Sync current main and companion codec changes before preserving unsupported frame rows, rendering in the entity plane, and sharing final layout metrics with placement preview.
Share source buffers across block placements and render nested content with GPU instance transforms.\n\nChunk silhouettes and compact mesh material data so large drawings stay under device buffer limits and remain responsive.
The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Route model, paper, viewport and nested block content through one traversal while preserving leaf renderers. Carry decoded material state into mesh shading and harden solid geometry conversion.
The horizontal attachment point was read from the entity-level field,
which only exists from R2010 on; older records (R2007 and earlier) left
it at the default and centre/right-attached leaders shifted. The
annotation context carries the same value in every version, so anchor
from there for both the render and the width-grip geometry.
acadrust bump also brings: the R2007 MULTILEADER tail gating (leaders no
longer render upside-down), the R2004-R2006 inline SAB payload read, the
v1-SAT wireframe point_present decode (3D solids/regions land in place
on R2000/R2004), and the XCLIPFRAME default of 2 so clip-frame borders
draw on files whose header omits the variable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The annotation context is AutoCAD's baked display state; the renderer
now trusts it instead of re-deriving:
- text_attachment_point (L/C/R) is the stored horizontal anchor — the
leader-side guess shifted centre/right-attached texts by their width.
- ctx.text_direction/text_rotation apply as stored; forcing the
Horizontal angle type to 0 un-rotated angled leaders. The conn.y
baseline snap now applies only to unrotated text.
- The dogleg runs along the leader root's stored direction (angled
leaders drew it world-horizontal), and vertically-attached leaders
draw no dogleg at all.
- Underline attachments (BottomLine / BottomOfTopLineUnderline…) draw
the leader-coloured rule under the attached line(s), full text width.
- Vertical text flow (ctx.text_flow_direction) feeds the shared
vertical layout; frame/background boxes wrap the laid-out glyph
bounds padded by ctx.landing_gap, and run-less decoration strokes +
inline \C colours reach the output instead of being dropped.
- The wrap-width grip rides the shared flow_grip_axis() (rotation, flow
and attachment side), and its drag projects on the same axis.
acadrust bump: every MULTILEADER decodes (has_ds peek), MTEXT
top-to-bottom direction reads correctly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every angle row went through the linear formatter, so switching LUNITS
to Architectural showed a block's Rotation as feet-and-inches — and the
string wouldn't parse back, wedging the field until it was cleared and
retyped. Only the decimal/fractional LUNITS survived by accident.
New edit_angle row helper formats angles with format_angle
(AUNITS/AUPREC: decimal degrees, DMS, grads or radians), applied to all
17 angle rows (rotations, obliquing, arc start/end, hatch pattern
angle, multileader text rotation). parse_angle_deg converts every
AUNITS display form back to degrees ("30°"/"30d", DMS 30°15'20",
33.33g, 0.52r) and parse_f64 falls back to it, so the displayed value
round-trips through an edit.
Closes#297
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two things an MTEXT can ask for that the layout ignored, both found on the
same drawing (budweiser2018.dwg handles 8782 and 2609).
Columns: `column_data` was read but only ever reached the properties panel,
so a three-column MTEXT ran as one stacked block. Each line now carries the
column it belongs to, the row counter restarts per column, and wrapping
measures against the column rather than the block — measuring against the
block would let a line run across the gutter and over its neighbour.
Paragraph alignment already worked, which is what made the bug read as
"columns are there but misplaced": `\pxqr;` pushed col3 to the right edge
either way.
Only explicit `\N` breaks move to the next column. A column that fills up
does not spill into the next on its own — `heights` / `auto_height` are not
read, so a column runs as long as its content.
Stacking: `\S1/2;` was flattened to the literal "1/2", which is why the
line then overflowed its 7.26-wide box and dropped `°C ª` onto a second
row. The halves now share one horizontal slot, drawn at a shrunk height
with the numerator lifted, so the slot is as wide as the wider half. `^`
stacks without a rule; `#` stays inline `num/den`, which is what a slanted
fraction reads as and needs no second baseline.
The fraction rule rides a run-less stroke group: a group carrying a
`GlyphRun` renders as SDF quads with its strokes suppressed, a run-less one
keeps them, and the rule is plain geometry rather than a glyph.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the entity Properties panels to the standard CAD layout and
web-verified behaviour:
- Text: combined Justify (horizontal x vertical) dropdown; Position and
Text-alignment rows become editable/grayed by justification; drop the
Annotative-scale row.
- MText: combined Justify; editable Direction, Line space distance
(back-solves the factor) and Line space style; Defined width/height
gated on column mode.
- MLeader: regrouped to match the palette - drop the Leader Structure
group (fold landing rows into Leaders), gate Text vs Block on content
type, full 9-value attachment label set, resolve handle-backed rows
(style, text style, arrowhead, linetype) to names.
- Leader: Lines & Arrows / Text / Fit are resolved from the dimension
style (arrowhead, arrow size, dim-line lineweight/colour, text gap,
vertical text pos, overall scale); Current Vertex navigator; combined
Type; Geometry group after General; no 3D-Visualisation group.
- General: rename "LT Scale" to "Linetype scale"; show ByLayer
transparency by name. Add shared num_prop helper for conditionally
editable numeric rows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render MultiLeader labels from the stored context fields instead of
re-deriving them:
- Draw each leader line with the line's own path type (code 170) rather
than the MultiLeader's overall/style type. A spline-style leader can
carry straight lines; splining a straight two-point run through
Catmull-Rom bowed it, so the leader looked wavy with a dirty elbow.
- Drop the stray landing segment that ran from the dogleg end up to the
text's top-left insertion, leaving just the horizontal dogleg.
- Anchor the horizontal-leader text so its bottom line sits at the
connection point (the box then spans connection.y → text_location.y,
matching the writer's content_base_point + landing_gap geometry).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rewrite the in-app MTEXT editor to run on acadrust's structured
MTextDocument model end-to-end: load via parse_mtext, edit a flat Cell
model, serialize via to_mtext_string. Retires the hand-rolled format-code
string handling, the parallel visible_spans parser, the composed_value
prefix, and the Edit-raw-code tab.
Selection and copy:
- double-click selects the word, triple-click selects all (click-counting)
- Ctrl+A selects all text
- Ctrl+C copies the selected text to the clipboard
Formatting:
- per-selection Bold/Italic/Underline/Overline/Strike/Case/Alignment
- Bold renders as a visibly thicker SDF pen, keyed (family, char, bold)
through the whole text pipeline; the resolved style font name is stamped
so the \f...|b1; code survives serialization
- per-selection font and color changes
- editor color dropdown reuses the Properties panel color selector
Global toolbar defaults (font/color/oblique/width/tracking) fold onto the
document as real span properties instead of a leading code prefix; a
trailing empty paragraph is preserved so Enter at the end keeps its line.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two defects in the in-app MTEXT editor, both surfaced once the preview
text became visible:
1. Invisible preview text. After the SDF text migration, tessellate emits
glyphs as SDF quads on `text_verts` and leaves the polyline `points`
empty, but the editor preview draws on a 2D canvas that can't run the
SDF shader — so only the selection box showed. Add a `force_text_strokes`
parameter to tessellate: when set, TEXT/MTEXT run-groups also emit their
glyph outline strokes as points. The preview passes true (real stroke
font, aligned with glyph_boxes); every other caller passes false and
keeps SDF-only text.
2. Enter did not start a new line. mtext_type inserted a literal newline,
but the MTEXT layout only breaks on the `\P` code (a raw 0x0A is a break
only to the caret logic). Normalise every literal newline — from Enter or
a multi-line paste — to `\P`, so the line breaks and the saved value
stays standard.
Closes#308
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDF is the only text renderer now — the stroke path and its LOD ladder are
gone, and the remaining text kinds render as SDF glyph quads too.
- ATTDEF / ATTRIB: carry a GlyphRun so single-line attribute text renders as
SDF (multi-line already did via layout_mtext). Tolerance / complex-linetype
text already SDF.
- Remove `sdf_text_enabled()` (the OCS_TEXT_SDF flag / kill switch) and take
the SDF path unconditionally everywhere: tessellate Text arm (per-group by
GlyphRun presence), hit_test fallbacks, render gather, complex_lt, table,
mleader.
- Delete the text LOD ladder: tess.rs baseline/greek block and the
block_cache greek/baseline path (emit_greeked_text / emit_text_baseline),
plus the now-dead helpers text_baseline_points / text_greek_obb_tris /
text_obb_corners_native / mtext_line_count and the LocalWire
text_height_local / text_obb_local fields. All text is crisp at every zoom;
text entities are exempt from the sub-pixel stub cull.
- Fix a latent bug: block-internal SDF text was culled because its LocalWire
aabb_local was [0,0,0,0] (no points) — fold the glyph-quad extent into
aabb_local and exempt text_verts-carrying wires from the sub-pixel cull.
- Clear the pre-existing dead-code warnings (TextPlacement.elevation, TabKind,
MTextRunKind::Tab).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render the MTEXT background (never drawn before — the flags were only shown
read-only in the panel) and make it editable.
- Text arm emits an opaque fill_tris rect behind the glyphs: flag 0x01 uses
the entity background colour, 0x02 uses the canvas colour (a wipeout-style
mask). Box = glyph bounds padded by (background_scale - 1) × text height.
- Text frame (flag 0x10) draws a closed rectangle in the text colour around
the same box.
- Threaded `bg_color` into `tessellate()` (+ all callers and the
MultiLeaderTess trait) so the mask can use the drawing-window colour.
- Properties: "Background mask" is a Off / Fill / Mask dropdown, "Background
color" is its own colour picker (independent of the entity colour — new
PropBgColor* messages; picking a colour switches to Fill mode), and "Text
frame" is a checkbox toggle. Edits re-tessellate so the change shows live.
Renders via the face3d fill path, so the fill shows with FILLMODE on (same as
MLEADER background fill); the frame is a stroke and always shows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reclassify every property row to match standard palette behaviour: a row
is editable only when its value maps directly to a stored field AND its
apply_geom_prop handler is wired; computed/derived/count/handle/
cross-object values stay read-only.
Newly editable (all apply-wired): attribute tag/prompt; ellipse major
radius; hatch Double; lwpolyline closed/linetype-gen; mline style;
multileader annotative/landing/background-fill; polyline 2D+3D vertex
coords/segment widths/linetype-gen; shape style; spline control/fit
point coords, weight, fit tolerance, tangents; table break-option flags;
text alignment point, upside-down, backward; underlay display flags.
Corrections: spline Degree -> read-only (editing desynced the knot
vector); removed a duplicate leader "Arrowhead" row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rewrite each entity's property builder to the per-entity group/row spec:
the correct sections (Geometry, Misc, Text, Pattern, Lines & Arrows, Leaders,
Block, …) with the spec's rows and real computed values — Diameter,
Circumference, Area, Delta X/Y/Z, Angle, Total angle, Arc length, Radius ratio,
etc. — plus apply routing for the editable rows.
Covers ~26 entities (Line, Circle, Arc, Point, Ellipse, Spline, polylines,
Ray/XLine, Insert, Text, MText, Hatch, Leader, MultiLeader, Tolerance, Solid,
Solid3D/Region/Body, meshes, MLine, Raster/Wipeout, Underlay, Table, Viewport,
Attribute, OLE). The 3D Visualization/Material group and the full Dimension
spec are deferred (they need document access for material/dimstyle name
resolution). Rows whose data is not in the pinned acadrust revision are shown
as empty placeholders, to be filled when the dependency is bumped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Groundwork for making the Properties panel conform to the per-entity group/row
spec (PROPERTIES.md). The panel already renders a Vec of sections, but each
entity could only express a single geometry section.
Change PropertyEditable::geometry_properties (and the EntityTypeOps enum
dispatch) to return Vec<PropSection>, update the two impl macros, and flatten
in properties_sectioned so the panel shows [General] + the entity's groups.
Every entity builder is wrapped to return its existing section as a one-element
Vec — pure mechanical change, no rows or titles altered, panel output identical.
Enables Phase 2: rewriting each entity's groups/rows to match the spec.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- expand_defn: dedup the <1px baseline LOD branch the same way the <5px
greek branch does, so colour-split MTEXT no longer stacks N overlapping
baselines (one per \C segment) over the same OBB.
- sysfont: memoise canonical_family_name process-wide. resolve_font calls
it once per word on the MTEXT measure hot path and Face::resolve re-runs
it right after; the fontdb query + linear family scans were uncached.
- dimension/multileader/table: reword the 6 fill_tris_low FIXMEs. They
cited a stale line and the wrong consumer — these fills render on the
top-level path (panic-safe .get().unwrap_or), not the block cache, so
they cannot trip emit_wire's debug_assert. State the real status:
latent f32-precision debt, not a crash. Also fix the mis-indented
text-fill WireModel in dimension.rs.
- tests: add a host-independent colour-split test (two \C segments in a
block keep ≥2 distinct wire colours — guards the per-wire colour fix)
and a TTF-gated UTM fill test (paired, non-zero fill_tris_low). Note the
arial-style test's LFF-fallback limitation.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
dimension.rs (x2), multileader.rs (x3), table.rs (x1) emit fill_tris
without a corresponding fill_tris_low. These will trip the debug_assert_eq!
added in the preceding commit when the entity appears inside a block
definition. Each site is marked with a FIXME referencing block_cache.rs:1397
and the correct fix pattern (split_ds on each vertex).
Text elements previously rendered as hollow wireframe outlines and sometimes
fell back to the wrong system font due to case-sensitive exact matching. Also,
the viewport background grid drew on top of solid entities.
Case-insensitive and partial-name fallback matching (e.g., mapping "arialn"
to "Arial Narrow") is now added to `sysfont::canonical_family_name`, ensuring
text resolves to the correct installed system font.
TrueType font contours are now triangulated into solid fills (`fill_tris`)
using `lyon_tessellation` in `ttf_glyph.rs`. To prevent the GPU from misclassifying
this 2D text as a 3D mesh (which broke flat shading), text tessellation splits
the output into separate outline and fill `WireModel`s.
The background grid is extracted from `SelectionCanvas` into `GridCanvas` and
moved beneath the 3D viewport to ensure proper layering. Finally, `DepthBiasState`
is enabled on all face/fill pipelines to apply a polygon offset, perfectly
resolving Z-fighting between coplanar wireframe lines and solid faces.
Clean up the remaining `let [ox,oy,oz] = [0,0,0]` bindings and their
zero-valued add/subtract arithmetic across scene/mod.rs (mesh LOD resplit,
model AABB, wide-polyline fills, wipeout boundary, hatch/solid models,
insert/entity AABB), table, multileader and xclip. Coordinates now read as
the plain absolute values they are. No world_offset reference remains.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Now that geometry reaches the GPU/CPU as absolute coordinates via the
double-single relative-to-eye path, world_offset is always [0,0,0]. Strip
the parameter that was threaded through the whole tessellation / block-
expansion / fallback / camera-decode chain and the ExpandCtx field that
carried it — ~340 references across 20 files, all subtracting zero.
- truck_tess: to_local / to_local_low / tessellate_* drop the offset arg;
to_local is now a pure double-single split.
- tessellate: offset_to_ds → points_to_ds (pure DS split); tessellate(),
tessellate_entity(), fallback_geometry(), solid_wire_fallback(),
entity_aabb(), expand_insert(), expand_block_meshes(), the dimension
helpers (vec3_local, dimension_snap_pts, …), text_support, leader,
multileader, image_model, xclip and camera_from_view all lose the param.
- block_cache: ExpandCtx loses its world_offset field.
- Remove the now-dead offset_snap_pts and the unused set_grid_snap.
Behaviour is unchanged (the offset was zero everywhere); the compiler
verifies every call site.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
WireModel/LocalWire/BatchEntry key_vertices are now Vec<[f64; 3]>;
tessellation keeps them in f64 (no f32 cast at offset subtraction),
producers (dimension, leader, multileader) build them from the acadrust
f64 source, the block-cache transform keeps f64, and the face3d Face3D
quad path splits them into the double-single (high, low) pair. Consumers
(snap endpoint/midpoint, xclip) read via f32 at the leaf. Still
offset-relative (inert); endpoint/midpoint snap is no longer f32-capped.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
TruckEntity.snap_pts is now DVec3 and every entity producer builds snap
candidates straight from the acadrust f64 coordinates instead of casting
to f32 first (text, mtext, arc, circle, ellipse, point, shape, solid,
mline, mtext, attribute, tolerance, table, underlay, ole2frame, mesh,
multileader, dimension, block-cache). offset_snap_pts stays f64
throughout. Still offset-relative (inert) — but snap precision is no
longer capped at ~0.5 m by an early f32 cast, which fixes a latent
UTM-scale snap error and sets up the absolute-coordinate switch.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
WireModel/LocalWire/TruckEntity snap buffers and the producers/consumers
now carry snap candidates as DVec3 (offset_snap_pts, dimension/multileader
producers, block-cache transform, pick/xclip, snap module). Still
offset-relative, so behaviour is unchanged — this just lets the snap
transport survive the upcoming switch to absolute coordinates without an
extra f32 quantization. The snap module still resolves in f32 (as_vec3 at
entry), matching today's precision.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Hakan Seven