Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
The ribbon offered four styles and dispatched each one's id as a command.
Two of those ids were not visual-style commands: "Shaded" carried SOLID,
which draws a 2D filled polygon, so choosing it started a draw command;
"Hidden" carried HIDDEN, which matched nothing at all, so it did nothing.
The intent had been for the button to fire its tool's event, but the
dropdown never reads one -- it dispatches the id.
Behind that sat two generations of the same feature. The render-mode
picker offered the seven styles a viewport can actually be drawn in;
everything else -- the ribbon, VSCURRENT, SHADEMODE, VISUALSTYLES and a
handful of bare verbs -- went through a binary wireframe-or-shaded flag
that could only approximate them, reporting "Hidden (shown shaded)" and
"X-Ray (shown as wireframe)" when asked for something it had no way to
draw. Four descriptions of one choice, each drifting on its own.
There is one list now. Each style names itself once -- mode, label, icon,
and the command that applies it -- and the ribbon, the picker, the
VISUALSTYLES verb and the interactive prompt all read from it, down to
the line that lists the choices, so what is offered cannot disagree with
what works. Keywords are the render modes' own names, since there is one
set of styles left to name.
The binary path is gone rather than kept alongside: its message, its
module event, the tool definitions that produced it, the ribbon's
special-cased highlight arms, the bare style verbs and the older keyword
spellings. X-Ray goes with it -- no render mode draws one, and it was
already coming out as a plain wireframe. Three files that had been left
holding a single icon constant each fold into the list.
Note: ModuleEvent::SetWireframe leaves the plugin API with it.
Closes#621
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Hold edit leases and compare disk fingerprints before replacement so another editor cannot be silently overwritten.
Offer retry, reload, Save As, or explicit overwrite recovery.
Closes#498
Replace full-document snapshots with Arc first-touch deltas and batch cache invalidation. Reuse interaction and GPU category caches across unrelated edits.
SCRIPT/SCR, DATALINK, LANDXMLIMPORT, CUIEXPORT, CUIIMPORT/CUILOAD now prompt
for the path via ValuePromptCommand instead of printing usage when run bare;
each dispatches `NAME <path>` to the existing inline handler. The path keeps
its case (dispatch does not upper-case arguments), so case-sensitive paths on
Linux/macOS still resolve. A native file dialog would be a nicer follow-up.
Convert the remaining bucket-B commands to prompt step by step instead of
requiring arguments or printing usage:
- KeywordCommand (buttons): VIEW, LINETYPE, SCALELISTEDIT, UCSICON, VSCURRENT.
- ValuePromptCommand (one value): LAYDEL (layer), ATTSYNC (block).
- TwoValuePromptCommand (new; two values): LAYMRG (source + target),
SETVAR (variable + value, blank second reads).
Each bare form now starts the stepped front-end and delegates to the existing
inline handler; the argument form is kept and is the dispatch target. The
direct visual-style shortcuts (HIDDENLINE / XRAY / …) and UCSICON's argument
form are untouched.
COUNT is intentionally left alone: bare COUNT already reports the tally (a
useful inquiry action, not a usage line), so prompting would only add friction.
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bare BACKGROUND now opens an interactive colour prompt (via
ValuePromptCommand, same idiom as PDMODE/LTSCALE) instead of just
printing usage, so the command works both step-by-step and as a
one-shot `BACKGROUND <colour>`. Options reordered to
Default/Black/DarkGray/Gray/LightGray/White; DEFAULT restores the app
default, now unified to rgb(33,40,48) across startup, load and reset.
Also drop the unreachable OPTIONS arm in dispatch_display.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The .sv$ recovery copies only need to survive a crash, so they are removed on
a clean save (Save and Save-As both delete the file's .sv$ after writing) and
on a clean exit — a new exit_app() runs cleanup_autosaves over every open tab
before quitting, and all iced::exit() paths now funnel through it. A leftover
.sv$ therefore signals an unclean shutdown, i.e. something to recover.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Package the drawing plus its referenced files (xrefs + raster images)
into a sibling "<name>_archive" folder via std::fs, reusing the
existing block_records / entities iterators. COMMANDS.md: 217/262.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Six more standard commands by reusing existing infrastructure:
- CLOSE: close the active tab (Message::TabClose)
- HIDE / VISUALSTYLES: per-viewport render mode (Message::SetRenderMode)
- QUICKCALC / QC: alias the CAL arithmetic evaluator
- HYPERLINK <url>: attach a hyperlink via the PE_URL XData record
- XOPEN: open a selected xref's source file (Message::OpenRecent)
COMMANDS.md updated to 214 done / 15 partial / 33 missing of 262.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Integrate a large batch of standard CAD commands and fix several
name/behaviour mismatches, with no product references in code.
3D solids (reusing the truck B-rep pipeline):
- SLICE, INTERFERE, PRESSPULL, POLYSOLID, PYRAMID, SECTION
- 3DROTATE, 3DMIRROR, 3DALIGN (cached-solid transforms)
Annotation / text:
- ARCTEXT, SPLINEFIT (Catmull-Rom to Bezier), DIMJOGGED, OBJECTSCALE
(XData markers honoured by the existing geometry-gen / tessellator)
Blocks / misc:
- NCOPY (block-content extraction via explode_entity)
- OPTIONS, SYNCPVIEWPORTS, THICKEN, plus earlier toggles, aliases,
system variables, and layer/style/view commands
POINTCLOUD/RECAP and UNDERLAYLAYERS/UOSNAP are intentionally left out:
they require a proprietary binary / PDF-layer parser, a GPU point
renderer, and real test files.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Broad pass over the command set: integrate missing commands, wire
previously-unreachable ribbon/menu buttons, and correct name/behaviour
mismatches. Every UI command token now resolves (real handler where the
infrastructure exists, an honest "not yet implemented" status otherwise).
New commands:
- Draw: 3DPOLY, 2D solid (SO/SOLID2D), HELIX, TRACE, SKETCH, DIMCENTER
(DCE/CENTERMARK)
- Modify/inquiry: REVERSE, MEASUREGEOM (MEA), DBLIST
- Data/manage: BASE, OVERKILL (exact-duplicate removal), AUDIT (read-only
integrity report), SETVAR (system-variable get/set), SCRIPT (.scr runner),
FINDNONPURGEABLE
Behaviour fixes:
- LINE and SPLINE gain Close/Undo; AREA computes area/perimeter in f64
(correct at large coordinates)
- ATTEDIT/ATE unified so the alias and the ribbon button open the
interactive editor; -ATTEDIT is the command-line form
- Linear/aligned/radius/diameter dimensions gain a text override (Text) and
text angle (Angle) option
- INSERT gains Scale/Rotate options; COPY gains an Array option
- LINETYPE SET sets the current entity linetype; SETBYLAYER resets overrides
- UNDO accepts a step count
Integrations: standard dimension/block aliases (DLI/DRA/DAN, BMAKE,
EXPORTPDF, DDIM), drafting-aid and screen toggles (GRID/SNAP/POLAR/OSNAP/
DSETTINGS/CLEANSCREEN/QUICKPROPERTIES), viewport tiling
(CASCADE/HORIZONTAL/VERTICAL/VPJOIN), and customization entry points
(CUI/ALIASEDIT).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Break up the four giant files (~29k lines total) into focused submodule
directories, one concern per file. Pure mechanical moves — behavior is
unchanged.
- app/update.rs (9650) -> app/update/{mod,viewport,command,style,file,
dynamic,dialog,util}. The 384-arm update_inner match stays in mod.rs
with thin delegating arms; the 66 fattest arm bodies move to topic
methods. Arm set preserved exactly (384 -> 384).
- scene/mod.rs (9017) -> scene/{mod,entity,tess,hittest,layout,paper,
mspace,project,selection,modify,group_layer,preview}. The impl Scene
body is split across files via inherent-impl-per-file; struct, ctor,
fields and load-time helpers stay in the root. fn count 123 -> 123.
- app/commands.rs (6082) -> app/commands/* grouped by command family.
The 233-arm dispatch match becomes source-ordered per-family
dispatch_* handlers, preserving first-match precedence (233 -> 233).
- app/view.rs (4686) -> app/view/{mod,overlay,modal,viewcube,controls}.
Largest file drops from 9650 to 3343. Builds clean; app launches and
loads plugins with no panic.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ramox81