Cargo: codec d36331d, kernel 60f086b, graph 74aac56.
The table model and its file codec now live in `codec::plot_style`
(opencadcodec#53) and are re-exported here. What stays is where tables
come from: the plot styles folder, the session registry, the shipped
tables, and saving to disk, as the `PlotStyleTableExt` trait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Gradient stops keep their DWG color book name and book; RGB wins over
ACI in a DXF gradient block in either tag order.
- MTEXT decimal tab stops keep their alignment character.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DXF values read into exactly sized strings (codec #114): reading a
DXF in the web worker no longer spends most of its time in malloc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
Per the upstream review of the XDATA-based storage: the host no longer writes
its own state into the saved file. The marker record under the host-owned OCS
APPID, the on-first-use APPID registration and the verbatim-EED rewrite
handling are removed; the single source of truth is a scene-scoped in-memory
set of entity handles (Scene::reference_only) that dies with the drawing tab,
so a reopened file starts undesignated and the owning plugin re-marks on the
document-opened notification.
All behaviour sites are unchanged, driven by the set: the wire stamp moves
from an XDATA read to a set lookup threaded through the tessellation
pipelines (tessellate_entity and the dimension text path take the handle set
as a plain parameter), and the pick filters, selection retains and
update/erase refusals read Scene::is_reference_only.
Undo keeps the entity-write contract: set mutations are recorded as explicit
first-touch before/after values on each history delta (the parametric-
constraints channel pattern). A designation inside a plugin push_undo scope
joins it, a scope-less change is one step of its own, an idempotent re-mark
records nothing, erasing a designated entity drops the set entry with the
entity, and undo/redo restores entity and designation together.
The round-trip test is inverted: reference_only_designation_is_not_written_
to_dwg_or_dxf now asserts the marker appears in neither format's bytes, that
no OCS APPID or marker record survives a reload, and that the designation
stays live in memory.
Viewport stacking rank kept apart from its ID in DXF; a layer's method-0
transparency reads as opaque.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save records the entered model viewport (or the sheet) as the layout's
last active viewport, and opening the layout enters it again with its
UCS. Picks up the codec fix that kept a last-active link from being read
as the sheet viewport (codec d57097c, kernel b40fa59, graph 2360341).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picks up the DXF fix for MTEXT without group 41, which wrapped at a
default width of 10 (#1739).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brings in the merged codec PRs (XCLIP transforms in the reference order,
table entries added after load get handles in DXF, default APPID handle
collision, viewport ShadePlot and grid flags) and the kernel's sweep and
off-plane revolve work.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
codec reads the line curve of edge action parameters, which carries the
row axis of associative rectangular arrays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HostApi gains set_reference_only(handle, reference_only): a plugin can
designate display geometry it owns and refreshes. The entity renders like any
other, but the built-in edit paths treat it like an entity on a locked layer,
while the owning plugin keeps full write access (update, erase, XDATA).
- Appended at the trait tail with a refusing default so plugins keep compiling
against older hosts; the loader gate range is untouched.
- IPC: SetReferenceOnly / SetReferenceOnlyResult round-trip through the
shared dispatch, the V3 client and the V4 client, with the shared document
cache invalidated on success.
- build.rs version_info and manifest API_VERSION bumped to 9 in lockstep.
- Evidence: reference_only_request_and_response_roundtrip (bincode round-trip
of the request and both response payloads).
Delegate INSERT and MINSERT explosion to the document-aware codec implementation, removing duplicate attribute and base-point handling. Update workspace, kernel and graph pins together and cover rotated arrays with a nonzero base.
A headless plot with plot_style loaded the layout's stored page setup,
which put the layout's CTB back in place and, when that file was not in
the plot styles folder, failed the plot with "not loaded". The
requested table now stays active for every page.
Bump codec ddf0fd2 (viewport on state from DXF group 68, so viewports
written without bit 0x8000 show their contents), kernel b80079a,
graph 45c9649.
Refs #1739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A layout plotted by window drew its sheet at the paper-space origin, so
the title block sat on the grey background away from the paper. The
sheet now centres on the plot window, or sits at the plot offset from it
when the plot is not centred.
Bump codec 8aa574a (polyline vertices in owned-handle order, which fixes
self-crossing viewport clip boundaries), kernel d79bb30, graph 4810ee0.
Fixes#1678
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Re-authored constraint-group geometry dependencies carried an empty
persistent subentity id, which crashed strict readers loading the file;
they now name the whole curve with a single-edge id.
Bump codec bc350f2 (declare classes of objects added to pre-R2004
drawings), kernel e692b97, graph 37d38eb.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The codec keeps dynamic-block, associative and material records intact on
DWG save (strict readers rejected re-saved drawings at BLOCKSCALEACTION,
associative action bodies and MATERIAL records). A checker material
texture no longer rewrites the native map source, so a map with a
procedural texture counts as content whatever its source says.
Valuable parts of #1671 (with opencadcodec#100): measured on 235 sample
drawings re-saved after an edit, a strict reader now rejects 4 instead
of 7; the remaining 4 are R14/R2000 tables, which the PR codec also
fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The internal per-call push_undo fractured plugin-composed operations:
history has no nested scopes, so each push finished the plugin's
still-pending scope and opened its own — an operation of several
writes became several undo steps and the plugin's label was lost
(measured: 3 creates + update + delete in one scope = 5 steps).
Follow the entity-write contract instead: a mutation inside a
plugin-opened push_undo scope joins it, so the whole operation is a
single undo step under the plugin's label; a scope-less mutation opens
and finishes its own scope, keeping one undo step per call; refusals
record no undo step in either regime. Document the contract on the
trait methods and the host docs; the composition experiment becomes
the permanent xrecord_writes_join_a_plugin_initiated_undo_scope test.
Add create/read/update/delete/list for XRecord objects under
named-object-dictionary paths to the plugin HostApi, with five additive
PluginRequest/PluginResponse variants, dispatch through the shared
handler, in-process HostSession methods and both out-of-process proxies.
- dictionary paths walk from the NOD root; create seeds missing
dictionaries (ensure_image_dictionary bootstrap) and refuses existing
names; update refuses missing ones; refusals precede the undo step
- entry group codes validated (1..=369, never 5/105); payload content is
the plugin's own
- each mutating call is one undo step: the pending history snapshot
restores the objects map byte-exactly, auto-created dictionaries
included (tested)
- typed entries survive DWG and DXF write/reload round-trips (tested);
update drops verbatim raw bytes so saves emit the new content
- bump API_VERSION 7 -> 8 with the build.rs version_info in lockstep,
mirroring the v7 addition; MIN_SUPPORTED stays 3
- Pins: codec 8189f83, kernel a82f17d, graph d3558bb (all manifests and
the python plugin lock).
- MASSPROP reports volume, centroid, inertia, products, radii of
gyration and principal moments of 3D solids and bodies from their
B-rep (exact where analytic, else from a fine mesh).
- OFFSET of ellipses and splines through the kernel's curve offset.
- FILLET between circles, ellipses and splines through the kernel's
curve-curve fillet, trimming arcs and open splines to the tangents.
The kernel bump brings the DWG ACIS audit fixes: slices, booleans and
press/pull on cones, slanted cylinder sections, survey coordinates,
spline walls and touching parts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SWEEP: base point from the path; kernel sweep validity fixes
The fork pin the PR carried ([patch] to ramox81/cadkernel 30b3810) is
resolved to upstream instead: kernel 99b6b48 (opencadkernel #78-#83),
codec c9ffcac (opencadcodec #102, #103), graph 7f6aae7, in every manifest.
DWG layout owners and the overall paper-space viewport read back as
written (opencadcodec#78, opencadcodec#80).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sweep history records in the reference layout.
Pins resolved to upstream: codec bff95f5 (#93, #94, #95, #96, #97 and
review fixes), kernel 6146d31 (#75 and review fixes), graph 9635ba7.
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brings codec PRs #84 (cross-version visual styles, table styles,
subentity managers), #88 (viewport clipping flag, DXF boundary handle),
#89 (DXF viewport snap/twist in degrees) and #92 (field format codes,
event updates).
With #88 a viewport keeps a stored boundary whether or not clipping is
on, so a linked boundary alone no longer means "clipped": rendering,
paper picking, VPCLIP and the Clipped property check the clipping flag
too, and VPCLIP / MVIEW Object and Polygon set it. Before, OCS never set
the flag, so its clipped viewports opened rectangular elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The codec now carries upstream acadrust 0.6.0 (foldhash, thiserror 2,
MLINE / legacy class / layer handle fixes). Its new Spline::dwg_scenario
is serde-skipped, so the Python plugin's generated entity records could
not name it; they now take such fields from the type's Default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1617 pinned the codec at ramox81/cadcodec through a [patch] block. Its
codec PR (#83) is merged upstream together with #85 and #86, so every
manifest now pins the upstream revision and the patch is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The codec writes R2018 AuxHeader maintenance fields as RL, so AutoCAD no
longer reads a 2018 save as student-made. The kernel drops zero-area
spikes before triangulating, so a hatch whose boundary folds back on
itself fills on screen instead of vanishing.
Fixes#1564Fixes#1569
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PR pinned codec and kernel to its fork through [patch]; codec #77 and
kernel #73 are merged upstream, so the patch sections are replaced by
the upstream pins (codec 8d23408, kernel d22a270, graph 9b5ae39) in this
same commit: the kernel now applies the body transform during the lift,
and an OCS without this PR's change would apply it twice. The new codec
also brings AssocCurveValue, registered with the plugin API's type
registry, and EmbeddedEntity::Body, named as a polyline profile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codec PRs #75 (field authoring API) and #76 (solid history evaluation
graphs, ACSH layouts); kernel PR #71 (sweep history with a placed profile).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codec: PRs #71-#74 merged (MPOLYGON layout, multiline ATTDEF/ATTRIB DXF,
DXF MATERIAL/ACSH matrix, restorable SAT/SAB + history roots) and issues
#55 #64-#69 fixed. EntityType now boxes Surface, Extended, Table,
MultiLeader and Helix (2344 B -> 848 B per entity): construction sites
wrap in Box, the entity traits forward through Box, and the python
plugin generator converts with into(). Kernel: PR #70 (cuboid ring
winding).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Point clouds: drawn from their scans, attached, cropped and stylized.
The fork's codec patch is resolved to the upstream pins: the point cloud
records landed in opencadcodec 5ef9376, carried through opencadkernel
68eeda1 and opencadgraph e204966.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bug:
The typed ensure_plugin_state helper and the object-safe trait method
it wraps turned two recoverable conditions into process deaths. On the
in-process host, the helper downcast the stored state with
.expect("plugin state type mismatch for plugin_id"), so registering
state under one plugin_id as one type and later asking for another
(e.g. a reloaded plugin version changes the type while the per-tab
state map survives) panicked the host. On out-of-process hosts
(ipc/client.rs, ipc/v4/client.rs) and on NullHost, the trait method
itself was implemented as a bare panic!("ensure_plugin_state is not
supported for out-of-process plugins..."), so any out-of-process
plugin calling the documented helper crashed its own runner process -
even though the sibling plugin_state_any and plugin_state_any_mut
methods on those same implementations already degrade to None
gracefully. The helper also used .expect("init called once") on the
initialiser closure.
Reproduce:
1. Out-of-process: a plugin whose runner calls ensure_plugin_state
(&mut host, "my.id", ...).
2. Type mismatch: in an in-process plugin, ensure state under one id
as u32, then ensure a different type under the same id.
3. Before: step 1 kills the plugin runner at the trait panic; step 2
kills the host at the downcast expect. After: both get None, keep
running, and existing state is untouched.
Fix:
Give the trait method a failure channel: ensure_plugin_state_any now
returns Option<&mut (dyn Any + Send + Sync)>, mirroring the sibling
plugin_state_any_mut on the same implementations, and the typed helper
returns Option<&mut T> (any?.downcast_mut). The panicking
implementations (ipc v3, ipc v4, NullHost, and the three never-called
test dummies) return None; the in-process app host wraps its real
storage in Some with unchanged insert-or-return semantics. The init
closure is now guarded by take() with a unit-Any fallback, so even an
implementation invoking it twice fails the typed downcast instead of
panicking. Object safety, argument types and vtable slot are
unchanged; external plugin sources get a compile error at the helper
and adopt Option handling on rebuild. Regression tests use catch_unwind
so they compile against both signatures: one per panic site (out-of-
process, NullHost, type mismatch), each additionally asserting the
None result and that pre-existing state survived.
The #1538 drawing's solids now draw every face: extrusion, sum and
offset surfaces and summary-only intcurves are read, vertex blends are
filled over their boundary, and the mesher closes boundaries fitted to a
few thousandths, notched cylinders and torus bands.
Fixes#1538
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Commit 98b56ef6 ('Complete Hatch host model coverage') added the hatch_geometry_and_boundaries_are_validated test without the #[cfg(feature = host)] guard, and commit f537aff7 imported codec directly instead of through crate::host::codec. This broke cargo test --workspace with 20 compilation errors because codec and the canvas validation helpers are only compiled when the host feature is active.
Fixes regression from commit 98b56ef673.
A V2 plugin passed the version gate and then failed silently while
registering its ribbon, since the ribbon wire types have moved on. The
host now loads V3 and newer, so V2 plugins are rejected up front with a
version message. The V2 compatibility fixture crate goes too.
Fixes#1085Fixes#987
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brings in the DWFFRAME/DGNFRAME header variables (codec #63) and robust 2D tangency plus ellipse-circle intersection (kernel #68). Pins opencadcodec ad16215, opencadkernel 1e02630, opencadgraph 7ef5ae4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
