#1692 limited no-trim FILLET to two lines and refused arcs and polyline
segments, which #1558 already filleted without trimming (only the arc is
added). It also turned T/N at the object prompts into silent toggles, so
the Trim option no longer reached its Trim/No trim prompt and the choice
was not saved. Keep the arc bookkeeping it added (the new arc can be
picked next, and stays on the picked layer), restore every pair and the
Trim prompt.
CHAMFER's new no-trim mode starts from and saves the same TRIMMODE value
as FILLET instead of always starting trimmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Pins: codec 8189f83, kernel a82f17d, graph d3558bb (all manifests and
the python plugin lock).
- MASSPROP reports volume, centroid, inertia, products, radii of
gyration and principal moments of 3D solids and bodies from their
B-rep (exact where analytic, else from a fine mesh).
- OFFSET of ellipses and splines through the kernel's curve offset.
- FILLET between circles, ellipses and splines through the kernel's
curve-curve fillet, trimming arcs and open splines to the tangents.
The kernel bump brings the DWG ACIS audit fixes: slices, booleans and
press/pull on cones, slanted cylinder sections, survey coordinates,
spline walls and touching parts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The text was placed by its alignment rather than its attachment point,
so text on the left of the landing ran over the leader. It now attaches
by the attachment point, and putting the text on a side (on creation or
by a grip) turns left- or right-justified text to read away from the
leader.
Fixes#1646
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- An open path is swept from its end nearest the pick point (in plan), as
the reference does; the record keeps the original path and the placed
frame marks the start.
- Kernel from ramox81/cadkernel 1df75f5: one face per path run for
twisted, scaled and spline sweeps, placed records swept from the placed
end, end caps without pcurves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dynamic-input fields take ' and " and read 2'9" / 3' as lengths (#937)
- STRETCH on a selection made by a crossing window stretches through that
window and goes straight to the base point (#1068)
- STRETCH's crossing-window steps show no coordinate boxes (#657)
- Collapsed ribbon panel titles wrap at words, never mid-word (#920)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brings codec PRs #84 (cross-version visual styles, table styles,
subentity managers), #88 (viewport clipping flag, DXF boundary handle),
#89 (DXF viewport snap/twist in degrees) and #92 (field format codes,
event updates).
With #88 a viewport keeps a stored boundary whether or not clipping is
on, so a linked boundary alone no longer means "clipped": rendering,
paper picking, VPCLIP and the Clipped property check the clipping flag
too, and VPCLIP / MVIEW Object and Polygon set it. Before, OCS never set
the flag, so its clipped viewports opened rectangular elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Invalid Area "Undo" reverts the step that lost the boundary (redo after
an undo, undo otherwise), checks the boundary is back and otherwise puts
the step back and continues without the area; no auto-undo loop.
- COUNTCLOSE / area replacement remove the count polyline outside the
history instead of as an undo step of their own.
- UPDATEFIELD re-evaluates the field texts of a table's *T block and
reports the number actually updated.
- Zoom to a counted object goes through the f64 handle_zoom_to_window.
- Palette: SVG icons instead of glyph text, list cache keyed by tab id,
cached result borrowed instead of cloned, "Count" as the source text.
- Command-line messages go through t!/tf! with entries in all locales.
- Cleanups: \n escapes, area comment, unused parameter, comment order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- COUNTCOLOR / COUNTERRORCOLOR / COUNTSERVICE reject any other value with
the range message; COUNTTABLE ? lists in the reference order, padded,
22 lines a page with Press ENTER to continue:, then the totals.
- Target picks report N found / N found, M total; several objects (or one
that is not a block reference) count their copies, shown as Geometries
in the palette.
- Current area is the area in use (kept aside by Entire model space),
otherwise all of model space; an invalid Object boundary ends with the
reference message.
- Count colours reach solids and fills; the palette list and the count
are recomputed only when the drawing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DXF reader keeps marker identities on the block record but never materializes the entities, so block_entity_handle/block_end_handle dangle after every DXF load (reopened baked *D dimension blocks hit this every time). Re-create missing sentinels at load finalize, reusing the file handle when free and minting otherwise. Idempotent and DWG-safe: loads whose markers already resolve are untouched. Pinned by dimlinear_survives_save_reload_with_baked_geometry.
With objects already selected, OFFSET opens at the side step with the
preview following the cursor instead of asking for a distance first
(#422). At the side step a typed distance places the offset at once on
the cursor's side, and a negative one on the other side; Enter at the
start repeats the last distance (#418). Erase and Layer, which lived on
the skipped distance step, are offered there too. With nothing selected
the distance-first flow is unchanged.
The opposite side is found by mirroring the cursor through its nearest
point on the outline, capped at half the offset distance so it cannot
cross a narrow gap back to the cursor's own side. Two new prompts are
added to the catalog and every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts with #1573: the locale files and the catalog take both PRs'
entries (one "Insertion Point" mapping kept); the Home and Insert Block
panels take #1574's layout with #1573's Insert Block gallery.
#1567 made every vertex a trim limit, so a polyline no edge crosses lost
the clicked segment and a trimmed piece stopped at the next corner instead
of running on to the next cutting edge. Vertices are no cuts again, a
polyline with no cut is left alone, and its own crossings cut it only when
it is among the cutting edges. The crossing window's unused pick corner is
dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Field dialog with the fields the application evaluates and the
reference format choices, FIELD placing a field as multi-line text, the
attribute definition dialogs' field buttons, field attachment on commit,
system variable / file size / regional date providers for field
evaluation, and the codec patch with the field authoring API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Real BT/Tj text objects ride alongside the vector outlines (Tr 3,
zero visual change): runs preserved at layout time, TTF styles embedded
as allsorts subsets with ToUnicode, width-matched Tm, clip-culled.
WireModel literals moved to ..Default::default() tails.
