The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Route model, paper, viewport and nested block content through one traversal while preserving leaf renderers. Carry decoded material state into mesh shading and harden solid geometry conversion.
Extends the curved-face wireframe treatment from cones to spheres and tori, so
a solid built from those faces reads the way a cylinder already did.
ISOLINES: sphere faces get meridian lines across the face's colatitude span at
evenly spaced longitudes; torus faces get minor cross-section circles at evenly
spaced revolution angles. Both clip to the face's own parametric window (from
the boundary polygon via a shared `angular_span` gap-finder), so a partial
sphere or torus arc doesn't draw lines out over the missing part.
Silhouettes (DISPSILH): `CurvedGen` becomes an enum. A sphere silhouettes as
the great circle perpendicular to the view, clipped to the face window; a torus
as the two curves where the tube turns edge-on, traced around the revolution.
The silhouette now uses the camera's view *direction* alone, not the eye
position — a single parallel direction for the whole scene — so the outline
follows the view angle, holds still under pan, and doesn't foreshorten, which
is the orthographic silhouette a CAD wireframe expects.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ISOLINES show a curved solid from any angle, but its outline still cut across
whichever fixed longitudinal lines happened to face the eye. DISPSILH draws the
true silhouette — the two lines where a cylinder (or cone) turns edge-on to the
view — and it moves with the camera, so it cannot be a baked edge.
Tessellation stores a world-space generator per cone/cylinder face on the mesh
set (axis, radial frame, radius, cone taper, extent), sharing the face-extent
extraction with the ISOLINES collector. Each frame `upload_silhouettes` walks
those generators, solves `du·cosθ + dv·sinθ = -tanα·da` for the two edge-on
angles (`φ ± acos(...)`, `φ ± π/2` for a cylinder), and builds a line list in
the mesh vertex format — double-single, so it stays precise at UTM. It draws
through the existing wireframe / edge pipelines in the wireframe and
shaded-with-edges passes.
Gated on the document's DISPSILH header flag, which defaults off — so the
per-frame pass is a no-op unless the drawing asks for it. Scoped to top-level
solids: a block instance's generators aren't transformed by the INSTANCE pose
yet, so they are cleared on the block path (its isolines and feature edges
still draw).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Solid wireframes rendered every triangle edge of the tessellation, so a
curved solid read as a dense mesh instead of its real outline. Now each ACIS
solid's B-rep face-boundary edges are collected from the SAT `edge` records
(straight edges as segments, ellipse/circle edges sampled along their bounded
arc), body-transformed and split into the double-single pair, and stored on
the MeshLodSet. The block-instance and top-level offset paths transform these
edges alongside the mesh vertices.
The batch builder routes a solid with feature edges into a dedicated LineList
vertex buffer and skips its triangle wireframe; a mesh with no B-rep edges
keeps its triangulation edges. Edge colour follows the display mode: the flat
`fs_edge` shader draws the entity colour in the lines-only modes (wireframe,
hidden-line) and a `fs_edge_black` twin forces black for the edge overlay in
filled render modes.
Verified: the Clinic storefront arch bars now yield ~14-16 clean edge
segments (vs the full triangulation) bounded to the solid's true extent.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Opening / navigating a heavy 3D DWG (e.g. a BIM model with ~10k ACIS solids)
was effectively frozen. Several independent costs, all addressed here:
- Face3D edge/fill buffers were re-uploaded on every camera move (keyed on
camera_generation). They are world-space and selection-independent, so gate
them on (geometry_epoch, fill_mode) instead — a pan no longer re-walks every
wire.
- Solid meshes were drawn one buffer + one draw call per solid (~10k draws/
frame), which strangled the GPU front end. Concatenate every solid's LOD0
into a few large buffers (split only to stay under the 256 MB buffer cap) and
draw the whole set in a handful of calls. Built once per geometry epoch, so
selection / hover never re-pack it.
- Selection / hover highlight is now a small tinted overlay of just the picked
solids, drawn last with an Always-depth pipeline so it shows on top even when
the solid is occluded — instead of re-tinting and re-uploading all meshes.
- Hover / pick hit-testing scanned every triangle of every solid each move
(seconds on a heavy model). Add a 3D-AABB screen-rect broad phase
(MeshLodSet now carries z_aabb) and reuse the renderer's cached expanded mesh
set, so picking is O(solids) cheap projections plus the few solids actually
under the cursor.
- Block-internal hatch hit-testing exploded every INSERT on every hover.
Cache the result per geometry epoch and skip blocks that contain no hatch.
- Curved-surface (cone/sphere/torus) tessellation tolerance is now radius-
relative (CURVE_REL_TOL) so a cylinder's facet count is size-independent and
matches the circle/arc wire tessellation, instead of exploding on large radii.
Also adds docs/tessellation.md mapping every EntityType to its tessellation
path (truck B-rep vs truck curve topology vs direct).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
3D solid / surface meshes were the last single-f32 path. truck's mesh
tessellation now returns a paired verts_low residual (TruckTessResult::Mesh,
polygon_to_result), MeshModel/MeshLodSet carry it, the model-space offset
and block-instance transforms reconstruct the f64 position and re-split it
after subtracting world_offset, MeshVertex gains position_low (location 3),
and mesh.wgsl reconstructs the eye-relative position. Native SAT / ACIS /
OBJ mesh paths default to a zero residual (no regression — they were never
sub-f32 precise).
With this every world-space pipeline (wire, hatch, image, face3d, mesh)
is full double-single relative-to-eye; large-coordinate jitter is gone.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hakan Seven