Render the MTEXT background (never drawn before — the flags were only shown
read-only in the panel) and make it editable.
- Text arm emits an opaque fill_tris rect behind the glyphs: flag 0x01 uses
the entity background colour, 0x02 uses the canvas colour (a wipeout-style
mask). Box = glyph bounds padded by (background_scale - 1) × text height.
- Text frame (flag 0x10) draws a closed rectangle in the text colour around
the same box.
- Threaded `bg_color` into `tessellate()` (+ all callers and the
MultiLeaderTess trait) so the mask can use the drawing-window colour.
- Properties: "Background mask" is a Off / Fill / Mask dropdown, "Background
color" is its own colour picker (independent of the entity colour — new
PropBgColor* messages; picking a colour switches to Fill mode), and "Text
frame" is a checkbox toggle. Edits re-tessellate so the change shows live.
Renders via the face3d fill path, so the fill shows with FILLMODE on (same as
MLEADER background fill); the frame is a stroke and always shows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
With OCS_TEXT_SDF set, text now renders only as SDF quads: the wire path
skips building glyph-stroke geometry (bins stays empty, so the existing
empty-wire branch still emits the insertion snap point). This removes the
double draw (strokes + SDF) and, as a side effect, fixes the long-standing
snap pollution (#276) — snapping near text no longer catches individual
glyph-stroke endpoints, only the insertion point.
Shared sdf_text_enabled() (cached env read) gates both the collector and
the stroke suppression so they stay in lock-step. Flag off: unchanged.
Verified in-app: TEXT/MTEXT/decorations render clean as single SDF, and
snap no longer hits glyph strokes. Click-pick on text is limited while the
flag is on (no stroke geometry) pending a text OBB pick box.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A HATCH was emitting its boundary as a dense outline polyline in the
wire set on top of its fill. On hatch-heavy drawings that outline was
the dominant wire-instance cost — 14.9M of 19.1M segments on the #131
sample — and on integrated GPUs (shared system RAM) the per-segment
instances pushed memory past the OOM threshold on open.
Skip the outline in `tessellate`: hatches render as a fill, are
highlighted by their fill tint when selected (#71), and are still
picked by their fill area via the existing `click_hit_hatch` path, so
nothing else depends on it. Wire segments drop ~78% on the sample.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Text elements previously rendered as hollow wireframe outlines and sometimes
fell back to the wrong system font due to case-sensitive exact matching. Also,
the viewport background grid drew on top of solid entities.
Case-insensitive and partial-name fallback matching (e.g., mapping "arialn"
to "Arial Narrow") is now added to `sysfont::canonical_family_name`, ensuring
text resolves to the correct installed system font.
TrueType font contours are now triangulated into solid fills (`fill_tris`)
using `lyon_tessellation` in `ttf_glyph.rs`. To prevent the GPU from misclassifying
this 2D text as a 3D mesh (which broke flat shading), text tessellation splits
the output into separate outline and fill `WireModel`s.
The background grid is extracted from `SelectionCanvas` into `GridCanvas` and
moved beneath the 3D viewport to ensure proper layering. Finally, `DepthBiasState`
is enabled on all face/fill pipelines to apply a polygon offset, perfectly
resolving Z-fighting between coplanar wireframe lines and solid faces.
Two issues in a file whose dimensions carry baked *D### blocks.
Missing diameter text: the baked MText values are "\U+220520" /
"\U+220510" — the \U+2205 (⌀) escape immediately followed by the literal
digits "20"/"10". The MText parser read up to six hex digits for a \U+
escape, so it greedily consumed "220520" = 0x220520, which is past the
maximum code point, char::from_u32 returned None, and the whole text
dropped. A \U+ escape is exactly four hex digits; read four so the symbol
decodes and the trailing digits stay literal. (Angular "90\U+00B0" only
worked because its escape sits at the end of the string.)
Node artifacts: PDMODE=0 points were drawn as a fixed 0.1-world-unit "+",
which in a small drawing turned the 31 dimension def-points on the
Defpoints layer into visible crosses. Size the dot from world-per-pixel
(~1 px, zoom-adaptive via the tessellation cache key) to match the near-
invisible dot other CAD apps draw.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
In the files where ox/oy/oz came solely from the now-zero offset
destructure (tessellate, block_cache, dimension, leader, text_support),
remove the `let [ox,oy,oz] = [0,0,0]` binding and the `- ox` arithmetic so
the coordinate math reads as the plain absolute value it now is.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Now that geometry reaches the GPU/CPU as absolute coordinates via the
double-single relative-to-eye path, world_offset is always [0,0,0]. Strip
the parameter that was threaded through the whole tessellation / block-
expansion / fallback / camera-decode chain and the ExpandCtx field that
carried it — ~340 references across 20 files, all subtracting zero.
- truck_tess: to_local / to_local_low / tessellate_* drop the offset arg;
to_local is now a pure double-single split.
- tessellate: offset_to_ds → points_to_ds (pure DS split); tessellate(),
tessellate_entity(), fallback_geometry(), solid_wire_fallback(),
entity_aabb(), expand_insert(), expand_block_meshes(), the dimension
helpers (vec3_local, dimension_snap_pts, …), text_support, leader,
multileader, image_model, xclip and camera_from_view all lose the param.
- block_cache: ExpandCtx loses its world_offset field.
- Remove the now-dead offset_snap_pts and the unused set_grid_snap.
Behaviour is unchanged (the offset was zero everywhere); the compiler
verifies every call site.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two UTM-scale rendering defects.
- UCS icon jittered: it projects only axis DIRECTIONS but went through the
full view_proj, whose ~5.7e6 translation cancels catastrophically in f32.
Feed it the rotation-only view_proj_rte instead (translation dropped).
- Fallback outline geometry (hatch boundary, viewport/insert/ole2frame
frames, Solid3D edge wires) built absolute f32 points with an empty
points_low, so at UTM the outline sat ~0.5 m off its own fill (the hatch
fill renders precisely via the world_origin-relative HatchModel pipeline).
FallbackGeometry now carries absolute f64 points + key vertices; the
tessellate dispatcher splits them into the double-single high/low pair the
relative-to-eye wire pass needs, so outlines land exactly on their fills.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
WireModel/LocalWire/BatchEntry key_vertices are now Vec<[f64; 3]>;
tessellation keeps them in f64 (no f32 cast at offset subtraction),
producers (dimension, leader, multileader) build them from the acadrust
f64 source, the block-cache transform keeps f64, and the face3d Face3D
quad path splits them into the double-single (high, low) pair. Consumers
(snap endpoint/midpoint, xclip) read via f32 at the leaf. Still
offset-relative (inert); endpoint/midpoint snap is no longer f32-capped.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
TruckEntity.snap_pts is now DVec3 and every entity producer builds snap
candidates straight from the acadrust f64 coordinates instead of casting
to f32 first (text, mtext, arc, circle, ellipse, point, shape, solid,
mline, mtext, attribute, tolerance, table, underlay, ole2frame, mesh,
multileader, dimension, block-cache). offset_snap_pts stays f64
throughout. Still offset-relative (inert) — but snap precision is no
longer capped at ~0.5 m by an early f32 cast, which fixes a latent
UTM-scale snap error and sets up the absolute-coordinate switch.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
WireModel/LocalWire/TruckEntity snap buffers and the producers/consumers
now carry snap candidates as DVec3 (offset_snap_pts, dimension/multileader
producers, block-cache transform, pick/xclip, snap module). Still
offset-relative, so behaviour is unchanged — this just lets the snap
transport survive the upcoming switch to absolute coordinates without an
extra f32 quantization. The snap module still resolves in f32 (as_vec3 at
entry), matching today's precision.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Vertices now carry the low residual alongside the high half all the way
to the GPU: tessellation splits the offset-relative f64 coordinate into
(high, low) f32 (TruckTessResult::Lines/Point, the Text path, Lines /
SegmentedLines, and the block-cache instance transform), WireModel and
the block batch carry a paired points_low buffer, WireInstance gains
pos_a_low/pos_b_low (locations 10/11), and wire.wgsl reconstructs
rel = (pos_high - eye_high) + (pos_low - eye_low).
This is the piece the camera-only RTE was missing: at UTM-scale
coordinates the single-f32 vertex was quantized to ~0.5 m, so it snapped
each time the eye crossed an f32 boundary on pan. With the low half the
position is exact and the cross-drawing-paste jitter is gone.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Points could only render as a 1px dot — no way to change PDMODE/PDSIZE.
- PDMODE / PDSIZE commands set the header value and rebuild the glyphs.
- DDPTYPE opens a Point Style dialog: a 5x4 grid of rendered glyphs
(shape x enclosure), a size field, and relative/absolute radios.
- Relative (<=0) PDSIZE now sizes from the current world-per-pixel so the
marker stays a roughly constant on-screen size across zoom, rebuilding
on zoom via the existing camera-generation cache key. Absolute (>0)
scales with the world as before. Switching to absolute with a zero size
seeds a positive value from the on-screen size so it stays representable.
Part of the #100 extensibility epic (point style surfaced in #106).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
