Sync projection controls from the active camera, preserve the UCS icon in perspective views, and use visible or selected 3D geometry for orbit pivots. Dense mesh vertex grips remain hidden.
The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The subdivision MESH converter emitted one snap candidate and one key
vertex per mesh vertex — ~56 B/vertex retained in every copy of the
wire set. On NWD-scale imports (#358: tens of millions of vertices)
that is GBs spent on snap targets far too dense to distinguish on
screen. PolyfaceMesh and PolygonMesh already ship empty tables at any
size.
Above 50,000 vertices, ship none. Smaller meshes (including the #358
repro sample at 34.6k vertices per mesh) keep vertex snap unchanged.
Measured (mem_probe_meshent, 1M-triangle MESH): 646 -> 589 B/face
resident; wire content 210 -> 183 MB per 1M triangles.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A wide polyline draws a solid band, but hit-testing only ever saw the
centreline 8 px out, so a donut could only be selected by clicking the
phantom circle inside the disc it paints. `self.hatches` — the map the
hatch pick channel walks — is filled from HATCH and SOLID alone, so the
band `wide_fills` produces was drawn (via `synced_hatch_models`) and never
picked.
The band rides in on `pick_tris`, the same channel a thickness wall uses:
`wide_fills` already computes it, so it costs one tessellation and inherits
the block transform. It ear clips rather than fans — an arc band is an
annular sector, concave on its inner edge — reusing `triangulate_planar`.
Wiring `pick_tris` through `Lines` alone was not enough: a plain wide
polyline leaves `to_truck` as `Contour`, and a PLINEGEN=0 one as
`SegmentedLines`. Both now carry it.
This needs the wire's cullable box to cover the band, and it did not.
`bounding_box()` boxes a polyline's stored vertices, knowing nothing of the
width painted around them: a donut's two vertices sit on one horizontal
line, so the box had zero height and rejected every click on the disc
before any triangle was tested. Every site that stamps the entity box onto
a wire now goes through `set_wire_aabb`, which widens it over `pick_tris`
(a no-op for the entities that have none, which is nearly all), and the
block cache chains `pick_tris` into its own box for the same reason.
That box was already too small for the centreline itself — an arc leaves
the vertex box — so a donut was unselectable at its top and bottom at
enough zoom. Widening fixes that too.
Verified end-to-end: tessellate a width-0.5 donut on a 0.05 centreline
radius, then `click_hit` five points 20 px clear of the centreline — all
land, and a click outside the disc still misses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PolyfaceMesh and SubD Mesh faces were fan-triangulated from vertex 0, which
is only valid for convex faces. A concave face (e.g. an L-shaped / notched
n-gon) fanned into triangles that spill outside the outline — spurious
"triangles that shouldn't be there" that covered neighbouring geometry and
its edges. Replace the fan with an ear-clipping triangulator that projects
the planar face to 2D, respects its winding, and clips only real ears, so
concave faces triangulate to exactly their own area. Convex faces (and the
cylinder-cap n-gons) are unchanged in result. Falls back to a fan for a
degenerate / self-intersecting polygon.
Verified on Annotation-2D-Mesh-Solid-BIM.dwg (concave 5-/6-gon mesh faces)
and by a unit test: a concave L-hexagon triangulates to n-2 triangles whose
total area equals the polygon's, with no overshoot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rewrite each entity's property builder to the per-entity group/row spec:
the correct sections (Geometry, Misc, Text, Pattern, Lines & Arrows, Leaders,
Block, …) with the spec's rows and real computed values — Diameter,
Circumference, Area, Delta X/Y/Z, Angle, Total angle, Arc length, Radius ratio,
etc. — plus apply routing for the editable rows.
Covers ~26 entities (Line, Circle, Arc, Point, Ellipse, Spline, polylines,
Ray/XLine, Insert, Text, MText, Hatch, Leader, MultiLeader, Tolerance, Solid,
Solid3D/Region/Body, meshes, MLine, Raster/Wipeout, Underlay, Table, Viewport,
Attribute, OLE). The 3D Visualization/Material group and the full Dimension
spec are deferred (they need document access for material/dimstyle name
resolution). Rows whose data is not in the pinned acadrust revision are shown
as empty placeholders, to be filled when the dependency is bumped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Groundwork for making the Properties panel conform to the per-entity group/row
spec (PROPERTIES.md). The panel already renders a Vec of sections, but each
entity could only express a single geometry section.
Change PropertyEditable::geometry_properties (and the EntityTypeOps enum
dispatch) to return Vec<PropSection>, update the two impl macros, and flatten
in properties_sectioned so the panel shows [General] + the entity's groups.
Every entity builder is wrapped to return its existing section as a one-element
Vec — pure mechanical change, no rows or titles altered, panel output identical.
Enables Phase 2: rewriting each entity's groups/rows to match the spec.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TruckEntity.snap_pts is now DVec3 and every entity producer builds snap
candidates straight from the acadrust f64 coordinates instead of casting
to f32 first (text, mtext, arc, circle, ellipse, point, shape, solid,
mline, mtext, attribute, tolerance, table, underlay, ole2frame, mesh,
multileader, dimension, block-cache). offset_snap_pts stays f64
throughout. Still offset-relative (inert) — but snap precision is no
longer capped at ~0.5 m by an early f32 cast, which fixes a latent
UTM-scale snap error and sets up the absolute-coordinate switch.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grip markers drew visibly offset from the entity on large-coordinate
(UTM-scale) drawings: every Grippable impl cast the f64 entity coordinates
to f32 BEFORE the world-offset subtraction, and at 1e7 magnitude an f32
holds ~0.9 drawing units of rounding error. The wires subtract the offset
in f64 first (precision-preserving), so the grips landed up to ~1 unit
away from the geometry they belong to.
GripDef.world is now DVec3: producers fill it straight from the f64
entity data, refresh_selected_grips subtracts the world offset in f64,
and only the small offset-local result is cast to f32 for screen-space
projection (grips_to_screen / find_hit_grip) and drag state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Closes out the 3D-entity audit. Mesh (modern SubD mesh) gained a full
render impl since it had no TruckConvertible / Grippable / PropertyEditable
hookup at all — it was silently dropped on open. Remaining mesh-style
entities pick up the few fields the parser populated:
- Mesh (SubD): wireframe + face-fan fill_tris rendering, per-vertex grips,
Properties panel surfaces version, subdivision_level, blend_crease,
creased-edge count, vertex / face / edge counts; wired into the
Transformable / Grippable / PropertyEditable / TruckConvertible
dispatch in entities/traits.rs
- Polyline3D: smooth_type, default_start_width, default_end_width,
mesh_m_count, mesh_n_count, smooth_m_density, smooth_n_density
(widths editable)
- PolygonMesh: smooth_type, m/n_smooth_density, elevation, normal
- PolyfaceMesh: smooth_surface, seqend_handle, elevation, normal,
thickness
Solid3D / Region / Body's uid + silhouettes + history_handle were
included in the prior 2D commit since they share the same file.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Entity converters were casting WCS coordinates to f32 before the renderer
subtracted world_offset, which destroyed sub-unit precision on drawings
sitting at large coordinates (typical UTM-style CAD files). The multileader
case made it visible — glyphs warped under rotation — but every entity
that emits TruckObject::Lines/SegmentedLines/key_vertices/fill_tris was
affected.
Type changes (in src/scene/acad_to_truck.rs):
- TruckObject::Lines / SegmentedLines: Vec<[f32; 3]> → Vec<[f64; 3]>
- TruckEntity::key_vertices / fill_tris: f32 → f64
All ~17 producer files updated to keep WCS coordinates in f64 right up to
the TruckEntity boundary. The consumer in scene/tessellate.rs now performs
`(x - ox) as f32` (f64 subtract, then cast) for points, key_vertices, and
fill_tris — preserving precision near the camera origin even when the
drawing sits at million-unit coordinates.
catmull_rom_pts (multileader spline) is now f64; the scene path widens its
offset-relative f32 ctrl points to f64 around the call and narrows back at
the output.
Notes:
- Table layout still uses glam::Vec3 (f32) internally; widened to f64 only
at the TruckEntity boundary for type compatibility. Separate cleanup to
switch its internal math to f64 is tracked.
- snap_pts and tangent_geoms remain f32 — they are UI feedback (snap
candidates, tangent hints) and the precision is sufficient there.
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Hakan Seven