- The page transform is read as 16.16 fixed point held in single precision
and each user-space coordinate as a single-precision value kept to six
decimals, so imported coordinates match the reference to the last digit.
- Paths wholly outside the page (crop box) or the current clip are left out.
- The page's /UserUnit scales the import.
- Unreadable files (no trailer, empty, not a PDF) print the "This file
cannot be opened." block; encrypted files are asked for again silently.
- Page prompt: digits only, "There is no N in <file>." past the last page;
page list prompt keeps asking with "Please enter page number or *.".
- Automation: pdf_import_pick (the path the next PDF picker returns) and
pdf_import_dialog (page / on_screen / scale / rotation / ok / cancel).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each picked region matched every edge of its rings against every
boundary source of the drawing, twice: with 65,000 sources a click took
over 30 seconds. Sources are now narrowed to those reaching the rings'
box first, once per hatch and once per ring: the same click takes 9 ms.
Objects on layers that are turned off (not frozen) now bound a hatch, as
in the reference. Drawings switch off the layers that close the regions
to be hatched; without them a click between columns found the outer
frame instead. (#1813)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Enable the existing palette rows and BPARAMETER choices. Rotation accepts a
center, picked or numeric radius, and picked or numeric default angle.
Alignment places a tangent direction from its base point. Flip places a
reflection line and state label, with native grip and state expressions.
Extend shared graph append/capacity checks for Flip's additional state node
while preserving existing subgraphs. Keep Polar/Rotation angle labels unique
in either placement order. Add editor graphics, extents and definition
reframing through the existing overlay/history/save paths.
This milestone implements native parameter placement and persistence.
Rotate/Flip action association, reference alignment/grip editing, parameter
property editing and parameter sets remain separate work.
Validation covers command and palette placement, cancellation, local/parent
undo, save/discard, native DWG/DXF objects, existing graph preservation and
the 17 research fixtures. Broader block/dock regressions and editor renders
are also checked.
Enable the three existing palette rows and BPARAMETER choices. Pick a base,
endpoint and label location to create the appropriate native parameter, one
end grip and its location expressions in the shared authoring graph.
Render editor dimensions and labels, preserve them when reframing the block,
and include them in editor extents. Reuse local undo/redo, save/discard and
native DWG/DXF persistence. Reject incomplete or invalid placement without
changing document data or history.
This milestone implements parameter placement. Action association/evaluation,
parameter property editing, alternate grip counts and parameter sets remain
separate work.
Validation: focused placement and palette interaction checks; Block Editor and
dock regressions; native append and DWG/DXF round trips in all 17 research
fixtures, preserving existing graph data and source files; app-view renders.
Enable Point in Authoring Palettes and BPARAMETER. Pick parameter and label
positions, then create the native Point, XY grip and position expressions in
one undo transaction. Draw editor-only markers and clear placement previews.
Share graph append construction with Visibility so both types coexist in
either order. Allocate node, expression and edge IDs independently; preserve
existing objects, nodes and relationships and reject malformed/opaque graphs.
Reframe parameter, label and grip with the edited definition. Include authoring
positions in editor framing while keeping reference geometry extents unchanged.
Retain save/discard and parent saved-edit undo. Action association/evaluation
and parameter property editing remain separate milestones.
Validation: 10 targeted, 286 block and 60 dock checks passed (overlapping
filters). Appending a Point to an existing native graph passed DWG/DXF
roundtrips in all 17 local fixtures; old objects and original checksums stayed
unchanged. Real-view palette interaction and rendered marker/label verified.
Add the current-state selector, Visibility States dialog and mode/show/hide
controls to the contextual ribbon, using shared icons, tooltips, modal UI
and adaptive flyouts. Disable the controls until a Visibility parameter exists.
Stage state creation, rename, deletion, current-state changes and reordering
until OK. Support copied, show-all and hide-all new states in one undo step,
preserve native graph metadata, and restore current-state identity on undo/redo.
Implement nonsaved BVMODE and display-only reveal during BVSHOW selection.
Cancelling selection leaves saved visibility flags and history unchanged.
Keep the existing command-line state workflows available.
Validation: 6 targeted tests; 277 block, 31 app dock, 35 ribbon and 12 history
checks passed (overlapping filters). All 17 local DWG fixtures passed in-memory
DWG/DXF preservation checks with unchanged original checksums.
Milestone 1: enable Parameters > Visibility and add interactive
BPARAMETER VISIBILITY placement using the existing native visibility
parameter, grip and state engine. Bare BPARAMETER currently offers only
Visibility; other parameter, action and set entries remain unavailable.
Show the placed parameter in the editor and support cancel, local undo/
redo, save/discard and saved-edit undo. Bind placement to its document
and definition, reject duplicates and invalid points, and protect existing
authoring graphs from replacement.
Keep visibility parameters and their grips aligned with geometry when a
BEDIT UCS change reframes the definition, including parameter-only blocks.
Validation: 9 targeted tests, 272 block checks and 58 dock checks passed
(overlapping groups). All 17 local DWG fixtures passed in-memory DWG/DXF
placement roundtrips and graph-preservation checks; originals unchanged.
Adds PDFSHXTEXT with the PDF Text Recognition Settings dialog, its
command-line form, the PDFSHXLAYER / PDFSHXBESTFONT / PDFSHXTEXTSETTINGS
variables and the profile settings they are kept in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DGN V7/V8 readers expose each element (level, symbology, geometry,
complex chains, text nodes, shared cells). DGNIMPORT / -DGNIMPORT convert a
model with the Standard mapping into a new drawing; IMPORT opens the
Import File window and routes PDF and DGN files to their importers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TEXT and MTEXT objects are merged into one MTEXT (top-down or in
selection order, word-wrapped or one paragraph per object, with the
original pitch kept as line spacing) or each TEXT and MTEXT line becomes
an MTEXT of its own. The SEttings option opens the Combine Text settings
dialog; the settings persist as profile values and are exposed as the
TXT2MTXT* variables and the txt2mtxt_settings automation action.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import File split button (PDF Import / DGN Import / Import), Recognize
SHX Text, Recognition Settings and Combine Text; Land XML moves to the
panel slide-out and Open leaves the panel. Ribbon commands may be menu
macros (`;` answers the running command's prompt). KeyTips IF, PI, DI,
OI, PS, PT, TM; labels in every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Block Attribute Manager: the error band's dismiss button is the close
icon, not a "×" glyph the web build may not have.
- Two signatures wrapped to the 100-column limit.
- MCP tool schema digest updated for the new `block_def_dialog` and
`attman_dialog` actions.
- Measurement docs: MEASUREGEOM's Quick mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PDFIMPORT follows FILEDIA and -PDFIMPORT asks for the file, page,
insertion point, scale and rotation on the command line. A page with a
viewport measure is imported in its measured units. Straight polylines
that trace arcs, circles and ellipses, and runs of circular Bezier arcs
on one circle, become those objects; other Bezier curves become one
SPLINE each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add a dockable Block Editor palette with selectable Parameters, Actions,
Parameter Sets and Constraints pages, reusing shared dock controls, icons
and ribbon-style hover bubbles.
Parameters, Actions, Parameter Sets and Block Properties Table are UI
catalogs only. Their entries remain disabled; this commit does not add
parameter placement, dynamic action behavior, parameter-set authoring or
block properties table functionality.
The Constraints page connects its geometric and dimensional entries to
existing ribbon commands. It reuses their implementations and adds no new
constraint behavior.
Keep the palette specific to BEDIT and retain its placement and selected
page across closing/reopening and Test Block. Opening, closing, switching
pages and clicking disabled entries preserve the document, undo history
and any running command.
Validation: 7 palette tests, 57 dock checks and 46 ribbon checks passed
(overlapping groups); rendered pages inspected and native debug build passed.
MEASUREGEOM gains a Quick option. As the cursor moves, the nearest
drawn geometry along the working plane's X and Y lines through it is
measured live: cyan measurement lines and a Horizontal/Vertical readout
by the cursor. A click prints the current readout and keeps measuring;
Enter ends the command. The rays go through the scene's interaction
index, so large drawings stay responsive.
A structure-pick command whose miss message is empty now gets the click
as a plain point instead of an error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BATTMAN and ATTMAN open a manager for the attribute definitions of one
attributed block: block chips with reference counts and a pick button,
a table whose columns are chosen with chips, move up/down, remove, and
an edit card (Attribute / Text / Properties) for the selected row. Apply,
OK and Sync write the list back to the block definition and, when asked,
rebuild the existing references keeping values through tag renames;
each is one undo step. Live changes are taken back on Cancel. Automation
gains attman_dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Block Definition panel's Create Block is a split button listing
Create Block and Write Block; its face runs the last one chosen. The
slide-out lists Set Base Point and Synchronize with their labels, and
the large buttons read Manage Attributes and Block Editor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WIPEOUT's Polyline option took only straight closed polylines. It now
also takes a circle or a closed polyline with arc segments, sampled
every 5° into the polygon a wipeout stores, so the result stays a
standard polygonal wipeout (#641).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import AutoCAD PGP aliases and support UCSFOLLOW workflows. The UCS
conflict keeps main's click-origin flow (axis preview, Enter accepts
the placed axes) and takes the PR's prompt and option keywords.
UCS waited for an option keyword before taking any point. A picked or
typed point at the first prompt now starts the origin / X / XY
placement directly. A live L of the new X and Y axes follows the cursor,
and Enter accepts what has been placed so far: the origin alone moves
the UCS, an X point turns it about the current Z.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both commands gain a mOde option [Quick/Standard]. Quick (the default)
starts ready to pick, every object a cutting or boundary edge; Standard
starts by selecting those edges, Enter with none taking every object.
The choice is TRIMEXTENDMODE (1 Quick, 0 Standard), kept in the profile
and settable with SETVAR.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- block-def strings in every locale (English until translated); the
catalog test requires each locale to carry them.
- A new block's base point starts at 0, and ATTMAN / BATTMAN report a
drawing without attributed blocks; the tests expect that now.
- Lines over 100 columns wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Selection: report what each pick found while a command gathers objects
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# src/locale_catalog.rs
-BLOCK, -WBLOCK, -BEDIT, ATTSYNC, BASE and INSBASE follow the reference
prompts and messages; empty blocks; WBLOCK keeps object coordinates and
stores INSBASE; annotative and hyperlink data on the block record; block
preview images; remembered dialog choices; block aliases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
Every pick during object selection prints the reference's count line:
"N found" for the first pick or a pick that adds nothing, "N found,
M total" after it, "N found, N removed, M total" when objects leave the
set. It is printed before a command's own filtering, so "N were filtered
out" follows it. COUNT reports through it and the ad hoc
"object(s) found." / "object(s) added to selection." lines are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picking nested objects reports what each pick added ("1 entity added",
"0 entities added" for an object already in the set), a pick on empty
space starts a window ("Specify opposite corner:"; a window dragged to
the right takes the objects inside it, to the left those it touches),
and a typed point picks the object it lies on. From the Reference Edit
dialog the item count is printed when the session opens, followed by
"Use REFCLOSE or the Refedit toolbar to end reference editing session."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selection of several unconnected chains, or one holding a closed
polyline, failed as a whole; each chain now joins on its own and the
rest stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Create a new named definition from current session edits, restore the source checkpoint, and continue editing the copy with fresh local history. Add the name dialog and Save dropdown, clone supported owned metadata onto independent handles, and refuse unsupported relationships atomically.
