The codec now holds wide EntityType variants boxed (MText, Helix,
Dimension, Hatch, Viewport, MultiLeader, Surface, Table, Ole2Frame,
Light, Extended). Constructors box their entity; nested patterns reach
a dimension through entities::dimension::as_dimension(_mut). Also
follows BlockAction::action_ids, LineTypeComplexData::source_flags and
the decimal tab stop with an explicit character.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
world = insert_point + Rot * Scale * (P - base_point). Attribute placement, EXPLODE, XCLIP storage, REFEDIT's working copy, the UCS reframe of attributes and the dynamic-block visibility grip ignored the base point and were offset by Rot*Scale*base. They now share insert_transform_with_base. Creation stores a ZERO base and redefine resets it; a no-op redefine moves nothing; the Block Definition dialog prefills the base from the definition. XCLIP filters stored by older builds keep their old displacement.
Fixes:
- Hover state no longer drops when the pointer moves up from one strip
icon, group grip or title bar to the one above: iced handles the
element above first, so the old element's "left" (None) cleared the
hover just set. Leave messages now carry the element and only clear
their own hover.
- The drop preview used the pallets' own widths; it now uses the
group's width, matching where the pallet lands.
- Group indexes from messages (group grab, splitter) are looked up
safely, so a message from before a layout change no longer panics.
- Floating placements read from the config are healed (finite, positive,
at least the minimum size), like the group weights already were.
- The shown group's edge bar is centred in its row: a stack takes its
height from its first layer, and the icon column was shorter than the
row. The "Drag to move group" tooltip is removed.
Simplifications (no behaviour change):
- dock_open_at_default / dock_unpeek replace seven copies of "dock on
the right if unplaced, then reveal" and four of "stop peeking".
- The drop target takes the grab offset as a parameter, so a drag
update stores its state once.
- dock_set_open, ensure_settings, the shown-index bookkeeping after a
group is removed and the on-screen width clamp each lose duplication.
- VBarLabel drops options its single caller never varied.
- The drop preview's landing computation is one helper.
Naming and consistency: pallet names in the + menu, the drag ghost and
the floating title bar go through t!(); StripHit::Tab becomes
StripHit::Join; stale comments updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
No intended behaviour change except the fixes noted below.
- One drag state: a single `DockDrag` (move pallet / group, width,
splitter, floating size, Layer Manager column) replaces nine fields
(dragging, dragging group, resizing, split, float resizing, origin,
target, grab offset, layer column flag) that had to be kept in sync.
- `dock_expanded` becomes `dock_peek` with one meaning: a pallet revealed
although it auto-hides. `dock_reveal(id)` shows a pallet's group and
peeks it; commands that open a pallet now use it, so opening a pallet
also switches its edge to that pallet's group.
- Each group stores its own width (falling back to its widest pallet's
width until first sized), instead of every pallet's width being kept in
sync. Pallet widths now only size floating pallets and new groups.
- One `dock_set_open(id, open)` holds every pallet's open and close path.
- Leftovers removed: the tab-group config format that never reached main,
the multi-tab drag ghost header, the separate icon-hover message.
Fixes:
- Hovering a strip icon reveals an auto-hiding edge again (the icons had
lost the hover message in the option B strip). Covered by a test that
moves the pointer over the icon in the real view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- SSM* / SS* sysvar messages and the Place on Sheet prompt go through
t!/tf!, reusing the existing catalog entries where they exist; one new
key (integer range) is translated in all 21 locales.
- The SETVAR prefix is matched case-insensitively.
- The stale "SHEETSET ... not yet implemented" key is removed from the
catalog and every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Restore the web no-op of `sync_drawing_locks` and keep
`stamp_sheet_set_data` (called only by the native save) out of the web
build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wizard's folder scan, Import Layout as Sheet, the template layout
lists and the drawing cache behind Model Views, Place on Sheet, callout /
label blocks and block previews parsed whole DWGs on the UI thread. They
now go through the shared `background_task` worker: a cache miss reads the
drawing and handles the message that needed it again. Block previews lend
the cached drawing to the preview scene instead of cloning it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Place on Sheet gives its viewport a unique id (shared
`Scene::next_viewport_id`, also used by the normal viewport commit).
- Renaming a sheet's layout in an open tab records undo and marks the tab
modified; in a closed drawing the previous file is kept as `.bak`
(ISAVEBAK) before it is written back.
- New Sheet saves the drawing before the `.dst`: a failed save leaves no
sheet behind.
- Rename & Renumber Previous/Next no longer panics on an empty list.
- Leftovers: unused binding, a hard-coded localized Documents path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A VIEW record's centre is an offset from its target in view coordinates.
Views saved by earlier versions stored the target itself as the centre;
treating that as an offset put them (and VIEW plots) at about twice the
coordinates. One shared `named_view_center` now resolves the centre in
f64 (DVec3/DQuat), taking a centre equal to a non-zero target as the old
convention; VIEW RESTORE, the view plot window and Place on Sheet use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `.dst` read/write go through native-only helpers (a browser answers
"Not available"); the folder pickers are web no-ops; time stamps use
iced::time (web-safe).
- Lock files are written only for drawings that are sheets of an open set,
released when the last set closes, and a lock a crashed session left
(recorded with its process id, same user and machine) is taken back.
The `.dwl2` header is well-formed and the date line comes from the OS
long date on every platform. The 1 Hz poll runs only while a set is open.
- Refreshing sheet set fields never stores `####`: fields no open set
resolves keep their value, and only the hosts that changed are redrawn
(and their tab marked modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A drawing's sheet set fields are refreshed when it opens with sets loaded.
- VIEW WINDOW <name> <x1,y1> <x2,y2> saves the plan view of a window.
- opencadcodec: block-attribute fields use their block reference's layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Row menus open Set category / Place Callout Block as fly-out submenus
(hover or right press; leftwards when the palette is docked right).
- List of Blocks and Select Block show the Blocks palette's preview.
- VIEW SAVE keeps the window's width/height ratio.
- Placing view content in model space is refused with the reference message.
- Drawings read for views, placement and blocks are cached by modification time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model Views lists named model views and places them on the current sheet
(xref, viewport, paper-space named view, view label with navigation
fields, sheet view record); sheet view rows get Display, Rename & Renumber
View, Set category, Place Callout Block and Place View Label Block; the
View Category dialog's Add Blocks opens List of Blocks / Select Block; a
sheet whose relative path is gone shows missing; sheet set fields store
their values when a set changes; named views keep their centre relative to
the target. Codec pin moves to the revision with these field helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import Layouts as Sheets shows the reference's statuses (already part of
a sheet set / may belong to another sheet set / available) and Browse
replaces the list; the Field dialog SheetView tree lists sheet views with
their properties, scale formats and hyperlinks; drawings open in tabs get
.dwl/.dwl2 lock files that other instances read as open; the codec pin
moves to the revision with sheet views and the default output folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Remove Sheets confirmation, Open in drawing editor, Select Layout as Sheet
Template for subsets that prompt, Import Layouts as Sheets with status and
prefix, Rename & Renumber options with Previous/Next and real layout/file
renames, New Subset folder hierarchy and publish setting, subset properties
rows as the reference shows them, sheet status badges (SSMSHEETSTATUS /
SSMPOLLTIME), Sheet Views by category with the View Category dialog, Model
Views locations, Field dialog SheetSet/SheetView navigation, and .dwt/.dws
read as DWG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tree menus follow the reference per row kind (New Sheet / Import on a
sheet work on its subset, Remove Subset only while empty, Rename Subset),
a new sheet is not opened, an open set reloads when its .dst changes on
disk, ViewportScale placeholders take the version of their format and
the codec pin moves to the revision with navigation fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
