#218: with Ortho on and a base point the axis is now a hard lock — a lone
tracking ray can't pull the cursor off it. Only a tracking ray crossing
the ortho axis locks (the corner-finding case); otherwise the ortho
constraint applies as the fallback, so Ortho reliably locks when OTRACK
is also on.
#219: an acquired corner now contributes an alignment ray along its own
edge direction(s) (captured once at acquisition), so OTRACK follows a
segment's extension, not just the ortho/polar axes. Acquisition is also
captured on leave — a perfectly still cursor emits no move events, so
"pause on a corner, then drag" now reliably acquires it. The acquired
marker projects through the active pane's camera + rect (canvas offset
included) instead of vanishing, and the active alignment path is drawn
as a full-length dashed guide through the corner.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extension osnap now offers a ray off every polyline vertex, not just the
first and last, and snaps to where two segments' extension lines would
cross. That crossing is emitted as an Intersection so it outranks the
per-segment extension feet on their own lines. When it wins, both
contributing extensions are re-detected — off-ray distance measured in
screen space so the tolerance holds at UTM coordinates — and the overlay
draws a dashed guide from each endpoint through the crossing, so both
extension paths remain visible instead of vanishing when caught.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Layer Manager already applied colour/linetype/lineweight in bulk;
extend that to the rest:
- Visibility, lock and freeze toggles now act on every selected layer, not
just the clicked row. The clicked row's new state becomes the target for
all. Transparency edits apply to the whole selection too.
- Clicking a linetype/lineweight combo on a row that is already part of a
multi-selection no longer collapses the selection (the whole row is one
mouse_area whose plain-click select would otherwise reset it), so those
edits stay bulk.
- Ctrl/Cmd+A selects every layer row while the Layer Manager is open, and
all drawing objects otherwise.
Two now-unused Scene layer-toggle helpers are removed (the handlers set the
flags directly and bump once).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On German/European layouts the numpad decimal key emits a comma, which the
coordinate parser rejects. Match the physical NumpadDecimal / NumpadComma
key and emit '.' regardless of the OS layout. (#201)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Remove the OCS-logo button and the dropdown menu it opened; the top strip
now shows direct New / Open / Save / Save As / Print buttons ahead of the
undo/redo controls. Drop the HELP and OPTIONS commands (HELP dumped text to
the command line, OPTIONS aliased the drafting-settings popup).
The app-menu overlay is gone, so its rendering code, MENU_ITEMS, four dead
messages, and the LOGO_RED / GEAR / HELP assets are removed. The recents
list it held is the only survivor — moved into OpenCADStudio.recent_files
via a new app/recent.rs, backing the Start page's Recent Documents panel.
Quick-access icons are redrawn in a cleaner style (file-plus, folder-open,
device-floppy, file-export, printer) and tinted light so they read on the
dark strip; FOLDER / DOC keep their old glyphs for the file browser.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a right-hand rail on the Start page listing active paying patrons
(name + pledge amount, highest first) with a "Support on Patreon" button.
The list is fetched once at boot from the Patreon API in the background;
free followers, $0 tiers, declined and former patrons are excluded.
The creator access token is read at build time from OCS_PATREON_TOKEN
(option_env!), so it never lives in source or git — the release workflow
passes it from a repo secret, and build.rs re-bakes when it changes.
Without a token the rail just shows the support button.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Show two clickable video thumbnails side by side on the Start page; a
click opens the video in the system browser. Refactor the card into a
shared builder and bundle the second thumbnail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Extension object snap worked but drew no tracking path, so it was
easy to miss — users had to keep the cursor exactly on the invisible
extension line without any visual cue.
When an Extension snap is active, draw a dashed guide line from the
endpoint it extends from, through the snap point and a little beyond,
and orient the three-dot marker along that direction. SnapResult carries
the endpoint screen position (filled once the winning snap is known);
the overlay renders the guide.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The command-line history dropdown was display-only, so users had to
screenshot and OCR the log to report output. Make it copyable:
- Render the whole backlog in one read-only text_editor so a single
mouse drag selects across lines and Ctrl+C copies the span.
- Add Copy (whole log to clipboard) and Clear buttons to the dropdown.
- Gate the Ctrl+C/X/V accelerators on event Status::Ignored so a focused
text widget's copy/cut/paste wins instead of firing COPYCLIP/CUTCLIP;
the drawing's clipboard shortcuts still work when it has focus.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Layer Manager only allowed one layer at a time. Now:
- Ctrl/Cmd-click toggles a layer in the selection; Shift-click selects
the range from the anchor; a plain click selects just one.
- Colour, linetype and lineweight changes apply to every selected layer.
- Delete removes all selected layers at once (reusing the #237 non-empty
warning, now pluralised); layer "0" and the current layer are skipped.
Selection is stored as row indices but re-resolved by name across sorts
and layer-table rebuilds, so it never points at the wrong rows. Modifier
state is tracked via a new SetModifiers message (shift + ctrl/cmd).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Deleting a layer only dropped the layer record, leaving its objects in the
file still tagged with the (now-gone) layer name. Now:
- Empty layer → deleted straight away.
- Non-empty layer → a warning modal ("Layer X is not empty — N objects;
deleting also removes them. Continue?") with Delete Objects / Cancel.
Confirming erases every object on the layer, then removes the layer, as
one undo step. The layer record is dropped before the erase so the
locked-layer guard can't keep its objects.
- Layer "0" and the current layer can't be deleted (reported on the
command line) instead of silently leaving a broken state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Locked-layer objects were fully editable. Now they stay visible and
snappable but are otherwise protected:
- Not selectable: the five interactive pick paths (box, lasso, single
click, cycling, box-release) plus SELECTALL and QSELECT skip locked
entities.
- Not modifiable (defense-in-depth even if a handle slips through):
transform_entities, erase_entities, apply_grip and the Properties
commit all skip locked entities.
- Faded: entities on a locked layer render dimmed toward the background
(render_style + wire tessellation); toggling lock re-tessellates.
- Snap still works: locked entities are intentionally kept in the wire
set (visibility_ok untouched), so object snap keeps finding them.
- Feedback: a small padlock is drawn by the crosshair when hovering a
locked object, and clicking one prints "Object is on locked layer …".
New Scene::is_layer_locked / locked_layer_name helpers centralise the
check (mirroring layer_hidden).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grow the attribute editor into a three-tab enhanced editor:
- Attribute: the tag/prompt/value list; click a row to select it, edit
its value below.
- Text Options: the selected attribute's Text Style, Justification,
Height, Rotation, Width Factor, Oblique Angle, Backwards, Upside down.
- Properties: the selected attribute's Layer, Linetype, Color,
Lineweight (the colour list also surfaces a non-standard current
colour so it displays and round-trips).
Applying writes value, text-formatting and common-property edits back to
each attribute positionally (guarded on block name + count), with undo
and a repaint. OK/Cancel are replaced by a single Apply button in a top
toolbar that commits but keeps the dialog open, matching the other modal
windows — the frame ✕ closes and discards un-applied edits. The frame
adopts the shared style-window palette, tab styling and sizing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The ribbon layer dropdown grew unbounded so a long layer list ran off the
bottom of the screen with no way to scroll. Cap the panel height and make
the list scrollable; short lists still shrink to fit.
While a dropdown was open, the 3D viewport beneath it kept tracking the
cursor over the panel's empty areas, and the OS cursor vanished there. In
iced 0.14 mouse_area/opaque only capture button presses, never CursorMoved,
so a higher stack layer can't swallow motion — gate it state-side instead:
- ignore viewport motion in on_viewport_move while ribbon.open_dropdown is set
- suppress the crosshair overlay's Hidden cursor (and crosshair draw) so the
normal OS cursor shows over an open dropdown
- route all ribbon dropdown backdrops through a shared dropdown_backdrop()
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A periodic subscription (every SAVETIME minutes — default 10, 0 disables)
writes a <name>.sv$ recovery copy of each dirty, already-saved drawing at its
own DWG version. Non-destructive: it never touches the original file or the
dirty flag, and skips unsaved (path-less) tabs. The SAVETIME command
sets/queries the interval and persists it. Recovery files (.sv$ and .bak) open
through the normal Open dialog — the loader detects DWG vs DXF from the leading
magic bytes, and a "Backup / Autosave" filter lists them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two in-canvas confirmations on the Save-As path:
- AEC/Civil drop warning: when the drawing carries unsupported AEC/Civil
(application) objects that survive only as verbatim source-version bytes,
saving to a different version or to DXF would silently drop them. The
dialog reports the count and offers "Save in source version" (keep) vs
"Save anyway" (drop). Same-version DWG saves are lossless and skip it.
- Overwrite confirmation: when the chosen filename already exists in the
target folder, "Replace" / "Cancel" before clobbering it.
The two chain (AEC first, then overwrite) via per-flow acknowledgement flags
reset whenever the Save dialog opens or closes. Detection is a new
io::dropped_on_save_count over the document's Unknown (raw-passthrough)
objects/entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keyboard accelerators (copy/paste/save/undo/new/open) were gated on
`Modifiers::control()`, which on macOS matches only the physical Control
key. Mac users pressing Cmd+C/V/S/Z got nothing, contrary to platform
convention and every other Mac app.
Switch the gate to `Modifiers::command()`, which iced resolves to the
Logo (Cmd) key on macOS and Ctrl on Windows/Linux. On non-mac targets
this expands to exactly `control()`, so behavior there is unchanged.
Also make the Keyboard Shortcuts reference window display the
platform-correct modifier name (Cmd vs Ctrl) so the help matches the
keys the user actually presses.
Closes#202
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Adds a configurable right-mouse-button behavior without disturbing orbit
or the context menu.
- New persisted setting `rmb_enter` (command `RMBENTER [ON|OFF]`, default
off): when on, a right-click while a command is active acts as Enter
(commit/close); when idle it still opens the context menu. Right-drag
always orbits, so nothing is lost.
- Right-click vs orbit is now time-based: orbit engages only after the
button is held >=150ms and the pointer moves, so a quick right-click is
no longer swallowed by slight pointer jitter (was an 8px distance gate).
- The right-click Repeat menu now lists commands from every source
(command line, ribbon, context menu, shortcuts) via a unified
recents list recorded at the dispatch choke point, instead of only
typed commands.
Closes#185
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keep the right-side status-bar tools from being pushed off the bar when a
drawing has many layouts: the layout tabs now live in a horizontal scrollable
that only takes the space left between the menu and the tools, with ‹ › arrows
(and the mouse wheel) to scroll them.
Repurpose the leftmost hamburger — which previously fired a no-op MENU command
— to open a dropdown listing Model and every layout (scrollable, current
highlighted); picking one switches to it, an outside click dismisses it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Swap the two "Free and open source" / "Community driven" text cards on the
start page for the intro-video thumbnail with a play badge; clicking it opens
the video in the system browser (new Message::OpenUrl → sys::open_url). The
bundled thumbnail Handle is built once via OnceLock — Handle::from_bytes mints a
fresh unique id per call, so rebuilding it per view re-decoded and re-uploaded
the JPEG every frame and the image only appeared after a long delay.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the custom model_tiles tiling with iced 0.14 pane_grid as the layout
source of truth, while paper-space floating viewports are left untouched (they
overlap/free-place, which pane_grid cannot model).
Each Model pane is its own shader widget rendering its camera into the pane
bounds; the renderer Primitive carries a base_slot so several shader widgets
share the type-keyed MultiPipeline storage on disjoint slots. A second pane_grid
of transparent mouse_areas (plus on_resize) layers above the crosshair overlay
to receive input — the overlay's Hidden cursor interaction otherwise levitates
the cursor and starves any layer beneath it. The active pane follows the cursor
(hover-activate), and grid / crosshair / UCS icon render per pane while the
ViewCube and render-mode picker stay on the active pane only.
Split / close / VPORTS presets and the VPort table round-trip now drive
pane_grid (guillotine reconstruction on load). Adds drag-to-swap via a controls
bar handle with a ghost-card preview, visible pane dividers from the pane_grid
split regions, a default model background of RGB(33,40,48), and removes all the
superseded custom-tile code.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reduce the ViewCube 30% (VIEWCUBE_PX 120→84) and tighten the nav region
(NAV_INSET_F 2.2→2.0) so the home / roll / nudge controls hug the cube in the
corner instead of floating in a large dead area, with sizes scaled to keep them
from overlapping. Bump the home and roll buttons back up slightly, shift the
UCS picker down below the region, and give it a fixed width so it centres
exactly under the cube centre.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The UCS icon now anchors to the projected UCS origin when it is on-screen
(falling back to the bottom-left corner), and becomes a selectable object:
hover highlights it, a click shows draggable grips, and dragging the origin
grip relocates the UCS while the X/Y tip grips rotate it. Drags snap to
geometry/grid through the existing snapper, and the new UCS is persisted on
release. The icon stays selectable while parked in the corner.
Also make the ViewCube compass (N/E/S/W) world-fixed: the cube body still
reorients with the active UCS, but the cardinals project through a camera-only
rotation and snap in world frame, so the directions no longer spin with the UCS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Continue tidying the flat ui/ root:
- ui/statusbar/: statusbar.rs becomes statusbar/mod.rs (its
crate::ui::statusbar::* paths are preserved) and absorbs
statusbar_config.rs + statusbar_menu.rs.
- ui/window/: the standalone manager/dialog windows move here —
about, layout_manager, page_setup, plugin_manager, shortcuts,
layers, update_notice, open_progress. The crate::ui::LayerPanel
re-export is repointed so callers are unchanged.
Call sites repointed to the new paths; no compat re-exports beyond the
existing LayerPanel one. ui/ root drops from 21 to 10 flat files with
five subdirs (ribbon, style, popup, statusbar, window).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Group the flat src/ui/ dir: move the 9 style editors into ui/style/
(dimstyle, mleaderstyle, mlstyle, plotstyle, textstyle, tablestyle,
point_style, style_list, style_manager) and the 6 popups into
ui/popup/ (cycle, isolate, scale, selection_filter, snap, units).
Call sites repointed to crate::ui::style::/crate::ui::popup::; no
compat re-exports. ui/ root drops from 36 to 21 files.
- Rename app/cmd_result.rs -> app/command_driver.rs: the file is the
StepInput->feed_command driver, not the CmdResult type (which lives
in command.rs). Name now matches contents.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Break up the four giant files (~29k lines total) into focused submodule
directories, one concern per file. Pure mechanical moves — behavior is
unchanged.
- app/update.rs (9650) -> app/update/{mod,viewport,command,style,file,
dynamic,dialog,util}. The 384-arm update_inner match stays in mod.rs
with thin delegating arms; the 66 fattest arm bodies move to topic
methods. Arm set preserved exactly (384 -> 384).
- scene/mod.rs (9017) -> scene/{mod,entity,tess,hittest,layout,paper,
mspace,project,selection,modify,group_layer,preview}. The impl Scene
body is split across files via inherent-impl-per-file; struct, ctor,
fields and load-time helpers stay in the root. fn count 123 -> 123.
- app/commands.rs (6082) -> app/commands/* grouped by command family.
The 233-arm dispatch match becomes source-ordered per-family
dispatch_* handlers, preserving first-match precedence (233 -> 233).
- app/view.rs (4686) -> app/view/{mod,overlay,modal,viewcube,controls}.
Largest file drops from 9650 to 3343. Builds clean; app launches and
loads plugins with no panic.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
