Two rendering defects surfaced on the budweiser benchmark drawings, both
tied to a drawing's annotation scale.
Annotative scale representations. A drawing may materialise each annotation
scale as its own object (here a block insert per scale, on a "0 @ <scale>"
layer, each carrying a per-object AcDbContextData bound to one scale).
Nothing filtered them, so every scale drew at once — a 1× copy stacked
under a 10× one. Add annotative::annotative_offscale and apply it in the
three paths that expand block content: the wire block-defn cache, the
resident/top-level visibility gate (model space only — paper viewports use
their per-viewport frozen scale layers), and the exploded-insert hatch/fill
walk (filtered before normalize strips the handle). An object is shown when
a representation matches the current scale; the off-scale ones are hidden.
When the current scale is unsupported by any representation, fall back to
the base "1:1" copy instead of hiding everything (the object must not
vanish) or showing everything (the copies must not stack).
Model-space linetype scale. PSLTSCALE (a paper-space flag) was applied to
model-space linetypes via the annotation scale, so a drawing saved at e.g.
CANNOSCALE 10:1 drew its linetypes 10× off. Thread a `paper_space` flag
through tessellate_entity and gate the PSLTSCALE factor on it, so it only
scales linetypes for content shown inside a paper-space viewport; model
space keeps LTSCALE × CELTSCALE.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A dimension bakes its geometry into a per-instance *D block, offset into
the owning block by the dimension insertion_point. When that dimension
sits inside a block (INSERT → block → Dimension → *D), only its top-level
form drew; nested it rendered nothing, and once the lines/text/arrow
outlines were routed through the block cache the arrowhead FILLS were
still missing:
- 2D SOLID arrowheads: block_cache's Dimension arm now expands the *D
block, translating each sub by insertion_point (WCS → block-local) and
routing Insert subs through build_nested_ref, others through
tessellate_sub_local (which emits the solid fill_tris).
- Insert(hatch) arrowheads (custom arrow blocks = LwPolyline + Hatch):
the hatch renders via the separate GPU explosion path, which only
descends INSERT→INSERT→Hatch trees and so never reached a hatch behind
a Dimension. block_has_hatch now recurses through a Dimension into its
*D block, and the fill explosion's new explode_including_dims lifts
each dimension child's *D content into the owning block's frame
(translate insertion_point, then apply the insert transform) so its
arrow inserts / hatches ride the normal walk.
Table *T baked blocks get the mirror treatment in block_cache.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A constant ATTDEF renders as block content, but with an empty default
value there is nothing to draw — the ATTDEF tessellator would fall back
to its tag-placeholder preview (meant for standalone definitions), so
blocks showed the literal tag text where AutoCAD shows nothing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extends the wide-polyline shader band to the two cases the first pass left on
the hatch pipeline.
Polyline2D:
- A flat wide Polyline2D now draws its band from the centre-line wire
(`world_width`), same as LwPolyline (`polyline_band_width` handles both).
- A thickened wide Polyline2D extrudes a solid 3-D tube. `thick_wide_band`'s
body moves to a shared `common::thick_band_tube(origin, fills, thickness,
normal, to_wcs)`; LwPolyline delegates to it and Polyline2D calls it from
its thickness path. Tube edges read black for both kinds.
- The model-space wide-band hatch loop is deleted (both kinds now wire/tube).
Blocks:
- Block-internal wide polylines draw the shader band too. `LocalWire` carries
`world_width`; `emit_wire` scales it by the insert transform (average of the
X/Y axis image lengths) so the band tracks a scaled insert, and the scaled
width joins the batch `style_key`. `push_block_wide_fills` (the block hatch
band) is removed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A CONSTANT ATTDEF has no per-insert ATTRIB — its value belongs to the block
itself — so block expansion must draw it instead of skipping every ATTDEF.
Non-constant templates are still skipped (the insert supplies their ATTRIB).
Also bumps acadrust to decode the embedded MTEXT of R2018 multiline
attributes, so a value like "A\PB" renders both lines.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline draws a solid band, but hit-testing only ever saw the
centreline 8 px out, so a donut could only be selected by clicking the
phantom circle inside the disc it paints. `self.hatches` — the map the
hatch pick channel walks — is filled from HATCH and SOLID alone, so the
band `wide_fills` produces was drawn (via `synced_hatch_models`) and never
picked.
The band rides in on `pick_tris`, the same channel a thickness wall uses:
`wide_fills` already computes it, so it costs one tessellation and inherits
the block transform. It ear clips rather than fans — an arc band is an
annular sector, concave on its inner edge — reusing `triangulate_planar`.
Wiring `pick_tris` through `Lines` alone was not enough: a plain wide
polyline leaves `to_truck` as `Contour`, and a PLINEGEN=0 one as
`SegmentedLines`. Both now carry it.
This needs the wire's cullable box to cover the band, and it did not.
`bounding_box()` boxes a polyline's stored vertices, knowing nothing of the
width painted around them: a donut's two vertices sit on one horizontal
line, so the box had zero height and rejected every click on the disc
before any triangle was tested. Every site that stamps the entity box onto
a wire now goes through `set_wire_aabb`, which widens it over `pick_tris`
(a no-op for the entities that have none, which is nearly all), and the
block cache chains `pick_tris` into its own box for the same reason.
That box was already too small for the centreline itself — an arc leaves
the vertex box — so a donut was unselectable at its top and bottom at
enough zoom. Widening fixes that too.
Verified end-to-end: tessellate a width-0.5 donut on a 0.05 centreline
radius, then `click_hit` five points 20 px clear of the centreline — all
land, and a click outside the disc still misses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render: annotative-ness is resolved centrally in scene::annotative::is_annotative
(per-object context dictionary, legacy XDATA, or annotative style) so the bake and
the properties panel agree. Text, dimensions, tables and blocks now display at the
current annotation scale in model space. An annotative block scales as one uniform
unit about its insertion point — its internal geometry and attributes are carried by
that scale instead of being scaled individually, fixing the block-attribute size
regression. Tables scale their column/row/margin geometry.
Properties: the handle- and flag-backed rows are now editable pickers — MLEADER
multileader style / text style / arrowhead / leader linetype, General Material, and
Plot style (named plot-style mode only; the color-dependent mode stays read-only,
which is correct). A picked name is resolved back to its handle in the update loop,
where the document is in scope. Annotative Yes/No and the annotation-scale row are
shown per object.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two defects in the in-app MTEXT editor, both surfaced once the preview
text became visible:
1. Invisible preview text. After the SDF text migration, tessellate emits
glyphs as SDF quads on `text_verts` and leaves the polyline `points`
empty, but the editor preview draws on a 2D canvas that can't run the
SDF shader — so only the selection box showed. Add a `force_text_strokes`
parameter to tessellate: when set, TEXT/MTEXT run-groups also emit their
glyph outline strokes as points. The preview passes true (real stroke
font, aligned with glyph_boxes); every other caller passes false and
keeps SDF-only text.
2. Enter did not start a new line. mtext_type inserted a literal newline,
but the MTEXT layout only breaks on the `\P` code (a raw 0x0A is a break
only to the caret logic). Normalise every literal newline — from Enter or
a multi-line paste — to `\P`, so the line breaks and the saved value
stays standard.
Closes#308
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ports PR #301 (by Kevin Griffin) to the SDF text renderer. Block-nested MTEXT
with inline colour codes (\C1;, \c…) collapsed to a single colour: the block
cache applies ByBlock / layer-0 colour inheritance per entity, so at emit time
every segment's colour was replaced with the inherited colour — including
segments carrying an explicit inline override.
- block_cache tessellate_sub_local: gate ByBlock / layer-0 colour inheritance
on `wire_on_base_color` (a wire whose colour differs from the entity base
carries an explicit override and keeps it) — #301's fix, still correct for
the remaining stroke wires.
- block_cache emit_wire: the per-vertex analogue for SDF text — a glyph whose
colour equals the wire's base inherits the resolved colour; a glyph with an
inline \C / \c override keeps it. (Previously every block glyph was recoloured
with final_color, collapsing colour-split MTEXT.)
- tests/text_font_rendering.rs: restore the block colour-split regression test
(it had stopped compiling on main when expand_insert gained the InheritStyle
param) and adapt it — and drawable_point_count — to SDF text_verts, since
block MTEXT now renders as glyph quads, not colour-split stroke wires.
\C (ACI) / \c (true-colour) are parsed by acadrust (mtext_format
SpanProperties.color) → OCS InlineColor → the glyph's per-vertex colour.
Co-Authored-By: Kevin Griffin <117586586+KevinGriffin-new@users.noreply.github.com>
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two fixes for opening drawings with XCLIP'd blocks (crashed / mis-rendered
since SDF text became the default).
- block_cache emit_wire: the fill_tris/fill_tris_low length debug_assert
panicked in debug builds on a legitimate case — a Leader/dimension arrowhead
fill nested in a block carries fill_tris with an empty fill_tris_low (the
WireModel contract's "all-zero low" form, which the code already handles via
get().unwrap_or). Relax the assert to permit the empty case; a *partial* low
half is still caught.
- xclip clip_wires: also clip the SDF glyph quads. Block-internal text was
bleeding past the clip boundary (mixed batch) or vanishing (the tail retain
dropped empty-points wires). Now each glyph quad is kept/dropped by its
centroid vs the boundary (whole-glyph granularity), text_verts-carrying wires
survive the retain, and the pick-box AABB is recomputed from the surviving
glyphs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDF is the only text renderer now — the stroke path and its LOD ladder are
gone, and the remaining text kinds render as SDF glyph quads too.
- ATTDEF / ATTRIB: carry a GlyphRun so single-line attribute text renders as
SDF (multi-line already did via layout_mtext). Tolerance / complex-linetype
text already SDF.
- Remove `sdf_text_enabled()` (the OCS_TEXT_SDF flag / kill switch) and take
the SDF path unconditionally everywhere: tessellate Text arm (per-group by
GlyphRun presence), hit_test fallbacks, render gather, complex_lt, table,
mleader.
- Delete the text LOD ladder: tess.rs baseline/greek block and the
block_cache greek/baseline path (emit_greeked_text / emit_text_baseline),
plus the now-dead helpers text_baseline_points / text_greek_obb_tris /
text_obb_corners_native / mtext_line_count and the LocalWire
text_height_local / text_obb_local fields. All text is crisp at every zoom;
text entities are exempt from the sub-pixel stub cull.
- Fix a latent bug: block-internal SDF text was culled because its LocalWire
aabb_local was [0,0,0,0] (no points) — fold the glyph-quad extent into
aabb_local and exempt text_verts-carrying wires from the sub-pixel cull.
- Clear the pre-existing dead-code warnings (TextPlacement.elevation, TabKind,
MTextRunKind::Tab).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render the MTEXT background (never drawn before — the flags were only shown
read-only in the panel) and make it editable.
- Text arm emits an opaque fill_tris rect behind the glyphs: flag 0x01 uses
the entity background colour, 0x02 uses the canvas colour (a wipeout-style
mask). Box = glyph bounds padded by (background_scale - 1) × text height.
- Text frame (flag 0x10) draws a closed rectangle in the text colour around
the same box.
- Threaded `bg_color` into `tessellate()` (+ all callers and the
MultiLeaderTess trait) so the mask can use the drawing-window colour.
- Properties: "Background mask" is a Off / Fill / Mask dropdown, "Background
color" is its own colour picker (independent of the entity colour — new
PropBgColor* messages; picking a colour switches to Fill mode), and "Text
frame" is a checkbox toggle. Edits re-tessellate so the change shows live.
Renders via the face3d fill path, so the fill shows with FILLMODE on (same as
MLEADER background fill); the frame is a stroke and always shows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Entities inside a block definition that sit on layer "0" must take on the
properties of the layer the block reference is inserted on; every other
layer is "sticky" and keeps its own identity. OpenCADStudio resolved a
block child's ByLayer color/linetype/lineweight against the child's own
layer in all cases, so layer-0 content stayed layer-0 (white) instead of
inheriting the instance layer.
Resolution now follows the standard rule for block children — explicit
wins, then ByBlock → the insert's own style, then layer-0 + ByLayer →
the insert's *layer* style, else the child's own layer. The insert's
layer style threads through the whole block-expansion chain (and chains
correctly through nested inserts), with the child's own transparency
preserved.
Covered across every block-render path:
- wires (line/arc/circle/polyline/text) via the block cache + the
explode fallback + insert attributes
- hatch / solid fills (also fixes the PDF/print export path)
- 3D solid block children (per-instance mesh recolor)
- Dimension / Table baked-block sub-entities
New shared helpers in scene::view::render: InheritStyle, layer_render_style,
lineweight_to_px; render_style_for_block_sub gained the layer-0 branch.
Adds unit tests covering the layer-0, sticky-layer, ByBlock, explicit and
transparency cases.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- expand_defn: dedup the <1px baseline LOD branch the same way the <5px
greek branch does, so colour-split MTEXT no longer stacks N overlapping
baselines (one per \C segment) over the same OBB.
- sysfont: memoise canonical_family_name process-wide. resolve_font calls
it once per word on the MTEXT measure hot path and Face::resolve re-runs
it right after; the fontdb query + linear family scans were uncached.
- dimension/multileader/table: reword the 6 fill_tris_low FIXMEs. They
cited a stale line and the wrong consumer — these fills render on the
top-level path (panic-safe .get().unwrap_or), not the block cache, so
they cannot trip emit_wire's debug_assert. State the real status:
latent f32-precision debt, not a crash. Also fix the mis-indented
text-fill WireModel in dimension.rs.
- tests: add a host-independent colour-split test (two \C segments in a
block keep ≥2 distinct wire colours — guards the per-wire colour fix)
and a TTF-gated UTM fill test (paired, non-zero fill_tris_low). Note the
arial-style test's LFF-fallback limitation.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
emit_wire reconstructed fill verts via a raw `fill_tris_low[idx]` index,
guarded only by a debug_assert. Slice bounds checks are not gated by
debug-assertions, so a Leader with a filled arrowhead nested in a block
(populated fill_tris, empty fill_tris_low via the low-level tessellate
early-return) panicked in release as well as debug.
Use the panic-safe `.get(idx).copied().unwrap_or([0.0; 3])` — the same
"empty = all-zero low half" contract the other fill consumers
(face3d_gpu, xclip) already honour. The debug_assert stays as a tripwire.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Colour-split MTEXT produces one outline wire per inline \C/\c override. At <5px zoom each outline independently emitted the full OBB greek rectangle — N overlapping boxes with last-colour-wins. Track last_lod_obb and skip duplicate substitutes.
Also corrects the fill-only LOD bypass: suppress fill-only wires at <5px instead of sending them unconditionally through emit_wire. The outline sibling's baseline or greek box suffices at sub-pixel zoom.
Three related bugs in tessellate_sub_local and expand_defn:
1. Wire folding lost per-segment colour. Multi-wire tessellator output
was concatenated (NaN-separated) into a single LocalWire using the
first wire's colour. Inline \C/\c MTEXT colour overrides inside block
definitions rendered in the entity colour instead of the override colour.
Fix: tessellate_sub_local returns Vec<LocalWire>; each wire from the
tessellator becomes its own LocalWire with its own colour.
2. fill_tris_low was never forwarded. The double-single precision path
was silently degraded on cached wires. Fix: fill_tris_low forwarded
from WireModel through to LocalWire and BatchEntry. debug_assert_eq!
added at emit site to catch future invariant violations.
3. Fill-only wires hit the text LOD ladder. MTEXT outline/fill pairs
produce separate LocalWires; the fill-only wire was routed through
emit_text_baseline/emit_greeked_text which ignore fill_tris (invisible
double-draw). Fix: is_fill_only field on LocalWire bypasses the LOD
ladder. Also fixes StyleKey::fill_only being hardcoded false at both
emit_wire call sites (latent batch misclassification).
With the relative-to-eye double-single render path, the per-defn
`local_offset` precision origin is redundant: block geometry can be stored
absolute and stays precise via the high/low residual. Remove it
end-to-end:
- Drop the Pass-1 centroid computation, the BlockDefn.local_offset field,
and the `defn_lo` parameter threaded through emit_wire /
emit_greeked_text / emit_text_baseline / transform_tangent and the AABB
helper (transform_offset_aabb_xy → transform_aabb_xy), plus the nested
parent/child offset re-basing.
- Store text_obb_local as absolute f64 (was offset-relative f32) so the
greek rectangles stay precise; emit splits to double-single. Give the
greek-baseline points a low residual too.
Geometry is now absolute + double-single throughout the block cache,
matching the top-level path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The world_offset removal stripped two precision mechanisms in the block
cache that were masked while geometry was offset-relative (small coords)
but broke once coordinates became absolute UTM:
- build_defn no longer subtracted the defn's `local_offset` from the
tessellated wire (it was passed as tessellate's world_offset). The defn
was stored absolute while expand still re-added local_offset → block
lines shifted. Restore the subtraction (with a double-single re-split)
locally in tessellate_sub_local.
- Block fill triangles (greek-text rectangles, block solid fills) were
batched with f32-only `fill_tris` and an empty `fill_tris_low`, so at
UTM scale the absolute f32 quantized to ~0.5 m and the greek rects
sheared. Plumb `fill_tris_low` through BatchEntry and emit the
double-single residual from emit_wire and emit_greeked_text.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
In the files where ox/oy/oz came solely from the now-zero offset
destructure (tessellate, block_cache, dimension, leader, text_support),
remove the `let [ox,oy,oz] = [0,0,0]` binding and the `- ox` arithmetic so
the coordinate math reads as the plain absolute value it now is.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Now that geometry reaches the GPU/CPU as absolute coordinates via the
double-single relative-to-eye path, world_offset is always [0,0,0]. Strip
the parameter that was threaded through the whole tessellation / block-
expansion / fallback / camera-decode chain and the ExpandCtx field that
carried it — ~340 references across 20 files, all subtracting zero.
- truck_tess: to_local / to_local_low / tessellate_* drop the offset arg;
to_local is now a pure double-single split.
- tessellate: offset_to_ds → points_to_ds (pure DS split); tessellate(),
tessellate_entity(), fallback_geometry(), solid_wire_fallback(),
entity_aabb(), expand_insert(), expand_block_meshes(), the dimension
helpers (vec3_local, dimension_snap_pts, …), text_support, leader,
multileader, image_model, xclip and camera_from_view all lose the param.
- block_cache: ExpandCtx loses its world_offset field.
- Remove the now-dead offset_snap_pts and the unused set_grid_snap.
Behaviour is unchanged (the offset was zero everywhere); the compiler
verifies every call site.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Consolidate the duplicated paste logic and extend XCLIP-carry to every path.
- finalize_paste(): single shared step for PASTECLIP and PASTEORIG —
merge deps + block defs + xdictionary graphs, add clones (optionally
transformed), tessellate solids. A new cross-drawing concern is now wired
once instead of re-implemented per command (the gap that lost the clip on
PASTEORIG in the first place).
- recreate_clipboard_ext_roots() + recreate_ext_subtree(): PASTEBLOCK now
recreates each entity's xdictionary graph and stamps the new root onto the
wrapped entity before defining the block, so the block's nested insert
keeps its spatial filter.
- block_cache: a nested insert's clip is baked into NestedRef.clip_poly at
build time (the spatial filter isn't reachable at expand time) and applied
on expansion — the clipped wires are finalized in an isolated batch set,
clipped, and carried out via Batches.extra_wires. Single-instance only;
arrays of clipped nested inserts fall through unclipped.
All three paste paths (PASTECLIP / PASTEORIG / PASTEBLOCK) now preserve an
XCLIP clip across a cross-drawing paste.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
WireModel/LocalWire/BatchEntry key_vertices are now Vec<[f64; 3]>;
tessellation keeps them in f64 (no f32 cast at offset subtraction),
producers (dimension, leader, multileader) build them from the acadrust
f64 source, the block-cache transform keeps f64, and the face3d Face3D
quad path splits them into the double-single (high, low) pair. Consumers
(snap endpoint/midpoint, xclip) read via f32 at the leaf. Still
offset-relative (inert); endpoint/midpoint snap is no longer f32-capped.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
WireModel/LocalWire/TruckEntity snap buffers and the producers/consumers
now carry snap candidates as DVec3 (offset_snap_pts, dimension/multileader
producers, block-cache transform, pick/xclip, snap module). Still
offset-relative, so behaviour is unchanged — this just lets the snap
transport survive the upcoming switch to absolute coordinates without an
extra f32 quantization. The snap module still resolves in f32 (as_vec3 at
entry), matching today's precision.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Vertices now carry the low residual alongside the high half all the way
to the GPU: tessellation splits the offset-relative f64 coordinate into
(high, low) f32 (TruckTessResult::Lines/Point, the Text path, Lines /
SegmentedLines, and the block-cache instance transform), WireModel and
the block batch carry a paired points_low buffer, WireInstance gains
pos_a_low/pos_b_low (locations 10/11), and wire.wgsl reconstructs
rel = (pos_high - eye_high) + (pos_low - eye_low).
This is the piece the camera-only RTE was missing: at UTM-scale
coordinates the single-f32 vertex was quantized to ~0.5 m, so it snapped
each time the eye crossed an f32 boundary on pan. With the low half the
position is exact and the cross-drawing-paste jitter is gone.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Block-internal entities ignored their own layer state: 2D subs were
only filtered by the invisible flag in the block-defn cache, and 3D
solids render through a separate mesh path that applied no layer filter
at all. Both now skip subs on off/frozen layers, matching top-level
entities. Caches rebuild on every toggle, so visibility updates live.
Fixes#133
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Points could only render as a 1px dot — no way to change PDMODE/PDSIZE.
- PDMODE / PDSIZE commands set the header value and rebuild the glyphs.
- DDPTYPE opens a Point Style dialog: a 5x4 grid of rendered glyphs
(shape x enclosure), a size field, and relative/absolute radios.
- Relative (<=0) PDSIZE now sizes from the current world-per-pixel so the
marker stays a roughly constant on-screen size across zoom, rebuilding
on zoom via the existing camera-generation cache key. Absolute (>0)
scales with the world as before. Switching to absolute with a zero size
seeds a positive value from the on-screen size so it stays representable.
Part of the #100 extensibility epic (point style surfaced in #106).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
wasm32 has no threads, so rayon's global pool would panic at runtime.
Add `crate::par::prelude`: native re-exports `rayon::prelude`, wasm
provides sequential `std`-iterator equivalents (par_iter / into_par_iter
/ flat_map_iter over slices, Vec, HashMap, HashSet). All call sites now
`use crate::par::prelude::*;` instead of rayon directly.
- wire_gpu's rayon `reduce` (2-arg, no std equivalent) is cfg-split to
a sequential flat_map concat on wasm.
- rayon moves to a non-wasm target dependency.
Native still runs in parallel; all 75 tests pass. wasm bin compiles.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
