A focused text field reports Status::Captured, so the key dispatch
dropped SPACE and a CUI rebind of SPACE to FINALIZE never ran while the
command line held focus (#1710). Dispatch a captured SPACE as a shortcut
only when SPACE is bound to something other than COMMANDSPACE, so the
default binding still types a space. The closure stays a plain fn, so a
static flag mirrors the binding and is refreshed wherever the bindings
change.
rename_style_storage and rename_symbol rewrote entities and table rows but left dimtxsty stale, so the next Apply resolved a NULL handle. The follow now lives in both shared functions; the plugin workaround is removed as redundant. Tests: text_rename_follows_dimtxsty drives the manager path (RED first); pre-existing plugin rename test stays green via the shared path. Full suite: 2015 passed / 0 failed / 25 ignored.
- Pins: codec 8189f83, kernel a82f17d, graph d3558bb (all manifests and
the python plugin lock).
- MASSPROP reports volume, centroid, inertia, products, radii of
gyration and principal moments of 3D solids and bodies from their
B-rep (exact where analytic, else from a fine mesh).
- OFFSET of ellipses and splines through the kernel's curve offset.
- FILLET between circles, ellipses and splines through the kernel's
curve-curve fillet, trimming arcs and open splines to the tangents.
The kernel bump brings the DWG ACIS audit fixes: slices, booleans and
press/pull on cones, slanted cylinder sections, survey coordinates,
spline walls and touching parts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- refresh_associative_sweeps runs on every edit and scanned the xdata of
every entity; it now returns at once when no associative swept surface
exists (its application is not registered) and looks at surfaces only.
- An arc's end angle was raised by TAU in a loop, which never ends on a
huge angle from a damaged file; the sweep is taken with rem_euclid.
- The sweep DELOBJ test expected surface sweeps to delete their sources,
which #1663 changed on purpose: an associative surface keeps them.
- codec c9ffcac (opencadcodec #103) adds an explicit viewport-off bit: the
viewport on state is read with is_on() and set with turn_on()/turn_off()
everywhere, so a viewport the file marks off shows off and can be turned
back on from Properties.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PURGE repeats until a pass removes nothing. A drawing whose complex
linetypes use shape files carries unnamed STYLE records for them; the
table holds those under keys the empty name does not reach, so every pass
listed them again and removed nothing, and the loop never ended.
- Unnamed and shape-file styles, and styles a complex linetype reaches by
handle, are never listed for purging.
- In-use checks compare names case-insensitively, as the tables do, so a
layer, style or linetype referenced as WALL is not purged as Wall.
- Counts are what the tables actually removed, and a pass that removes
nothing ends the loop.
Fixes#1662
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
- UPDATEFIELD stays the command main already had (Select objects, undo,
locale strings); it now takes the PR's reach — a block reference's
attributes and block definition, a table's cell texts — and reports
the fields that really changed. The PR's second implementation and its
duplicate registration are gone.
- FIELDEVAL's range error goes through the locale catalog.
- Field boxes: no slicing inside a character, one layout per multi-line
attribute, and TEXT boxes scale about the annotative reference point
like the glyphs do. Comment and indentation put back where they belong.
- bump_text_hosts classifies every host in one pass over the drawing
instead of scanning all layouts and blocks per host.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A blank script line outside a command repeats the last command through
dispatch_command, as the command line's empty Enter does.
- ZOOMFACTOR bound docs describe the SETVAR range the PR widened, and the
test keeps checking the value the Options field reaches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dynamic-input fields take ' and " and read 2'9" / 3' as lengths (#937)
- STRETCH on a selection made by a crossing window stretches through that
window and goes straight to the base point (#1068)
- STRETCH's crossing-window steps show no coordinate boxes (#657)
- Collapsed ribbon panel titles wrap at words, never mid-word (#920)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Table cell fields show their stored value; only formula cells evaluate
live. UPDATEFIELD on a block reference also updates the fields of its
block definition, and on a table the fields of its cells; a changed
table cell text redraws the table. The FIELDDISPLAY box is placed from
the text layout (MTEXT layout cells, TEXT / attribute pen advances) and
spans 0.345 text heights below the baseline to 1.19 above it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MTEXT draws its stored text instead of re-evaluating fields on every
redraw. Fields update on their evaluation events as the reference does:
open (1), save (2, not autosave), plot (4) and REGEN/REGENALL (16), each
masked with the drawing's FIELDEVAL (variable dictionary, 0-31, with the
reference's prompt and message), and the new UPDATEFIELD command
(selection, attributes of selected block references, "N field(s)
found." / "N field(s) updated."). A Date field (on demand only) keeps
its value until UPDATEFIELD. The FIELDDISPLAY gray box now covers each
field's own glyphs, one box per line it spans, instead of the whole
text. Codec moved to the update_fields / field_spans revision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- SSM* / SS* sysvar messages and the Place on Sheet prompt go through
t!/tf!, reusing the existing catalog entries where they exist; one new
key (integer range) is translated in all 21 locales.
- The SETVAR prefix is matched case-insensitively.
- The stale "SHEETSET ... not yet implemented" key is removed from the
catalog and every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Restore the web no-op of `sync_drawing_locks` and keep
`stamp_sheet_set_data` (called only by the native save) out of the web
build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Invalid Area "Undo" reverts the step that lost the boundary (redo after
an undo, undo otherwise), checks the boundary is back and otherwise puts
the step back and continues without the area; no auto-undo loop.
- COUNTCLOSE / area replacement remove the count polyline outside the
history instead of as an undo step of their own.
- UPDATEFIELD re-evaluates the field texts of a table's *T block and
reports the number actually updated.
- Zoom to a counted object goes through the f64 handle_zoom_to_window.
- Palette: SVG icons instead of glyph text, list cache keyed by tab id,
cached result borrowed instead of cloned, "Count" as the source text.
- Command-line messages go through t!/tf! with entries in all locales.
- Cleanups: \n escapes, area comment, unused parameter, comment order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- refresh_table_block no longer runs for every table change: only tables
whose picture reference this app dropped while editing them (and new
tables without one), never on appearance-only bumps. Moved, restyled or
freshly opened tables keep their authored *T block. TABLE edits now drop
the picture reference like the other table edit paths.
- set_count_display recolours just the handles whose count class changed
(restyle path + recolor_meshes_for_handles); only entering or leaving
count mode rebuilds the whole drawing.
- Count colouring keeps insert instancing: counted and duplicate wires get
their own instance groups instead of dropping render_instance.
- The hatch backdrop takes the count colour too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wizard's folder scan, Import Layout as Sheet, the template layout
lists and the drawing cache behind Model Views, Place on Sheet, callout /
label blocks and block previews parsed whole DWGs on the UI thread. They
now go through the shared `background_task` worker: a cache miss reads the
drawing and handles the message that needed it again. Block previews lend
the cached drawing to the preview scene instead of cloning it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Place on Sheet gives its viewport a unique id (shared
`Scene::next_viewport_id`, also used by the normal viewport commit).
- Renaming a sheet's layout in an open tab records undo and marks the tab
modified; in a closed drawing the previous file is kept as `.bak`
(ISAVEBAK) before it is written back.
- New Sheet saves the drawing before the `.dst`: a failed save leaves no
sheet behind.
- Rename & Renumber Previous/Next no longer panics on an empty list.
- Leftovers: unused binding, a hard-coded localized Documents path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A VIEW record's centre is an offset from its target in view coordinates.
Views saved by earlier versions stored the target itself as the centre;
treating that as an offset put them (and VIEW plots) at about twice the
coordinates. One shared `named_view_center` now resolves the centre in
f64 (DVec3/DQuat), taking a centre equal to a non-zero target as the old
convention; VIEW RESTORE, the view plot window and Place on Sheet use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `.dst` read/write go through native-only helpers (a browser answers
"Not available"); the folder pickers are web no-ops; time stamps use
iced::time (web-safe).
- Lock files are written only for drawings that are sheets of an open set,
released when the last set closes, and a lock a crashed session left
(recorded with its process id, same user and machine) is taken back.
The `.dwl2` header is well-formed and the date line comes from the OS
long date on every platform. The 1 Hz poll runs only while a set is open.
- Refreshing sheet set fields never stores `####`: fields no open set
resolves keep their value, and only the hosts that changed are redrawn
(and their tab marked modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A drawing's sheet set fields are refreshed when it opens with sets loaded.
- VIEW WINDOW <name> <x1,y1> <x2,y2> saves the plan view of a window.
- opencadcodec: block-attribute fields use their block reference's layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Row menus open Set category / Place Callout Block as fly-out submenus
(hover or right press; leftwards when the palette is docked right).
- List of Blocks and Select Block show the Blocks palette's preview.
- VIEW SAVE keeps the window's width/height ratio.
- Placing view content in model space is refused with the reference message.
- Drawings read for views, placement and blocks are cached by modification time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Turning a 141k-entity layer off/on took 1.5-5 s; it now takes ~0.6-0.9 s.
- Off/freeze toggles go through invalidate_layer_visibility: entities on
the layer keep their tessellation memo (visibility gates them before
tessellation); only block users re-expand. No mesh recolor.
- The resident patch reuses a surviving memo entry instead of
re-tessellating, guarded by the same display-context hash as the full
build.
- The patch looked up `layout.order` linearly per re-shown entity, which
made turning a big layer back on quadratic.
- recolor_meshes_for_handles resolved materials for handles with no mesh.
- Wire arena: a hidden slab keeps its instances and sets a `hidden` flag
in its consts (collapsed in the vertex shader); an unchanged re-show only
clears the flag. Const writes are batched into merged spans.
- The `layer_visible` automation action indexed the document's layer
table instead of the sortable panel rows the Layer* messages use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- When the count area's boundary is gone the approved Invalid Area dialog
asks: undo the change (also its X and Cancel) or count all of model space;
"always" keeps the choice in the settings. An edited boundary moves the area.
- A table's *T block is brought up to date whenever the table changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model Views lists named model views and places them on the current sheet
(xref, viewport, paper-space named view, view label with navigation
fields, sheet view record); sheet view rows get Display, Rename & Renumber
View, Set category, Place Callout Block and Place View Label Block; the
View Category dialog's Add Blocks opens List of Blocks / Select Block; a
sheet whose relative path is gone shows missing; sheet set fields store
their values when a set changes; named views keep their centre relative to
the target. Codec pin moves to the revision with these field helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import Layouts as Sheets shows the reference's statuses (already part of
a sheet set / may belong to another sheet set / available) and Browse
replaces the list; the Field dialog SheetView tree lists sheet views with
their properties, scale formats and hyperlinks; drawings open in tabs get
.dwl/.dwl2 lock files that other instances read as open; the codec pin
moves to the revision with sheet views and the default output folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
theluckystrike