App preferences were spread across six flat plain-text files (settings.txt,
recent.txt, recent_limit.txt, statusbar.txt, ribbon.txt, plot.txt), each with a
bespoke line parser and no grouping. Replace them with a single grouped JSON,
serialized via serde (enabling the derive feature; serde_json was already a
dependency).
- New app/config.rs: AppConfig { settings, recent, statusbar, ribbon, plot } →
<config>/settings.json (pretty JSON), load()/save().
- Make UserSettings, StatusBarConfig/StatusPill, CollapseMode and
PlotDialogState serde-derived; #[serde(skip)] marks the plot dialog's runtime
fields so only print preferences persist. Their bespoke .txt load/save is
removed.
- App gains current_config/apply_config/save_config: one AppConfig::load at
startup distributes into live state; every settings-change site
(persist_settings_if_changed, recent add/remove/limit, status-bar pill
toggle, ribbon density, plot commit) routes through save_config, which diffs
against the last write to avoid thrashing.
- Clean start: the old flat files are ignored (no migration). ocad.pgp stays a
separate hand-editable file.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Coords pill always showed live absolute X,Y,Z, ignoring the drawing's
$COORDS (coords_mode) sysvar. Drive the readout from it:
- 0 static — the last picked point; the readout freezes between picks.
- 1 live — continuous absolute X,Y,Z (previous behavior, default).
- 2 polar — distance<angle relative to the last point while a command is
prompting for a point; absolute otherwise.
The cursor and last point are reported in the active UCS, matching the rest of
the readout. Clicking the pill cycles the mode 0→1→2→0 (CycleCoordsMode), marks
the tab dirty and echoes it; SETVAR COORDS still works. $COORDS round-trips per
drawing via acadrust's coords_mode.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ortho and the running object-snap set were app-global (settings.txt only) and
Isolate/Hide was a session-only view state, so none survived save/reopen and
none were per-drawing. Bind all three to the file like AutoCAD:
- Ortho -> header.ortho_mode ($ORTHOMODE); running OSNAP <-> header
.object_snap_mode ($OSMODE bitmask) via a new SnapType<->bit map in settings
(osmode_from_snaps / snaps_from_osmode, round-trip tested). The header is the
per-drawing store, live state mirrors the active drawing: adopt header->live
on open and tab-switch, stamp live->header on save and when leaving a tab, a
fresh drawing inherits the current values, and SETVAR ORTHOMODE/OSMODE now
also update the live state. settings.txt stays as the boot/new-drawing
default; the per-file header overrides it on open.
- Isolate/Hide now set each entity's persisted invisible flag (DXF code 60,
which acadrust round-trips in DXF and DWG) in addition to the session set;
End Isolation clears it. The set is reseeded from invisible entities on load
and after undo/redo, the commands are undoable and mark the tab dirty. The
renderer already skipped invisible entities, so no render change was needed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The polar-tracking pill only right-click-cycled 15→30→45→90. Add an
AutoCAD-style angle picker opened from a caret on the pill: presets
90/45/30/22.5/18/15/10/5/1 plus a free-text field for any custom angle,
mirroring the existing units / scale status-bar popups. The chosen angle
persists like the other user settings.
Factor the shared chrome into one `split_pill(main, caret_msg, active,
open)` helper (+ `pill_text_color`) so the OSNAP and POLAR pills stop
hand-rolling the same outer border, background, caret and sizing — each
pill now only supplies its own main region. The caret is sized and
aligned to sit inside the single pill border on both.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Space now acts like Enter in the command line so commands advance
token-by-token (CAD convention). The whole value is handed to the submit
path, which tokenises multi-token lines, so a pasted or API-fed
`LINE 0,0 10,10` runs each space as a step separator instead of stopping
at the first token. A leading `>` switches to literal-space mode (for a
text string, a path, etc.) and is stripped on submit. All command-line
entry is shown uppercase.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gradient Type (One/Two color), Color 1 and Color 2 editable via a generic field-keyed colour picker path. Background colour editable and stored as HATCHBACKGROUNDCOLOR extended data (group 1071 true colour), rendered in OCS as a solid backdrop drawn behind the pattern. Hide Origin X/Y for gradients (pattern-only concept) and drop the redundant gradient rows from the pattern branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Arc ribbon default + icon + dropdown order set to 3-Point. New ARC_CONT: tangent-continuing arc from the last line/arc endpoint, pick end only; Ctrl flips direction. Exit anchor recorded on commit (disambiguated by last pick) so chaining continues from the correct end.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Current Vertex row is now a ◀ / ▶ stepper (new PropValue::Stepper)
showing "i / N". Stepping it moves the panel's focus through the
polyline's vertices — Vertex X/Y and the per-vertex start/end widths show
and edit the focused vertex instead of always the first — and the focused
vertex's grip is drawn hot (filled) in the drawing so it's visible while
navigating. Focus wraps around and resets to the first vertex when the
selection changes. Adds Area and Length to the LwPolyline Geometry group
(Polyline2D already had them). Applies to LwPolyline and Polyline2D.
The focused vertex is threaded to the per-entity property builder/editor
through a dispatch thread-local (like the curve-tolerance override), so
the PropertyEditable trait signatures are unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a MANUAL_SUPPORTERS list in patreon.rs for donations that arrive
outside Patreon; both the native and web boot paths merge it with the
fetched patrons and sort the combined list by amount (highest first,
then alphabetically). This also sorts the web supporters list, which
previously arrived unordered, and keeps hand-maintained supporters
visible when the Patreon fetch returns nothing (offline / no token).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Commands now expose their step options as clickable buttons rendered
inline beside the command-line prompt, so options need not be typed.
Adds a CmdOption/options() API to CadCommand: each command returns the
options for its current step; the command line renders them as
uppercase buttons and a click feeds the keyword to the command exactly
as if typed (an empty keyword submits like Enter).
Construction commands become "central" — CIRCLE offers [3P/2P/TTR/TTT/
DIAMETER], ELLIPSE [ARC/AXIS], ARC [SCE/SCA/SEA/SER/CSA/3P], RECTANGLE
[ROTATION/CENTER], POLYGON [CIRCUMSCRIBED/EDGE] — each keyword hands off
to the existing dedicated variant command via CmdResult::Dispatch,
instead of the variants only being reachable as isolated commands.
Migrates the existing bracketed-option prompts (PLINE, PEDIT, SPLINE,
SCALE, FILLET, CHAMFER, HATCH, GRADIENT, SOLID, POINT, RAY, XLINE, TRIM,
EXTEND) to the same button API and strips the option text from the
prompt strings, keeping value/coordinate hints. PEDIT's Width option
now enters a value sub-step so the button acts on click.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render the MTEXT background (never drawn before — the flags were only shown
read-only in the panel) and make it editable.
- Text arm emits an opaque fill_tris rect behind the glyphs: flag 0x01 uses
the entity background colour, 0x02 uses the canvas colour (a wipeout-style
mask). Box = glyph bounds padded by (background_scale - 1) × text height.
- Text frame (flag 0x10) draws a closed rectangle in the text colour around
the same box.
- Threaded `bg_color` into `tessellate()` (+ all callers and the
MultiLeaderTess trait) so the mask can use the drawing-window colour.
- Properties: "Background mask" is a Off / Fill / Mask dropdown, "Background
color" is its own colour picker (independent of the entity colour — new
PropBgColor* messages; picking a colour switches to Fill mode), and "Text
frame" is a checkbox toggle. Edits re-tessellate so the change shows live.
Renders via the face3d fill path, so the fill shows with FILLMODE on (same as
MLEADER background fill); the frame is a stroke and always shows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ribbon:
- A ▾ selector at the right of the tab row picks the tool-panel density —
Auto (size to window), Full, Compact, or Collapsed. The choice is persisted.
It hides itself when the tool row is already tight, giving the cramped tab
row its space back.
Start page:
- The Recent Documents card is restyled to match the Supporters card
(rounded corners, 20px padding, matching title + colours).
- Its scrollbar no longer sits on top of the row ✕ remove buttons (a gutter
is reserved).
- A footer control sets how many recent files to keep: [-] an editable count
[+] with the max shown. Typing applies on Enter; an over-max entry snaps to
the max. The limit is persisted and enforced on load and on every open.
- The "Support on Patreon" heart is now the SVG icon instead of a font glyph.
Config:
- Add a shared `config::config_dir()` helper; the recent-files and status-bar
stores now go through it instead of each re-deriving the path. New minus.svg
icon for the stepper.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pick a rectangular window in model space with the existing PLOTWINDOW command (now enabled in model space, previously paper-space only) and export it to a PDF at a chosen ISO paper size (A4-A0), orientation and scale (fit or ratio). The window is a hard clip boundary. Adds paper-size presets, a window-to-sheet transform, scale + clip support in the PDF exporter, and Page Setup controls (format/orientation/pick window).
When the window is too narrow for the full properties panel it now
collapses to a slim vertical "Properties" bar (its label drawn rotated 90°
on a canvas), freeing width for the viewport. Clicking the bar expands the
panel back out alongside the bar; clicking it again re-collapses
(props_expanded state + TogglePropertiesBar). Reuses the rotated-label bar
helper originally built for the Start page.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rebuild the Start page as three parts — Recent Files (left), Welcome
(center) and Supporters (right) — that sit side by side while they fit.
When the page is too narrow for all three it falls back to a tab bar
(Recent Files / Welcome / Supporters) showing one section at a time, with
Welcome open by default (new StartSection state + StartSectionSelect).
The Recent Documents list moves off the left properties slot and into the
page itself. The Welcome column's button rows now flex-wrap, and the two
intro-video cards sit side by side, wrap to a stacked column when the
width gets tight, then shrink to fit the remaining height so they never
spill over the status bar. Trimmed the headline to just "Open CAD Studio"
(dropped "Welcome to" + the subtitle) and the "Release Notes" button, and
tightened the page's side padding.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
All ribbon dropdowns (tool dropdowns, undo/redo history, and the layer /
colour / linetype / lineweight / style combos) and all status-bar popups
(scale, units, OSNAP, isolate, filter, customization menu, layout list)
now open directly at their widget instead of at a layout-estimated
position, and flip to the other side when the panel would cross a window
edge.
Each dropdown/pill widget is wrapped in a transparent PosReport that
records its screen bounds into a thread-local map on draw. The overlays
read those bounds:
- Ribbon: Ribbon::dd_anchor(id, panel_w, win_w) returns
(align_right, h_pad, top); position_ribbon_dropdown places the panel
below the widget, flipping right-aligned near the right edge.
- Status bar: popup builders take (pill_bounds, win_size) and call
popup::position_statusbar_popup / popup_anchor, opening just above the
pill and flipping left/right at the window edge.
The window size is now tracked (win_size, set on WindowResized). The old
layout estimators compute_dropdown_left / compute_layer_combo_left /
compute_prop_combo_left / compute_history_dropdown_left and
osnap_popup_right_offset are deleted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Third stage of the adaptive tool area (shrink -> compact -> collapse).
When even the compact panels don't fit, DensitySwap picks a new
CollapsePanels widget that keeps a left prefix of panels inline and
collapses the rest to buttons; clicking a button opens the full panel as
an overlay flyout anchored below it (closes on outside press, mirroring
color_select's Floating).
A collapsed panel's button shows a live representative tool — the panel's
last-used tool (tracked per panel in Ribbon::note_panel_tool on every
tool click), defaulting to its first — rendered as a large icon. To
support this, render_small now also renders Large* items small and
render_large now renders plain Tool/Dropdown items large. Large dropdowns
render as icon + label + a bottom arrow strip via a shared
render_large_dropdown helper, used in both the full ribbon and collapsed
panels.
Ribbon dropdowns (tool dropdowns + undo/redo history) now anchor their
overlay directly below their widget at any size: a transparent PosReport
wrapper records each dropdown button's screen bounds into a thread-local
map on draw, and the overlays read it via Ribbon::dd_anchor instead of the
layout-estimating compute_*_left helpers.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Layer Manager already applied colour/linetype/lineweight in bulk;
extend that to the rest:
- Visibility, lock and freeze toggles now act on every selected layer, not
just the clicked row. The clicked row's new state becomes the target for
all. Transparency edits apply to the whole selection too.
- Clicking a linetype/lineweight combo on a row that is already part of a
multi-selection no longer collapses the selection (the whole row is one
mouse_area whose plain-click select would otherwise reset it), so those
edits stay bulk.
- Ctrl/Cmd+A selects every layer row while the Layer Manager is open, and
all drawing objects otherwise.
Two now-unused Scene layer-toggle helpers are removed (the handlers set the
flags directly and bump once).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Remove the OCS-logo button and the dropdown menu it opened; the top strip
now shows direct New / Open / Save / Save As / Print buttons ahead of the
undo/redo controls. Drop the HELP and OPTIONS commands (HELP dumped text to
the command line, OPTIONS aliased the drafting-settings popup).
The app-menu overlay is gone, so its rendering code, MENU_ITEMS, four dead
messages, and the LOGO_RED / GEAR / HELP assets are removed. The recents
list it held is the only survivor — moved into OpenCADStudio.recent_files
via a new app/recent.rs, backing the Start page's Recent Documents panel.
Quick-access icons are redrawn in a cleaner style (file-plus, folder-open,
device-floppy, file-export, printer) and tinted light so they read on the
dark strip; FOLDER / DOC keep their old glyphs for the file browser.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the click-to-instantly-copy read-only cell with a non-editable but
selectable text field: the user selects the value (drag / double-click /
Ctrl+A) and copies with Ctrl+C, the normal expected gesture. The field
carries the full un-truncated value, styled flat (no input box or focus
ring) so it still reads as read-only but with a visible selection colour.
Keystrokes route to Noop, so it can be selected/copied but never edited.
Removes the PropCopyValue message + handler and the mouse_area copy hook.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A read-only value cell is now click-to-copy: clicking writes the full,
un-elided value to the system clipboard (copy cursor on hover). One
change in render_ro_row, so it covers every read-only row for every
entity. Adds Message::PropCopyValue routed through iced::clipboard::write.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a right-hand rail on the Start page listing active paying patrons
(name + pledge amount, highest first) with a "Support on Patreon" button.
The list is fetched once at boot from the Patreon API in the background;
free followers, $0 tiers, declined and former patrons are excluded.
The creator access token is read at build time from OCS_PATREON_TOKEN
(option_env!), so it never lives in source or git — the release workflow
passes it from a repo secret, and build.rs re-bakes when it changes.
Without a token the rail just shows the support button.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rework 3D view navigation:
- Turntable / lock-horizon orbit: horizontal drag yaws about world +Z,
vertical drag pitches about the horizontal camera-right axis, so the
view never banks. Pitch is pole-clamped but the straight-down default
view can still be tilted out of.
- Orbit centre: the selection's centre when something is selected,
otherwise the point under the cursor — no longer only the file centre.
The camera revolves rigidly about the pivot, so it stays put on screen
and the view doesn't jump.
- Mouse scheme: Zoom = wheel, Pan = MMB, Rotate = Shift+MMB. Right-drag
no longer orbits (right-click stays context menu / Enter). Floating
viewports orbit with Shift+MMB too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Properties panel color picker is a custom bool-driven dropdown, while
Layer/Linetype/Lineweight are combo_boxes. Combo_boxes close each other on
blur, but nothing closed the color picker — so opening the Layer dropdown
while the color picker was open left both showing and overlapping.
Give every panel combo_box an on_open handler that collapses the color
picker, so at most one panel dropdown is open at a time.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Color/linetype/lineweight/layer are baked into the cached wire geometry
at tessellation time, so a property edit only repaints if the handler
bumps the geometry epoch. The color path did; several siblings only set
tabs.dirty (a save flag) and never re-tessellated, leaving the viewport
showing the stale look.
Route every handle-based edit through invalidate_property_targets
(mark dirty + recolor meshes + bump geometry), and full-bump the
name-based LAYER COLOR change:
- ribbon layer / linetype / lineweight dropdowns applied to a selection
- CHPROP (color/linetype/ltscale/transparency/layer)
- LAYMATCH (MatchEntityLayer)
- LAYER COLOR <name> <aci>
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The command-line history dropdown was display-only, so users had to
screenshot and OCR the log to report output. Make it copyable:
- Render the whole backlog in one read-only text_editor so a single
mouse drag selects across lines and Ctrl+C copies the span.
- Add Copy (whole log to clipboard) and Clear buttons to the dropdown.
- Gate the Ctrl+C/X/V accelerators on event Status::Ignored so a focused
text widget's copy/cut/paste wins instead of firing COPYCLIP/CUTCLIP;
the drawing's clipboard shortcuts still work when it has focus.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Layer Manager only allowed one layer at a time. Now:
- Ctrl/Cmd-click toggles a layer in the selection; Shift-click selects
the range from the anchor; a plain click selects just one.
- Colour, linetype and lineweight changes apply to every selected layer.
- Delete removes all selected layers at once (reusing the #237 non-empty
warning, now pluralised); layer "0" and the current layer are skipped.
Selection is stored as row indices but re-resolved by name across sorts
and layer-table rebuilds, so it never points at the wrong rows. Modifier
state is tracked via a new SetModifiers message (shift + ctrl/cmd).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Deleting a layer only dropped the layer record, leaving its objects in the
file still tagged with the (now-gone) layer name. Now:
- Empty layer → deleted straight away.
- Non-empty layer → a warning modal ("Layer X is not empty — N objects;
deleting also removes them. Continue?") with Delete Objects / Cancel.
Confirming erases every object on the layer, then removes the layer, as
one undo step. The layer record is dropped before the erase so the
locked-layer guard can't keep its objects.
- Layer "0" and the current layer can't be deleted (reported on the
command line) instead of silently leaving a broken state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The selection-filter popup now has the same Select All / Clear All header
as the OSNAP popup: Select All clears every exclusion (all types
selectable), Clear All excludes every present type. Each button disables
when it would be a no-op.
Also remove the "Object Snap Settings…" footer from the OSNAP popup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grow the attribute editor into a three-tab enhanced editor:
- Attribute: the tag/prompt/value list; click a row to select it, edit
its value below.
- Text Options: the selected attribute's Text Style, Justification,
Height, Rotation, Width Factor, Oblique Angle, Backwards, Upside down.
- Properties: the selected attribute's Layer, Linetype, Color,
Lineweight (the colour list also surfaces a non-standard current
colour so it displays and round-trips).
Applying writes value, text-formatting and common-property edits back to
each attribute positionally (guarded on block name + count), with undo
and a repaint. OK/Cancel are replaced by a single Apply button in a top
toolbar that commits but keeps the dialog open, matching the other modal
windows — the frame ✕ closes and discards un-applied edits. The frame
adopts the shared style-window palette, tab styling and sizing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Each row in the attribute editor now shows the attribute's prompt — the
text defined on the block's ATTDEF — falling back to the tag when the
block defines no prompt. The prompt is read from the block definition,
since attribute instances carry only tag + value.
Bumps the acadrust pin to pull the matching reader fix: its DWG object
reader was discarding the ATTDEF prompt, so every prompt came back empty.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selecting an INSERT with attributes now adds an editable "Attributes"
section to the Properties panel — each tag is a row whose value can be
changed inline (Enter commits, undo works, the attribute text repaints).
Previously attribute values could only be reached through ATTEDIT, which
didn't let them be changed (#192).
Attribute tags are runtime strings, so they can't ride the geometry
edit path whose field key is `&'static str`; a dedicated PropValue::
AttrText variant plus PropAttrInput/PropAttrCommit messages carry the
tag. Values are stored verbatim (no expression evaluation, since
attribute text is free-form).
Also guard the panel's in-progress edit buffer: it now only carries
across a rebuild when the selection is unchanged (a commit-triggered
refresh), so a typed-but-uncommitted value can't display or commit onto
a different entity — e.g. two title blocks sharing a REV1 tag. This
closes a latent stale-buffer leak that affected geometry fields too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Layer color/linetype/lineweight and MATCHPROP edits set the
document dirty flag but never bumped geometry_epoch. The wire
caches key on that epoch and bake a ByLayer entity's resolved
color at tessellation time, so they returned stale wires until
a new entity forced a rebuild. Bump geometry on those four
handlers so the edit repaints immediately.
Also remove REGEN/REGENALL/REDRAW/REDRWALL: the GPU raster
pipeline keeps the display continuously in sync, so on-demand
regen/redraw is a no-op concept in OCS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The .sv$ recovery copies only need to survive a crash, so they are removed on
a clean save (Save and Save-As both delete the file's .sv$ after writing) and
on a clean exit — a new exit_app() runs cleanup_autosaves over every open tab
before quitting, and all iced::exit() paths now funnel through it. A leftover
.sv$ therefore signals an unclean shutdown, i.e. something to recover.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A periodic subscription (every SAVETIME minutes — default 10, 0 disables)
writes a <name>.sv$ recovery copy of each dirty, already-saved drawing at its
own DWG version. Non-destructive: it never touches the original file or the
dirty flag, and skips unsaved (path-less) tabs. The SAVETIME command
sets/queries the interval and persists it. Recovery files (.sv$ and .bak) open
through the normal Open dialog — the loader detects DWG vs DXF from the leading
magic bytes, and a "Backup / Autosave" filter lists them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Drop the every-launch (re)registration thread. File association is now set up
once via the first-launch prompt (Yes → register + set default; No → decline,
persisted as file_assoc_enabled) and managed afterwards by the FILEASSOC
command. set_default_app now registers the handler entries (.desktop / mime /
ProgIDs) itself before asking the OS to default to us, since boot no longer
does — so the default never points at a missing handler.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Save: overwriting an existing file first copies it to a sibling <name>.bak
(default on; toggle with the ISAVEBAK command, persisted in settings).
- Open: .bak is a first-class type — the Open dialog lists it and the loader
detects DWG vs DXF from the file's leading magic bytes (the extension hides
the real format).
- File association registers .bak too, every launch (so users who associated
earlier get it automatically): Windows via the registry; Linux via a
high-priority shared-mime-info magic that resolves DWG/DXF content under the
.bak extension, with the generic *.bak glob claimed only once the app is the
default DWG handler — so it never hijacks other apps' backups.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two in-canvas confirmations on the Save-As path:
- AEC/Civil drop warning: when the drawing carries unsupported AEC/Civil
(application) objects that survive only as verbatim source-version bytes,
saving to a different version or to DXF would silently drop them. The
dialog reports the count and offers "Save in source version" (keep) vs
"Save anyway" (drop). Same-version DWG saves are lossless and skip it.
- Overwrite confirmation: when the chosen filename already exists in the
target folder, "Replace" / "Cancel" before clobbering it.
The two chain (AEC first, then overwrite) via per-flow acknowledgement flags
reset whenever the Save dialog opens or closes. Detection is a new
io::dropped_on_save_count over the document's Unknown (raw-passthrough)
objects/entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When the command line holds a typed-but-unentered command (or option
keyword / value), a viewport right-click now runs it, mirroring Enter.
Routed through CommandFinalize so the MText preview and grip-popup
guards apply and a non-empty line forwards to the submit path. All
other right-click behaviour is unchanged and applies only when the
command line is empty: right-drag orbits, the first right-click during
an active command acts as Enter, a second opens the context menu, and
an idle right-click opens the menu.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Integrate a large batch of standard CAD commands and fix several
name/behaviour mismatches, with no product references in code.
3D solids (reusing the truck B-rep pipeline):
- SLICE, INTERFERE, PRESSPULL, POLYSOLID, PYRAMID, SECTION
- 3DROTATE, 3DMIRROR, 3DALIGN (cached-solid transforms)
Annotation / text:
- ARCTEXT, SPLINEFIT (Catmull-Rom to Bezier), DIMJOGGED, OBJECTSCALE
(XData markers honoured by the existing geometry-gen / tessellator)
Blocks / misc:
- NCOPY (block-content extraction via explode_entity)
- OPTIONS, SYNCPVIEWPORTS, THICKEN, plus earlier toggles, aliases,
system variables, and layer/style/view commands
POINTCLOUD/RECAP and UNDERLAYLAYERS/UOSNAP are intentionally left out:
they require a proprietary binary / PDF-layer parser, a GPU point
renderer, and real test files.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replaces the opt-in `rmb_enter` setting (and `RMBENTER` command) with
always-on behavior. While a command is active, the first viewport
right-click acts as Enter (commit / close) and a second consecutive
right-click opens the context menu instead. Idle right-click still opens
the menu; right-drag still orbits.
The cycle is tracked per tab (`right_click_entered`) and restarts on any
other interaction — a left-click pick, a new command, an orbit, or
leaving the viewport — so the next right-click is Enter again.
Refines #185.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a configurable right-mouse-button behavior without disturbing orbit
or the context menu.
- New persisted setting `rmb_enter` (command `RMBENTER [ON|OFF]`, default
off): when on, a right-click while a command is active acts as Enter
(commit/close); when idle it still opens the context menu. Right-drag
always orbits, so nothing is lost.
- Right-click vs orbit is now time-based: orbit engages only after the
button is held >=150ms and the pointer moves, so a quick right-click is
no longer swallowed by slight pointer jitter (was an 8px distance gate).
- The right-click Repeat menu now lists commands from every source
(command line, ribbon, context menu, shortcuts) via a unified
recents list recorded at the dispatch choke point, instead of only
typed commands.
Closes#185
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keep the right-side status-bar tools from being pushed off the bar when a
drawing has many layouts: the layout tabs now live in a horizontal scrollable
that only takes the space left between the menu and the tools, with ‹ › arrows
(and the mouse wheel) to scroll them.
Repurpose the leftmost hamburger — which previously fired a no-op MENU command
— to open a dropdown listing Model and every layout (scrollable, current
highlighted); picking one switches to it, an outside click dismisses it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Swap the two "Free and open source" / "Community driven" text cards on the
start page for the intro-video thumbnail with a play badge; clicking it opens
the video in the system browser (new Message::OpenUrl → sys::open_url). The
bundled thumbnail Handle is built once via OnceLock — Handle::from_bytes mints a
fresh unique id per call, so rebuilding it per view re-decoded and re-uploaded
the JPEG every frame and the image only appeared after a long delay.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the custom model_tiles tiling with iced 0.14 pane_grid as the layout
source of truth, while paper-space floating viewports are left untouched (they
overlap/free-place, which pane_grid cannot model).
Each Model pane is its own shader widget rendering its camera into the pane
bounds; the renderer Primitive carries a base_slot so several shader widgets
share the type-keyed MultiPipeline storage on disjoint slots. A second pane_grid
of transparent mouse_areas (plus on_resize) layers above the crosshair overlay
to receive input — the overlay's Hidden cursor interaction otherwise levitates
the cursor and starves any layer beneath it. The active pane follows the cursor
(hover-activate), and grid / crosshair / UCS icon render per pane while the
ViewCube and render-mode picker stay on the active pane only.
Split / close / VPORTS presets and the VPort table round-trip now drive
pane_grid (guillotine reconstruction on load). Adds drag-to-swap via a controls
bar handle with a ghost-card preview, visible pane dividers from the pane_grid
split regions, a default model background of RGB(33,40,48), and removes all the
superseded custom-tile code.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The UCS icon now anchors to the projected UCS origin when it is on-screen
(falling back to the bottom-left corner), and becomes a selectable object:
hover highlights it, a click shows draggable grips, and dragging the origin
grip relocates the UCS while the X/Y tip grips rotate it. Drags snap to
geometry/grid through the existing snapper, and the new UCS is persisted on
release. The icon stays selectable while parked in the corner.
Also make the ViewCube compass (N/E/S/W) world-fixed: the cube body still
reorients with the active UCS, but the cardinals project through a camera-only
rotation and snap in world frame, so the directions no longer spin with the UCS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
