-BR/opencadstudio.ftl
#	locales/ru-RU/opencadstudio.ftl
#	locales/tr-TR/opencadstudio.ftl
#	locales/zh-CN/opencadstudio.ftl
#	locales/zh-TW/opencadstudio.ftl
#	src/app/control/actions.rs
#	src/app/mod.rs
#	src/app/update/mod.rs
#	src/app/view/modal.rs
#	src/io/xref.rs
#	src/ui/window/mod.rs
2026-09-24 19:38:48 +03:00
Karim Jerbi 6b37476687 feat(ui): migrate dialogs across application to shared dialog_button and form_radio builders 2026-09-24 17:33:45 +01:00
Karim Jerbi 1a6279e841 feat(blocks): implement WBLOCK dialog and unify dialog buttons and radio builders 2026-09-24 16:44:24 +01:00
ramox81andClaude Opus 5.5 3f6bdf8c59 PDF underlays: attach dialog with pages, underlay tab, layers, import settings and file import, unload on the definition
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 18:31:40 +03:00
Hakan Seven 1988424638 Merge pull request #1462 from ramox81:codex/xref-attach-parity 2026-09-24 15:09:56 +03:00
ramox81andClaude Opus 5.5 6bd55bc32e Xref attach: Attach dialog, reference prompts, and xref drawings other applications can open
Attach External Reference dialog after XATTACH / ATTACH; ATTACH routes
drawings, PDFs and images; placement prompts and messages follow the
reference (presets, Corner/XYZ, nonzero check, existing definition reuse,
missing file, self-reference); name keeps the file's case; overlay and
path type at attach; one undo step for definition and INSERT; -XREF option
prompt and `?` table; XREF opens the palette; ER alias; xref Properties
rows; dependent symbols flagged and remapped and resolved content left out
of the saved file; dialog_ok automation action; localized labels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-23 14:44:12 +03:00
Luis Martinez 31711a4134 Harden missing font prompts for MCP sessions 2026-09-23 01:30:42 -06:00
Karim Jerbi 652f4d6bbc feat(blocks): implement Block Definition dialog (BLOCK/BMAKE) with on-screen sequencing
Implement the complete Block Definition dialog window launched via BLOCK
and BMAKE commands, featuring standard CAD layout, workflows, and entity
creation pipelines.

- Dialog UI & Layout:
  - 2-column compact CAD grid with synchronized vertical heights (580 × 390px).
  - Editable combobox with existing block names, invalid character validation,
    and inline redefinition badge.
  - Multi-line text editor widget for block descriptions (replacing single-line input).
  - Quick Select (QSELECT) button integration restoring dialog state upon completion.
  - Confirmation guard when attempting to redefine an existing block definition.
  - Centered radio buttons, clean coordinate inputs, and accessible keyboard shortcuts.

- Base Point & On-Screen Workflow:
  - BlockOnScreenCommand strictly enforces prompt sequencing: Base point is
    prompted before object selection.
  - Dynamically recalculates world_to_block and block_to_world affine transforms
    when base point is specified on-screen, preventing stale (0,0,0) normalization.
  - Supports Retain, Convert to block (INSERT placement), and Delete modes.

- Explode Enforcement:
  - Guarded EXPLODE command to prevent decomposing blocks flagged as non-explodable.

- Dynamic Themed Icons:
  - Added pick_point.svg, select_objects.svg, quick_select.svg, and warning_triangle.svg.
  - Routed all icons through the semantic theming engine so line work (#B4B6B9)
    and accents (#6DB7ED) adapt automatically to the active theme.

- Tests:
  - Added unit tests for retain/convert/delete modes, redefinition, explodable flag,
    on-screen base point transform recalculation, and command sequencing.
2026-09-22 17:05:15 +01:00
Hakan Seven 1c0ef9d7a0 Merge pull request #1353 from HakanSeven12/ui/options-ok-apply-close
feat(options): OK / Apply / Close with a discard guard

# Conflicts:
#	src/app/view/modal.rs
#	src/ui/window/options.rs
2026-09-19 22:59:56 +03:00
Hakan Seven b1080e02ca Merge pull request #1344 from HakanSeven12/plot/b3-psetupin
feat(plot): PSETUPIN, page-setup import and page setup for new layouts
2026-09-19 22:59:36 +03:00
Hakan Seven 879bb70c12 Merge pull request #1343 from HakanSeven12/plot/b2-dialog-options-sysvars
feat(plot): page-setup units, custom scale, dialog options and plot sysvars
2026-09-19 22:59:36 +03:00
Hakan Seven 37b24296d8 Merge pull request #1338 from ramox81/codex/properties-hyperlink-control
Fix Properties hyperlink collection editing
2026-09-18 18:52:37 +03:00
PanosandClaude Opus 5 1448909b6f feat(options): OK / Apply / Close with a discard guard
The Options window used to commit every control the moment it was
touched, with no way back but re-editing. It now works like the Drafting
Settings window: changes still show at once (a theme, a cursor size or a
language is seen immediately), but nothing is committed until Apply or OK.
Close — and the window's × or Esc — puts everything back the way it was
when the window opened or Apply was last pressed, asking first when there
is something to lose.

The commit point is a snapshot of the persisted configuration plus the
drawing variables the 3D Modeling page edits (with the drawing's modified
flag), so every control the window has or gains is covered without being
registered; reverting re-applies the snapshot the way start-up does and
re-bakes text or regenerates solids when those settings moved.

The "unsaved changes" guard is now a shared modal helper used by both
windows.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-18 14:53:54 +03:00
PanosandClaude Opus 5 74936063f9 feat(plot): PSETUPIN and page-setup import, page setup for new layouts
- PSETUPIN / -PSETUPIN: with no arguments a file picker offers the chosen
  drawing's named page setups in the Plot dialog; `PSETUPIN <file>` opens
  the same chooser on that file; `PSETUPIN <file> *` or
  `PSETUPIN <file> name,name` import straight away. Same-named setups are
  replaced, the import is one undo step, and the report counts both.
- The Plot dialog's page-setup list gains "Import…": the chooser shows the
  source drawing's setups with a tick each, All, Import and Cancel, and
  selects the first imported setup afterwards. The source is read off the
  UI thread with the same reader the editor uses for its own setups
  (`scene::document_page_setups`), and handles that only meant something
  in the source drawing (plot view, visual style) are dropped on import.
- Options → General → Plotting: "Show the page setup for new layouts"
  opens the Plot / Page Setup dialog whenever a layout is created
  (persisted with the plot preferences).

Tests: the document reader, the command (all / named / unknown / missing
file / undo) against a drawing saved by the app, the chooser flow, and the
new-layout option. Nine new strings in all 21 locales.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-18 14:53:09 +03:00
PanosandClaude Opus 5 7efb04a666 feat(plot): page-setup units, custom scale, hide-paperspace, save-to-layout and the plot sysvars
Plot dialog:
- "Units" (millimetres / inches) is the page setup's own unit: the offsets
  and the custom scale are shown in it, the stored ratio converts with it
  so the plotted result and the paper space's unit stay the same
- "Custom: [paper] mm = [drawing] units" spells the picked scale in that
  unit and accepts a typed ratio, which selects the list's name for it or
  becomes a ratio entry of its own
- "Hide paperspace objects" is the page setup's plot-hidden flag; it is no
  longer derived from the "Hidden Line" shade mode
- "Save changes to layout" (paper layouts, on by default) writes the dialog
  into the layout when a plot is sent; previews never touch it
- offsets are labelled in the page-setup unit and kept in millimetres in
  the file

System variables (typeable, through SETVAR, listed by SETVAR ?):
- PLOTOFFSET, PAPERUPDATE, PLOTROTMODE, PLOTTRANSPARENCYOVERRIDE and
  BACKGROUNDPLOT live with the persisted plot preferences: the plot origin
  counts from the printable corner unless PLOTOFFSET says the paper edge;
  a printer that does not list the sheet either warns or switches to its
  default sheet; transparency can be forced on or off; BACKGROUNDPLOT bit 1
  is the dialog's background switch and bit 2 drives batch plots
- CTAB and TILEMODE read and switch the current layout

Tests cover every new control and variable; six new strings in all 21
locales; the Plot dialog grows to 940×690 for the two extra rows.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-18 14:53:01 +03:00
ramox81 6a1c649016 Fix Properties hyperlink collection editor 2026-09-17 18:17:25 +03:00
Matus Mastena 82e410f8c0 Add a colour wheel for the viewport backgrounds
The Display page could only take a typed #RRGGBB, which is precise but
no way to choose a colour by eye. The swatches are now buttons that
open a wheel.

The wheel does not replace the hex field, it sits beside it: typing an
exact value stays the quickest way to reproduce a known colour. On
submit it hands a hex string to the existing ModelSpaceBgChanged and
friends rather than writing the config itself, so the two routes
cannot drift apart on validation, persistence, or the MatchTheme
fallback an empty field triggers.

Also stops the Browser shipping in the default dock layout. It was
added to the right edge, which shifted the block palette to index 1
and broke four dock tests that encode the existing arrangement. Those
tests were right and the change was wrong: the earlier commit claimed
to leave the layout alone. BROWSER now docks the panel on first use,
so nobody's edges rearrange on upgrade for a panel they never asked
for.
2026-09-17 16:54:11 +02:00
Karim Jerbi ef0c6bf403 feat: Reference Manager help window with web shortcomings
The toolbar Help button was a disabled tip that could never be clicked. It now opens a modal window explaining the manager on the web build: read-only reference list, disabled Attach/Refresh/Change Path (no filesystem access or native file pickers, so no add/reload/repath and no previews), nested read-only rows, and saved-drawing requirement for relative paths.

Includes a Report-an-issue button opening the GitHub issues page and a Close button; wired as ModalKind::XrefHelp through the shared modal frame so dismissal works on native and web.
2026-09-17 15:40:39 +01:00
PanosandClaude Opus 5 e623c053ab feat(ui): compatible right-click context menu driven by command options
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).

Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.

LINE gains options() (Close/Undo/eXit).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-17 12:05:14 +03:00
Hakan Seven 03f4e7cb86 Merge pull request #1309 from ghost/embed-print-fonts 2026-09-17 06:57:42 +03:00
PanosandClaude Opus 5 737666b894 feat(plot): printer driver properties and a roomier plot dialog
Properties… next to the printer used to open the CUPS web interface in a
browser. It now edits the driver options of the *selected* printer the
way LibreOffice's Properties… does, without leaving the plot dialog:

- CUPS platforms (Linux, any desktop; macOS): an in-line editor lists the
  printer's PPD options as `lpoptions -l` reports them — media type,
  colour mode, quality, duplex, trays, scaling — with readable choice
  labels, Reset / Cancel / Apply. Apply keeps only the choices that differ
  from the driver defaults, per printer, in the plot config, and every job
  for that printer passes them as `lp -o key=value`. Where CUPS cannot
  answer, the desktop's printer settings panel opens instead of a browser.
- Windows: the driver's document-properties sheet (`DocumentPropertiesW`
  with prompt, owned by the main window) and, on OK, the result stored as
  the user's printing preferences for that printer (`SetPrinter` level 9),
  which the job honours. `printui /e` (printing preferences) replaces the
  device-properties sheet as the fallback.

The desktop print portal was tried first and dropped: GTK 4's print
dialog loses the preselected printer when the default queue is listed
before it, so the dialog always opened on the wrong printer.

Dialog layout: the modal grows to 940×620; Printer / plotter and Paper
size share a line with their pickers (long queue and media names now fit);
Copies + Properties… and Custom… sit beneath; the custom-sheet editor
labels each margin (Left / Right, Top / Bottom) and shows the unit.

Also recognises `none_device`, AutoCAD's stored spelling for "no plotter",
and writes it back unchanged.

Tests: `lpoptions` parsing and keyword humanising, the editor flow (load,
stale answer ignored, set, apply, remember, reset, error, cancel), device
name round-trips including `none_device`.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-16 16:05:47 +03:00
huanld 28efbffd57 feat: embed images (OLE2FRAME), print pipeline fixes, plot prefs, community fonts
- IMAGEEMBED: pack raster images into OLE2FRAME entities so a .dwg is
  self-contained; 'Embed Image' entry in the XREF attach menu; control/MCP
  op embed_image for external tools; dxf_name for OLE2FRAME queries.
- Scene: populate_images_from_document now rebuilds OLE2FRAME and PDF
  underlay models too (they used to vanish after any XREF op).
- Printing: add PRINTER_ENUM_NETWORK pass when listing printers; GDI
  spooler fallback (hayro raster at 300 DPI + StretchDIBits) for hosts
  whose PDF handler registers no print verb; DEVMODE orientation with a
  90-degree raster rotation fallback for v4 drivers; fix the fit-scale
  precedence bug that printed blank pages.
- PDF export dialogs on Windows use the async file dialog so the native
  overwrite confirmation no longer deadlocks the UI thread.
- Plot dialog: persist the chosen printer (saved on selection) and the
  picked plot window across sessions; page setups with no device no
  longer reset the output device.
- Community fonts: detect unresolvable .shx references on open and offer
  a download from the repository's fonts/ folder (contribution guide in
  fonts/README.md); custom font source URL setting for intranet font
  servers; downloaded fonts resolve from the per-user fonts directory.
2026-09-16 16:42:21 +07:00
Karim Jerbi 1057790456 feat(ui): bring ALIASEDIT to shortcut-editor parity
Port press-to-capture dialog safeguards to the alias editor: transient top draft row with explicit accept, duplicate-alias and unknown-command danger styling plus persistent banners, reset-to-defaults with inline confirmation, Apply and Apply-and-Exit, alias count, Esc-cancels-draft-first, and unsaved-changes guard on close.
2026-09-16 09:32:06 +01:00
Hakan Seven af847ad92e Merge pull request #1299: Add Windows SpaceMouse navigation 2026-09-16 09:41:25 +03:00
Karim Jerbi 019422d220 feat(xref): docked External References panel with previews and translations
Docked External References panel with host row, thumbnail previews, and translated interface strings.
2026-09-15 23:56:31 +01:00
Karim Jerbi d0d946a568 feat(xref): detach, unload, reload, bind, overlay, and path operations
Detach, unload, reload preserving host layer overrides, bind, overlay, and saved-path editing, with per-tab session state and a read-only web list.
2026-09-15 23:56:31 +01:00
Karim Jerbi 42219a4b8c feat(xref): reference list with stale and orphaned status detection
Reference list rows showing stale and orphaned states with handle-based identity.
2026-09-15 23:56:31 +01:00
Christopher Overbeck 6a63726eff Add Windows SpaceMouse navigation through 3DxWare 2026-09-15 13:20:19 -05:00
Karim Jerbi 0e42e3bf28 fix(ui): keep DSETTINGS tabs on a single tab strip
Replace the wrapping button row with a real single-row tab strip (tab-shaped buttons + divider, matching style-manager editor shell). - Remove Row::wrap() so Selection Cycling can't spill to row 2; clip overflow - Active tab uses primary.strong, inactive weak/strong on hover, top-only radius - Tighten to size 11 / padding [4,8], spacing 2 - Widen Drafting Settings modal 700x480 -> 780x500 to fit 7 tabs
2026-09-15 16:09:00 +01:00
ramox81 66be530655 Complete automatic constraint behavior 2026-09-15 11:47:28 +03:00
Hakan Seven d738ebfcc6 Standardize parametric constraints and interoperability 2026-09-15 03:19:52 +03:00
Hakan Seven caec8dc53b Merge remote-tracking branch 'origin/main' 2026-09-14 20:24:54 +03:00
Karim Jerbi a0d784502a feat(ui): modernize DSETTINGS dialog with tabbed layout and action controls
- Redesign drafting settings window to landscape 700x480 proportions while preserving interactive resizing
- Add 7-tab navigation: Snap and Grid, Polar Tracking, Object Snap, 3D Object Snap, Dynamic Input, Quick Properties, and Selection Cycling
- Distribute existing drafting modes, snap options, and isometric tools into their respective tabs
- Implement OK, Apply, and Close action buttons with unsaved changes confirmation guard
2026-09-14 17:45:47 +01:00
ramox81 a35c996f9f fix(annotate): complete table and data workflows 2026-09-14 14:54:55 +03:00
Hakan Seven 95bad2a3b2 Fix web folder paths and allow main-only web hotfix deployment 2026-09-13 20:30:12 +03:00
PanosandClaude Opus 5 02b0f4c7d9 Tell the user when the scene is drawn without a GPU
A day of pan/zoom that had suddenly become unusable on a 1.2M-entity
drawing turned out to be no regression at all: an unattended NVIDIA
userspace update had been applied without a reboot, the Vulkan ICD could
no longer talk to the still-loaded kernel module, and wgpu silently fell
through to Mesa's llvmpipe. Nothing in the app said so. iced picks the
adapter and names it only under RUST_LOG, so the only evidence was 32
`llvmpipe-N` threads in /proc. The same silence covers WARP on Windows,
SwiftShader in browsers, and the case where wgpu finds no adapter at all
and iced quietly draws the chrome with tiny-skia while the shader widget
is dropped, leaving a blank viewport. This commit makes all of that
visible, on every platform, without new dependencies.

Detection (src/scene/pipeline/mod.rs)
-------------------------------------
`GpuStatus` is derived from two signals:

* `record_gpu_adapter`, run from `MultiPipeline::new` (once per device,
  next to the existing uncaptured-error handler), reads
  `Device::adapter_info()`, prints one `[gpu] adapter: <name> (<backend>,
  <device type>, driver …)` line — stderr natively, `console.warn` on the
  web, which has no stderr — and keeps a copy.
* `note_scene_draw`, run from `ViewportPane::draw`, counts how often the
  viewport asked for a primitive. Every renderer makes that call; only
  wgpu goes on to `prepare` and create a device. Three draws with no
  device ever recorded therefore mean the primitive is being dropped.

The verdict is one of `Unknown`, `Hardware`, `Software(adapter)` or
`NoRenderer`. `Software` is `DeviceType::Cpu` — what Vulkan reports for
llvmpipe, DX12 for WARP and GL for a renderer string that gives it away —
plus a name match on the fallbacks browsers expose (SwiftShader, llvmpipe,
lavapipe, "Microsoft Basic Render"), because the WebGPU backend reports
every adapter as `Other` (gfx-rs/wgpu#8819). Metal has no software device,
so on macOS only `NoRenderer` can occur (a VM without a GPU); it is caught
by the draw count like everywhere else.

`gpu_status_if_changed` costs one atomic load per app message: a
generation counter moves only when a device is recorded or the draw count
crosses its threshold, so the app re-derives the verdict a handful of
times per session.

Notification (src/app/startup.rs, view/modal.rs, ui/statusbar)
-------------------------------------------------------------
`refresh_gpu_status` runs after every message. On a degraded verdict it
speaks through three channels, because many users never read the command
line:

* A popup, `ModalKind::GpuWarning`, queued once per verdict through the
  startup-modal queue so it waits its turn behind the file open. It names
  the adapter, states the consequence (slow navigation, unstable or
  missing rendering) and gives the remedy that usually applies on the
  running platform: a driver update not yet followed by a reboot on
  Linux, a missing driver or a Remote Desktop / VM session on Windows, a
  VM without a Metal device on macOS, hardware acceleration switched off
  in the browser. "Don't show again for this device" stores
  `GpuStatus::identity()` in `settings.gpu_warning_silenced`; keying it by
  verdict means silencing "software rendering on llvmpipe" does not
  silence a later, different failure.
* A status-bar pill in the theme's warning colours, `⚠ Software rendering`
  or `⚠ No GPU renderer`. It is not a `StatusPill`, so it cannot be hidden,
  and it stays for the session; clicking it reopens the popup, silenced or
  not.
* A command-line entry through the new `CommandLine::push_warning`, which
  is styled like an error but deliberately does not touch `last_error` /
  `error_revision`: automation reads those to decide whether the command it
  just ran failed, and a graphics warning is not a failed command.

`subscription()` requests frames only while the verdict is `Unknown` on a
document tab (the Start page draws no viewport), so the probe costs one
frame on a working GPU, three on none, then stops.

Verification
------------
* Live on the machine that had the incident, with the Vulkan loader
  restricted to Mesa (`VK_DRIVER_FILES=…/lvp_icd.json WGPU_BACKEND=vulkan`):
  popup → OK → pill → click reopens; "Don't show again" → restart → pill
  only, no popup.
* `gpu_tests::the_adapter_is_reported_once_per_device` (ignored, needs an
  adapter) asserts the classification on a real device; it was run on both
  llvmpipe (`Cpu`) and an NVIDIA GT 1030 (`DiscreteGpu`).
* Unit tests cover the name heuristic, the verdict function, the identity
  rule, the warning text with an adapter name that itself contains
  parentheses and commas, the settings round trip and the command-line
  semantics. New strings are in all 21 locales as the `gpu` Fluent group.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-12 16:19:41 +03:00
Hakan Seven 9b58ca8a93 Harden parametric sketch constraints 2026-09-11 09:45:57 +03:00
Felix Riestra ad718def3f Merge remote-tracking branch 'origin/main' into merge-test/main-into-constraints
# Conflicts:
#	src/app/command_driver.rs
#	src/command.rs
#	src/ui/ribbon/mod.rs
#	src/ui/window/options.rs
2026-09-10 23:34:50 +02:00
Felix RiestraandClaude Sonnet 5 bd9a2d08f7 Add Properties-panel Constraints/Parameters sections, a constraint-pill
value toggle, and redesigned constraint-ribbon icons

Properties panel:
- New "Parameters" section (shown with no selection) listing every named
  parameter with inline name/formula editing, add, and delete, backed by
  new PropValue::ParamRow/ParamAddRow and command_driver handlers
  (resolve_named_parameter_edit, on_prop_param_commit/_delete/_add_new).
  A fresh parameter's formula now defaults to "1", not "0" — a 0-length
  seed value is a genuine solver singularity for a Distance constraint
  driven by that parameter, with no defined direction to grow back out of.
- New "Constraints" section (shown for a single selected entity) listing
  every constraint touching it as a clickable PropValue::EntityLink that
  selects the linked entities in the viewport, danger-tinted when the
  constraint conflicts.

Constraint pills:
- New Options > General toggle, "Show values and parameter names on
  constraint markers" (on by default, persisted). Off, every pill shows
  just its bare glyph instead of glyph+driven-value/parameter-name — the
  glyph alone is enough to see a constraint is present, without the value
  text covering nearby geometry on a dense sketch.

Constraint-ribbon icons:
- Replaced all 18 unicode/letter glyph icons (including the plain "F",
  "L", "M", "S" letters) with proper SVGs under assets/icons/constrain/,
  matching the Modify section's two-color style (#B4B6B9 white / #6DB7ED
  blue, consistent stroke width). Tangent reuses the Draw section's
  white-arc-plus-blue-dots motif.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-09-10 23:16:11 +02:00
Felix RiestraandClaude Sonnet 5 3d0a41b69a Extend sketch constraints toward FreeCAD parity, staying DWG-native-compatible
Arcs are now full constraint participants (center/radius via the existing
Circle-shaped solver path, plus real endpoints kept consistent by arc-rules
CurveValue constraints); adds Diameter/DistanceX/DistanceY/ArcLength/Normal
constraint kinds and initial Ellipse entity support (center-based
constraints only). DWG-native class mappings and gaps (ArcLength, Ellipse)
are grounded against real ObjectARX headers rather than guessed, so files
saved with DWG-native constraints stay honest about what AutoCAD can
actually represent.

Also fixes a case-sensitivity bug where a lowercase named-parameter
reference typed at a dimensional constraint's value prompt was rejected
(the command line uppercases SingleToken input before the parameter-name
lookup), and adds a "Used by" column to the Named Parameters panel.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-09-10 10:58:21 +02:00
PanosandClaude Opus 5 7ea1aef95e Add a Files page, and links out to the editors that own their own dialogs
The application has no support-file search path — the four folders it uses
are functions returning fixed paths, not settings. Rather than build a Files
page that pretends otherwise, this one answers the question people actually
open it to ask: where does this thing keep my plot styles. Each row shows the
location and opens it in the file manager, and a row whose path the platform
could not give says so with its button disabled.

General gains buttons through to the plugin manager, the keyboard shortcut
editor and the alias editor. Those three have good dialogs of their own and
are not absorbed; Options simply stops being a place you cannot reach them
from.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-10 08:45:20 +03:00
PanosandClaude Opus 5 5a638f243a Make the view toggles survive a restart, and give them a page
The ViewCube, the UCS icon, its at-origin placement and selection cycling all
have commands and status-bar pills, and all four kept their value only on the
app struct. Turn the ViewCube off with NAVVCUBE, restart, and it is back.
Nothing failed — the setting evaporated — so a checkbox for any of them would
have been a checkbox that forgets. They are persisted first, with a
round-trip test, and only then given controls.

The new 3D Modeling page carries the three view tools plus the drawing
variables that decide how solids are tessellated: ISOLINES, DISPSILH, SURFU,
SURFV, SURFTYPE, SOLIDHIST and SHOWHIST. Those are saved in the DWG rather
than in preferences, so the page says so beside each group and hides them
entirely when no drawing is open.

Changing them also rebuilds the geometry. The SETVAR path never did, which is
why the comment beside LTSCALE's invalidation exists — the same reasoning
applies here, and without it a new isoline count does not appear until some
unrelated edit rebuilds the solid.

Selection cycling joins the Selection page next to the other two selection
modes, since that is what it is.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-10 08:41:26 +03:00
PanosandClaude Opus 5 b5f4b4d1cc Add a Drafting page for the rotation angle and the polar increment
Two drafting preferences had no proper home. The Drafting Settings dialog
displays the drafting rotation and offers only a Reset button — there was no
way to type an angle short of `SETVAR SNAPANG`. The polar tracking increment
existed in exactly one place: a pop-up hanging off the status-bar pill.

The rotation is a text field over an edit buffer rather than the value
itself, so clearing it to retype does not snap the crosshair to zero on the
way through; the buffer is reseeded whenever the value is restored from
behind it. Angles render without a trailing `.0`, matching how the polar
pop-up has always shown them — same kind of number, same reader.

Snap modes, grid spacing and object snap stay in Drafting Settings, where
they belong; the page links to it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-10 08:33:19 +03:00